Laptops Dell Studio 1555 network adapter in Vista problem

I work with Dell Studio 1555 laptop computers that have Windows Vista Home Premium on them.  I had to reinstall Vista and drivers.  Now that it's all over I can't the laptop to connect to wireless internet.  I get the below error message:

This computer does not have an installed and configured wireless network adapter...

what Miss me?  some services to market?

any suggestions would be greatly appreciated?

Thank you!

http://support.Dell.com/support/downloads/index.aspx

Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Laptop Dell Studio 1555 w / Vista does not wake from sleep when the lid is open.

    I have a laptop Dell Studio 1555 with Vista Premium 64-bit. Until last night, the laptop would run mode standby when I closed the lid and woke up when I opened the cover later. Yesterday I was downloading photos from a Canon camera via USB. I close the lid when I did. When I went to open the cover later the laptop screen remained in black and white. The power button is lit, but the only way I can get to meet is to hold the power button until it turns off completely, and then restart the laptop. A difference when the lid is closed, I think the power button will blink and turn off slowly while he was really in sleep. He remains on all the time now when the lid is closed. I tried to go into power management and put the laptop from sliding when the lid is closed, but has not made a difference.

    Run the system restore and choose a restore point created just before the problem occurred. Steve Winograd, MS - MVP (Windows desktop experience)

  • Laptop Dell Studio 1555, closing without notice

    I bought my laptop Dell 1555 about 14 months ago, and about 3 months ago I started having this problem. The laptop shuts down randomly without warning, as the power cable has been removed or something. It never happened, when the computer is idle, it occurs when you are using Java applications, and more recently when playing games, for example counter-strike: Source. I was told that this problem was due to overheating, so I tried to clean any dust which may be included in the section fan with a can of air spray a couple of times, but still the laptop stops randomly. I installed the latest version of the BIOS, but that has no effect. Does anyone know a fix? My warranty has run out, so I want to try and hold and to send it to Dell if possible. Any help is appreciated.

    OK I WAS WRONG, this random shutdown problem was due to the video probe going off...

    So in my previous post, I was talking about how everything worked fine when I was on the battery, but it turns off randomly at the time wherever I have to plug my power adapter... Well, it's the reason why...

    When you plug in the AC adapter, change power settings, so to change this--> click the battery icon, and then click "power options more"--> here, you have your power plans--> click on "Change Plan settings" for plan whatever you use now-->, and then click "Change advanced settings for power"--> Ok so here U will see a lot of positions under click on each of them , can do all the "connected:" equal settings to "battery on:" parameters (it worked for me) If you experience closing problem even when you are on battery, try turning down all these options, you MUST TURN IN all areas related to your Card(The name tags are pretty self-explanatory,You'll understand when you have a look at them) chart... Leave things alone CPU, unless this still does not work after that you turn down the graphics part...

    So, why do all this? Well you grant effectively down the performance of your laptop in turn = less processing is done in a time = which means less heat is produced portable = want to extinguish sometimes clumsy :) (that is to say in the middle of a presentation, at the same time where you were going to present this VERY important assignment or when you wrote just code 500 lines long on Matlab and everything crashes, and all files associated with it gets corrupted etc... either incidentally, all of these things did happen)... And why what happens beginning all after 2 years of beat (in my case, might be early for some of you out there) well thermal glue on your graphics card fades with time, so it is not eliminate heat from the GPU as it used of... for this purpose your GPU will still work at very high temperatures around 101 c, in my case, when he does absolutely nothing! [I discovered this when I ran Dell Diagnostics... [If you're interested, check it out, he made a very thorough control, and allows you to pin point hardware part is faulty]... so, how is this related to the power adapter, well, if you check in the power setting, as I already said, when you plug in the AC adapter, the laptop switches from the GPU, Powersave mode to--> GPU maximize performance mode , so slow temperature Monte, then when you start using your laptop, like move your mouse or by opening a web browser, a little bit of your GPU will be used, which might make it a little warmer and passing the max temperature, actually trigger the security mechanism which turns off your computer...

