LaserJet 4000: HP LaserJet 4000 web interface problems

I have an HP LaserJet 4000 very old but still very functional.  When I try remotely inside through the web interface to change settings, the screen does not load correctly.

It wants to load a JAVA runtime and I have the latest version of loaded oracle, but there must be an incompatibility.  I think that it only works with a very old runtime.  I have tried with different browsers such as firefox and chrome, but the result is much the same.

Y at - it solution or a firmware update or something to fix this?

You have the 600n jet direct card and the issues are known.  I think that windows 95 was the last os that could communicate and give you the web page.  You could try to download the latest firmware for your jet direct card and update its firmware using hp download managere, but to be honest I don't think it will work.  The saving grace is that you can make any changes you want in the control panel of the printer.  Just navigate the EIO menu on the printer and go through the menus.  A little more difficult, but it can be done.  Good luck.

Tags: HP Printers

Similar Questions

  • The switch Catalyst 3560 G Web Interface problem

    Hello

    I have a problem with my switch to Cisco Catalyst 3560 G. The web interface does not work (I tried IE11, IE6, Chrome, Firefox, and Safari).

    There is only displayed icons but no text:

    To try to solve the problem, I have updated the switch to its latest version of IOS (from 12.2 (55) to 12.2 SE7 (55) SE9). But the problem persists

    WS-C3560G-48TS 12.2 SE9 (55) C3560-IPBASEK9-M

    In the configuration, the web server is enabled:
    IP http server
    IP http secure server

    What can I do?

    Thank you

    Best regards
    Fabien

    Hello Fabien,

    I think I found the problem and a workaround for this.

    The problem comes from the language of the webbrowser.

    I got exactly the same problem with the same model with the same version of IOS.

    I checked with the debugging tools in firefox and I find the browser want to get (firefox in french for my case) 2 scripts:

    http:///fr/charset.js

    http:///fr/re_preflight.js

    But there isn't any record of en flash: / C3560...

    So I changed the preferred language in firefox (put English first). Reload the Web page and it works very well ;)

    I hope this will help you

    Thank you

    Jeremy

  • Removal of password HP Laserjet CP3525 Web interface.

    Hi all

    I have a CP3525 have the admin password is defined but forgotten. Does anyone know how to remove it. A hard reset is also very good. I get lost a bit in the overkill manual placed on the HP website.

    It is 100% similar to this topic:

    http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/LaserJet-color-CP3525-security-reset/m...

    Thanks for reading,

    Drunks

    See attachment.  Use an atheist THAT NVRAM reset

  • SLM2048 web interface with firefox 4.0 problem

    Updated Firefox 3.6 to 4.0 and now the slm2048 (firmware 2.0.0.8 & boot 1.0.1) web interface problems. I get the following error message:

    error in Pager.SetpagerHTML String contains an invalid character.

    Specifically, the problem is hyperlink to other ports in the switch port settings is missing. I tried 10 Chrome and IE 8 and the two have even worse problems.

    Someone at - it one reasonable alternative to that roll back to Firefox 3.6?

    David,


    Actually the GUI for the slm2048 is designed to work with Internet Explorer 5 to 7 and firefox is a little maybe on the GUI.  However, you can use the IEtab 2 addon for firefox.


    Once installed, you will see an emplem of firefox in the lower right of the Web page.  From there, click on the emblem of firefox and it will turn into an emblem of the internet Explorer.


    Now you will be emulating explore a Web page in firefox and should not have problems with the GUI.

  • WRT54G V3.0 Web Interface broken after FW update

    I meet the same web interface problem after I updated the firmware, like in the case below, but with my v3.0 WRT54G. The firmware file I upgraded to was WRT54GV4.0_4.21.1_US_code.bin. Will provide you with instructions and decommissioning file name so that I can use the web interface again? I did the steps of resetting, tried a different PC, but get the same problem of web interface. Thanks in advance.

    WRT160nV2 Web Interface broken after FW update. Registration date: 21/05/2009

    Yoohoo!

    Now I know why you have this nickname. Thanks for your help. Problem solved. Web interface works again.

    Must have been the tftp download from the link you provided because I used the same firmware upgrade (WRT54GV4.0_4.21.1_US_code.bin) file I downloaded and tried to install previously.

  • LaserJet P1102w: History of how many pages each toner printed in web interface?

    Is it possible to find in the web interface for the printer, a story of when a new toner has been inserted, and how many pages it had printed upward? I know how to access this story, but from what I can tell, it only shows the current number of toner and the page.


    HP LaserJet p1102w

    Hi @paulri,

    I understand that you want to know the history of how many pages have been printed of each toner. I'd love to help you.

    You can print a Configuration report to get the total number of pages printed from the printer, but not individual toners.

    Printing a Configuration Page. Select the method two.

    Feel free to click on the button under the thumbs up if it helps.

    Good day!
    Thank you.

  • LaserJet 500 color MFP M575: Reset forgotten password admin on web interface

    Greetings.

