Laser Jet MFP M127fw Pro: Cannot connect printer Aio App

I can print via wifi from the printer, but the remote Aio app will not pick up the printer. The installation of word does not appear in the name of the printer.

Hello

The HP Laserjet M127fw is not supported by the HP AIO Remote application, not for scanning, or for setting up the printer on your wireless network, any application supported by your printer, is listed below:

http://support.HP.com/RS-en/document/c03722645

What task you want to achieve by using the application? as there could be another option for your printer.

Kind regards

Shlomi

Tags: HP Printers

Similar Questions

  • M127FW MFP: Laser Jet MFP M127FW Pro stuck displaying "printing Page Fax: 2.


    I managed to Flash the newly updated firmware. I didn't have to clear the NVRAM. Thanks for the PM has even thought that I didn't need her. Good to know if it happens again.

  • HP Laser Jet MFP M127fw Pro: How can I enable send/receive faxes "On" or "OFF"?

    I just bought and installed an HP Laser Jet MFP M127fw Pro and I am really impressed so far! However, I can't figure out how to activate the fax answer simply 'on' or 'off', which is my preferred way of handling. Any suggestions? Thank you!

    Hey @BWC3,

    Welcome to the Forum from HP Support.

    I understand that you're looking to configure the settings of your HP LaserJet Pro MFP M127fw fax.  I would like to help.

    Here's what I recommend:

    • In the front panel of your printer, press Setup key
    • Touch Fax Setup
    • Touch basic settings
    • Tap Answer Mode
    • Here you can choose either Manual or Automatic.  'Manual' selected you are essentially turning the fax answer capacity off and "Automatic" would naturally be the setting 'on '.

    Let me know if you need help - I'm always happy to help you.

    Have a great weekend!

  • Laser Jet MFP M127fw Pro: Windows 10 Upgrade causing failure print

    Installed Windows 10 free update of Windows 8 - everything is going well until an automatic upgrade on August 13, 2015.

    Since the 8/13 patch (?), the Laser Jet Pro MFP M127fw spool print jobs, but do not go to the printer.

    Removed and reinstalled HP provided the CD with the same results.

    Test print at the end of installation OK.

    When you try to print from Outlook 2003, Windows 10 returned two error messages

    It said printer error state.

    Other says something about outbind failure.

    Same feeling of failure for Adobe 11.0.12.

    Word and Excel also

    Name of the default printer in Windows print Manger is:

    HP LaserJet MFP M127-M128 PCLmS Pro.

    HP "AUTOFIND PRODCUTS" set ID's of this printer as:

    MFP HP LaserJet Pro M1136

    Resolved failure printing using HP diagnosctic tool 'HP and Scan Doctor 4.7 printing'.

    Installed an AVAILABLE to update the printer driver.

    Not until the 'WITHDRAWAL of POWER' to restart.

    Everything looks OK now.

  • Color Laser Jet MFP M176n Pro: Cannot print bar code in the PDF document

    We have just received our Laser Jet printer and tried to print a PDF document that has a barcode in the lower left corner. The document print very well however the barcode area is empty and the numbers under the barcode are printed.

    How can I get the barcode to the printer?

    I thank very much for your guide, we printed the document as an image. My husband tells me that this happens because the primer is not postscript.

  • Laser Jet MFP M127FW Pro: Will not stop "hologram fax page 1" and is stuck in this mode

    I have Laser Jet Pro MFP M127FW.  This morning, a fax came through, and printed, however, the touchscreen rpet ' Print Fax: 1 Page, "with absolutely nothing to print.  I can now no longer print documents, or send and receive faxes again.    When I leave on this screen, the message disappears and comes back about a minute later for inactivity.  I tried to unplug and plug the unit in the.  I tried to use the switch to stop the machine.  When the powers of the slot machine, he will immediately return to the ' print fax Page: 1. " I tried clear memory and also the power resets. I keep reading on a Ret NVRAM and I would try it, but can't find anywhere it is displayed!

