Laser color CP1025nw spray: printer does not print

The LaserJet CP1025nw color does not print when I click on 'print '.  The green light is, as if the printer is ready to print.  Ordinary laser printing paper is properly loaded in the tray.  The black toner is 70% and the three colors are all<10%.  i="" have="" set="" the="" printer="" to="">

When I click on 'Print' there are no sounds of the printer, however, the green light remains on constantly.  It does not, Flash as it does when you're printing.

This printer can print grayscale with empty color cartridges?  I am trying to print a b & w text.  If so, what should I do?

Thanks for any idea that you can provide.

JBC2

Hi @JBC2,

I see that you have problems printing and want to know if you can print grayscale if the colour toners are exhausted. I'd love to help you.

If any toners and are completely exhausted, the printer will not continue to print until they were replaced.

Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

HP LaserJet Pro CP1025 and printers color CP1025nw - printing a Configuration Page.

I have provided a few steps if the problem is software partner.

Fix permissions of the drive on the Mac:

Close all applications.

In the Apple menu, click OK, click Applications, and then click utilities.

Double-click disk utility.

Highlight your hard drive / partition on the left.

Click on check and then repair disk permissions.

Restart the computer...

Reset the printing system:

Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

Click on the Apple icon and then click on System Preferences.

Click Print & Scan.

Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

Click OK to confirm the reset.

Type the name and the correct password.

Click OK to reset the printing system.

Then click on the sign to add the driver, highlight the printer +.  Then click the Add button.

How is the printer connected? (USB, Ethernet, WiFi)

If you appreciate my efforts, please click on the button below the thumbs up.

If there is anything else I can help you, let me know. Thank you.

Tags: HP Printers

Similar Questions

  • F4180 do not print in color (even if it does not print in color test page)

    Whenever I try to print anything from a Web page or save the file, it only prints in black and white. I did the color test page (holding the button cancel and hit then start color copy), and the colors printed correctly.

    I always see color/black and white of preferences and make sure the color is selected. It continues to print only in black and white so.

    Welcome to the Forums of HP redwing634,

    I read your message which indicates that the printer does not print in color from the computer, but it will print the color on the material test page. I can help you with this.

    Try the following steps to see if it will solve the problem.

    More troubleshooting when the self-test Page has no flaws.

    Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically.

    Find and fix common printer problems using the HP for Windows diagnostic tools?

    Try printing the paint to see if you have the same results. How to use Microsoft Paint.

    If you are still not able to print in color, the pilot may have been damaged. I uninstall and reinstall the printer software.

    Uninstalling the printer software.

    HP Deskjet F4180 all-in-One Printer Drivers.

    Select your operating system, click Next and click on the software to download and install.

    What operating system do you use? How to find the Windows Edition and the Version on your computer.

    How is the printer connected? (USB, Ethernet, WiFi)

    If you need help, let me know.

    Have a wonderful day!
    Thank you.

  • HP color laser jet cm1312 mfp sharing does not work

    Hello, I have a problem.
    The this printer to connect to the server (windows 7 32 bit, latest driver).
    Other users (network) may not print, but after restart server, everything works...
    What is my problem? Help, please.

    Hello

    To understand the issue correctly, try the following:

    1. If all the shared PC are not able to print, check if you are able to print from the server PC.

    If print server as PC still work, there will be some communication issue betn the server and the other computer on the network.

    2. If printing from computer Sever also does not work unless you restart the server PC, it might be a problem with the spooler on the server or the printer driver. You can try to reinstall the printer driver and the reshare to PC network and check.

    3. this question could also arise from the printer itself. Tray to update the Firmware of the printer to the latest version and check.

    4. If the driver on the server is offline, try now to turn off the SNMP state:

    From the Windows desktop, select Start, settings, and then click Printers. The icon of the pilot series HP LaserJet XXX, right-click and select the Ports tab, check if the correct network (IP address of the printer) port is enabled in the list of ports, click on the button Configure the Port, in the Port Settings window, uncheck the box next to the option "SNMP status enabled" (disable), click OK to save the settings , click on apply and then click OK to exit the properties of the driver.

