LaserJet 4 Plus: installation of LJ 4 + printer in Windows 10

Similar Questions

• HP laserjet pro m125nw mfp: HP laserjet pro failed installation of m125nw mfp printer

  Hello

  My printer HP laserjet mfp m125nw installation pro is constaintly default. It is 99% (very slow) and ends with a "fatal error". The message is (in Dutch) "of uitvoering van installatiebewerking of easy lang said. you is a fatal care Kon het product niet kan worden used. Start computer opnieuw op... "etc".

  (I'm using the latest version of the driver / full solution: "LJPro_MFP_M125-126_full_solution_15188")

  When you check the logs, I get:

  [23:00:08.2878 2016-05-14] - error - ThreadTimeOut: USBConnectEngine.AbortThreadOnTimeout)
  [23:02:03.4636 2016-05-14] - Info - InstallStatus = FinishedFailError

  Please provide suggestions as how to solve this problem.

  Kind regards

  Jim.

  Hello

  I tried the steps you suggested. However, I was unable to find a node «HP Universal printing...» "in the device manager (I've expanded all nodes).

  And Yes, I'm logged on as administrator.

  Because newspapers suggest that it was a usb problem, I plugged the scanner via wireless network. This solved the installation problem and I can reuse my hp for printing and scanning (via radio).

• LaserJet 4 Plus: can I use my DSL modem/router for my LaserJet 4 Plus a network printer home?

  My LaserJet 4 Plus was connected to my old XP computer with a parallel port cable (?).  Can I make this printer to my Windows 7 and Windows 10 computers using ethernet cable port to connect it to my ADSL modem/router?  I tried to make the connection, but other computers can't 'see '.  This printer has been used as a network printer in an office environment.  I see an IP address when I print a test page, but I am unable to ping this address of my Windows 10 computer when I have the printer connected to my modem/router.  What should I do to make this visible printer?  Is there a way to check the IP address on the test page is still topical to the printer?  Any suggestion would be appreciated.

  Thank you very much to clear up the mystery as to why the reset cold was not change the IP address and why I was not able to see the MIO menu!  Thank you for the suggestion to replace the card with a card HP from ebay.

• Vista and Color Laserjet 5 M reprints all when the printer is turned on?

  Vist and Color Laserjet 5 M reprints all when the printer is turned on?

  It is a new one on me. I installed the printer with a barrette SIMM Postscript so it would work even at all under Vista and now it prints well but insists on the fact that I have all re - print he has never seen a reason any whenever I turn the printer to print something again.

  XP he has never done that, but I've always had the document cannot print the error that I ignored as he did print correctly.

  Google has not really revealed anything?

  ?? Type response level 1 I was looking for... These printers are a full restart, test of memory and when it is off.

  But I think I solved it, spent some time on google and there was a suggestion on the spooler in vista, was something like clear keep printed documents or print spooling first, I went also to start printing after the last page. Who took care of a lot of it somehow. Not sure why the generic installation program would need to be changed here. Possible I did for me somehow when I was trying to get the thing to work with the PCL driver too.

  Then I noticed that whenever I turned on the printer it is printing a page of demo postscript, for some reason any, it is enabled by default in the SIMM option. Turn power off and now its not wasting so much paper now.

  So two things to look for in the computer and the printer.

• Installation Failed for HP Laserjet 1200 Series in the new computer laptop with Windows 8, 64-bit

  Name of the product - HP Laserjet 1200 Series PCL 6 Driver

  Operating system: Windows 8 Home Edition, 64-bit

  Error message: cannot find the series 1200 on the network. To locate manually click ok...

  Changes Made - this is an installation on the new laptop, in Windows 8, 64-bit

  Description:

  1 installation of an existing network, consistedof a desk and two wireless laptops.

  2. the two portable computers have Windows 7, 64 bit. Above the named printer is accessed successfully for laptops.

  3 replaces one of cell phones with 8 64-bit Windows.

  4. the path of the 1200 series is: wireless printer to the router, router to the desktop via ethernet, from desktop to a printer via a cable.

  5. the configuration of the wireless printer is

  Name: HP Laserjet 1200 Series PCL 5

  Port: \\Central\HPLaserj

  Printer: HP Laserjet 1200 Series PCL 5

  Driver: HPMCPM25. GPD 5.8.2008

  Problem

  Impossible to re-create this path with Windows 8, 64-bit configuration.

  a. when I try to download a driver always end up with a file called UPD-pcl6 - x 64 - 5.6.0.14430

  This seems to be a universal PCL 6 printer driver, can successfully decompress the file and create a folder

  b. during installation, I can see the desktop ICON printer (name: \\central\HPLaserj); So far so good

  c. process is unable to locate a driver and ordered to locate manually.

  d. accessing the HP Universal Driver files fails because a driver is not found.

  e. caraa attempt enter fails because you can't enter address above (\\central\HPlaserj). Cannot enter HPLaserj for the address, which obviously does not work.

  f. when the installation showed a list of drivers, the only one that I found was a universal PCL 6, which is what I thought, I tried to download the original.