    It is a real problem for me because I use the fax machine throughout the day!  Can someone help me?  Thank you so much in advance!

    Hey @nhorn1115,

    Welcome to the Forums of HP Support!

    I understand that you have a fax job that will not print from your printer Laserjet M127fw range. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. When done, remove the cable from the back of the printer's fax. Now:

    1. Click on the configuration icon that looks like a key.
    2. Click on Service.
    3. Click Fax Service.
    4. Click clear saved faxes.
    5. Connect the cable of the fax.

    Please let me know if this clears the stuck fax. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • HP Laser Jet MFP M127fw Pro: Reduce the font size of iPad Air

    I installed the HP ePrint app on my iPad Air and print by AirPrint on my Laser Jet Pro M127fw MFP printer. The font size is too large on the print job. How can I reduce the font size for my iPad Air printing?

    A big thank you to ice at the service of the cloud, the problem has been completely resolved.
    Thanks to the team

  • Color Laser Jet MFP M277dw PRo: delay in printing

    It takes more than 30 minutes for my print job print. Is it normal? I have a Mac

    Welcome to the HP Forums @cbyrd,

    I understand your print jobs take more than 30 minutes to print and you would like to know if this is normal. This is not the expected behavior, and I'd be happy to help you.

    We will restore the printing system, repair disk permissions and add the printer:

    Reset the printing system

    1. Click on the Apple icon and then click on System Preferences.
    2. In the hardware section, click Print & Fax/Scan. The Print & Fax/scanning dialog box opens.
    3. Do a right click (or Ctrl + click) in the left panel and then click on reset printing system...
    4. Click OK to confirm the reset.
    5. Type the name and the correct password.
    6. Click OK to reset the printing system. The Print & Fax dialog box shows any selected printer

    Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

    Repair disk permissions (If you have 10.11 use these instructions, otherwise move to the next set of disk Permission repair instructions).

    • Click on your desktop so that it is written next to the Apple Finder icon, and then click OK (you will see this next to the Finder after file, edit and view).
    • Under Go, click Applications.
    • In Applications, select utilities.
    • In the Utilities folder, you will see disk utility, double-click on this icon to open the disc utilities.
    • Click on your hard drive, and then click first aid. Click OK to allow it to run.

    Once the repair is complete, restart the computer and download and install the printer HP for OS X drivers.

    Repair disk permissions

    1. On the Dock, click Applications, then utilities.
    2. Double-click disk utility.
    3. Highlight your hard drive / partition on the left (by default this is "Macintosh HD").
    4. Click repair disk permissions at the bottom of the window.
    5. Once the repair is complete, restart the computer and download and install the printer HP for OS X drivers.

    When you add the printer, please ensure that you use the HP driver.

    1. Select Add another printer or Scanner
    2. Select the printer that you add, and next to the 'use', you can select the printer driver

    Please let me know if that solves the problem and click the accept button Solution below to report your post as solved. If the problem persists, I would like to know how the printer is connected to your wireless mac, USB, or Ethernet cable network and let me know what version of Mac you have too please.

    Thank you.

  • HP LAser Jet MFP M127fw Pro: Problem with receipt of the fax - HP LAser Jet MFP M127fw Pro

    Hello

    My fax machine can send a fax but it cannot receive.

    I tried via the internet and the problem is "your fax has failed, because the recipient line rang, but he had no answer.

    That is to say that he sent me a fax but my Fax does not display an incoming call.

    I tried to reset the printer and it did not help.

    Hi @yar94,

    I was able to open the link using Firefox. Here is the information provided in the document.

    1. Send a fax of text on a page in black and white at 1-888-hpfaxme (1-888-473-2963).
  • Color Laser Jet MFP M177fw Pro: Duel side printing

    Is it possible to put this machine do Duel back?

