LaserJet 200 ColorMFP M276nw: Cannot scan computer, but can print

Similar Questions

• Configuration of scan file on HP LaserJet 200 colorMFP M276nw

  Hello

  I'm trying to set up my printer to scan to a network folder.

  HP LaserJet 200 colorMFP M276nw

  OSX 10.9.4

  WLAN (printer and office on the same network)

  Here's the problem; No matter what I try, I can't have the printer to scan directly to a network folder.

  When you test the connection I get either the ' invalid password or username "or the error"unable to connect to the network folder.

  It seems that the biggest problem is the printer in the right network folder referring.

  I shared the folder, but I can't get a valid path name, that apparently.

  Show folder properties: / Users/vdlely/Dropbox/max verhuur/Scans

  Obviously, this is not complete; I need to add the location of the machine, such as: //iMac-van-AJ/Users/vdlely/Dropbox/max verhuur/Scans right?

  No matter what combination I try, nothing works. I used the name of the computer, IP, with and without login etc etc.

  What is the correct path in my case?

  It would be MUCH easier if you have added a simple browser to navigate to the correct location.

  Please help me to set up right.

  Hi @Aernoud,

  I see by your post that you are having problems for parsing of the configuration of the network folder. I can help you with this.

  I have provided a document to configure network scanning.

  How to perform a scan: from the control panel (including the Scan to Email, in PDF format, and to a network folder).

  Please try the following steps:
  
  1. create a new folder on your computer.
  
  2. right-click (CTRL left click if you use the keyboard of the Mac) and select read.
  
  3. unlock the screen, set all term read/write &, located under the share permissions &.
  
  4. enter in System Preferences > sharing, then select, sharing files in the left bar.
  
  5. click on the Options button, mark the share files and folders using SMB (Windows) and click done.
  
  6. under shared folders, click the sign more and select the configured folder.
  
  7. ensure that "everyone" permissions are set to read & write under the list of users as well.
  
  8. you will see the IP at the top of this screen, make a note to configure the EWS page.

  I think that in consequence of this model of path, you should be able to implement.
  
  Name of the computer or IP address/Shared-folder-name of the computer

  or

  -The computer name or IP name of the computer-folder-address\Shared

  Find out what the name of the computer as follows:
  Go to the Apple/Mac/More report information software/system about / click on the left side on the right side, it should show the name of the computer.

  NOTE: The folder must already exist. You cannot create the folder in the built-in Web server.

  To find the path of the folder where the scanned images are saved, hold CTRL and click on new folder
  created / click on get info/verify shared folder/then copy it to the folder path.

  User name - the name that you use to connect to the computer.
  
  Password: the password allows you to connect to the computer.

  Please let me know if it worked.

  Thank you.

• HP LaserJet 200 colorMFP M276n: HP LaserJet 200 colorMFP M276nw won't sleep

  HP LaserJet 200 colorMFP M276nw'm not going to sleep no matter how configure configuration.

  It ' on an Ethernet cable. WiFi and FAX are disabled. No local USB not connected. LCD Panel and web access see the that he was put to sleep after so many minutes of inactivity.

  He used to go to sleep, that is the LCD screen is off and the power LED flashed, as expected after the period button inactive specified, 15 min...

  I'm not 100% sure, but I guess it started showing this symptom as I replaced the black cartridge with a genuine HP one. Nothing has changed, and I doubt that if the issues of the cartridge. I've updated the firmware to 20150212, but no help.

  When I tried to update the firmware locallly, the LCD panel said he is not able to connect to the server even though it is perfectly on our LAN and connected to the Internet. For example I can scan documents to send to e-mail addresses.

  All attempts resulted negative. So I have a chat session with a HP tech support but it could not solve the problem. In addition, there was a much more serious problem with the printer which toners all came out with less than 100 printed pages. However, HP has launched a warranty replacement process and I'm waiting for the forthcoming replacement.

  Thank you, John, to remind me of important base of troubleshooting by isolating the problems one by one!

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• HP Laserjet 200ColorMFP M276nw: PCL XL Error, HP LaserJet 200 ColorMFP M276nw, Windows 8.1

  Printer: HP Laserjet ColorMFP M276nw 200

  Installation: cable network using the complete package PCL6 (last available online)

  OS: 8.1 64-bit Windows

  Problem:

  When you print to some programs (for example the Page of Test, Microsoft Word), the printer prints a page with the following text:

  PCL XL Error

  Subsystem: kernel

  Error: IllegalTag

  File name: kernel.c

  Line number: 1921

  Printing from Notepad works very well. Printing on other computers on the wired network is working properly.

  Troubleshooting steps:

  1. Updated firmware update
  2. Uninstall, and then reinstall using the latest version of the software available online
  3. Changing to optimize for the text on the Advanced tab.

  Thank you for your help.

  As explained above, it could be a fault of the driver, or intermittent corruption by the hardware, or (as http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/M175Nw-PCL-XL-errors/m-p/4940252 says) the result of a recent update of AVG anti-virus.

