LaserJet CM2320fxi MFP scan option not available with windows 7?

Similar Questions

• Series HP Photosmart Prem C310: Scan option not available in the scanners on Mac and Printers dialog box

  I had a problem with my connection Wireless to my printer. I deleted my printer to my preferences system (Printers & Scanners dialog box) by mistake. I was able to add the printer to my Printers & Scanners using the IP address of the printer dialog. The work of connection to printer and I am able to print. However, I lost the option of detection (the Open Scan option does not appear in the Printers & Scanners dialog box). I installed a driver from Apple and I also installed a driver of HP. The driver available for my printer model appears to be a patch only.

  Here is a screenshot of my Printers & Scanners dialog. Before I deleted my printer, she had a scanning tab.

  

  I tried to find a full version of the HP software for the printer but fails.

  Hello

  By consulting the user guide once more tried to locate all the other parameters that may apply, I could personally find not 1 but of course there might be there... as any router have different options and many...

  Have you checked with your ISP that you have the latest firmware for your router? any update of the firmware can help a lot with this kind of questions.

  It is the only router, right? It has no additional effect as a range extender. etc?

  You get power from the strong wifi signal for your printer and computer?

  Please let me know the results with the USB for the moment, the software is there as we have strengthened it even installed earlier...

  Please keep me with any change, I'll try to think of other measures to try while waiting...

  See you soon,.

  Shlomi

• Windows authentication feature is not available with windows 7 Home premium

  Hello

  Can someone help me how to add the functionality of windows authentication in windows 7 Home premium.

  Hi Kishore,

  1. is your system connected to a domain?

  2. are you referring to the configuration of the default authentication for IIS 7?

  Windows authentication is not supported on home or Starter of Windows Vista and Windows 7 editions.

  For more information, see the article:

  Configure Windows authentication (IIS 7)

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• LaserJet M1212nf MFP: Scanning does not... Once again.

  You are God * beep * serious? I've lost my patience with this thing. Used to scan via USB, but the part on the printer pulled plug and pulling repeatedly. Then connected by Ethernet cable. Would not scan. It turns out that the printer must be plugged into a wall outlet instead of the power bar. Very well.

  And now, it does not analyse new, but this time I literally haven't touched it since the last time once I plugged it in the wall. The device is in offline mode on my computer but can still print documents, but it won't scan. I checked the power cord of the printer and it is not loose at each end. All my drivers must be current.

  Well, this should allow you to analyze:

  1. If the printer is connected via USB cable to your PC, delete.
  2. Click on start and open devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons of your printer listed.
  6. Download and install the latest drivers by clicking on this link.

  Please let me know the results after doing the above.

• Maico ERO-Scan does not work with WIndows 7

  I have an ERO-Scan of Maico USA.

  The cradle is not recognised in W7

  Can someone tell me how to solve this problem?

  Thanks for your help.

  Hi Fred,.

  1. You have installed the ERO-scan software on the computer?
  2. The computer is able to recognize other USB devices?
  3. The device works fine on another computer?

  You can try the following steps and check if it helps.

  Method 1:

  You can consult the following Microsoft article and check if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-AU/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  If the problem persists, I suggest to uninstall the software from the computer and reinstall.

  You can see the following article from Microsoft to uninstall the program from the computer.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-AU/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  After uninstalling the program, I suggest you to install the program again and check if it helps.

  You can also see the following for more information Microsoft article.

  What to do when a device is not installed correctly

  http://Windows.Microsoft.com/en-AU/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  If the problem occurs only with this device, I suggest address you the Maico press for additional help.

  http://www.Maico-diagnostic.com/com_en/menus/pages/contactform.htm

  Please post back if you have problems related to Windows and we will be happy to help you further.

• publish the option not available in windows movie maker in XP Professional

  I use Director of windows and I finished my movie and went to the file to publish, but the post is not there at all!

  Am I doing something wrong or what is the thumb?

  I use Director of windows and I finished my movie and went to the file to publish, but the post is not there at all!

  Am I doing something wrong or what is the thumb?

  ===============================
  There is no option to publish in the Win XP 2.1
  version of Movie Maker...

  See the following steps:

  (1) to save the project to a re-Edition .mswmm file
  in Movie Maker...
  Reach... File / save project... or... Save the project under...

  (2) to save it to a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  (3) to save it to a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  In addition, you may find it useful to use
  a custom profile:

  Movie Maker 2 - economy
  Movies - profiles custom WMV
  http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

  Creating custom profiles
  for Windows Movie Maker 2
  http://www.Microsoft.com/windowsxp/using/MovieMaker/expert/CustomProfile.mspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• not available with windows outlook MSN 7 spell check

  I have two computers running Windows 7. When I bring my Outlook MSN typing a new spell check Email isn't here as it is on my third pc running Vista. How can I check spelling on my Windows 7 pc?

  Hi Dan,.

