LaserJet 5200 L A4-Rotate question of impression

Hello everyone, I have a Laserjet 5200 L
Due to the very often paper jams, I changed the paper size in the tray 2 A4 A4-turn (starting with the short side), but he isnot working.

Per the manual, I need to change the papersize to A4 - R option in the printer driver software, but I can't.

Here's the print driver User Interface

http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c00679924

What are the issues?

Solved.

I have change the papersize in manual tray A4-turn, so it can print the two tray with size A4 - R.

Thank you all.

Tags: HP Printers

Similar Questions

  • HP LaserJet 700 color MFP M775: question of impression

    HP LaserJet 700 color MFP M775 does not print color, only print in grayscale. I printed a page of demo/PQ troubleshooting page and the power state of the printer page, none of these colorful print prints.

    Also have changed all three colour... (Magenta, cyan and yellow) including the transfer kit and image of the hand, still the same... the laser but is mounting kit.

    Any help?

    It's a very strange problem.

    My first regular test for really strange questions would be updated the firmware of the printer.

    There is restrict the color settings in the built-in Web server, but I don't think that had an effect on the PQ test pages.

  • HP LaserJet 5200 and Windows 7. Using CorelDraw X 5

    I have a HP LaserJet 5200 and use Windows 7.  When working in CorelDraw X 5 I'm unable to change the frequency of the pattern of dots when printing color separations.  Never had this problem until we started using Windows 7.  All advanced in CorelDraw user settings are enabled.

    Any help would be appreciated.

    Hello USA-Laser-Pro,

    The HP LaserJet 5200 is a printer. I suggest you post in the forum for HP Business Support for a better chance to find a solution.

    Here is the link to the Board Commercial Laserjet:

    http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

  • OfficeJet Pro 8620: Question of impression WYSIWYG - alt - ñ characters printed in index with Windows 10

    Right out of the gate, I see 10 Windows isn't an option of operating system for the advice of the forum.  I have upgraded to Windows 10, bought a new HP OfficeJet Pro 8620 for its digitization, fax features.  I'm doing some legal work and have lawyers and clients who have Spanish names - I use "n" quite often.  This character is printed in the index, what's not worked for me.

    I noticed the same thing happening with my color HP LaserJet 200 M251.  When I choose printers, the color laserjet printer gives me a PCL driver option and it solves the problem.  There is no option with the OfficeJet Pro 8620.  I downloaded and installed the latest updates of pilot on both printers and it is always the case.  I feel like it is a bug of Windows 10 - someone ' one knows how to fix this?

    It's the police, my default is an old TrueType font supplied with my first HP LaserJet printer: CGTimes.  I think it is bolder and sharper than his nearest police, Times New Roman.  I'll have to give up CGTimes.  Thank you for your help.

  • HP LaserJet Pro M127fn: HP LaserJet Pro M127fn and rotated 180 °

    Hello, where you define the "rotate 180 °" when printing documents? In the direction of properties - Edit - this option is not.

    Hi MonikaSh,

    You are welcome!

    After some research with the print driver. It seems that the best solution to this situation must rotate manually the paper you load it into the printer.

    If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

    Hope this solves your problem and have a nice day!

  • LaserJet 1022n printer (spooler Services) question

    Whenever I try to print, I get an error message that the spooler sirvice does not work. I use the troubleshooting to fix the spooler, but he won't stay fixed. My print screen won't let me choose the printer, it's a LaserJet 1022n.

    Can you please try the following:

    (1) Press Win + r (run the window will open)

    (2) type "services.msc" and press ENTER.

    (3) in the window that opens, locate the "Print spooler" service

    (4) make a right click on the "Print spooler" service and select 'Start Service'.

    If the spooler service was stopped, then this should help solve the problem.

  • LaserJet Pro M275 TopShot: Scanning question/icon

    I use Windows 8.1 (64-bit) and I have a printer HP LaserJet Pro M275 TopShot.  When I got my HP computer, I got a HP scanning icon which I could click and scan easily and also to scan multiple pages into a single document.  I recently had to get a new computer, which is a Dell, and now she just a scan icon and I can scan only 1 page... If I want the 2nd page, I have to save it in another document.  There is no option to scan another page that I used to have.  It only allows me to choose the file type, color mode, resolution and "save to...". ", nothing else.  The used scan automatically appears on the screen and I could crop for how I wanted to only it.  It does not now.   How can I get this back to the way it was?  Thank you!

    Hey @2CatsonEmerald,.

    I understand that you are having problems when your TopShot HP LaserJet Pro M275 MFP scanning to your computer Windows 8.1 that your HP scanning software is missing some crucial features that you had on your old computer. I would like to help you today with this problem of HP scanning software. Can I please you follow the steps below.

    Step 1: Remove the drivers:

    For the purposes of troubleshooting, it is essential that we have a clean slate to work with. I will, you remove all traces of your HP Laserjet in your computer Windows 8.1. If you use a wired USB between your computer Windows and Laserjet, please unplug this cable now.

