LaserJet 4 L and Vista do not play well together

Similar Questions

• 5.5 ESXi and ZFS do not play well together?

  A couple of weeks, I've improved some HP DL380G6 of ESXi ESXi 5.1 to 5.5. One of those contains a Solaris 10 VM with a small volume of ZFS with about 120 GB of data and there are regular backups of that provided by using 'zfs send '. With ESXi 5.1 'zfs send' would complete in about an hour. With ESXi 5.5, it is not finished.

  Try to get a 'zfs send' manually in the command results up to a certain point and then stop. Him 'zfs send' stopped at 8 GB, 20 GB, 40 GB, 60 GB on different series. Whenever it starts to run in misfortune, messages such as these show upward in vmkernel.log:

  (2014 01-07 T 05: 51:16.698Z cpu9:32806) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412fc3bbc1c0, 0) to dev "mpx.vmhba0:C0:T0:L0' on the way 'vmhba0:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2014 01-07 T 05: 51:16.698Z cpu9:32806) ScsiDeviceIO: 2337: Cmd (0x412fc3bbc1c0) 0x1a, CmdSN 0 x 12711 world 0-dev "mpx.vmhba0:C0:T0:L0" has no sense H:0 x D:0 x 2 P:0 valid 0 x 0 data: 0 x 5 0x20 0x0.

  (2014 01-07 T 05: 56:16.708Z cpu15:32812) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412fc2626700, 0) to dev "mpx.vmhba0:C0:T0:L0' on the way 'vmhba0:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2014 01-07 T 05: 56:16.708Z cpu15:32812) ScsiDeviceIO: 2337: Cmd (0x412fc2626700) 0x1a, CmdSN 0 x 12716 world 0-dev "mpx.vmhba0:C0:T0:L0" has no sense H:0 x D:0 x 2 P:0 valid 0 x 0 data: 0 x 5 0x20 0x0.

  
  

  When you look at the performance of the system of ESXi, everything seems reasonable until the moment where performance disappears. On Solaris, the system has more than 2 GB of free RAM and makes a constant rate of e/s until this happens and throughput IO falls to zero.

  
  

  Also has anyone seen this behavior?

  If so, how you haven't solved the situation?
  

  The solution to this has nothing to do with the disks, it was networking.

  To solve the problem, I installed vmware tools in the Solaris 10 host, changed the type of e1000g to vmxnet3 NETWORK card and changed the IP configuration on Solaris 10 using the hostname.vmxnet3* instead of files hostname.e1000g* files.

  So, it would seem that there is some corner performance e1000g behavior cases that appear to be inconsistent between the driver in ESXi 5.5 and Solaris 10 that were not already there.

• Zbook 17 G3: M2 and Sata don't play well together

  Hello

  Have a Zbook 17 G3 with a drive as boot drive m2. After adding a second SATA drive may not start automatically. It will start only if I select the disk in the F9 boot menu.

  It is the first in the boot order and no secure startup is enabled.

  Any ideas?

  MVH

  Thomas

  I solved it by deselecting QuickStart.

• Dreamweaver and AngularJS don't play well together

  Hi, I'm starting on Dreamweaver and AngularJS for the moment and so I'll have a go at using them together. He's not going very well, you can more or less run but Design view, there are red lines around things AngularJS and same property that asks you if you want to remove it...

  I note that it seems to be very good support for JQuery, Visual design support.

  I also note that, in the talks on the AngularJS, they almost never mention an IDE.

  Is there a plan to add support for AngularJS? Or I'm fighting just a lost cause?

  Thank you

  If enough people want the feature, I'm sure it will be added. Use this form to submit a feature request/Bug Report Form request

• CS6 and retina display not working well together please help

  I just bought a subscription for cloud creative and installed photoshop and illustrator on a new retina display mac pro book. The interfaces look pixelated, including work plans. All updates are underway.

  I read that the latest updates of adobe are optimized for retina display. I don't know what went wrong.

