LaserJet 4 Plus: LaserJet 4 Plus and Windows 10
Since the installation of 10 Windows, each print job stops with the error. The printer appears as working properly, but doesn't get the data to the machine. I use a parallel port and it worked fine under Windows 7
See my last post in the thread below:
Tags: HP Printers
Similar Questions
-
LaserJet 5 M and Windows 7 64 bit - duplex problem
I have a Laserjet 5 M Postscript with a duplex printing unit in my home network.
Windows 7 64-bit, the duplex printing option is not displayed.
- I reinstalled the driver - cool from MS
- I manually changed the ' properties/device settings' to indicate the duplex unit is "installed". I have administrator privileges.
- I rebooted the machine.
However, under preferences - or for actual printing, under available - possibility of double-sided printing is not displayed.
Any help will be appreciated.
My two machines from Vista (32 & 64 bit), with no problems, print double-sided on it.
Alright George. I have discussed this with my colleuges and we agree that this thread would be better suited in the business forum. Since it is a printer and we focus only on consumption patterns. We would do a disgrace to not send you over there.
Here is a link to Board commercial laserjet.
Business - LaserJet HP Support Forum
Im going to have a moderator hover over this thread to the business section for the best chance to get a solution.
Take care!
Sean -
Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem
I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.
I want to connect the printer via USB only.
I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.
But every time the same problem occurs.
The printer driver is correctly installed, but the printer HP (LEDM) driver failed.
The debugging information:
Installed the device.
hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219
If I want to reinstall the driver again, I received the message:
Setup error
An entry in the Inf file is missing, the file may be Windows 95...
Could you please help me, how to solve this problem?
I need to activate the visual experience of Windows Server 2013, then the USB works
-
Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...
I have a dell inspiron that was originally windows Vista and I changed to windows7. I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.
How and what should I do to get the printer going or to get the computer to recognize. Installation CD will not work and I looked online and downloaded drivers but still the same thing.
Hi LOliver,
Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.
Method 3: Connect the printer to a different USB port and check.
Method 4: Reinstall the USB (Universal Serial Bus) controllers.
First of all, please disconnect all USB devices and then perform the following steps:
(a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.
(b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".
(c) repeat step 2 to uninstall all items under 'USB Bus controllers'.
Then, restart your computer and windows will automatically reinstall all USB controllers.
HP printer drivers- ensure that you download the driver appropriate for your device model package.
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
HP Laserjet P1005 and Windows 7
Hello
I tried to install the drivers for the printer Laserjet P1005 on my Windows 7 PC, but he does not want to install the drivers. This printer is totally incompatible with Windows 7? If so, HP will fix this compatibility issue?
Thank you very much
Hello
Have you tried installing the software by downloading the software complete solution on the web? OR that of built in drivers. Here is the link for the drivers of the complete solution
http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=4062&LC=en&DLC=en&cc=us&product=3435676&lang=en
The link above also has an option to download plug-and-play drivers based on the host. I suggest try this too if the solution does not work. BTW, you see an error during installation?
Thank you
Naveen K
HP Support Engineering Center
Click on the yellow button of KUDOS to say thank you
(Although employed by HP, I'm trying to solve problems with my will and my employer bears no responsibility for my answers)
-
Driver for HP LaserJet M1005 MFP for Windows 7
Could not find driver for HP LaserJet M1005 MFP for Windows 7 please help soon
This product is supported by a plug-and-play printing and scanning to the driver which can be found here:
-
HP LaserJet 5000 support in Windows 7 64 bit
I recently bought a Dell laptop which has MS Windows 7 64-bit OS and I have an old Dell Desktop 4400 w/Windows XP I have a HP Laserjet 5000 printer is connected to the LPT1 Port. I have the shared printer, and I can connect with my other laptop that has the MS Vista operating system. I can't get my laptop which has Windows 7 connect and I have tried everything I can think. I connected to my laptop with Windows 7 and downloaded the latest driver on the HP Web Site. The drivers for the LJ5000 are called universal drivers. The drivers are installed on my W7 system and then I'll start/devices and printers and "Add a printer" option. I select the 'look' in the network option and Windows looking for the shared Prnter and considers it. I select the printer and it starts looking for the driver. I think he's looking on the computer where the printer is connect anyway, it cannot find the driver. I get a dialog box that says it cannot find and gives me the ability to navigate. I then go to the universal driver I downloaded for HP5000 and I'm going to the folder that contains the files ".inf". The program tells me it can't find the driver for HP5000. What I am doing wrong? Windows 7 supports the HP Laserjet 5000 printer. I hope of course because I can afford to buy a new 11 "x 17" printer. " There, can someone help me? Thank you.