    1. Open your Start screen by selecting the Windows icon at the bottom left of your computer screen, or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
    2. On the start screen, type programs and features. Click on programs and features to run
    3. In the window programs and features will populate a list of the programs installed on your computer. Scroll through this list and find your HP Laserjet.
    4. When you see your HP Laserjet, click it and select Uninstall
    5. Please follow the prompts on the screen to complete the uninstallation. Once the uninstallation is completed successfully, please close the window programs and features and continue to the next step.

    Step 2: Remove temporary files:

    1. Open your Start screen by selecting the Windows icon at the bottom left of your computer screen, or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
    2. On the start screen, type run. Click on Run to launch the run dialogue box.
    3. In the run box, type %temp% , and then click OK
    4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
    5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
    6. Close the Temp folder when it is empty
    7. Right-click the recycling bin on your desktop and select empty recycling bin

    Step 3: Install the device:

    1. Please click here to download the latest drivers for your HP Laserjet Printer
    2. Once the download is complete, follow the prompts on the screen to install your printer
    3. Once installation is complete, please try the scan function to check if all your scan options are returned.

    Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

  • Type questions NMH405 Impressions after the first few days - and a few beginners

    Hi all, after some research I made the plunge and acquired a new NMH405 (I really wouldn't have no existing "NMH400" i.e. no discs).  I removed the 500 GB drive and added two new drives 1.5 to WD Green Caviar and set up in Raid-1 after a few messages of error and waiting for a very long time, so that readers resynched I managed to get online as z-drive on my vista system.  I played a bit with the built-in backup tool (I like it!).  I tried the builtin player after placing some of my iTunes on the pole media albums and decided that I didn't really like this option for many.  I then simply moved my itunes on the MediaHub libraries and used iTunes on Vista as a front-end application.   It works very well.

    I have a few questions, probably show my limited knowledge of readers connected to the network.

    Q1.  Is there another way to turn off the device by pressing the bottom on the NMH405 (aka my NMH415!)? When turned off, I assume that the only other way to power it on again via the background?

    Q2.  I noticed that the device is offline for centuries after having recycled Windows Vista or the hub itself.  Why is this? And what can I do to put it online in an orderly fashion?  There must be a way to get that ugly red crossed NAS showing green and online as a z-drive in 'My Computer' much faster.

    Q3.  I reformatted the drive of 500 GB that the box came with, added to the drive enclosure box and attached the port USB in front of the NMH405, after awhile he said on the Panel until she had detected the drive and asker if I wanted to import content.  I refused (partly because he was empty!).  Now, how do you get this drive? (Occasionally), I would use it to backup my Raid-1 configuration files (most recent do you know what might happen there...).  How to use this USB disk attached?  Also, I noticed that it does not appear in 'My Computer' - in fact "computer" in windows?  Add directly to my windows system it is detected instantly?

    Thanks for the pointers or responses to improve my user experience.  I'm still learning here.

    Best regards

    Q1. Your correct, there is only one button on the front for the start/stop. There is an option to restart the device inside the web interface through the configuration > system option.

    Q2. It depends on how fast your network can establish a connection, a mapped network drive is fine but I noticed that it slows down the process startup or logon when you turn on the PC. What I did just create a shortcut on the desktop (site \\nmh410\media) that points to my mediahub and did not map the mediahub more to drive z.

    Q3. If it's still a drive of 500 GB fresh with nothing on it, then you will need to create a partition on it firstly the external USB drive by connecting directly to the PC. Read this Microsoft article on partitioning. In my view, that an external USB drive icon will not be displayed on the PC from the external USB drive is plugged into USB port of mediahub. To access this disk external USB which is plugged into the USB port of mediahub, I simply create a shortcut to \\nmh410\media\device . For backup, you can use the NTI Backup software that accompanies your mediahub.

    See you soon.

  • Question of impression black Officejet 4620

    Despite the process of cleaning and cleaning event, cannot print all disconnect report print...
    Black cartridge ink level, inserted properly, no way!

    I would advise to call HP support on this issue, regardless of the question whether the printer is under warranty

    Troubleshooting steps

    http://support.HP.com/us-en/document/c03944809

    Phone numbers

    http:// Welcome.HP.com/country/US/en/wwcontact_us.html

    Updated FW for JO 460

    http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/getting-the-latest-firmware-amp-product-updates/m-p/3326035

  • BlackBerry Smartphones Dtek50 auto rotation question

    Hello community,

    my old Dtek50 of a month, sometimes stops auto rotation toggle turn same auto is on. I checked the settings-accessibility - auto rotation... is on. Device settings-display-when is turned isn't properly adjusted on do rotate the contents of the screen. I did the test of the sensor with the expert virtual Blackberry and the sensor works very well. I tried with a game using the sensor and everything is ok. A simple reboot solves always... but it's a bit boring.

    Last week, it happened twice. I noticed this problem after update from September.