    I forgot the administrative password to log on the web interface.

    How can I get it back?

    Thanks in advance.

    If the password is lost, then you must reset the unit. Start with the normal restore to default settings of the control panel option.  If it does not then seek the cold steps or reset NVRAM and reset at this level then.  If an item is not already circulating with the steps, then you will find them in the maintenance manual.

  • LaserJet Pro M225dw MFP: Problems of scan to network folder

    Hello.

    I set up a portable computer with the printer mentioned above. No problem printing and no problem to set up Scan to network on the web interface folder (ran test and got the result OK) but there are issues when scanning in fact the printer. I put it in a document to scan in the top loader, select scan, scan to network folder, your computer (or rather folder name) and click Scan. The printer draws the paper and then started working. A pdf document will appear in the folder, the printer is how ever is already done. He keeps grinding on it for a while and then the signals being completed. At this moment, the pdf file disappears from the record.

    What could cause that?

    Hi @M3rLiN_74,

    Welcome to the HP Forums!

    I noticed your post about how you cannot scan your network with your HP LaserJet Pro MFP M225dw 10 pro Windows folder. And I'm happy to see it for you!

    This could be a problem with the charger of the printer, or perhaps a connection software / junk the computer. What happens if you try to scan to network folder using the glass of the scanner of the printer? Are you able to scan from the computer by using the top of the charger page? Scanning the computer (Windows).

    For the moment, please try our HP print and Scan Doctorand let me know what happens!

    If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

    I hope hear from you soon!

  • HP LaserJet M125nw: HP LaserJet M125nw - EPrint connection problem

    Hello. 3 days ago, I bought a HP laserjet m125nw. Printer is very good! It has good scan and it prints fine. Drivers installation is very easy and fast. But my problem is in eprint. To connect the printer to the web, I use lan. I wanted to turn on web services, so I enabled. After that, he wrote: "in a few seconds, wil print info important"(ou autre chose, mais je ne me souviens pas cela), but it doesn't have to print this information. "» My OS is Windows 7 64 bit. I've changed a lot of parameters and is true that I can make a mistake so their list is broken:

    I tried to restore my router for the settings default = didn t help

    I set up a static IP = did not help

    I downloaded and installed new drivers = did not help

    I have configured the servers DNS = did not help

    You know, how I can solve it? Thank you

    And please excuse my bad English!

    Hi @ADBraun,

    Networking and Web services problems like that can be very fickle. I can't think of any other measure to try other than what I suggested.

    I recommend that you only call our Cloud Services to 855-785-2777. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    Good luck

  • Problem with IP LRT224 web interface

    I have my LRT224 put in place about a week ago. It works very well for a while, but right now I can only access the web interface through the first LAN. If I use any other LAN and type the IP Address of the gateway on my browser as 10.6.21.1, the address bar will change to 'https://[::ffff:a06:1501]/' instead, and it displays the page Web is not available.

    I don't know in the parameter 'Port management'-> '802. 1 q"all my Device Management are enabled.

    Anyone know what's the problem?

    I found something, when enable https and IPV6, this problem occurs.

  • Problems with the web interface of connection vcenter 5.1

    Guys,

    What don't understand me, I've set up a new virtual appliance version of vcenter test 5.1, I can connect just fine using vsphere client and console, but the web interface refuses to agree with the same identifiers. What is happening with this single sign? I really do not understand.

    You guys could help me please?

    I stumbled upon this same question.  5.1 with the search service is completely different than 5.0, this is why the others are not working.

    Here's what I did to solve the problem.  I turned on the regeneration of SSL certificate:

    1. Navigate to https://[IP]: 5480 and connect
    2. Go to the Admin tab and press the button "Toggle the setting of certification" until activated regeneration 'certificate' displays Yes
    3. Go to the network tab and change the host name.  This will trigger a regeneration of SSL (or you can change the ip address).  I don't know if change 'localhost' to something else helped, but it can't hurt.
    4. Restart the box (restart System tab button.)

    At this point, you can look at the start-up of the machine of vcenter console messages.  You will notice some messages about detection of a new hostname or IP and regenerate a new certificate.  You will see all the services to import it again SSL ceritifcates so.

    At the end of the reset, I was able to connect to the web client to vCenter!

    HTH

  • GS752TP - Slow Web Interface

    Does anyone else have this problem? The web interface is so slow to become almost unusable. It loads the background then hangs just for a good 20-30 seconds. Sometimes, it loads the buttons... sometimes it is just with a white background. When I get to enter the interface by clicking on a button sometimes loads data... sometimes it is just there and I have to close the browser and start over? Someone at - it suggestions? It runs later (and also the initial firmware).

    -Eric

    I had this same problem for a while.

    As a "fix"------"Workaround"------"bodge" I used the Portable Firefox 3.5.6 put up-to-date of changes to VLAN\LAG settings.

    Really, it's not perfect, but works.