    This method may not work for you, if the thermal glue has completely disappeared... In this case, you may need to change... Just to make sure that, glue/heatsink / fan blocked is the real problem, run the Dell Diagnostics make the "long version", it takes a while, but it checks everything.

    So drop my laptop performance helped me? YES, 100%... I can't play games on my laptop, but I can still surf the net, play music, watch movies and use office + some of my programs of Engineering (Matlab, etc)... This should get another 8-10 months, "Hopefully, fingers crossed :))"

    While this said about DELL laptops! They SUCK BIG TIME! I may BE a FAN 2 years ago BUT NOT NOW!... People, spend a little more money and BUY APPLE!, I have a few friends who have been with them for over 3 years and they don't SLOW DOWN, MORE than HEAT or to randomly turn OFF! ... So if you want your phone to last at least 3-4 years go APPLE! (Mac Book Pro)... I hated he was surfing systems with low card, 2 years ago but now its seems they is not that expensive, as well as all specifications are really good... for $2000, you can get a good model, compared to a dell for $1500, you pay $500 extra, quality and peace of mind :)...

  • Can not install software Bluetooth Dell Windows 7 64 bit in the Dell Studio 1555

    Hi you

    When I want to install the bluetooth driver laptop Dell Studio 1555 with windows 7 64 bit partly Active switch Bluetooth wireless to help I click F2 to activate bluetooth & wireless, but it does not work.

    mobility of Windows, I'm running Center wireless on & off but still poblem will solve

    I downloaded driver from the site Web of dell and match with my laptop

    Please help me.

    TNX

    Hello

    1. what happens when you try to connect to the Bluetooth?

    2. What is the exact error code / message?

    3. were you able to connect via Bluetooth before the show?

    4. What were the recent changes of hardware or software that are performed on the computer before the question?

    Please follow the links below to solve the problem.

    You may need to make your computer discoverable to Bluetooth devices, or configure Windows to notify you when a new device is trying to connect to your computer. To do this, you need to control how your computer pairs with (connects to) Bluetooth devices.

    Method 1


    To control how your computer pairs with Bluetooth devices

    (a) open the control panel by clicking the Start button, then Control Panel.

    (b) in the control panel search box, type Bluetooth, and then click Change Bluetooth settings.

    (c) in the Bluetooth settings dialog box, click the Options tab and do one of the following:

    To make your computer discoverable to Bluetooth devices, select the check box for allow Bluetooth devices to find this computer.

    When a computer active Bluetooth device is in discoverable mode, it broadcasts a wireless signal that allows it to be detected by other Bluetooth compatible computers or devices. This is sometimes called pairing mode.

    Add a Bluetooth device or other wireless or network device: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

    Method 2


    If the previous step fails then check and make sure that the Bluetooth function is running on the computer

    (a) click Start reducing this image enlarge this image, type services.msc in the search box and press enter

    (b) right click on the Bluetooth support service, and then click Properties.

    Make sure that the service status is set to start and service type is set to automatic.

    For more information,.

    Latest version of the driver for Studio 15 (1555( )

    Expand all and search under network Wireless 370 Bluetooth minicards (6.2.0.9600, A01)


    http://www.Dell.com/support/drivers/us/en/19/product/Studio-15

    The problems with Bluetooth devices

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

    (Applies to Windows 7)

    I hope this helps.

  • My dell studio 1555 laptop does not turn on

    Hello

    Does not turn my dell studio 1555 laptop computer. I tried all the troubleshooting option provided in the dell forums.

    Here are the steps:

    • Disconnected all external devices on the computer, including the battery and the AC adapter / CC.
    • Press and hold the power button for 20 seconds.
    • Reconnected the battery and the adapter.

    After checking all the options of this still my laptop does not turn. I am not able by any beeps as well.

    I even checked the video output connect my laptop with an HDMI cable on other devices (TV). The screen is blank.

    Kindly let me know what we can do more.

    PS: I have no warranty for my laptop.

    Thank you

    Kirti.

    Check that the LED on the adapter lights before plugging the end of the book.  If this is not the case, replace the card.

    Try without the battery - if it will then light up, the battery is bad.

    Unplug, remove the battery, press power for 30 seconds and remove and reinstall the bars of memory.  Try again.

