LaserJet 49.2fcc error 5550tn

What I know about this error, it may be a few things... card network, trainer or firmware. Have deleted the printer on the network, and ran a paper path test just to put something in the machine. Prints out just completely scrambled, empty or partial. Then removed the network card and get the same kind of prints. IM leaning towards a Board of trainer, but be as I really didn't deal with this error before, are looking for other entries. Any help would be greatly appreciated. An example of the impression I get is attached.

Replace the trainer worked.

Tags: HP Printers

Similar Questions

  • HP laserjet 2055dn B0605 error

    HP laserjet 2055dn B0605 error, I need solutions for this error I tried with the site, but it does not work.

    @Abhitech,

    Please refer to this document to help troubleshoot the problem you on the error message with this printer...

    HP LaserJet P2050 Printer Series - error B0601, B0602, B0603, B0604 or B0605 POPs during initialization of the printer

  • LaserJet M1132 MFP: Error E3 on M1132 MFP

    Hello

    Please help, I get the error E3 despite the fact that I've changed the cartridge, made sure that all packages are cleaner, cleaned the iner part of paper, disconnected and reconnected several times.

    is there a way to reset?

    Thank you

    I beg of you. Where E3 is an indication of a paper jam (could make sense given the noises your description), try the procedure described here: remove a paper jam for HP LaserJet Pro M1130 and LaserJet Pro M1210 Multifunction Printer Series.

    If the problem persist, it would be better for you to call us.

    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number

    File number and phone number are displayed.

  • LaserJet 3020 upgrade error

    My Laserjet 3020 does not at all. A message is displayed on Didital sign indicating "UPGRADE ERROR, CALL HP HELP DESK".

    Please advice how ractify it.

    Alharamain wrote:

    I don't have. Since I do not know any number of support HP in Karachi centre.

    Try this:
    http://www.romakhi.com/

    Computers of Roma was created in 1988 and 20 years computer Roma has itself in magnates Macho in World.Roma a computer is authorized dealer of Hewlett Packard (H.P.).

    http://www.romakhi.com/contactus.html

  • LASERJET 1300: fatal error in laserjet 1300

    I bought a 'new' in the Laserjet 1300 to a thrift store box when I turn it on it shows "ready" light, works, all gears seem to be turning, doing this for about 1 minute, then stops and shows fatal error, turn off and turn back on, same thing, any help?  error fatal high school talking about the engine, the engine turns during the minute before the error.

    This is the engine error but it could be the motherboard, but all first I remove the cover and make sure that the Ribbon connector going to the laser/scanner Assembly is in place.  I know that the laser/scanner cable can give the defective engine error.  You will also want to check the other wire that goes to the laser/scanner Assembly to ensure that it is correctly connected at both ends.  It is also possible that the formatter is bad.

  • LaserJet MFP M127 Pro: LaserJet MFP M127 error message and don't scan Pro

    Relatively new LaserJet M127 gives me a "charging document" error message when you try to copy something that is clearly on the glass.  I tried to scan a document and it also gave me a message to load paper when I already had a loaded document.  It is fine impression of the MacBook, but will not copy.  He stopped abruptly.  I copied it several times before.  Any suggestions?

    Thank YOU, rb011... it worked.

  • LaserJet P2055dn Setup error

    When installing, I get the error message stating:

    "This software cannot be installed using the command" run as... " ». The installation cannot continue until this is resolved. »

    I am the only administrator of the computer and the only other account. I would like to set up the printer via a network connection. Thank you very much for the help.

    WIV,

    I don't know what process the OS you use so I tried installing on a 64-bit win7. When I downloaded the software of complete solution by default it when right on a Setup screen where I can choose the easy installation or advance of Setup options. I chose the installation easy and let it run and install as usual. If you encounter another, could you explain further, and I will try to help you through it.

    I have you linked to some documents that could be useful and a few screenshots that should help you through this. I also gave you the link to the page of the product that has the driver of the complete solution. You will want to choose the HP LaserJet P2050 post-Euro PCL6 Default Install.

    2055 d Page product - choose this option: HP LaserJet P2050 post-Euro PCL6 Default Install

    Install a driver full features or complete solution on a Windows 7 OS (32-bit and 64-bit) using a USB

    Install a driver full features or the complete solution on a Windows 7 OS (32-bit and 64-bit) through a network

    If you still need help, please post here and let me know what your specific problem.

    Thank you.

  • When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

    Original title: HP Laserjet 1300 Windows XP, SP3 error installation

    When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

    CANNOT INSTALL THIS HARDWARE

    There was a problem installing this hardware

    HP Laserjet 1300 PCL 6

    An error occurred during the installation of the device.

    The specified Module could not be found.

