Laserje CP2025n: Cannot enter the secret menu on the printer HP Laserjet CP2025n range

Similar Questions

• Cannot install the printer Hp laserjet 1020

  Original title: cannot install my printer

  I bougth a new computer with windows 7, I try to install my priter hp laserjet 1020 I have the instalation disk but the computer can not find the driver, so I download the driver from the web page hp, but also the computer cannot read o found when the web site hp say's it

  Hi Michael,
   
  In addition to the suggestion of Palcouk, follow these steps and check if they help.
   
  Step 1:
   
  After you download the drivers from the manufacturer's website, right-click on the Setup file and run as administrator.
   
  Step 2:
   
  Temporarily turn off UAC (User Account Control) and try to install the driver.
   
  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.
   
  Drivers download for HP LaserJet 1020 printer
   
  Printer HP LaserJet 1020 (32-bit driver)
  Printer HP LaserJet 1020 (64-bit driver)
   
  Also, be sure to have a look at the installation procedure.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Cannot install the printer HP LaserJet 2300 on Windows 7

  original title: I have a question

  Morning

  I tried to configure my computer to 32-bit windows 7 on Hp LaserJet 2300 printer, but it does not work. Please help me

  Did you get the drivers from here?

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=238802&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=238800

  Otherwise, you have to...

• Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  I bought on ebay and the seller sold me a dubious version of xp so I want to format and install my own at the start he said:

  The Intel Boot Agent GE v1.2.31 initialization
  KE - E05: the LAN adapter's configuration is corrupted or has not been initialized. Boot agent cannot continue

  Hello

  The message looks like you tried to boot and install Windows LAN

  If you want to change the boot order, I recommend pressing the F12 key, immediately after that the laptop was turned on!

  A new start menu should appear, then you can choose the reader of CD/DVD (ODD) and a boot device.

  Also by pressing the C button should allow you to boot from the CD inserted, bootable.

  Welcome them

• URGENT! After installing 6 Fusion and creation of new virtual machine with Windows 7, I get a message "VMware Fusion cannot enter the unit". WHAT SHOULD DO?

  After purchase, installation and activation Fusion 6 with the license key, I had a library of VMS showing 2 Boot Camp partitions. It's strange that I only have 1.
  I tried to activate them but received a message that it is out of date in 2 cases. (see annex 1)

  I started a new virtual machine with a Windows 7 installation disc directly on my HD. I have provided a way to do this and followed the instructions of Fusion to the screen.

  Apparently, everything went well and after several restarts, the installation appears to be over (see annex 2) I tried to open and run the installed Windows 7. I had however a window with the following message:

  "Pending the unit.

  "VMware Fusion cannot enter the unit. Please wait until the unit starts automatically, or interact with the virtual machine below. ' (see annex 3)

  Here Windows 7 seems to start but after a while with the home screen and of the Øresund finishing this window closed and open a new window called library Virtual Machine on the left showing the partitions of Bootcamp and the Virtual Machine Windows 7 x 64 and in the middle gray a representation of what is supposed to be the Windows 7 desktop. (see Exhibit 4). When I opened the settings button a window with different setting options pops up. This mark means to me that Windows is installed but the final opening isn't the case

  When you quit Vmware Fusion indeed Windows seems to be close (see part 5)

  What is going on? What has gone wrong? What should I do? I don't know how to solve the problem.

  I should f.i. remove the virtual machine from Windows 7 and is free automatically made partition on my HD as the reboot with the Windows installation disc? or y at - it another way to enter the UNIT?

  Help, please!

  Thanks in advance

  Your virtual machine is running. It is in the unit - which each windows gets its own window of Mac - and you have no application Windows running, there is no visible windows. You can start a Windows application in the start of Fusion menu in the menu bar at the top right, or turn on the Windows task bar on the view menu and start applications from there. Or use the view menu to switch to the Single mode or full-screen, which puts all of your Windows desktop in a window separate from Mac.

  You do not have two partitions to Boot Camp on your Mac, you have two virtual machines named "Boot Camp partition".

  The message about it being unable to enter the unit arrives while the merger is pending for the tools begin to run, because the tool is necessary for the unit.

• P1102w - cannot find the printer

  Hello

  I'm unable to print using a wireless connection.

  the printer is p1102w.

  operating system is MAC OS 10.10 Yosemite

  Whenever I try to print something I get "printer is not connected / cannot find the printer" message.

  I tried the solutions on your support site, but nothing helped.

  For sure, printer is connected to the same network as the computer. I see it on the print configuration page and I can connect to its IP address via a web browser (but I can't use web services).

  All software and drivers are up to date. Update Apple is nothing new to me. Niether have your site.

  I tried to move the printer closer and further away from router. No results.

  No web proxy is related to my network.

  To make this work, I have to remove the printer from my system, reinstall it using the USB cable, and then add it again via wi - fi.

  But some time the problem reappears.

  It's really frustrating. Help, please.

  Hi @xopot ,

  I see that you have problems printing via wireless network. I would like to help you today.