    Anyway, today I did a factory reset... I'll monitor the device without having to install the apps I use generally.

    Has anyone else experienced this problem?

    Auto rotation problem solved! As I said in my previous posts my sensor has worked well (and so I have is maybe a software problem, kernel?).. .so I tried a few apps from the game store: the only one who's really works: "auto rotation to lie down". For those who are facing the problem just install the app and give the requested permissions. Works like charm! Glad for not having sent the smartphone for repair!

  • Ellipse tool at rotation question

    Hello

    When I rotate an ellipse change size and shape are elongated.

    If anyone has an idea how to solve this would be useful.

    See you soon

    In other words, scrap what you have and work in a mock-up AE with square Pixels - a Pixel Aspect Ratio of 1.0.

  • Simple rotation question

    I have a small arrow at the bottom of the screen which I want to turn in place, as it is.  When I try and rotate the image, even if it turns around the center of the display screen and not around him.  I thought that it was a simple matter to change the anchor point but I'm not sure how it is done and my trouble guessing has gotten me nowhere fast!

    Thank you!

    With the clip selected in the sequence, go in the effects Panel (it should be in a tab under your Source monitor); There, you will see a built-in effect called movement, with a small square near her icon. Click on this icon or the word 'Motion' and the viewfinder appears in the monitor of the program for this particular item. Rotate downwards trajectory (the small triangle to the left) effect and all the effects that you can adjust will appear. From there, you can proceed as above. What the effects are similar, for reference:

    Also, I assume you mean that you used the titration module in the body to make this triangle/arrow. If so, you can easily open this title and move the triangle, the arrow towards the center of the "Web" by clicking on the Center Horizontal and Vertical buttons. This will put the anchor Point in the middle of the graphics, which in fact turning a little easier. See my first response to this information.

  • Print statements > Question of impression

    Hi, all.

    I need your advice on the following situation.

    I understand that the output files of competing application go to $APPLCSF / $APPLOUT.

    Under request details > section once > Print to: field is populated with a valid printer. If you click on the Option button > is displayed once > under print output to the printer area is filled with a printer name and Copies are set to 1.

    This concurrent request creates a .pdf proof of statements. Users say that they only print proofs of the statement and simply display the output in read only mode file.

    In the it Department, we believe that they are printing jobs that raises questions in the queue, Linux. Linux Admin log does not tell us what specific job, print users. There is no way to identify these specific jobs among thousands of other jobs.

    How can we prove or disprove that users print evidence of declaration or not?

    Thanks in advance!

    Hello

    Users submit this concurrent program? If so, you can find details of the competing application and see the name of the printer as well as the number of copies. If the number of copies is greater than zero, then it was definitively submitted by users. Also make sure that the number of copies of this simultaneous program (in the competitor > program > define) of the screen and make sure that it is set to zero. In addition, please check that the value of the profile option ' simultaneous Copies of report: "is set to zero at the level of the user/application/responsibility.

    Kind regards
    Hussein

  • HP pavilion: question of impression Deskjet

    recently I had a problem with printing. When I print a large amount of text some lines seem to have half the missing words superior. but prints correctly.

    The ink levels are good

    It is the all-in-one HP deskjet series 1510

    Any help appreciated woulf

    Hello, @millmillx - hope you are well!

    Thanks to their participation in Forums of HP! I see by your post that you are having problems printing your Deskjet printer. I will definitely do my best to help you.

    First of all, we will try to solve this problem using print HP and Scan Doctor (PSDR). PSDR is an automated tool that allows you to diagnose and resolve problems printing and scanning. Visit http://hp.care/2bZ9w2q to download and run the HP PSDR. Once you open the program, click on "Fix print" to solve this problem.

    If the problem persists, try the following steps:

    • If present, disconnect the USB cable between the printer and the computer.
    • Go to control panel of configuration-programs and feature - select all of the HP Deskjet printer entries and uninstall them.
    • Restart your computer.
    • Now go to http://hp.care/2etPzkQ to download and install the printer drivers.
    • If you are prompted, connect the USB cable.

    Let me know if this helps. Also, let me know the operating system on your computer if you need help.

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

  • Color LaserJet MFP Pro 277dw: hostname question

    I have problems printing using a Wi - Fi connection. I wonder if the host name is important. When I manually install, I get the next part:

    The model name is correct

    The IP address is 192.168.1.143

    Hardware address is 184F3293199C

    Host name is NPIC62308

    I have usnderstand everything but the host name.  There should no door on the router?  When I check the port settings, the specific IP address does not appear, just the hostname. It's not supposed me; I want to see is the ip address.

    Is it important or that I'm afraid for nothing?

    Thank you.

    You put the IP address of the printer in the location bar of a browser.

    With the HP printers you often get a warning that says that its a non-secure site because the printer has not a certificate, then click OK to continue if this happens.

    If my post is solved your problem and click the accepted as button solution under him.

    In order to thank a Tech for a post click the thumbs up button under the post.

    You can even click on the two keys...

Maybe you are looking for