Laptop won't turn on after the new battery.

Similar Questions

• Computer won't turn on after the mode 'sleep'

  My computer acted funny lately when it goes into mode 'sleep', and I have to reboot it until I can do something new. I know I'm not the only one having this problem, I've read the other posts on this problem. Anyway, my keyboard has a sleep button that I brush occasionally, that causes all this to happen. However, I brushed it today, and instead to go just in a coma, the computer entered into mode 'sleep' (the light was orange, noise died down), then woke up to the top in a way where the fan on, but the light went off. I've forced to close and then turned back on. Now when I turn it on, the light and fan both going on, but the monitor remains off, and none of the lights on the keyboard lights up. Is there a simple solution to this, or it will need repairs?

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below.

  The problems of wake the computer from sleep mode

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Hope this information helps.

• Computer laptop 15-p047na: laptop won't start up after the Win 8.1 update

  I bought this laptop on 16 December and got with the transfer of files and my old desktop PC applications.  Everything is OK until last Sunday, when I left the laptop is a Win the day update 8.1 overnight.  The next day, he asks for a restart, but then, after initial HP logo, the screen turns white for a few minutes.  Then the Win 8 screen with a message: "LogonUI.exe - Application error.  The instruction at 0x00b1645a referenced memory at 0x00000008. The memory could not write. »

  When I click OK, the screen turns off then flashes.  The message appears again, with the same result.  I tried to start the computer from a CD and a USB key, after changing the boot sequence in the screen of the BIOS/UEFI, but with the same result.  What should I do?  Help welcome!

  Hi @agniculus ,

  Welcome to the HP Forums!

  It's a place dynamite to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that after a Windows 8.1 update, that your system does not start properly.

  First of all have you tried a hard reset?

  Here is do a Hard Reset or forced to reset.

  Here is a link to the computer does not (Windows 8) which can also help.

  You can also try of using Microsoft System Restore (Windows 8) back to the front, what happened.

  You can start safe mode?   Safe mode of Windows 8

  Safe mode, you should be able to run the troubleshooter and do the restore.

  Good luck!

• Laptop won't turn on but the burton on light on

  My daughters laptop a lack of battery have put on the charge and turned on the light on turns on but that's it is not do anything he was in charge for a few hours!

  Hello @Gill8,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  @SDJL is currently out of the office, so I'll take for it.  I understand that you were able to solve the problem with the battery.  It seems you did a Hard Reset, to discharge the battery.  Sometimes this can help resolve problems with the battery does not as it should.  If you have additional questions, feel free to post again.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Windows Firewall won't turn on after the Trojan horse

  Hello

  I have windows 7 starter edition. I recently had a Trojan virus on my computer, it was called Trojan:Win32 / Ramnit.A
  This virus had caused me to not be able to turn on my Security Center, but now it was fixed and the Security Center now works. However, my Center of the action is to tell me I need switch my firewall, but it doesn't let me it says: Action Center can't turn on the firewall. So I clicked on activate manually but when windows firewall comes up it says "windows firewall does not use recommended settings to help protect your computer. Next to the post is a button that says "use recommended settings, but when I click on it an error message comes up saying:"firewall Windows cannot change some of your settings. "  Error code: 0 x 80070424. I used diagnose and automatically fix problems of Windows Firewall service (Microsoft fix it)... I ran the program and after troubleshooting had finished, he said that 2 problems have been detected:
  1. Windows could not start the windows firewall.
  2. Windows firewall service is not started.
  None of them have been set.
  Help, please!
  Camille

  It could be that you are still a few remnants of the virus. Take a look at this site for some good information.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards

• HP G62:. Hp G62, laptop won't turn on even after trying hard. Help

  My laptop won't turn. Home from work two days ago and I tried turning on but nothing works. I read through messages to hard test but failed. I don't hear any sounds on my laptop either. Can someone please help me understand what I need to do to get my laptop running. Thank you

  Thank you. . No light even after plug in the laptop. I've never seen a light on the power adapter even when he was working. Where is the light on the adapter? Please help I feel empty without my cell phone

• HP-G62226TU: my laptop won't turn on when I push the power button

  Hello

  My laptop does not turn when I push the power button / stop and nor adjacent to the plug adapter lights turn on when I put the power supply. It behaves like completely dead. I pressed the button for 30 seconds as suggested in the following thread.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/my-laptop-won-t-turn-on-when-I-...

  My laptop is 2.5 years old and was working fine without any problems so far.

  Please suggest.

  Thank you

  Himanshu2303 wrote:

  OK... I learned to get the motherboard changed. How much it will cost in India for my laptop?