    Hello

    Your ony printer supports duplex MANUAL , which means that you have to turn the paper yourself using the instructions of the software on your computer. It will print odd/even pages first then ask you to convert documents and continue to print the odd pages.

    http://WWW8.HP.com/au/en/products/printers/product-detail.html?OID=5303445#! tab = specifications

    You must follow the directions on the pages or will come out in the order.

    Kind regards.

  • Laser Jet MFP M125nw Pro: Add a printer to the network WPS button


    Hello

    Do you have any computer? Pop the CD on your computer and start the installation. 10 minutes or more and the work to be done.

    Kind regards.

  • Color Laser Jet MFP M277dw Pro: frequently updated software

    I am the owner of a color Laser Jet MFP M277dw Pro. I get updates almost every week, and the software update is very strange. I'm clicking on the update system, it takes a lot of time to meet up with the text saying I'll remove the actual update or add another device. When I say no, thanks, I'll get a message saying that my update was successful (but only if I have to cancel this message). I don't understand why I have to go through this illogical question. Also, I don't understand why it is not necessary to update very frequently, especially when there is no explanation of the reason why.

    The two just exclamation points annoy me because I think that there must be a problem with the software, even if the printer works well.

    Sincere greetings

    Arne H. Wilstrup
    Denmark

    AHW

    Greetings @ahw,

    Thank you access the Forums from HP Support for extra support! I see that you have problems with updates of window for the printer software. I'd love to help you.

    Given that the printer works, I would say to hide updates.

    A poster tried to show or hide updates and it solved their problem.

    You can also give your feedback to Microsoft, and if all goes well, they will release an update to correct the function of the operating system. You can learn how here; Updates and feedback.

    If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

  • HP Laser Jet MFP M127fn Pro: How to send a fax using speed dial?

    I have a new HP Laser Jet MFP M127fn Pro: how to send a fax using speed dial, I entered already numbers in the address book.

    I'm embarrassed to say that I spent several hours trying to get the speed dial to work on a M127fn.  It turns out that there really no speed dial.  That's the conclusion of at least a HP tech that actually used the machine.  Another tech was able to describe a way to fax a phonebook entry, but it is quite too complicated to be called a speed dial.

    [1] press the button settings (key).

    [2] press the right arrow to access the phone book.

    [3] press OK button.

    [4] use the right or left buttons to reach the desired phone book entry.

    [5] press the OK button to reveal the label for the entry, or "empty" if it is not set.

    [6] press the OK button if the element is set to display the fax or dialing options.

    [7] press FAX to initiate a fax to this phone book entry.

    My users find it much easier to have their phone numbers pasted on the machine where they can connect looking them to instead scroll through menus, for the right option.

    It seems that there is some sort of disconnect between hardware, firmware, and technical writers on this machine, because this ancient feature has been neglected, and the user guide is left to sputter on the issue.

  • laser jet mfp m127fn pro: need manual for laser jet pro mfp127fn

    There was no selection board for printers.     I need the manual for a laser jet mfp 127fn pro.  whenever I click on this manual, on the website of hp, I get a blank screen with a tiny 'x' in a small circle at the top left of my screen.   can someone tell me why I can't access the manual?  I do not have a firewall.

    I'm happy that using another browser worked for you.

  • Laser Jet MFP 127fw Pro

    I have a Laser Jet MFP Pro 127fw. I can scan by clicking on the icon to scan on my desk. Is there a way I can add an option to scan for the small screen on the printter where icons for 'Copy', 'Fax' and the 'Apps' icons appear? Or do I always have to run a scan directly from my PC?  Thank you.

    Hello @jvelazquez, thank you for this question! I will do my best to help you today.

    From what I understand you do all your scans of computer software. Ask yourself if you are able to download a scan icon on the front of the printer display panel.

    Here is a link to the user for your MFP HP LaserJet Pro 127fw guide. User's guide.

    From what I see, what you ask is not an option on this model. We hope this isn't too much of an inconvenience for you.

    Thanks a lot for your time! Can't wait to hear back on your part! Have a great week.

Maybe you are looking for