LaserJet 1022n printer (spooler Services) question

Similar Questions

• The Print Spooler Service has stopped. Restart the print spooler and try to print and make the same mistake.

  Recharging according to the printing software and get always the same error.

  Hello

  You must ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==================================

  Here is a troubleshooting guide for Windows 7 - Vista would be very similar.

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ==================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with the manufacturer of your printer and forums support.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service (see the following link BlackViper for Windows 7 default dependencies)
  http://wiki.blackviper.com/wiki/Print_Spooler

  BlackViper Windows 7 Service - default settings
  http://www.blackviper.com/Windows_7/servicecfg.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• the print spooler service may not be running

  Hello

  I have 4 computers around here, and I'm trying to get a printserver running on one of them, so we have installed windows 2008, set up as a server to printing etc..
  Now when I try to add the printer to my computer laptop windows 7, it works perfectly, and is the same for one of the windows xp workstations.
  However, when I try to add the printserver on windows server 2003, it starts talking about missing drivers.

  The printer is a HP LJCP3505 PCL6, and he is already working on a normal (eg. non-printserver associated) network.
  I downloaded almost all the drivers, I could find from the HP website, but whenever I try to add them, it tells me that they are not valid drivers.
  and on another computer windows 7, I get the following error message:

  Could not connect to the printer.
  On the server print spooler service could not be executed.
  Restart the spooler or restart the server

  (on a side note: it's a translated error message, our systems are not English)

  I don't know if they are related, but I checked the print spooler service, and it was fine (auto startup, active etc.).
  the same goes for its dependencies.

  Hi LeanderML,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Forums in Technet Windows Server.

• Windows 2003 terminal server print spooler service stops frequently

  Windows 2003 terminal server print spooler service stops frequently

  Hello Vijay Bedre,

  Thanks for your post.  Please ask your question in the forum of Remote Desktop Services TechNet as they manage all the server related issues.

  See you soon

• When I try to add a printer I get a watch box (Printer Spooler services does not work)

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  How to ask a question http://support.microsoft.com/kb/555375 -
  SC Tom
  -There is no such thing as TMI if you request technical support.

  The print spooler service is stopped and the printers and Faxes screen is empty, you cannot add a printer and (usually), you cannot print either.  It happened just before this problem occurred?

  Start the print spooler and make sure that it is configured to start automatically:

  Start > run > services.msc > OK

  When the Services window opens, scroll down to the print spooler.  Double click on it.  Make sure that the "Startup Type" is "automatic".  Click on the button 'start '.  OK, go out of your way and close the Services window.

  If the print spooler stops again immediately after return.

• printer is not working, "the print spooler service is disabled" when it is not

  Hello

  I received a message that my pc required for the loading of driver software for a new unknown device, although I had nothing added.

  Now, I find that my printer is not working.

  I tried to accept the "locate and install driver software" message, but it does not work.

  I tried to uninstall the printer driver so that I can reinstall them, but I get a message that the uninstallation was failure because the print spooler service is disabled.

  I checked the print spooler service is set to auto & seems to be on.

  Would appreciate any opinion appropriate for a no no very savvy tech.

  Thank you

  This could be the reason why you do not see the printer in the Control Panel, printers. Try this, go to control panel, printers, if you see the printer listed to remove it. If you don't see the printer, the service could stop, go to services then and click on "Restart the service" (blue link top left), then go back to printing, its listed hopely now and you can remove it (right click). Now try to reinstall the printer.

  If that doesn't work try the system restore, restore to a date when the printer works fine.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Or try the intructions on the link from my previous post. on "how to clean the printer drivers? It is to change the registry, make sure you follow the instructions carefully. Back up the registry, you want to change.
  How to make a backup of the registry in Windows 7, Windows Vista and Windows XP?
  http://WindowsXP.MVPs.org/registry.htm
  Use method 2.

  WARNING: With the help of the Publisher of the registry incorrectly can cause serious problems may require you to reinstall Windows. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use the Publisher of the registry at your own risk.

  How to use the registry editor in Vista and other Techniques
  http://www.Vistax64.com/tutorials/178285-registry-editing.html

  Information in the Windows registry for advanced users
  http://support.Microsoft.com/kb/256986

• problem with the Windows Vista print spooler service, hp

  Ive just bought a printer hp deskjet 2050 all in one series printer j510, instillation goes very well until you connect the usb to the pc printer, then the next bit says sorry cannot locate the driver, so I try to download the driver from the Web site after that try again it says "the following questions have been detected. windows print spooler service. I have no idea how to get around this and annoyed the need the printer last night when I bought:(toute aide serait appréciée, nous avons essayé de passer sur le matériel et aucune imprimante n'apparaît, si nous allons ajouter une imprimante à travers cela ne fonctionne pas:()

  Hello

  1. you receive an error message?

  2. were you able to install the printer successfully on your computer?

  3. when exactly you receive the Windows print spooler service message?

  4. have you made changes on the computer before this problem?

  You can check out the following link and check.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• Windows must now restart because the print spooler service terminated unexpectedly

  I have a PC running on Windows Vista professional that I had for about a year with two printers that have also been all this time, a HP LaserJet 1000 and an Epson SX105.

  This morning, amid a series of PDFs (separate files) printing on LaserJet printers, I suddenly had the following pop-up message:

  "Spooler SubSystem App stopped working and was closed".

  On the Control Panel, I found that my two printers have apparently disappeared.  My first reaction was just close and restart the computer, often kind of seeds.