    See you soon,.

    Manjit

  • Wireless Laser Mouse 6000 v2.0 does not connect to the Wireless Desktop 3 receiver. 0a

    Hello

    I'm having a problem, try to use a Wireless Laser Mouse 6000 v2.0 with a wireless desktop receiver 3. 0a. My previous mouse, wireless laser Mouse 5000 connects fine but the left click button is inadmissible about half the time so I bought the Wireless Laser Mouse 6000 v2.0 to replace. Laser mouse 6000 v2.0 works fine on my laptop with the usb receiver that comes with it, but I would like to use this mouse if you use my office receiving office 3. 0a that connects my microsoft comfort keyboard 1027 and all other previous microsoft mouse that I have owned. I downloaded and installed the latest drivers point software and smart and still it does not detect or connect the mouse 6000 v2.0.

    I tried to use the usb receiver supplied with this mouse on my desk but he won't my keyboard (comfort 1027), but the mouse works fine when using the usb receiver. Any suggestions to get this mouse works with my receiver older are greatly appreciated! Thank you

    Hi Mburton8899,

    It must have the same version of the receiver in order to work properly. Unless the mouse is bluetooth, it can only pair with the USB dongle, with which he came.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • the color chart "load" command does not in InDesign 2014 and 2015

    The "load the color chart" command in the Panel color chart does not in InDesign 2014 and 2015. Cannot click the Pantone or any other collection, they are all faded.  I have already trashed the Preferences folder and restarted ID and Mac. It started only once I have updated to the latest version of CC, but now it affects 2014 and 2015.  Don't know what to do, I don't like reinstalling one or the other.  Tried to go back to the CS6.  All solutions anyone?  Thank you!

    Screenshot 2015-07-20 13.14.21.png

    Color chart of load control is for loading samples from other documents or a swatch file.

    Use the new swatch command to add a color.

  • Sampling of colors with the eyedropper does not work.

    In Lightroom CC, I create a graduated filter. I want to give it a color, if I click in the gray box, which shows the colorpicker. I understand that you can pitch a color of the picture by clicking the box with the colors, then hold and go to the photo and release the mouse button, LR will choose this color. This does not work with me. If I click on the mouse button and let the color box, the slider in the color box drops to zero saturation and does not move with the colors of my photo I'm going with my pipette. It does not pick up the color.

    Same problem here! Selector is not looking for colors on the image window (it does outside of the Lightroom window!)

    I found that the problem occurs when the preferences are set to use the graphics processor.

    Disable the GPU and the color eyedropper tool returns to work on the image window.

  • Color submenu Spry hover does not work

    Hello
    I did spry vertical menubar, (I had several on my page, because I want to manage the colors on all of them). so for now, I'm working on the first (if I can do the first I do the other).
    My problem is the submenu have color when I go on the parent of the menu, but when I go into the submenu of the color to significate that the link is active do not work, I try many a trick (found in forum) but does not work.
    So if someone had an idea for help, please? I think that I don't have the proper syntax for the action of pointing on the submenu (sorry for English)
    Kind regards

    OK, sorry, I m quite starting on spry
    I don't have enough, research I find the solution... http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=12&catid=189&threadid = 1264732 & highlight_key = y & keyword1 = spry % 20submenu

  • color of the table does not reset

    My table (TABLE of SUM AVG) is supposed to show entries below zero in red. He has a little problem. The first time that it works, but the second time that the color of the text will not return to black when I run again.

    He remembers the entries that were red on front. Based on my wiring below, the second time I run it, it must set the background color to the light yellow and black text, then make loops for.

    BTW, I also used a sequence flat to force this order, but that did not help.

    Hi murchak,

    What can be seen in your picture you

    -only value a "yellow light" cell background: ActiveCell = (2, 2)

    -and then you assign the first 3 lines "light green" background

    -then you set some cells, according to their value to red. (Btw. There is a special ' ")<0" function="" in="" the="" comparison="">

    There is no place where set you a black background for all cells.

    Maybe you should try ActiveCell (-2; -2) instead?