Try the following: on the Windows 7 machine go devices and printers folder, add a printer, a local printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, then click Windows Update, and then select the appropriate driver.
-
printer Laserjet 1020 upgraded to windows 8.1 will not print PC HP Envy H8-1503
Hello
was wondering if anyone has problems printing of victory 8.1, used doctor HP printing and scanning and said everything's fine but a test page does not print as I can't print anything from another category windows 8.1. using windows 8 that I had no problem printing, I've updated all the drivers
Also when I connect my laptop using windows 7 it prints, and with them turn off the printer laserjet 1020, then plug in the USB cable and windows 8.1 it will be printed.
But when I turn off the 1020 laser jet, then turn it back on then try to print windows 8.1 that it will NOT print
Thanks Mike
Hello
I understand that you can not print with Win 8.1.
Drivers for win 8 and 8.1 Win are the two Version 9.
Make sure that you uninstall the previous printer software.Here is a url to completely uninstall a printer in Win8.
http://www.YouTube.com/watch?v=-M0GVVcwT-oRestart the computer.
Reinstall the software of the printer again. Select full features software driver.
If you need more simply make assistance let me know.
-
Sansa clip plus and itunes - how to transfer files
I'm really ignorant, but I would be very grateful for the help. I did research on this topic here but do not understand the answers...
Basically, I use itunes on Windows XP. I just boughts liked a Sansa clip.
I don't know even what kind of files I have in itunes - they are mostly ripped a CD. I guess they were mp3s but looking at recent postings here it looks like they may be something else (ACC file extensions?). Anyway, I was fiddling around in itunes but have not been able to verify what are the types of files ('cos I'm ignoring it!)
Earlier today I just copied some of the songs in itunes, go to Windows Explorer and paste in the section music to the Sansa Clip file. They played very well...
Then I went and deleted these files on the Sansa Clip Plus, because they were just an experiment.
Then I went back to itunes and copied the files over. This time, when I went to paste the files in Sansa Clip Plus in Windows Explorer, I found the option to paste is grayed out.
I'm stuck and would be incredibly grateful for the help. As you can from it of the mess that the above, any guidance I get has to be pretty basic.
the easiest way is just to look at the files in windows Explorer. go to documents, then music. the music folder to itunes folder. That's where itunes stores all the files. you need to configure the computer to display file extensions for known file types. Find your MP3 files and copy them from windows Explorer, then glue them to the clamp.
-
Where can I get driver of scan on my Laserjet multifunction M1120n for Windows 7?
Where can I get driver of scan on my Laserjet multifunction M1120n for Windows 7 64 bit? It must be the driver of Windows 7 Scanto.msi. Thank you for your support.
Hello
Unfortunately all HP software component (HP, HP Scan tool box, etc.) for this product support 32-bit envoirnment only.
As you can find it in the User Guide, only basic drivers printing and scanning provided for 64-bit (Page 14):
http://h10032.www1.HP.com/CTG/manual/c01072750.PDF
Kind regards
Shlomi
-
I have trouble to install the printer HP laserjet P2055 on my Windows 7 HP pavilion
I have trouble to install the printer HP laserjet P2055 on my windows 7 HP pavilion
original title: installation problemLocal printers
To install a printer, the most common method is to connect directly to your computer. This is known as a local printer.
If your printer is a universal serial (USB) bus model, Windows should automatically detect and install it when you plug it in.
If it is an older model that connects using the serial or parallel, you may need to install manually.
To install the printer (add) a localClick to open devices and printers.
Click Add a printer.
In the Add Printer Wizard, click Add a local printer.
Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.
On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.
If your printer is not listed, click Windows Update, and then wait while Windows searches for drivers additional.
If none is available and you have the installation CD, click disk, and then navigate to the folder where the printer driver. (For additional guidance, see the printer manual.)