  To restart, I tried to print again, but I was told that I had to install a printer.  Trying to install a printer, I learned that I could not because of a problem with the spooler.  I looked online to find a solution and one that suits (without touching the registry) seemed to be to check the operation of via Control Panel's print spooler, and then restart.  Oh dear.  What a mistake!  I did this and found that the printers have reappeared, but then about 30 seconds later, I got the following pop-up message:

  "Windows must now restart because the print spooler service terminated unexpectedly.

  Each time it restarts the message comes back after less than a minute and restarts on another 30 seconds later, so I have a chance to try a system restore (I installed the last service pack Vista a couple of days), or something else... it's just in a loop of perpetual reboot, I can't stop restarting Windows.

  How the hell do I?  (I send this message using my Vista laptop and pray the same problem occur here, too, so I don't have to print anything).

  Hello

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check the Mr Fixit here and if you use the other methods go back and try again later.

  Problems printing and printing errors
  http://support.Microsoft.com/GP/printing_problems

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  ------------------------------------------------------
  Clean the General corruption and replace all the lost files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to fix print spooler services in the field 2008

  How to fix print spooler services in the field 2008

  Windows Server gurus hang out in the Windows Server forums, better to ask this kind of question it:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Unable to connect to a printer in Windows 7 due to the Print Spooler Service

  Hello Experts,

  I use a network of customer based on the server where there is a linux service FTP server for storage of MS Office (2003, 2007, 2010) files and client computers based on Windows (XP, 7).

  There is a PC customer who is not able to connect to the printer based on Win7. I did the following procedure
  Typed \\(IP Address of PC (Win7 based) on which the printer is installed.
  An Explorer window opens, I right click on it, click on connect. It gives the error message that the Printer Spooler service cannot run or the machine needs to be restarted.
  I checked from the local printer spooler service, it was running, I stopped and restarted but the same error again.
  I rebooted again all networked systems, but the same error.
  I changed my IP address but invain.

  I am also having the following please guide other network problems,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/FTP-and-printer-networking-problems-in-Windows-7/ed324d6a-56a0-4f3b-86cd-2c911730edd1

  Hello

  Thanks for choosing Microsoft Community.

  I understand from the description of the issue that you are having problems with the connection to the printer on Windows 7.

  It is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• Print Spooler service is not running, or active directory domain services is currently unavailable.

  Original title: my printers on WIndows 7 seemed to have disappeared...

  Printers are not listed for printing set up in Word, Notepad, Adobe, etc., when I try to add a printer, he said the local print spooler service is not running, or domain services active directory is currently unavailable.  Printers are shown on the list of devices, and when I run the troubleshooting it says that the print spooler problem is solved.  but I still can't print.  The question is on a laptop Samsung bought in store Microsoft to OakBrook, Illinois.

  It started on 8 July and I was not able to resolve since.  In reviewing the restore points, I don't see any problems, and printers are recorded in the other PC, I plugged in.

  Thanks for your help.

  Imran,

  Thank you very much for the reply onse.  I appreciate it.  I tried your suggestions and everything in the fix he said that the print spooler has been repaired, it would not print.  I ran the scanner and came without any problem.

  I did a restore of the system to a point prior to the issuance and the printers are busy, apparently something in an update has a problem.  I'll look next week and see what happens.

  Thanks again for your reply and your suggestions, I appreciate it.

• Print Spooler service is not running

  I'm trying to re - install my printer, but I get a message that says "operation could not be performed. Print Spooler service is not running.

  Hi pyq718,

  Follow the steps below to check the print spooler.

  1. type services.msc in run (XP) or search programs and files (Win 7 and Vista)

  2. click on the (local) Service

  3. scroll down until you get to the print spooler, and then click on it once to select it.

  4. in the top left corner, you can stop and then start the spooler to make sure it is running.

  

• Equium M40X: Cannot print - not done. Print Spooler service does not

  My notebook Equium M40X has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. "print spooler service does not. I get this message even when you try to install the original installed printer drivers.

  To resolve this problem, I went to the services.msc to attempt to start the print spooler, but the command is not here present and seems to be missing. I also tried to launch it by clicking Start and then run and typing "net start spooler", but even once, it does not. Can anyone help with this?

  My laptop is an Equium M40X and the operating system is Windows XP Service Pack 2.

  Hello

  This error occurs because the spooler service has not been started or has stopped working.
  It seems that this error is known to Microsoft and they decided to public an article in the knowledge base that could help solve this problem.

  http://support.Microsoft.com/kb/314876

  As you say that the spooler service must be restarted.
  To start the spooler service, follow these steps:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field

  If you will not be able to restart the spooler service, you can try to restore the Windows operating system to the point initially by using the Windows System Restore tool.

• Problem printing - "operation not completed; "print spooler service does not.

  My laptop has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. Print Spooler service is not running", even though when I look in the Services, it is running. I am running XP Build 2600.xpsp_sp2_gdr.050301 - 1519: Service Pack 2.

  Hello

  According to the description in this document from the Microsoft Knowledge base:
  http://support.Microsoft.com/?kbid=314876

  Please try this:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field.

  Maybe it helps you solve this problem.

• How can I activate the print spooler service on

  My computer says the print spooler service stops when I'm going to use a printer. How do I reactivate.

  Hello
  Please tell us the version of the Windows operating system you are running on your computer.

  I'd take a peek at this thread as well. It is specific to Windows 7, but you should be able to many of the same steps apply to Windows Vista or Windows XP if you happen to have one of the people.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/print-spooler-issues-in-Windows-7/3ae31e43-71ce-4847-ad9e-1d2936eabb83

  I hope this helps. Just reply to the results.