  Thanks for your time

  Ask in the forums of product for more details. As a first step, check applications that use the file--> information on executable files. Check, it's not accidentally the half res / low DPI mode is activated. Check also in the "about" info you actually have PS 13.1 and HAVE 11.2, not the basic installation. Run the update for the updated versions last software free.

  Mylenium

• PS4 and Cintiq don't play well together

  This problem is related to the Cintiq 21 UX & Photoshop CS4 ONLY!

  I have a Setup dual monitor: Cintiq 21 & NEC 19 LCD Miltisync 90GX2 Opticlear. Both monitors are driven by ATI Radeon HD2600XT separate cards with 512 MB RAM video. The system CPU is a chip of AMD Athlon 64 x 2 Dual core 6000 +. I charge what I believe to be the latest drivers from the website.

  Start on the side of the Cintiq PS4; load AN image; picture of Get with 6 bunk rectangles and rectangles is divided diagonally into half of the URHC to LLHC. Lower half is good image; superior hald is a color United, crudely pixelated or gibberish. Drag the image a bit and as long as it is moved it is picture perfect; stop dragging and he returns to the image of the rectangles of 6. Drag on the NEC monitor and the image is strong and clear when dragging but goes transparent as soon as mouse.

  Start the PS4 on NEC side and everything is as advertised. Just drag the image to the Cintiq, and he is always good. Now slide PS4 sideways Cintiq, and everything is always good. Open another image on the side of the Cintiq and the problem repeats.

  This problem is perfectly reproducible, does not happen with any other software and makes it practically unusable PS4. PS3 works as advertised and has always.  I've done 4 install CS4 to see if that was the problem, including a record meticulous cleaning between installs. Situation is constant through installs it. Curiously, the bridge does not have the problem.  I send to Wacom as well.  I gave 2 jpg what look like images.

  Any advice greatly appreciated

  Dave

  The OpenGL makes CS4 a different animal.  You can try to disable and see if the establishment works this way.  If so, confrim it's a driver problem.

  Make sure you run v. 11.0.1 CS4 and you have the latest video card drivers.

• LR 32-bit and 64-bit catalogs play well together?

  I plan to upgrade my desktop computer for Vista 64 and LR 64, while my laptop will remain with XP 32 and 32 LR. I have all my catalogs on portable players so I can trade office and long laptop synchronization procedures without having to go through (and hold). I'll be able to keep this one set of catalogs also after the upgrade, that is that will be the same catalogues open easily in read/write on LR 32 and 64 LR?

  The underlying database is the same, as long as the LR version is the same. If the key is to make sure that you run x.x LR on the 32-bit computer and LR x.x on the 64-bit computer. If it is x.x LR and the other is LR y.y, then you have a problem. This is true even in operating system platforms. I regularly opens the same catalog on Windows and OS X.

• My update of Windows media player in windows vista does not play a mkv file.

  * Original title: about file mkv

  My update of Windows media player in windows vista does not play a mkv file, what do I do

  There are solutions out there, depends on how much you trust the software that you download. Here is an example for Windows 8, could work for vista too - make sure you have a full backup and AV before you start :)

  http://www.AddictiveTips.com/Windows-Tips/how-to-play-MKV-files-in-Windows-Media-Player-in-Windows-8/

• I rented a movie and he will not play in its entirety.  How can I fix it?

  I rented 'The Martian' and it will not play.  How can I solve this problem?

  Have you tried restarting the computer/device you use? If it does not always correctly, contact iTunes Support: http://reportaproblem.apple.com

• Videos with the extension Bup, IFO and VOB do not play

  File extensions

  My videos with the extension Bup, IFO and VOB does not play. Free file I can download for them to work?

  VLC media player. http://www.videolan.org/VLC/ teengeek.freehostingcloud.com

• I 86.5 free concerts and Vista does not level. He tells me I need 7538 MB to upgrade and I have a lot more free?

  I 86.5 free concerts and Vista does not level. He tells me I need 7538 MB to upgrade and I have a lot more free?