  
  Spell check has to work with or without an operating system. Please see the positions in the link to activate the spelling check:
  http://answers.Microsoft.com/en-us/windowslive/Forum/mail-email/spell-check-in-outlookcom/50854614-3fd7-489D-98B9-624e5c731767
  If the problem persists, please post the request to Windows live forum:
  http://answers.Microsoft.com/en-us/windowslive/Forum
  It will be useful. Let us know if you need help

• Satellite A660 - Win 8.1 power settings option not available

  Hello

  I upgraded my Toshiba (A660) to 8.1 64 x. (clean install)

  All if works well except idle protected function, which seem to have disappeared of power options.
  In my view, that a driver is required. (I have installed a single Toshiba driver)

  They don't seem to have VAP more.

  Can someone tell me what is the driver I need to install for this problem?

  Thank you.

  > All works well except idle protected function, which seem to have disappeared of power options.
  What exactly is the function of inactive variation? Display backlight control?

  Toshiba not stand in my knowledge of Windows on the Satellite A660 8.1 and therefore you would not find drivers Windows 8.1 for this series.

  If you want to install the utilities and tools Toshiba Windows 8.1, you will need to seek such software in your own hand. But I'm not quite sure if software published for other portable Toshiba would be compatible with the A660 m model.

  However, the fact is that there is no such thing as the package of added value to win 8.1.
  This was the case with Vista or Win 7, but it is not available for Windows 8.1.
  The VAP has been replaced by the system of Toshiba driver.

• Update are not available with this Apple ID.

  I bought my MacBook Pro 8 months ago.  Today, I get an error that I can not update my iPhoto in the App Store.  It says "update not available with this Apple ID.  This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled. "I read a lot of FAQ online, but none of them say that they had this error with iPhoto, which is an application that I have not purchased (so I can uninstall it and reinstall it as suggested).  Y at - it an easy fix?  I tried to reach out to the Geek Squad, but which is not helping either.   Thank you.

  If you are not the original owner of the MBP you must erase the SSD drive and reinstall the os x which then attaches your ID for the MBP.

  You can do this by starting the MBP in the restoration of the Internet by using the OPTION, COMMAND + R keys.  The result will be a presentation with a rotating globe:

  

  This will connect you to the Apple servers.  Following the directions, you get this menu:

  

  First use disk utility to erase the SSD drive.

  Then click "Reinstall Mac OS x"

  A strong Internet connection is rrequired.

  Ciao.

• D7360 automatic duplex printing is not available with the latest driver

  D7360 automatic duplex printing is not available with the latest driver

  Hello ephsh,

  Welcome to the HP Forums.

  I see that you have a question to try to make some duplexing.

  So I can better help you, please answer with the operating system that you are running:
  Operating system Windows am I running?
  Mac OS X: how to find which Mac OS X Version is on my computer?

  I will attach a document that addresses an double-sided printing Option is not available even if an Automatic Two-Sided (duplexer) printing accessory is installed.

  Please do not hesitate to write me again at your convenience.

  See you soon,.

• Width sensitive not available with uniform spacing in the menu?

  A sensible width menu is not available with uniform spacing? I have a few pages with short and long name then, some need uniform spacing. When I check this option if I seem to lose the ability to have a responsive menu width. In fact I don't seem to have any option resize at all when this option is selected. My only choice is to set breakpoints and resize my type?

  Yes, this is not yet implemented.

• The printer options not available when printing from Lightroom

  Hi all

  I have a problem with the interface of Lightroom 2 (version 2.4, executed in 64-bit mode on my Intel Apple Mac with Mac OS X 10.5.8 (Leopard)) to my printer driver, an Epson Stylus Photo R800.  I can see looking through the forum that there has been a lot of problems with printers, but none as far as I can see that seem to cover my particular problem.

  In the Lightroom print module, after setting everything up, selecting the correct ICC profile for the printer/paper etc. I click on the button "print...". "at the bottom of the right panel to launch the dialogue of the printer.  My problem is that the essential options, I need access to this printer dialogue, namely 'Print setting' (to determine the media type, and print quality) and "Color management", (to disable the printer color management)-are disabled.  To be exact, these options have a line through them, as if they were crossed.  "Print option" and "Setting the Extension" are similarly disabled, while "Layout", "Paper handling", "Cover Page" and Planner "are available.  (See JPEG screenshot attached.)

  If I try to select one of the options not available such as 'Color management' I see the following on the screen error message:

  "The bundle 'Color management' couldn't be responsible because it does not contain a version for the current architecture.  Contact the creator of all here for the most recent version: Color Management 3.09, SEIKO EPSON CORPORATION 2001-Copyright (C) 2005. All rights reserved. »

  The strange thing is, if I print from Photoshop CS3, there is not this problem: "Print setting" and "Color management" are not disabled, and I can make the adjustments I want.

  Coming off the printer prints color are way off if I print from Lightroom, so that from Photoshop, they are great - I guess because of this problem (I can not turn off printer in Lightroom color management, so that I can in Photoshop).