  This set up has worked successfully to Windows 7 64 bit. It seems that I need help much more expertise to guide me through this whole upward.

  Problem solved.

  This link gives a good overview of the solution

  http://www.sadjad.net/blog/2012/11/28/Windows-8-shared-printer-driver/

• HP LaserJet 1005: driver installation does not work

  Hello

  I have a printer HP LaserJet 1005 of good work and I found and downloaded a driver HP Support page

  "HP LaserJet P1000 P1500 Hostbased Plug-and-Play basic pilot" to W8. I tried to install it but when it arrived

  to the point "Waiting for user to connect the device", he stopped even if I connected the printer.

  Before the installation, I unplugged the printer. I tried to install it from the office too as an administrator

  with the same result. My computer 'sees' the printer, but it does not work without the driver.

  All suggest?

  Hello

  What is your printer model correct and complete on her forehead?

  The HP Laserjet 1005 and the HP Laserjet P1005 (which is the driver you are using) are different models...

  If it's the printer HP Laserjet 1005, know that it is incompatible with Windows 8.1, XP was the last operating system supported:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c03450061

  Shlomi

• Question of LaserJet M1319f MFP Installation on Windows 7

  Dear HP team and community members to support,

  I am currently trying to install HP LaserJet M1319f MFP connected via USB on Lenovo Q190 machine /Intel Core i3 processor / freshly installed running Windows 7 Enterprise 64-bit with Bulgarian language pack, all updates, Microsoft Forefront Protection/i also tried to disable the real-time protection /, UAC disabled, account administrator, IE 11, .NET Framework 4.5.1.

  The priter work properly with Windows XP.

  I downloaded the package of driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=bg&dlc=en&sw_lang=&product=3547...

  After reached installation process 'Copy of the files on the hard disk' stage Setup returns error software install printer no longer works.

  I tried to run with Windows XP SP3 compatibility mode or administrator privileges, but the same error occurs.

  I tried Microsoft Fix It software to install/uninstall drivers too, but without success either.

  I cleaned up the temporary files and Max about 10 to 15 times.

  Windows update is not help with drivers too.

  I tried to extract the Installer files and manually add the printer and received the error that the installation was not successful and it says below the file is not found / if I remember it well.

  After that I tried the HP Print and Scan Doctor software, but it shows that there is no driver installed and redirect me to the driver download page.

  I tried the Assistant driver software also, but it returns that this model is not supported.

  I tried to change the Startup Windows "Selective startup" with "Load Startup items" unchecked and all non-microsoft disabled services, but without success.

  Under safe mode that will not accomplish the install because the print spooler service does not, which is running normally otherwise.

  The "ntprint.inf" file is present in the folder 'Windows\inf', HKLM\SYSTEM\CurrentControlSet\Control\Print\Enviroments\Windows NT x 86 registry has only subkeys drivers and print processors and the HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors registry has only Local Port, Microsoft Shared Fax Monitor, monitor the Standard TCP/IP Port, USB and WSD port subkeys.

  The Windows\System32\spool\PRINTERS and Windows\System32\spool\drivers\W32X86 folders are empty.

  I ran sfc/scannow in cmd with administrator privileges, but there was no violation of integrity.

  I tried to disable the IE component, but no luck either.

  So now I'm out of ideas how to connect that * bleep * thing... I hope someone can help me with this problem.

  "Hewlett PackardHP LaserJet M1319f MFP" currently devices without driver installed in Device Manager /Hardware ID USBPRINT\Hewlett-PackardHP_La28A1 and Hewlett-PackardHP_La28A1/ and Scanning HP /hardware ID USB\VID_03F0 & PID_5817 & REV_0100 & MI_00 and USB\VID_03F0 & PID_5817 & MI_00.

  I forgot to mention that I tried all kinds of variations with these solutions with or without connected printer.

  Thank you very much in advance for all type of guidelines.

  Best regards

  Ivan

  P.S.: at least, I think that I managed to collect all related solutions in this topic...

  Dear Gemini02,

  After a few days of trying different types of solutions, I finally managed to install the printer as a network device.

  So basically, I also had a problem (error 0 x 002) with the installation of the printer as a network printer. Restart the Printer Spooler service has not worked and erase cache files did not work either.