  What do you suggest I should do?

  How much will it cost in India?  I have no idea. I live in Europe.

  I suggest to ask a repair shop of PC or laptop.

  If the cost of repair is more than 50% of the current value of the laptop, you would be better sourcing of a notebook replacement.

• charge battery after installing the new battery does not exist

  I use Windows 7 Ultimate Spk1 32 bit on my laptop (big mistake)
  I recently installed a new battery & put it through the cycles of preparation 3 times following the instructions.
  The next time he went down to the alarm of low level newly together and I added the power adapter, nothing happened, the battery wouldn't charge.
  After many attempts to do nothing improved load, especially my temper.
  They advised me to install another battery which I just did, and this SECOND new battery just sits there & will not charge either.
  When he arrived he had 10% fresh rate showing so I removed the AC adapter and let him draw 8%, but when I replaced the adapter he had served on 8% & does not load.
  What is going on? How a simple thing like recharging simply disappears. ?
  Does anyone have a solution for this problem?

  See you soon
  Geoff

  The charging circuit inside the laptop and recharges the battery while the laptop is plugged into the mains. If the load circuit does not have the laptop is running on a charged battery or the power cable, but won't charge the battery.  The fact that the machine failed to load two new and old battery suggests the charging circuit has failed.

• Won't turn on after "relocation" on same HD Win7.

  Won't turn on after "relocation" on same HD Win7.

  Same HD (with existing work WIN7) has been used in new construction after that old MB crapped out. It wouldn't boot, so I re-installed Win7.
  It was the 2nd PC on a PC 3 family pack update version.
  The last time that I had a problem with the activation I actually had a phone number to talk to a real person, but now I keep running into dead ends... help! (25 days)

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Direct activation number: (888) 725-1047

  1-800-936-5700

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• Display does not decrease or turn off after the time specified in the power settings.

  Hello

  I have HP Pavilion dv6-2140's. It is 1.5 years old. For a few days, my computer doesnot dim laptop screen or stops itself when not in use. I did the settings or power options. tried both recommended hp and energy saving. waited for several minutes, but neither the screen became decrease or stop. It was plugged and I slept something, but I knew he would go to standby mode after 15 minutes, but when I woke in the morning, he was still on with its full brightness for nearly 6 hours! That's what really shocked me, and then I checked for everything on google, but couldn't find anything. So please help me. Why is it so. I didn't install anything, nothing updated.

  Thank you

  Please update the latest version of the BIOS for your laptop and also check if your laptop screen is turned off when the unit works only with the battery.
  Go to control Panel\All Control Panel Items\Power Options\Edit Plan Settings and configure the parameters of the battery and check if the display turns off. In case it does, you can try then configure the parameters of the plan when the unit is plugged.

• PROBOOK 4530 S: MY LAPTOP WON'T TURN ON

  my laptop won't turn on... I tried a hard reset and still its doesn't turn is not on... If I plug the power supply cable there is no sign of life whatsoever.the power light does not turn on either

  the fan does not turn on... it is not even a single sound or sign of life... I changed the batteries... I changed the charger/power supply but still nothing.i have tried to reinstall the memory and even changed the hard drive, but still nothing and I now suspect the motherboard

  Have you tried to connect the laptop to a power adapter and then gently shake the power adapter connection to see if the power led blinks on and outside?

  Who will let you know if the problem is the connector of the DC adapter on the motherboard. They are not lacking.

• I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and has already done.

  I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and that already.i want to uninstall the vista of old window on my laptop.and I try many times impossible to uninstall vista.please help me.Please,help advice.thank.

  You cannot uninstall a running operating system.  The best you can do is wipe the hard drive and start over, but which will also remove all programs and documents.

  "malayboy" wrote in the new message: * e-mail address is removed from the privacy... *

  I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and that already.i want to uninstall the vista of old window on my laptop.and I try many times impossible to uninstall vista.please help me.Please,help advice.thank.

• When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  Hello. Do you mean "Turn off" or "sleep"? Your iPad there cell phones, or is it only WiFi?

• Firefox does not take after the new update homepage

  After the new update of firefox, it resets my setting of the home page that I made
  Randomly, it loads a search engine called search.conduit.comof interfalls.

  How can I stop this!

  You can check in "Windows Control Panel > programs ' recently installed programs see if something of conduct appears.

  • Control Panel > programs > programs and features > uninstall or change a program
  • Click the installed column to sort by this column

  You can open the topic: config page through the address bar and to search for the prefs that refer to led and reset associated user defined prefs ("BOLD") through the context menu on the default value.

  • http://KB.mozillazine.org/about:config