  Hi smkymountains,

  What is you receive the exact error message?

  Step 1: You can follow the steps mentioned in the article below

  Error message when you try to upgrade a computer to Windows Vista: "this computer does not have a sufficient space for temporary files.» Error code 0 x 80070103.

  http://support.Microsoft.com/kb/928232

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have Windows Vista and I can not play Age of Empires II. What can I do?

  I have Windows Vista so I can not play AoE2. This is my favorite old game and I want to play again... and he says: 'Age of Empires II has stopped working' and 'a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. Help me!!

  Hello
   
  Put the computer to boot and check if you can play the game:
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
   
   
  Reference: Articles on Age of Empires II
  http://support.Microsoft.com/aoe2kingsfaq
   
   
  I also suggest you get in touch with Age Of Empires Forum which offers the best support.
  http://Forum.AgeCommunity.com/forums/thread/589934.aspx  

• Windows Media Player for Vista, does not play my avi files and says he has a codec error?

  Came across this problem trying to put an AVI in powerpoint presentation for the school. I don't know how this happened or how to fix the error. The error indicates that windows media player is not the right codec to play the video. However, when I sent it myself and opend it upwards on another computer, which doesn't have powerpoint, it plays very well.

  I did some research as to what a codec for windows media player, that's what code and decodes the video compression. However, when I tried to download the appropriate codec file, there is nothing. Not even useful workaround solutions.

  In addition, went and downloaded quicktime and it could not read the video either.

  Any help or ideas would be greatly apreciated. Thank you!

  Hi DaisyReaper,

  Are you able to play .avi files?

  You can use your favorite search engine to download and install the latest codec for Windows Media Player. Subsequently, check if you are able to read .avi files.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  
  Reference: Codecs: frequently asked questions

  Hope the helps of information.

• "Sound does not play well and seems to be cut in videos with windows media player 11

  original title: Windows Vista

  Windows media player 11, I have a problem with the sound. background noises seem ok. the main sounds a mute. You can hear the main people you can hear the background. Please help me solve this problem.

  Hello
  Here are a few steps to try:

  No sound

  If Windows Media Player seems to work fine, but you cannot hear the audio, you will have a problem with your speakers or sound card. Check all audio connections if you are using external speakers and to ensure that sound levels are defined correctly and not cut. Use Device Manager to make sure that your sound card works correctly and is selected as the audio device by default.

  No reading

  A file that simply will not play could be related to DRM - Digital Rights Management - which means that the file is protected by copyright and you do not have permission to read the file. You may need to visit a Web site to purchase a license to play the media. Some files are compressed and require a set-top box, known as a codec, installed on your computer. You can identify the codec required of the file name extension, such as. WAV or. MP3. Once again, you will need to download the appropriate codec so that Windows Media Player can decode the multimedia file.

   

  Verification of the sound settings

  Click on Start , then Control Panel
  Select the material and audio and noise
  Under playback.. What icons you see?
  Click Properties and then click headset/speakers
  According to the levels... is at 100% and not CUT?
  Under Advanced... What is the default format?
  Click test... do you get a sound?

   

  Reinstallation of Windows Media Player

  In the control panel...

  Go to "turn on or off Windows features.
  * Disable features Media: Windows Media Player
  * Reset
  * Provide characteristic Media: Windows Media Player

  hope this helps

  B Eddie

• CD and DVD will not play. I get no error messages or anything like that

  Original title: MY CD AND DVD not PLAY NOT AND there is NO error MESSAGE what IS WRONG.dOES - does anyone know HOW I CAN GET RUNNING AGAIN OR IS MY DVD ROM out of USE. PLS HELP.

  I used my dvd rom for some time.but player when I tried to play a cd or dvd's is not to play or read. He just stopped. Tried to restart and repair, but still the same. Do I have to change my dvd rom. pls help.

  Hello

  ·         You did changes to the computer before the show?

  ·         It happens with all CD/DVD or a specific CD/DVD?

  I suggest to run the fixit provided in the link and check if this can help:

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461