  So I installed x 64 driver on the host machine and then installed the network printer. For those who do not know how to install x 64 drivers:

  -Download the drivers from the official HP support page

  -Check out the *.exe file in a folder (if you don't have additional archiving program replace *.exe with cover and unzip it with the build Manager). Navigate to the folder 'x 64' and extract the file "LJM1319L.cab" to separate the folder.

  -Go to 'Printers and faxes' ("devices and printers" in Windows 7 ")

  -Then right click on the shared printer already and click on 'Properties' ("printer properties" Windows 7 ")

  -Click the 'sharing' tab and click on "additional drivers".

  -Select 'x 64' or only ' IA64"in the case that your hardware architecture is demanding and click 'Apply'.

  If you have already installed the drivers, the rest is not relevant, but if you do not:

  -Open the extracted folder and select the file "HP1319fp.ini" (if it returns select error 'HPM1319.ini')

  -When he asked the second time pilot open 'x 64-> LJM1319L' and select the *.dll file

  -on the third request for drivers go to 'x 64 English-> PrntDriver' and select 'ZSD1319P'.

  I couldn't try to connect and install by USB (the office that I am taking care, as if it were new post more), but after the successful installation of the drivers that the printer connected locally should also work perfectly.

  So I hope I was help someone like me about this and still do not understand why I should have done everything for installation driver simple?

  Best regards

  Ivan

• LaserJet 1200: Laserjet 1200 printer drivers / Windows 10

  Greetings,

  My HP Laserjet 1200 worked properly without any problem when I downloaded and installed Windows 10 (64 bit) in early November 2015.  I upgraded to Windows 7.  16 December 2015, there was an important 10 Windows update that is automatically installed on my system.  The Setup takes about half an hour or more.  After installation and restarting, the printer would not print.  The printer prints a test page if I hit the button on the printer.  However, there seems to be no communication between the computer and the printer.  The Laserjet Printer is a former model of 2002 and is connected via a parallel port.  I tried in vain to install new drivers on the HP site and have exhausted all other troubleshooting provided tools.  I've not seen this issue addressed on the Forum.  It was suggested that we put security update 12/16 may have eliminated the ability to connect via a parallel port.  Any help/suggestions would be appreciated.  Look forward to having to buy a new printer when this one works perfectly well!

  Shortyccg

  With a parallel port, it is a known problem with the latest update of windows 10.  Go to Device Manager and in the tab change the Port settings to "never use an interrupt" to one of the other options.

• HP LaserJet 4 Plus with PostScrip SIMM = LaserJet 4 M Plus?

  I have a printer HP LaserJet 4 Plus old wonderfully connected to a home network Windows XP via a JetDirect card and a Linksys router.  I'm now hoping to enter the 21st century with the purchase of an iMac.  Not wanting to leave a friend behind (the printer, not the router), I installed additional memory and a map SIMM PostScript printer.  So now, have I not a HP LaserJet 4M more and I will have any problems of connection/print worldwide Apple iMac Mountain Lion, using an AirPort base station?

  Thank you

  Old guy from Windows

  No, I won't leave my LaserJet 4 Plus.  OS X Mountain Lion to install the printer as a "Generic PostScript Printer" allowed the addition of a map SIMM PostScript (eBay, $10).  Additional memory was not necessary, but I did add 32 MB to the printer (eBay, $30).  And, after 30 + years (dark) in the BACK/Windows/PC world, I must say that my iMac is a joy to own and use.  I hope I never see another 'window '.

• HP LaserJet Pro CM1415fnw color multifunction does not print PDF files

  I recently met a problem where my HP LaserJet Pro CM1415fnw color multifunction wouldn't print the PDF files.  I tried printing from a snippet, Adobe Reader, Word and PDF Pen Pro and the document will not print.  But the printer had no problem printing other formats like JPG, etc. DOCX from the same computer before and after.

  What has happened is that the computer said he sent the document to the printer and the printer screen showed "Print Document" momentarily - but then the screen of the printer would return to the ready screen and the document will not print.  There are no indications that the printer was having a problem.

  I reinstalled the drivers of HP - no change.

  Finally, I was able to print the document open in Photoshop and save as a JPG file.

  I am running OSX 10.9.2.  on a MacBook Pro.

  When I went to add a printer, the only choice of HP, I got was 'HP LaserJet CM1415fnw @ Mac Book Pro' which is described as a generic PostScript printer.  It did not work when I tried to print a PDF file.

  I then removed the printer and reinstalled it - and I see that in the last step of the installation, I had several choices.  The default choice is the print version of air, I chose the version that showed a printer HP Laserjet series CM1410.

  Problem solved.