    I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

    Hello

    You are able to install other programs?

     

    Method 1: See the following article:

     

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

     

    Method 2: view the following steps and see if that helps.

    (a) disconnect the printer

    (b) uninstall the software and drivers on the computer

    (c) plug the printer back

    (d) allow the Hardware Wizard search for drivers

    e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.

  • Color LASERJET CP1025nw - Fuser error

    I get a 'Fixer' error when I print on my printer Laserjet CP1025nw.  I have powerd extinguish by instructions and left HP it goes off and unplugged during the minutes 25 + recommended, but nothing works.  There is a triangle with one! the control panel and I'm sure that has to go.

    Any thoughts?

    Thank you!!! \

    Steveoh

    I found the solution on another forum HP.  The guy said to replace the black toner cartridge and it worked!  He said that it had removed all the toner cartridges and put them back in, but no luck.  Changing the black cartridge has worked for me and him!  My printer is less than a year and I have probably put 2 reams of paper through it, so I'm happy that it worked!

    steveoh

  • Series HP laserjet 4050 N PCL5: laserjet "in an error state.

    I don't know if mine is a product of the company. I have not used the networking with him.

    Recently, when I try to print a document, I get the message "error on HP LaserJet printing" or "printer is in an error state." The printer prints a page of configuration but does not print any document or test page.

    This started when I tried to print an email with something like a password (in fact my Akismet API key) and got the error message, "unable to print"Print"  (I had clicked on a hilighted (blue) 'Print' link.

    Several jumpers did not work except for informing me that there may be a problem with my printer. "I tried to reset with the buttons on the printer: have reset the memory, restore factory settings and 'reset' I / 0 channels" (whatever that means).

    A convenience store said that there is no problem with the drivers or the coils. I updated my driver and did a system restore to a time before the problem. After my "System Restore", I tried to uninstall and reinstall the printer. Nothing has worked.

    Perhaps I should add that recently, I uninstalled and reinstalled my printer for a second time, and he presents himself as "copy 1".

    The only thing I can think I can try easily changes the camera via my computer settings. The air settings either good or a little confused, but in theory, I could try at least temporarily by turning the "automatic configuration" to, etc. But I am a little doubtful it before some tips.

    Any ideas? I miss my beloved, for a long time, already excellent printer.

    If the printer is connected with a parallel cable to the printer to the computer, this is a known issue.  See the link below for the solution.

    http://h30434.www3.HP.com/T5/LaserJet-printing/printer-in-error-status/m-p/5402232#M270467

  • LaserJet 4100N: Laserjet 4100N syntax error

    Until yesterday my Laserjet 4100N was printing fine on my 64-bit Windows 8.1 office. Today, it prints a number of pages that are empty or with an error message like "Syntaxerror."... The offending command:.  fl  (  ... Operand Stack: 85 "or an empty string of similar meaning. Sometimes a part of requested printing come there, too, but often not.

    I have tried rebooting the desktop computer and printer many times - no change.

    I tried to uninstall the printer and reinstall via Windows - no change.

    I tried to download and install the HP Universal print driver each available in three versions:

    PostScript December 11, 2014 - no change

    PCL 6 - Donna PCL XL Error

    PCL 5 - does not print the document requested

    Help, please!

    Could be a fault of the driver, or intermittent corruption by the hardware, or (as explained in http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/M175Nw-PCL-XL-errors/m-p/4940252 ) the result of a recent update for AVG anti-virus (which seems to have corrupted the output of different drivers, generating many XL PCL or PostScript errors or otherwise just to print (depends on the Language of Description of Page / driver is currently in use)).

  • LaserJet M1536 ToolboxFX error

    HP LaserJet M1536dnf MFP C24F1A.  I have a new Dell inspiron N7110 computer Windows 7-64 bit.  Switch from a USB connection to a wired (Ethernet network connection).  Everything works including network, printing, scan etc, except that I can't get my HP ToolboxFX to work.  I get an error message-

    "HP ToolboxFX has encountered an error and can not recover"

    "Restart the Toolbox tools or re - boot your PC, you will not be able to receive the alert message or use other features of ToolboxFX until it has been restarted."

    Windows version Win32NT - 6.1.7601.65536

    HP ToolboxFX version 006.015.01163

    I had this message until I changed my Ethernet connection but I would just restart and it works.  Nowi tried both restart the box tool and restart my PC and it does not work.  Any ideas? Is this a windows problem? Help, please.

    Hi Maddie54,

    Try follow it and see if it works for you.

    • Please go to the following C:\ProgramData\Hewlett-Packard\ToolboxFX\Settings directory
    • In this directory, remove all files in the folder settings.
    • Restart the pc and restart the printer.

    * This can happen when the IP address has changed or the printer had lost communication and been re-connected.