    If it lights with a good map and without the battery, replace the motherboard.

  • No internet access available or detected Dell Studio 1555

    I was given a Dell Studio 1555 and finally had time to reload a new installation of the OS from the disk of the factory. When I went to access the internet for updates, etc. the ethernet port was not working. There is no Wi - Fi available, but I guess that there is a wireless laptop card. The Device Manager has several listed questions:

    Standard VGA Graphics Adapter (says this device cannot start. Code 10)

    Base system device (the drivers for this device are not installed. Code 28)

    Base system device (the drivers for this device are not installed. Code 28)

    Base system device (the drivers for this device are not installed. Code 28)

    Ethernet controller (the drivers for this device are not installed. Code 28)

    Network controller (the drivers for this device are not installed. Code 28)

    SM Bus controller (the drivers for this device are not installed. Code 28)

    Normally I fix my own PC problems but require internet access on the computer to correct LOL so I'm screwed up right now. I am in grad school and would like to have this work when school starts again after the holidays. Any help is appreciated. I'll give you any other information I can if you need. Thanks in advance.

    pcnovice78,

    Did you install The Dell software system utility and drivers Intel PM45 Express Chipset Family, GM45 Express Chipset Family, PM55 Express Chipset Family, Chipset, HM57 Express Chipset Family, v.9.1.1.1015, A01 Cantiga first? The combination of these two drivers know what is connected to your system.

    Then try the drivers again.

    Rick

  • Dell Studio 1555 does not connect to internet

    I have a Dell Studio 1555 with windows vista, I recently did a clean install on him, that he had several errors saying THAT BOOTMGR was missing, which was apparently defeated and is therefore no longer and issue, however, I am currently trying to install CD player and more to install correctly, except for a few wireless readers. From that it does connect to the moderm via radio, not it connect to internet via ethernet cables. It's also extremely and unusually slow, with errors continious for several areas. I don't know what to do and am only slightly tech savy. Please help as I need this laptop facing up and running as soon as possible. Thanks in advance for your time.

    Rebecca :),

    After you install the operating system, have you installed the chipset drivers and the utility of the portable system? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

    Start with the utility of the portable system and the chipset drivers and install from there.

    Alternatively, you can try to restore your Computer´s factory settings software

    Rick

  • WINDOWS DOES NOT START DELL STUDIO 1555

    MY DELL STUDIO 1555 UNBOOTABLE - PERIOD. WHERE CAN I GET A DELL RESOURCE CD BACKUP GAME, OR A COPY OF WINDOWS XP GETTING STARTED DISC? Help! WINDOWS VISTA HOME PREMIUM EDITION IS THE ORIGINAL ON THIS LAPTOP, BUT I WANT TO SWITCH/DOWNLOAD/INSTALL WINDOWS XP AND WINDOWS 7 OR 8.1

    Hello

    Thank you for your response.

    Please update the status of the result, we will be happy to help you.

  • Dell Studio 1737 running the Windows Vista operating system. Hard drive errors

    My laptop Dell Studio 1737 running windows vista reports error code 2000-0146 since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?

    My laptop Dell Studio 1737 running windows vista reports 2000-0146 error code since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?

    Hello

    This Dell 2000-0146 error code is for a failed hard drive / failed.

    You will need to replace and reinstall the operating system.

    Save your data as soon as POSSIBLE.

    See you soon.

  • Motherboard of Dell Studio 1555

    My computer motherboard dell studio 1555 laptop went

    So is it possible for me to upgrade my processor i3 and the card mother correspondent

    If there is no possibility for upgradation let me know the details?

    Thanks in advance

    Reliable source

    www.Parts-People.com/index.php

    If you switch from ATI, Intel video or vice versa, you will need a new heat sink.

  • QUICK FACIAL RECOGNITION ACCESS WILL NOT WORK ON DELL STUDIO 1555 FROM MOZILLA UPDATE

    When Firefox updated my face recognition fast access on Dell Studio 1555 is no longer works. The box shows but not green line around it

    There are other things that need your attention.

    Your list of details of the system shows that you have two Flash plugins installed.