  Since you can access the printer embedded Web server, the printer would have a valid IP address. Most likely, it has something to do with the software that the printer uses.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  

  

  Configure a static IP address for the printer.

  The printer is not found during Installation wireless.

  Do not take into account the title. Select the Solution 4: assign your printer a static IP address.

  If you need help, let me know.

  Have a great day!
  Thank you.

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• you forgot to enter the printer code during installation

  Impossible to enter the printer code during the installation steps. How can I do now?

  Hello

  The printer, go to settings, open the Tools menu and select Restore Factory Defaults. Click OK to confirm.

  Now click on the ePrint button, select Enable ePrint and wait several minutes, a new certificate claim code will be printed.

  Enter the connected HP site and add the printer using the newly created application code and follow the instructions on the screen.

  Kind regards

  Shlomi

• Cannot find the printer HP Deskjet 3055 has wireless

  Hi bought this printer and went through the set up disc. The printer is connected and has the right signal to our home network and the laptop also connects wirelessley to the internet just fine. The laptop cannot find the printer - I tried all the suggestions and put the IP address for internet search and it will not. I can't understand. Also tried to install on the MAC laptop and still only goes up to now and then are unable to communicate with each other. Please can I have some advice.

  Oh, wait a minute--I just got it working by stopping laptop, printer and disconnect the wireless router and all start back them up again. Then to try to make it work on the MAC laptop - what this space! Thanks for the help.

• Cocomputer cannot find the printer and I do not have a disk for it

  Original title: printer SUPPORT

  my computer cannot find the printer and I do not have a disk for it

  Then, download and install the appropriate drivers on the printer manufacturer's support web site.

• HP envy 4500: PC cannot find the printer

  I ran the installation disk and printer tells me that I am connected. Wireless light is stable. PC cannot find the printer.

  Hello

  I'm glad to hear that your problem is solved and everything works fine now.

  Good day!

• Cannot install the printer and windows update error 80070026

  Original title: Registry Editor not work cannot install the printer

  I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

  Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
  for example:C:/windows/log/cbs/cbs.log

  I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

  Regedit.exe.4288.dmp
  Regedit.exe.3280.dmp
  Regedit.exe.2292.dmp

  I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

  also receive error installer that it is already running
  install GUI is unresponsive

  error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

  I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

  Hello

  1. What is the serial number and model of the printer?
  2. What are the failed updates?
  3 have there been any changes made on the computer before the show?

  I suggest you try the steps to solve the problem with the installation of printer.

  Method 1:
  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  For more information, see the links:
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  Search for a printer, the manufacturer Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I suggest you try the steps to fix the problem with Windows Update.

  Method 2:
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

  Method 3:
  Temporarily disable the security software.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 4:
  You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx

  For more information, please see the links.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

  Hope this information is useful.

• Cannot install the printer HP C4500 on Windows 7

  Cannot install the printer HP C4500 on Windows 7 - printer installation disc only supported by xp and vista.  What should I do?

  Yes, your solution worked, and I was finally able to connect my C4500 printer as wireless.  Thank you very much for your help!

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• Cannot install the printer. The print processor is not (winprint)

  According to the scenario:

  DC1 in site 1 runs Windows Server 2012 Standard, printing and Document services are installed. Many printers are installed and work.

  DC2 in site 2 is running Windows Server 2008 R2 Standard 64-bit, printing and Document services are installed. I want to install printers that users in this site must be able to print with.

  Same printer exist in both sites. In Site 1 on DC1, I was able to properly install the driver, add the port and installed the printer.

  I took the same driver DC2 and installed. I created the Port with the IP address of the printer but when I finish the Add Printer Wizard I get an error message saying: cannot install the printer. There is no winprint print processor.

  I was looking in many forums and before you ask, the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint key does not exist on two domain controllers (tried to create thispost), but makes no difference.

  The winprint.dll file does not exist in the C:\Windows\System32\spool\prtprocs\w32x86 directory on any of the machines, but is located under C:\Windows\System32\spool\prtprocs\x64 on the two machines.

  There seems to be no difference in configuration between these two machines, but as I mentioned abov, on DC1, I'm able to add the printer, and I'm not on DC2.

  Is there anything I can do to get the job to the printer on DC2?

  (And for those who ask why install on a domain controller, there is no member server in this site).

  Thank you

  Hello Josi,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Thank you

• Cannot install the printer. The print processor does not exist.

  Windows 7 Enterprise 64 bit.  I am able to install HP LaserJet printers but no virtual printer.  I can not load the XPS from Windows printer or Print to OneNote.  I also tried to load more than one PDF printer and none of them work.  The error I keep gettig to "cannot install the printer.  The print processor does not exist. »

  Any ideas would be appreciated.

  My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.

  Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction.   We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.

  [Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]

  You wanted to post this in case someone else ran into a similar problem.

  This is what worked for me.

  I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).

  Step 1: Stop the print spooler service.

  Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.

  Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.

  Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.

  Step 5: Start the print spooler service.

  Try to connect or install your net printer and it should work now.

  I hope this work for all of you.