  • color laserjet MFP M177: error message when you try to print

    Hello

    I have a HP Color laserjet MFP M177.  I can't print I get an error message on my computer screen. No messeage shows up on the printer.  I have recently upgraded to windows 10 (I do not know what version) If this could have something to do with it?

    Help, please

    Thank you

    Hi @Daisy001,

    Welcome to the Forums of HP Support! I see by your post that you can't print, since the upgrade to Windows 10. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    If you have not completely uninstall and reinstall the driver, I would say to start it there first. Here is the link to the latest drivers: Color_LJPro_MFP_M177_full - solution_15188.exe

    If the problem persists, you can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

    Please let me know the results and if there is anything else I can help you. Thank you.

  • HP laserjet pro 1536dnf: Error 49 turn

    We are ussing two different HP Laserjet Pro 1536 DNF at two different place and both are connecting over the network. Yesterday sudenly received the same error error at the two printer (error 49 turn market) Please suggest what to do now, as the two user loaction are unable to use printers

    >... updated the Firmware of the AIO Printer HP laserjet 1536dnf printer. Now deleted error and the printer doesn't work...

    No doubt which implies that some print jobs or discovery was originally the firmware fails, and the new firmware can manage correctly the content of these jobs.

  • LaserJet 100 MP175nw: Error 49

    I recently changed my Airport Time Capsule (newer model) and changed the name of my network. Now, I'm trying to print from my MacPro and the printer gives me an error 49 non-stop. I checked the responses in the communities of HP forum and none seem to work. I even tried to apdate the firmware through Windows 8.1 (running on my MacPro by Fusion) and I can't always help. Help, please.

    Hello @ljpell,

    Welcome to the Forums of HP Support!

    I understand that since the update of your airport Time Capsule and change the SSID of your network, your HP LaserJet Pro 100 color MFP M175nw is in an error state 'error 49'. I would like to help you today to solve this error state. Thanks for the troubleshooting steps you have already tried before reaching out for support, including. Now, just so that you know, 49 error messages can occur because if a conflict with the configuration of printers and the environment, or a problem with the copy or scan commands sent by the computer (Source). Because the 49 error message appeared after changing the name of your network and your airport Time Capsule update, I believe that the error message 49 on your printer is due to a conflict within the configuration of printers (environment). Therefore, I will pass you some troubleshooting steps to reconfigure the network connection on your device in order to have a nice clean slate to work with. Please follow the steps below.

    Step 1: Restore default network:

    1. Turn your printer OFF
    2. Please disconnect the power supply for your Time Capsule airport
    3. With the power cord unplugged, please turn ON your printer
    4. Your printer "should" come "ready" mode
    5. Press Setup (the key) on the front panel of your printer
    6. Arrow in the network Setup Menu on the right and click OK
    7. To restore the default settings right arrow
    8. Select OK to restore default values
    9. Once the default network settings have been restored, please reconnect your airport

    Your printer must remain in the normal state of "ready" now that he is no longer connected to the network. Can I please have you move to the next step.

    Step 2: Reset the printing system:

    To begin, I will have you reset the printing system on your Mac because it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under "Reset printing in OS X Lion system." This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do add not your HP Laserjet back in right now.

    Once the reset is complete, proceed to the next step.

    Step 3: Uninstall the drivers and software:

    Please click here to find out how to properly uninstall your printer. Once the site opens select the drop down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation.

    Once the uninstall is complete, please continue on.

    Step 4: Check and repair your Mac disk permissions:

    1. Open Macintosh HD and go to Applications
    2. Go to the Utilities folder
    3. Open disk utility
    4. Select the hard disk volume, you use (usually on the left)
    5. Select verify disk permissions
    6. Once this process is complete, select repair disk permissions

    Step 5: Check the Apple updates: 

    1. Go to the Apple
    2. Select System Preferences
    3. Select software update
    4. Click update now
    5. Install your available updates
    6. Computer restart

    Step 6: Reinstall your software and drivers: 

    1. Please click here to download the latest drivers for your HP Laserjet Printer
    2. Once the site opens, click on the download button at the top left
    3. Once the download is complete, follow the instructions on the screen to reinstall your printer
    4. When you are prompted, choose who you want to configure your printer for a wireless connection
    5. Connect the USB cable when prompted by the installer
    6. Wireless now reconfigure your printer for the new airport and network name
    7. Once the wireless has been reconfigured with success on your printer, you will be able to disconnect the USB cable

    -Source: Set up the printer for a wireless network connection

    Once your printer is properly reinstalled via your wireless network please test printing to verify that the problem is now resolved.

    Please reply to this message with the result of your troubleshooting. Good luck!

Maybe you are looking for