Laptop won't wake up

My Pavilion dv2715, under Vista, will not wake up once he starts in mode 'sleep'. The lights are back, but the screen is not and won't be pulled off except computer push and hold the power button. Any suggestions?

My niece has the same problem with a HP Tablet.

Solved myself. Just flashed the BIOS, now works fine!

Tags: Notebooks

Similar Questions

  • laptop won't wake up from sleep mode

    laptop won't wake up from sleep mode

    Hello

    Here's the quickfix.

    Set the laptop to sleep instead of Hibernate. Portable computers may have problems with the Hibernate function. Here are the instructions to navigate:

    1. go in Classic view of Control Panel. (Ctrl + ESC, then type 'control' to quickly control panel access)

    2. double-click on the icon power options

    3. click on "change when the computer sleeps.

    4. click on "change power avancΘs."

    Go to the menu of sleep and

    value "Allow hybrid sleep": OFF

    * Set the parameter "Hibernate after": NEVER

    Note: You need to type the following in the field, what is not there drop down to select.

    This is most likely the issue and the resolution. However, here are a few other troubleshooting steps if you have any questions:

    Troubleshooting of the sleep mode function:

    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    Hope this helps,

    Steve <> Microsoft Partner

  • HP Pavilion 13-a113cl: computer HP Pavilion laptop won't wake up from his sleep by the keyboard or mouse

    I don't know if it is good advice to post this question in, but I'm having the same problem with two a113cl-13 laptops HP Pavilion running Windows 10 Pro (64-bit). The issue has to do with the awakening of the machines to sleep using the key on the keyboard or the mouse. I'm not having problems with them to wake up from sleep using the button of power or when I open or close them.

    I checked the BIOS and power settings are not there. (Version of BIOS F.32)

    I have checked boxes to allow devices to wake the computer in the management section of power without success.

    I changed the Intel MEI driver with 9.5 instead of 11 which is usually installed without success.

    I don't know if there is a problem with the BIOS and Windows 10 or something driver associated. Any suggestions would be greatly appreciated.

    Hello @jpk717,

    Thanks for the information!

    Since you have formatted the drive, you must be unable to return to the old operating system, unless you use recovery media.  You can find your product here recovery media:

    USB - Windows 8.1 Recovery Kit 64B

    You can try to use the recovery media to install the original operating system and see if the problem is resolved.  If you choose not to go down this path, you can try to re - install Windows 10, using the media creation tool.

    I hope this helps.

    Have a great weekend!

  • HP laptop (Vista Home Premium) won't wake up mode 'sleep'

    My HP Pavilion dv6910us laptop will follow the recommended power options and enter "sleep mode", as you want it or made-to-order... among the STARTUP options or by closing the lid.  However, once he is in "sleep" mode it won't wake up.  The LED on the power button flashes and the indicator on the chassis... but by pressing, open the lid or by touching the keys is useless... he wakes.

    To restart the laptop, I have to disconnect power, remove the battery and then connect the power/insert battery.  Needless to say, it causes Windows down and declare an unexpected shutdown during the power upward.  I did the research many resolutions... currently, my best solution is to change the power options so that when plugged the laptop doesn't go to sleep and then if I disconnect I have to shut it down... Rather, I don't have to go through this hassle all the time.

    I've followed many troubleshooting procedures... Updated BIOS update... Updated graphics driver... I even tried a "clean boot"... no additional services except for Windows services and has always had the same problem.

    Please... Help!

    This link solved my problem

    http://www.vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html?filter [11]

  • HP G62:. Hp G62, laptop won't turn on even after trying hard. Help

    My laptop won't turn. Home from work two days ago and I tried turning on but nothing works. I read through messages to hard test but failed. I don't hear any sounds on my laptop either. Can someone please help me understand what I need to do to get my laptop running. Thank you

    Thank you. . No light even after plug in the laptop. I've never seen a light on the power adapter even when he was working. Where is the light on the adapter? Please help I feel empty without my cell phone

  • Satellite L300-20 d - my laptop won't sleep mode

    My laptop won't go in stand mode, the power of battery or sector. I have set all the necessary settings in power options in Control Panel, installed the latest display driver and BIOS update, but no change, can anyone help?

    This changed after my software Driver Scanner a updated driver, and since then I could not go back.

    Thanks in advance,

    Alan.

    Hi Alan,

    > This changed after updated my software Driver Scanner, one driver, and since then I could not go back.
    That's why I put t use these scanners driver or install driver updates. The most recent version is not always the best thing and the most important: never touch a running system!