    1. Shockwave Flash 11.6 r602
    2. Shockwave Flash 11.2 r202

    You must remove the older version of Flash 11.2 r202.

    You can set the pref plugin.expose_full_path to true on the on: page config to see the full path on the plugins installed on the topic: plugins page.

    It is best to not only let pref set true as it exposes the full path to the web servers through the navigator.plugins object, so reset this pref to false after you're done with the topic: plugins page.

    Manually, see "uninstall a plugin:

    Note that this will remove all players Flash (for IE as well).

  • Where can I access the webcam integrated on my laptop Dell Studio 1500?

    Where can I find the webcam on my laptop Dell Studio 1500?

    Thank you.

    You must have a webcam icon in the notification bar, double click on it then click on center of Webcam.

    If you do not see the icon click Start, all programs, Dell Webcam Dell Webcam Center.

  • the integrated for dell studio 1555 webcam driver

    I have upgraded to Windows 8 last year and it worked fine until Jan 16th when my webcam driver has been updated, now, all I get is a black screen.  Have tried other options of driver of creative technologies without success.  I would like to know what should be the appropriate driver.

    I'm having the same problem here.

    Dell Studio 1555 and after the update to Windows 8.1 the webcam doesn't show any video. Just a black screen.
    Any progress?
  • Dell Studio 1555 power button cable

    I have a Dell Studio 1555 that the right side of the lcd bezel jumped on and 3 wires to the switch, everything broke loose.  I have no idea what should be the order of seizure on the map of power switch.  I can identify position 1 because it is marked on the map.  Any help with setting up for blue, white and green wires would be greatly appreciated.  Thank you!

    I have a Dell Studio 1555, old enough, at this point, but he's dead (i.e. the powerbutton was disconnected) suddenly and I would get my files there.  I did a little research, but it seems that for the model of 1555, the powerbutton and wifi are not grouped, see

    ADMIN NOTE: broken link has been removed from this post by Dell >

    Any other ideas?  I like the idea of c‰blage, seems to need to at least weld, is it possible to change some other button to be the powerbutton?

    Thank you!

  • Dell Studio 1555 lack numpad - is there a practical solution?

    I regularly use accented letters in formal and informal contexts in several languages and I need a numeric keypad for typing these. I bought the Dell Studio 1555 without realizing account as the keyboard completely lacking a numeric keypad integrated. I can't switch back between, say, Spanish and German keyboards standard because I use the Dvorak layout and feel that force me to change the layout I use natively just for a missing feature on a keyboard is not a real solution to the problem.

    Is it possible to assign keys fn key to, say, the top row? No combination of Fn, shift, NumLock (reassigned to F6) allows me to type alt codes.

    cungsyu

    Well, I'm not against having a hardware keypad, but I would like to find a software solution mainly.

    http://msdn.Microsoft.com/en-us/goglobal/bb964665

Maybe you are looking for

  • Panarama A6000

    Anyone know how to adjust the Auto ISO in scan panarama mode.

  • Incomplete downloads, now we cannot start the computer on the rise

    Laptop my daughter (under Vista) have not completely downloaded updates.  Now, we get the screen "windows did not shut down correctly ' when turned on.  However, no matter what option is selected, we get just a black screen.  We no longer have any of

  • Could not complete installation / 'does not support this printer. "

    The product name and no.: Officejet 6500 e709n Operating system Mac OS x Version 10.4.11 Error message:-50 No change I installed this printer in 11/10, but the lost with computer connection, so I reinstall the computer using the same drive, but the i

  • What version of Cisco IP Communicator supports to UC520?

    Model: UC520 IOS version: 12.4 (20) T4 CME: 7.0 What version of Cisco IP Communicator supports to UC520 with CME7.0? Release Notes of IP Communicator is not included CME7.0 in the supported versions. http://www.Cisco.com/en/us/products/SW/voicesw/ps5

  • Cursors disappear in Camera RAW

    Sometimes when you adjust a raw file in ACR my cursors disappear and gray outside.  I then click off ACR on another program or desktop and click back to make it work again.My system features Mac Pro (end of 2013 6,1), 3.7 GHz Quad - Core Intel Xeon,