• problems of Config on HP LaserJet 200 colorMFP M276nw e-mail

  Hello

  I'm trying to set up my scanning to e-mail via the web interface of the printer (from my Mac).

  I get my information from e-mail server exactly as my e-mail client is configured, but when I test, I get the following error:

  Cannot resolve the SMTP server. Check this setting with your system administrator or your Internet service provider.

  The specified server is smtp.cogeco.ca and port 25.  No authorization is required (Cogeco is my ISP, and I'm on their network).  I can telnet to the server of my Macbook on port 25 and both my Macbook and the printer are connected to the Cogeco network using the same WiFi router.

  I can scan to a network folder in my local network without any problems.

  I'd like to get the scan to E-mail feature works, but without details of the connection problem, I do not see how to do this.

  Any suggestions?

  Hi Spin2Win,

  I appreciate that you try to configure the scan to e-mail.

  I'll be happy to help you.

  I have provided a document for how Scan: from the control panel. Select Scan to an email.

  If you're still having problems, then go to the printer's built-in Web server by typing in the IP address of the printer in your web browser.

  Click the network tab, and then click config IP4 on the left side.

  Click on the network (IP) address

  Select Manual.

  Type in the information and the IP address of the printer.
  Set the Configuration to manual DNS address.

  Set the default address as 8.8.8.8
  Set the e-mail address alternative as 8.8.4.4 and confirm the changes.

  Try the implementation again.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• LaserJet 200 colorMFP M276nw: unable to connect to the domain for the IP address. (Wired)

  Initially, I didn't have a drop of lan available to connect this printer to the network so I connected directly to a computer.  I recently purchaced a network switch and connected the printer and the computer to the network through the switch.

  Now the printer is not joining the domain and is not assigned an IP address of our domain.   When I run the network on the printer IPv4 TCP/IPv4 summary and the default gateway assigned is 6.173.243.184 should be 172.20.1.xxx for our domain.

  Lists network ID as NPI138751 hostname with no domain listed.

  The wired configuration netwrok lists as connected.

  Well the only thing I can think, if you have not yet done, are to reset the printer to Factory Defaults and try again to establish the connection.

• I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  Ideas: I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  • Pragrams you have problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I have the Creative Suite CS3. I had it on the old computers are now dead. I've loaded onto a new computer but can't activate it

  a Creative Suite CS3. I had it on the old computers are now dead. I've loaded onto a new computer but can't activate it

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations due to a dead computer

• I bought cs5.5 in the past and I now try to download to my new computer, but can't seem to find the original for this disk. If I have my serial number in order to allow the download. What can I do?

  I bought the cd of the suite cs5.5 in the past and I now try to download to my new computer, but can't seem to find the original for this disk. If I have my serial number in order to allow the download. What can I do to get these programs to download to my new computer without having to buy them again!

  Have you tried to download it from this page? - Products download Adobe Creative Suite 5.5

• Reinstallation on my new computer, but can not activate my Adobe Acrobat 7.0 Pro - 24:24 error code

  Reinstallation on my new computer, but can not activate my Adobe Acrobat 7.0 Pro - 24:24 error code

  You need a special version of Acrobat 7.   See the following...

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• I don't have a computer, but can I buy CC and install it on a Mac or a PC at a later date?

  I don't have a computer, but can I buy CC and install it on a Mac or a PC at a later date?

  Yes, you can purchase the subscription but all invoicing will work by the date you purchased the subscription and not when install you / activate.

  Kind regards

  Hervé Khare

• I have an Imac with 10.6.8 operating system, I would like to know what Photoshop would work on my computer, I know it's an old computer, but can someone please advise me.

  I have an Imac with 10.6.8 operating system, I would like to know what Photoshop would work on my computer, I know it's an old computer, but can someone please advise me.

  Thank you very much

  Photoshop CS6 which you can purchase as a permanent license or use the Lightroom and Photoshop | Plan of creative photography of cloud to Adobe.

  CS5 and earlier are no longer sold and you wraps with a counterfeiting in third markets.

• I had to reinstall Photoshop CS on my new computer but can't activae that – the link seems to be absent.   Can someone advise please?

  I had to reinstall Photoshop CS on my new computer but can't activae that – the link seems to be absent.   Can someone advise please?

  The software was purchased some time ago but now seems to have this problem - it works fine but there is a countdown has begun for 30 days now :-(

  Please ignore my stupidity - doh!

  It has been a while, but in my DVD collection, I found a more up to date version. tried and Bingo!

  Thanks for your efforts.

• to install Indesign on my new computer, but can't. First bought CS2 in 2009 and upgraded to 7.5 in 2011. I have the serial numbers for the two and was able to use it on my last computer. Where should I start?

  to install Indesign on my new computer, but can't. First bought CS2 in 2009 and upgraded to 7.5 in 2011. I have the serial numbers for the two and was able to use it on my last computer. I use Indesign that often but there are some projects that it is good for. Where should I start?

  Lchrichton123 what version of InDesign are specifically keen to install?  You can find links to the installation files for the majority of Adobe Creative software titles of other downloads