    Usually the windows system restore needs are enable by default if you are able to restore the system to an earlier point?

    What version of Windows is installed?

  • I stop my new laptop with Windows 7, install new updates. But now my laptop won't charge. There only dark blue screen. He won't even have to sign on the screen. Someone at - it happen?

    I stop my new laptop with Windows 7, install new updates.  But now my laptop won't charge.  There only dark blue screen.  He won't even have to sign on the screen.  Someone at - it happen?

    Hi ctgreen

    Welcome to the Microsoft Answers site!

    You can try the following and link methods under each method for more information on the same and see if one of them solve the problem.

    Method 1: Start the computer in last good known Configuration

     

    1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

    Click the button start , click the arrow next to the button lock , then click on restart.

    1. Do one of the following:

    ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

    ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.

    1. In the Advanced Boot Options screen, use the arrow keys to select last good known Configuration and press ENTER.
    2. If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.

    http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

    Method 2: Start your computer in Mode safe

     

    1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

    Click on the Start button , click the arrow next to the lock button , and then click restart.

    2. do one of the following:

    o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

    o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode and press F8.

    3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

    4 log your computer with a user account with administrator rights.

    When your computer is in safe mode, you'll see the words Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    If you are able to access the desktop in SafeMode I suggest you read the article in the link below for instructions on restoring the system.

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    Concerning

    Varun j: MICROSOFT SUPPORT

    Visit our Microsoft answers feedback Forum

    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

  • laptop won't start windows xp up.error win32k.sys?

    My laptop won't boot windows xp, to ask if I want to start windows normally or with guests orders or network in safe mode. According to what I try nothing works. It says: an error has occurred with win32k.sys. What is - this and how to fix it?

    Claire

    As you probably know Evesham closed to the public in 2008.

    I think that your computer is a portable computer. I can't access a free copy of the manual, but I imagine that you have a copy of the operating system on the hard drive in a recovery partition. Am I wrong?

    Before attempting to repair your computer, you will need to back up your data files on removable media. If the computer does not start, you need access to a second computer at home. Do you have a? If Yes is it a desktop or a laptop?

    I would also ask if you comfortable using a screwdriver to remove the hard drive of your laptop Evesham, put it on an external support which can be purchased via Amazon and its connection to a USB port on the second computer. These are not difficult tasks, but not everyone wants to take on this task. If not comfortable take your laptop to a local computer repair shop.

    As for the repair of your laptop once you have recovered your data files, restore the operating system to factory settings using the copy of Windows XP, which I think is more than likely in a recovery partition. It will be activated by single key, perhaps the F10 or F11 key or you can have an option in the menu that appears when you press the F8 key during the boot process. It also seems that Evesham commonly supplied recovery discs.

    If a factory restore does not work I would then test the memory.

  • HP-G62226TU: my laptop won't turn on when I push the power button

    Hello

    My laptop does not turn when I push the power button / stop and nor adjacent to the plug adapter lights turn on when I put the power supply. It behaves like completely dead. I pressed the button for 30 seconds as suggested in the following thread.

    http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/my-laptop-won-t-turn-on-when-I-...

    My laptop is 2.5 years old and was working fine without any problems so far.

    Please suggest.

    Thank you

    Himanshu2303 wrote:

    OK... I learned to get the motherboard changed. How much it will cost in India for my laptop?

    What do you suggest I should do?

    How much will it cost in India?  I have no idea. I live in Europe.

    I suggest to ask a repair shop of PC or laptop.

    If the cost of repair is more than 50% of the current value of the laptop, you would be better sourcing of a notebook replacement.

  • HP dv9000 vista laptop won't start. Cannot 'fix '; BIOS Diagnostics: all GOOD except Hard Drive check result: replace the hard drive NEED the data from this hard drive!

    HP dv9000 vista laptop won't start. Attempt to restore repair result several times cannot be made online. BIOS ran diagnostics, everything was good except the hard disk, hd chk result: replace the hard drive. F11 entered to access advanced hp Recovery Manager options tempted towards the top of the entire disk, all files show while listing to back up, attached to my external hard drive current over the back with success.  Plugged external on another laptop, new files since the previous backup are no where.  Should I buy a new external hard drive and repeat the backup via Recovery Manager Advanced Options or should I remove the internal hard disk and insert it into a case and apply in usb on another laptop to view the files.  I know when my computer crashed, I had too many windows/tabs open and too much process and tried to interrupt a process and I confused his little brain and now he has Alzheimer's disease.  I am freaked because I'll lose everything 2012 including some very important documents and about 50 000 pictures HD (yes I learned my lesson backup!) I am in crisis mode because I recently became sick and my photos and documents is vital for my next year of chemotherapy and radiation. Please advice are extremely appreciated. Thank you

    Hello

    This backup after pressing F11 is a HP backup option, not a Microsoft option.