  I guess that this is a problem in the interface between Lightroom 2 and my printer driver, but I find it strange that I don't have the same problem in Photoshop.

  I have re-installed the latest printer driver downloaded from the website of Epson many times, following the instructions to the letter to Epson to remove the old drivers of my machine, to nothing does not.

  I really want to print from Lightroom instead of Photoshop, I like the simplicity of the Lightroom print module.  Can anyone throw any light on this?  Any help or ideas gratefully received!

  Thank you

  Ian

  Just save a driver of printer/preset in any 32-bit application. Then apply this preset when you print from LR runs as a 64-bit application. It is only the interface that is the problem. It should show very well, at least it does with Canon printers.

• Error message: not available with this Apple ID update

  App Store displays the available updates, but after choosing "Update", the error message starts "Update not available with this Apple ID" appears. All of the applications in question were purchased with the current Apple ID.

  Mac Pro (2008), 10.11.4

  Please test after each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes. Remember, no one here is Apple or can help in problems of service the customer.

  Step 1

  If you have recently changed something in your Apple ID account (for example, the password), log out of the App Store and reconnect.

  Step 2

  A purchased app can only be updated by logging into the App Store with the same identifier Apple which was originally used to buy it. There is no way around this restriction, which applies also to the free applications. If you can not connect to help ID the buyer, remove the app and reinstall it. You will have to pay for it, once again, as appropriate.

  Step 3

  If you receive the alert when you try to update a grouped iLife application, select the shopping page in the App Store and find the application in your purchase history. If there is a button marked ACCEPT on the right, click on it.

  If you have a used Mac, bundled apps related to Apple ID of the original owner and may apply to you. Reportedly, customer service has published codes redemption to some owners of second who asked, but it is not guaranteed.

  Step 4

  If you try to update the iLife or iWork applications that were installed from a purchased DVD, or if you have a refurbished Mac purchased directly from Apple, contact App Store customer service for a redemption code. If necessary, you will be asked for the part number of the DVD.

  Step 5

  In the App Store menu bar, select

  Store ▹ view my account

  Enter your Apple ID to the command prompt. In the lower right corner of the window that opens, click the reset button. Close the window.

• Update are not available with this identifier Apple - iPhoto

  Hello

  I bought a MacBook Pro 13 "and for awhile, I had problems with the update of the application iPhoto. I used to have the "Update not available with this Apple ID" problem with updated Garageband and Pages too, but it somehow sorted on itself and someday update just worked. But I've had this problem with iPhoto for a long time now and I can't update. I tried to put it in the trash as someone advised him in another thread with the same problem and then I tried to get the app on the AppStore but I can't even find it. There is simply no app iPhoto for me. Someone had a similar problem?

  Any advice would be appreciated, thank you very much in advance!

  and then I tried to get the app on the AppStore but I can't even find it. There is simply no app iPhoto for me. Someone had a similar problem?

  Apple has stopped the development of iPhoto, and it is no longer marketed in the AppStore. The only way to update is by reinstalling, if iPhoto is listed in your purchase history - tab in the App Store purchases.

  Purchased from iPhoto on the App Store? Or accept for your AppleID if you bought a Mac with Mac OS X Lion or newer, which came without DVD Installer?

  If iPhoto does not appear in your purchase history, you cannot update now longer.  This could be the case, if you have installed iPhoto to an iLife DVD Installer, or it came with an earlier version of Mac OS X on the DVD Installer.

  See user tip of Barney: cannot be updated iPhoto because it is not available in the App Store

• update not available with this ID apple after upgrade of the Genius Bar

  I had the Apple Store me level to El Capitan.  Today, my attempt to apply an iPhoto update resulted in response that says: "update not available with this Apple ID.  This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled. »

  Please test after each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes. Remember, no one here is Apple or can help in problems of service the customer.

  Step 1

  If you have recently changed something in your Apple ID account (for example, the password), log out of the App Store and reconnect.

  Step 2

  A purchased app can only be updated by logging into the App Store with the same identifier Apple which was originally used to buy it. There is no way around this restriction, which applies also to the free applications. If you can not connect to help ID the buyer, remove the app and reinstall it. You will have to pay for it, once again, as appropriate.

  Step 3

  If you receive the alert when you try to update a grouped iLife application, select the shopping page in the App Store and find the application in your purchase history. If there is a button marked ACCEPT on the right, click on it.

  If you have a used Mac, bundled apps related to Apple ID of the original owner and may apply to you. Reportedly, customer service has published codes redemption to some owners of second who asked, but it is not guaranteed.

  Step 4

  If you try to update the iLife or iWork applications that were installed from a purchased DVD, or if you have a refurbished Mac purchased directly from Apple, contact App Store customer service for a redemption code. You will be asked for the part number of the DVD.

  Step 5

  In the App Store menu bar, select

  Store ▹ view my account

  Enter your Apple ID to the command prompt. In the lower right corner of the window that opens, click the reset button. Close the window.