Perform the steps in the wizard and then click Finish.
Tips
You can print a test page to make sure that the printer is working correctly. See print a test page.
If you have installed the printer, but it does not work, check the Web site of the manufacturer for troubleshooting driver or updated information.
My printer does not print.
It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.
First of all, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions.
Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.
Open the printer Troubleshooter
Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.
For more information, visit the below mentioned link:
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Printer problems:
http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx
Run the printer difficulty of:
http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT
You can see the below mentioned links.
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer
Then, try to update the printer driver on your computer. Sometimes printer problems come from out-of-date driver software, and can be solved by installing or reinstalling, the latest driver.
To find the latest driver for your printer, first check Windows Update, which is designed to detect the hardware connected to your computer and automatically notify you when new drivers are available:
Click to open Windows Update.
In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer.
If updates are found, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
If you do not see a listed updated printer driver, it is always possible that there are: your printer manufacturer might not have provided to Microsoft yet.
Most printer manufacturers offer updated drivers on the sections of the support of their Web sites. Drivers are typically organized by edition and Windows printing model. When you have found the right driver, install it according to the instructions of the manufacturer. For more information, see update a hardware driver that is not working properly.
If your printer still does not work, see the support section of the website of the manufacturer of your printer for model-specific troubleshooting tips.
-
Where can I find addons of Tab Mix Plus and Adblock Plus _signed_?
Where can I find addons of Tab Mix Plus and Adblock Plus _signed_?
-
a few addons which works perfectly with firefox android is more work. They appear on my list, but now fail to do what they should (block ads and followed). Adblock Plus and ghostery are two examples. I expressly avoid Chrome for android due to the inability to add these addons. I use firefox android specifically because I COULD use these addons. Is - this inetnt of Mozilla to not allow these addons in the future? If yes I Fortunately it will delete and move in a direction different browser. Thank you.
Is - this inetnt of Mozilla to not allow these addons in the future?
The two extensions work fine here.
Try to re - install the two extensions. -
Today, I installed serif photo plus, and got the crazy computer, I uninstalled this program but I can't delete the photo over the toolbar, how to do?
Thank you, but I had to go to safe mode and to the restoration of the PC, but it has been resolved
-
Ink cartridge Laserjet M1212nf MFP and I get error message "install black cartridge.
I have installed and reinstalled the ink cartridge black for my Laserjet M1212nf MFP and I get error message "install the black print cartridge. I pointed out quite in the restart including manual online, the fact to unplug printer, etc..
Help, please.
This error of "Install black cartridge" is usually caused by a piece of packaging material that remains on the cartridge. The document below should help you to solve the problem. If this does not work, try to do a hard reset. If neither works, let me know.
Toner blinking or 'Install black print cartridge' Message is displayed on the control panel:
http://goo.GL/NlqpgTo do a hard reset:
1. make sure that the printer is turned on.
2. pull on the power cord from the printer.
3. pull out the power cord from the wall.
4. wait for 30 seconds.
5. plug in the printer and turn it on.
Maybe you are looking for
-
See the plot calculated first then real field of output table
I am creating a vi that allows the user to adjust the values to create a ramp and display it on a graph. Then when the user presses a button to start actual production is displayed on top of the calculated curve. Eventually the user will be able to
-
This system has a card mother Pegatron model IPIEL-A3 (Eureka 3) version 1.02. BIOS is 5.09 FRIEND 19/08/2009. I have not been able to find an option in the BIOS to boot from a USB key. Must be updated to BIOS? If Yes, who updated and where I find
-
Messaging Instant Lync can be used with the Hosted Exchange mail server?
Messaging Instant Lync can be used with the Hosted Exchange mail server? Let me rephrase the question. As everyone knows already Lync messenger is used with Office 365, but can be used with the same way hosted exchange server, it is used with Office
-
Outlook Express for Windows XP
I need help to get started with setting up my email if Outlook Express for Windows XP.
-
Link Web for BlackBerry Java 6.0 and 5 SDK
Hi, I want to ask on the link for JRE 6 SDK Update. I just downloaded the plugin Eclipse for Blackberry here: https://developer.BlackBerry.com/Java/download/Eclipse/ Eclipse, I'm here now don't have JRE 7.1.0 But the examples I've had to learn java r