    I suggest that you contact HP or ask their Support Forums.

    http://h30434.www3.HP.com/

    It's the normal advice I'd give to record data; but we have no idea of the State of your hard drive.

    Saving your files:

    You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

    Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

    http://Knoppix.NET/

    See you soon.

  • PROBOOK 4530 S: MY LAPTOP WON'T TURN ON

    my laptop won't turn on... I tried a hard reset and still its doesn't turn is not on... If I plug the power supply cable there is no sign of life whatsoever.the power light does not turn on either

    the fan does not turn on... it is not even a single sound or sign of life... I changed the batteries... I changed the charger/power supply but still nothing.i have tried to reinstall the memory and even changed the hard drive, but still nothing and I now suspect the motherboard

    Have you tried to connect the laptop to a power adapter and then gently shake the power adapter connection to see if the power led blinks on and outside?

    Who will let you know if the problem is the connector of the DC adapter on the motherboard. They are not lacking.

  • Split HP 13 x 2: laptop won't start


    Hello @migo10,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

    I read your post on the laptop won't start does not and wanted to help you!

    For starters, can you provide me with the product number of the laptop?  Here is a link, you can use that will help you find your model and product number: How can I find my model number or product number?

    In the meantime, please consult the following document and let me know how it goes:

    Computers laptops HP - computer won't start (Windows 8)

    Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

    Have a great day!

  • HP G62 Notebook Pc: MY COMPUTER LAPTOP WON, T START

    my laptop won, t start when I press the button nothing! It doesn, t start

    Tell me please help me

    With most HP laptops the first thing that do is to unplug power removed battery and push and hold the power button for 15 to 30 seconds to reset the machine.

    After you have done that reset for the power back in and try again, sometimes get you lucky.

  • my computer HP G62 laptop won't let me connect to this subject says not found user profile can help you

    my computer HP G62 laptop won't let me connect to this subject says not found user profile can help you

    Hello

    You can try the following.

    Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

    Another option if the above does not help is as follows.

    Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

    Kind regards

    DP - K

  • The taskbar on my laptop won't 'hide' when this option is selected.

    * Original title: taskbar

    The taskbar on my laptop won't 'hide' when this option is selected. How to fix?

    Lock the taskbar does not influence the ability to auto-hide.  Lock, it's what locks 'task bands' position (toolbars task bar as the key on the keyboard or custom-added toolbars).  He does not hide it at all.

    If the taskbar are not hidden, this means that an application is currently the NeedyState flag and asking to be seen.  Until dismiss you the application of enforcement in need, the taskbar will continue to show.

Maybe you are looking for

  • Portege R600 - exchange of HARD drive

    We are very impressed by our new R600-S4201, among the first to be released in the American market. But we would like to exchange an SSD for the 160 GB conventional hard drive. CSR Toshiba says that we can do it - that it will not void the warranty -

  • Restoration of the accessors of class through properties

    LV2013 When you create an accessor for a class data member, you have the possibility to make this available through nodes in property accessor class. I accidentally deleted a VI of the accessor. The VI himself is still; It's pretty easy to ADD the fi

  • No port USB001 virtual in the drop-down list of printer ports

    I started this question in Twitter, but due to character limited in Twitter, I decided to bring the issue to this forum. How can I add a USB port to the list so that I can connect a USB printer. I tried to follow a suggestion by a Microsoft support e

  • How to get rid of more of 600 emails all at once

    I have answarded on my I phone (ALL) these emails but not here on this show, which gave me 600 emails more > I want to rid all at once to clear my mailbox... now!

  • Delete duplicate of PL/SQL command result values

    Hi allI am working on SQL Developer 4.1 and using sub PL/SQL command to retrieve the unique values of Batch_No with matching data:Row_ SELECT TO_NUMBER (ROW_NUMBER () (IN Batch_No ORDER)),Batch_No,Record_Source,Create_Date,SubmitterOf(SELECT DISTINCT