  • HP Color Laserjet 3600n: door does not close

    There seems to be something in the way that prevents the door from closing completely.  I switched all cartridges and transfer belt.  It seems there have broken anything inside.  Because the door does not close, it won't initialize.

    Any ideas?

    Thank you for your ideas, but he wasn't a cartridge problem.

    I hired an eyes of co-workers and she found a white tab in the upper left corner that hung down unlike our other 3600 s.  When he was pushed upward, all broken in the door completely closed.

  • pro__intellitype IntelliType Pro does more (error msg) - 64 bit Vista Home. Just installed Microsoft keyboard/mouswe set, laser 6000 - intellitype pro still does not.

    IntelliType pro
    IntelliType pro

    Hi Grosher,

    Welcome to the Microsoft Answers site!

    1. from when are you facing this problem?

    2. is the keyboard and the mouse does not?

    Try the following methods.

    Method 1

    Resynchronize your device with the receiver

    1. Press the button on the receiver and check that the light on the receiver starts flashing.
    2. If a dialog box appears on the screen in seconds, follow the instructions that appear on the screen. Otherwise, continue to the next step.
    3. Press and release the Connect Channel button on the bottom of the mouse or the keyboard.
    4. Check the green light on the receiver. A continuous green light means that the synchronization was successful. If the problem persists, repeat steps 1 to 4.
    5. For the Wireless Notebook Mouse: this issue can occur if the micro-switch on the bottom of the mouse is not released. Use a PIN or pen to try to release the button, if it is pressed.

    Method 2

    un) try different ports

    To determine if the problem is related to the ports on the computer, use only the two cables provided with the wireless desktop receiver or the cable that is provided with a mouse.

    b) USB keyboard and USB mouse

    If the USB cable is connected to a USB hub, disconnect the device from the hub, and then plug it into a USB port on the computer. If your device is already connected to a USB port on the computer, try to connect the device to a different USB port if available.

    c) try the keyboard and the mouse on another computer

    d) change the batteries

    e) to recharge the batteries

     

    Method 3

    Reinsert the batteries or install fresh batteries

    Both the wireless keyboard and the wireless mouse rely on AA alkaline batteries for power. Remove the batteries and then insert them again. If the problem persists, install a new set of batteries in the unit that you have problems with.

    Method 4

    Install the latest version of the software

    If you are troubleshooting a wireless mouse, download and install the latest version of the Microsoft IntelliPoint software. For more information about IntelliPoint software, see the Microsoft Web site at the following address:

    http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=trackball&name=t_to15&OS=WVista_32&lang=en (http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=Trackball&name=t_to15&os=WVista_32&lang=en)

    If you are troubleshooting a wireless keyboard, download and install the latest version of the Microsoft IntelliType software. For more information about IntelliType software, visit the Microsoft Web site at the following address:

    http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=MK&type=trackball&name=t_to15&OS=WVista_32&lang=en

    Method 5

    Manually reinstalling drivers

    To remove and reinstall the drivers, follow these steps:

    1. Disconnect the device from the computer.
    2. Cut the power to the device, if the device has a separate power supply.
    3. Open the Device Manager. To do this, use one of the following methods:
      • In Windows Vista, click on start toreduce this includes this image, type device in the Search box, and then click Device Manager in the programs list. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
      • In Windows XP, click Start, click run, type devmgmt.mscand then click OK.
    4. Double-click keyboard, right-click on the keyboard you are using, and then click Uninstall.

      Note If your device is not listed, this means that the device has been deleted automatically when you disconnected the device. Go to the next step.

    5. Restart the computer.
    6. Once again the power supply, if you have to and then connect the device to the computer. Your computer detects the device and then reinstall the drivers for the device.

    For more information on these methods, you can go through the items listed below

    The Microsoft wireless keyboard or mouse does not work as expected or respond intermittently
    http://support.Microsoft.com/kb/838398

    Microsoft USB wired keyboard is not responding or the types of wrong characters
    http://support.Microsoft.com/kb/258826

    After several weeks of typical use, a Microsoft wireless device may stop responding
    http://support.Microsoft.com/kb/322609

    Hope this has been helpful,

    Kind regards
    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Fill color of the rectangle does not?