• Windows 7 and HP LaserJet 4 Plus

  I have a new laptop with windows 7 and a printer LaserJet 4 Plus old (but very reliable).  I managed to download drivers from the HP site, but it still won't print.  I get no error messages, just nothing happens when I try to print a document or test page.  I have to change something in my settings?

  There are three areas major problems installing a Laserjet 4 in Windows 7:

  • Ports.  The Laserjet 4 and its derivatives have a standard parallel port, but most of the Windows 7 machines no longer have a parallel port.  The most common solution is a USB-parallel conversion cable.  This can be problematic, because many of the converter cables do not support Windows 7.  [Edit - here marked positions have the models of cable converter in the forum users has reported as working in Windows 7]. In addition, most cables have no documentation (or even a brand name) makes it difficult to solve problems.  The converter can provide a parallel port simulated as LPT3: or it may be a port USB001.:  Another option with the Laserjet 4 would be adding a JetDirect card that would provide a network for the Laserjet 4 port.  This will require the Laserjet connected to a router and would provide access network on multiple computers if you wish.  A typical JetDirect card for the Laserjet 4 is shown here.
  • Drivers.  The Laserjet 4 drivers (and 4 M and other derivatives) are sent through Windows Update.  If Windows Update is enabled (as described in the method of step 2 here in the section "configure Windows Update for"...) you may be able to simply plug in the USB cable and install the driver correctly.  If not do the following: click on start Orb, devices and printers, add printer, and then select the appropriate port.  When the list of printers, click Windows Update.  It will take several minutes for the list to repopulate, when it is finished the Laserjet 4 series printer won't be available under HP (Hewlett-Packard).
  

• HP Laserjet 1200 does not print in Windows 7

  I have a HP Laserjet 1200 connected via the USB port of a laptop running Windows 7, 64-bit.  I installed the driver 64-bit windows 7 to the printer through the Windows Update process.  I added it as a local printer as described in this thread.  The driver installs and seems fine.  (The icon of the printer under "Devices and printers" is another printer, but I don't know which is relevant).  When I try to print a test page or any other page, work flashes in the queue of the printer window and disappears quickly, but the page does not print.  I get no error message.  Any suggestions?

  Hello

  I suggest you go through the following link.

  Printer in Windows problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also try downloading the driver from the manufacturer's website, install on your computer.

  You can download the driver from the following link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=29790&prodTypeId=18972&prodSeriesId=29789&swLang=8&TaskID=135&swEnvOID=4063

  You can also refer to:

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

• HP Photosmart Plus B209a-m software printing for Windows 8.1

  I recently bought a HP desktop computer preloaded with Windows 8.1.  My printer is a HP B209a-m, but the installation disk will not install on Windows 8.1.  Is there anyway that I can get an installation disc for my HP printer, which apparently only works with Windows 7 and lower?

  spo_1948,

  Click on the below link which will take you your software products download page then you can select your operating system, this printer support WIndows 8.1 and download and install the software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&JumpID=reg_r1002_usen_c-001_title_r0003&LC=en&product=3777182&

• HP Officejet Pro 8600 e Plus: HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g and instant ink

  Morning

  Does anyone know if the HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g is compatible with the instant the ink program?

  Thank you

  Stuart

  @StuartTunstall

  Welcome to the HP Community Forum - we are a community of fans of HP !

  It seems that your printer is not eligible.

  Connected - HP Instant ink > FAQ > my printer is eligible for the moment ink HP?

  I also checked the datasheet for your printer and did not find any indication of instant support of ink.

  Time for a new printer HP brilliant?

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• HP Laserjet 4050N: old printer - new windows

  I have an old printer (HP Laserjet 4050N) and just got a new office with Windows 10. I have two printers connected to it but the 4050N simply won't talk to her. HP printer and scan doctor told me there is nothing wrong, but no test page will print or it will print from other programs.

  HP Laserjet 4050 n is hooked up through the usb port.  I changed usb ports, changed cables and uninstalled and reinstalled programs from the official site of HP. I bought a USB connector series and still have the same problem. I even swapped the 6 ft USB connection cables between the two printers and the Epson print very well. Whenever I connect the HP, I get a message unknown USB. The printer will print within his own menu, but not from the computer.

  It seems that something in the printer menu may prevent the connection but I don't know what else to do. I connected each port it has to the new computer and still have the same result.

  These days, the best way to hang an old legacy printer is with an EIO network card.  You can buy them for little money on ebay.  You can use 600N, 610N 615N that everything will be cheap.  The card fits into one of the EIO housing at the rear and is very easy to install.  In fact looking at your post again once you have the model 4050N meaning originally, it came with a network card.  If there a just do a google search to configure the card.