    /Pokes Netgear with a big pointy stick!

  • jumble of text in the web interface after Web Services update / firmware

    I received a message on the screen of my Officejet 6700:

    Update recommended

    An update is available for Web Services (ePrint and Apps).

    Do you want?

    I chose to update now and it installed fine, or so I thought.

    I checked the web interface of the printer, and there is a bunch of text confused, as the code is messed up for the web server.

    I had just finished to check the status of your ink cartridges (and subsequently replaced a), so I have the fully functional Web page fortunately still open on another machine, so I can tell exactly what is forward - after on this page.

    On the tools > gauge of ink page, on the right page (old) the said table (title, first line, first column):

    Cartridges installed

    Color | Magenta | Cyan | Yellow | Black

    Part number

    Type

    End of warranty date (A-M-J)

    First Installation Date (A-M-J)

    Area of ink

    USE

    HP

    But after the software update, it says this:

    Print the self-test Page

    L@S#0456 | Number of recorded events. L@S#0462 | L@S#0552 | L@S#0450

    Use of the accumulated media

    Date

    L@S#0477

    L@S#0561

    L@S#3345

    In addition, the order "supplies" link, with a contextual text of "print order supply."

    now, says "Cartridge", with a contextual text ' block unwanted faxes '

    And "Print Printer Status Report" now says "L@S#2567".

    I went to the support section and found an update firmware, but during download and execution, after you find the printer, he says that he is already up to date and leaves me not choosing to try and reapply the update of the firmware (as is obviously what is happening through the touchscreen menu has already done).

    Should I just restore to factory settings? I think that firmware would not be changed by doing this. It is not an older version of the firmware available on the product support page, to return to an earlier version.

    Via the screen menu touch printer, a Printer Status Report print indicates the firmware version is MPM3CN1322DR.

    How to force a reinstallation of the firmware, or let them difficulty firmware which was released on 25-06 - 2013?

    I've been using Google Chrome and even had 2 tabs open in the same window, one from before the update and the second I opened after the update, so this was not a factor.

    I had not revisited the web interface of the printer to date, and currently, I see that the problem has disappeared!
    The version of the firmware has not changed, and I did no manipulation of the printer. I also highly doubt that the main user has nothing, because it is not tech savvy. So, the problem seems to have corrected itself.

    The only thing I see now, that I did not notice before, is that there is a version of firmware fix, but it currently says 0. I don't know what it was before, but I guess zero means that there is a patch, so the firmware didn't automatically update in order to make the problem disappears.

    Problem disappeared, but I don't know how or why. I haven't decided if I will update the second printer that is the same model.

  • Integrate the ICB with web interface

    Hi all

    We already have a CVI writes to order any of our instruments. We must develop a web interface to pass parameters to the CVI. In addition, currently the data is generated by the BCI as .csv files. What more we need to do is to transfer the data to a database as well. I did some research and discovered that Measurement Studio provides a .NET environment to control instruments. In addition, I think that the CVI/SQL Toolbox should be able to solve my problem of database. My question is who will Measurement Studio I want to integrate the CVI already present and communicate with him using a web interface? If so, what me does establish this communication?

    Thank you

    Kanu

    Kanu,

    Unfortunately, there is no easy or good way to create a web interface with CVI directly.  You can do this in Visual Studio with Measurement Studio, but you will at least need to the professional edition to do because you want to use web forms.  There are some resources with more information on the web forms, including this Walkthrough.

    Since you already have an investment in CVI, I don't understand why you don't want to throw just as work on.  According to the works of your code, you have a few options on how you try to bring together these two languages.  You can try to make your C code in a DLL and call it in the .NET application, as in this discussion of the call to invoke from managed code.  However, a better solution would probably be to use Of network Variables to communicate between the two programs.  Then, you can limit the .NET application to be mostly just a control interface that writes to the network variables, which are then used in the CVI program that you've already written.

    Hope this helps,

    Jen W

    Technical sales engineer

    National Instruments

    NI.com/support

  • SRW2016 Web Interface after Firmware Update error

    I have a new SRW2016 and after updating from 1.2.1 to 1.2.2 firmware I get an error trying to connect.  I use Firefox with IETab and the error message is:

    ... An error has occurred.

    ... You want to debug?

    ... Line 11

    ... Error: "tBodies' is null or not an object

    I tried to use Internet Explorer, but the status bar displays "error on page".

    I * really * need help!  Any ideas?

    BTW, I got the update of the firmware twice.  The first time was

    minutes and finally he stopped (I don't remember if there was a mistake

    message).  The second update seemed ends without problems.

    TIA

    Well, I was about to do the update with hypertermial/xmodem, when I thought I should check the browser interface.  And now, it's working now (even if it's really slow).

    He had to because of my recent update to Firefox v2 to v3, as well as the updated IE Tab addon.

    I hope that the web interface used the HTML standards and not require IE. It's very frustrating.

Maybe you are looking for