    I have a document where I'm trying to draw a simple rectangle with a fill color using the Rectangle tool. All of a sudden the fill color will not be displayed. I can't understand why he did this. I tried to create a new layer for the rectange but it will not always filled correctly. It is not hidden behind whatever it is, it is already 'arranged in front."  I enclose a screencap in order to explain my problem.

    As you can see from the pictures, I tried trawing a teal rectangle, but only half of it is met (note the blue frame, showing that half left of the color of the rectangle is not displayed).

    Someone at - he encountered this before? Help! I use CS4.

    Picture 3.png

    Picture 2.png

    The effects panel says there is a kind of effect applied. Maybe that's the problem...

  • Printer Laser HP LaserJet 5200n series does not print the halftone

    Hello

    I have a HP printers laserjet 5200tn running on Windows 7 (32 bit) and I'm unable to print the midtones in the form of judgment that I need.

    It is default to 133/150 lpi. I don't c get the options I need to be able to change this for Photopolymer plates positive 65-85lpi and screen print 40-50lpi Letterpress.

    I currently have self-test provided HP Universal driver, but I think that's not the right one.

    Does anyone know the pilot preferred to the output of what I need.

    Thank you

    Gilbert

    Hello

    1. don't you make changes on the computer before the show?
    2. you receive an error message?

    Method 1:
    You can try to download the drivers from the manufacturer's Web site and check >

    http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1137938&lang=en&cc=us&prodTypeId=18972&prodSeriesId=1137934&TaskID=135

    Check out the link to update the driver for Windows 7.

    Method 2:
    Try the steps in the link and check if you are able to print
    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Check out the link:
    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  • Laser Jet 4500N disconnection and does not print

    I got a cable (mini centronics USB) to connect the printer to my mac OS x 10.9.5 via USB. This is my first time the printer connected.  I recognized the printer and installed. He has not been able to print an entire page.  When I select printer and print it Say "Sending data to Printer".  The window will then say "the printer is not connected.  Then I can unplug the usb on the printer and plug it in again and it will print some of the page. (it seems that it prints better if its only text and no image or ink.)  Sometimes, I have to uninstall the printer and install again.

    The pilot is a 19.8 for the printer?

    It is printing only about 10% of a page.

    It says at the top. Any idea here?

    ERROR: UNDEFINED
    OFFENDING COMMAND: @7NLD
    BATTERY:
    -DICTIONARY-

    As I print multiple pages the Offending command: changes. Here's more

    OFFENDING COMMAND: 6WjhI, T
    OFFENDING COMMAND: =:? E
    OFFENDING COMMAND: QN! QQ.c #RS',

    Any ideas? Thank you very much!

    @Marketqr

    Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

    If you are not familiar with messaging private forum please click here to learn more.

    Thank you
    Omar

  • HP 2055dn Printer Laser software for windows 7 does not work

    Have tried several times to install the software for Windows 7 64 bit on my HP 2055dn printer.  Used called download: P2050-full-solution-AM-EMEA1-v6.1.exe.  Still doesn't give me the software, even if the window "uploaded successfully" appeared.  Printer works fine.  I want to be able to access the software with the function ToolboxFX.  What can I do else?

    OMG.  I finally have my ToolboxFX now.  I went to the HP support & downloaded the program page:

    P2050-Full-solution-am-EMEA1-V6.1.exe

    It wasn't the 1st time I tried to install this program (for Windows7 64 bit).  Today, it worked.  I feel like the little engine that could!

  • HP Color LaserJet CM1312nfi MFP does not print, but will copy

    Copies, scans, faxes fine, but when I print the pages are blank. I get messages of ERROR of no..

    When I have access to the pages of menu to perform tasks that includes a print, the pages are blank.

    It recognizes all the cartridges and copy very well.

    Hello mikev9359,

    I understand your concerns. Unfortunately, for this type of printer, I need you to lead our Enterprise Business Community Forums. It will be the right section for this problem. Good luck.

Maybe you are looking for