LaserJet CP1525nw: CP1525nw color printer leaves magenta spots to the left of each page

Similar Questions

• Print HP Laserjet Pro 100 Color MFP M175nw missing / disappeared along the axis of each page

  HP Laserjet Pro 100 Color MFP M175nw. operating on Windows 7 from my wireless laptop. Just bought this again a few days ago and every page of the printed word has about 20mm wide streak lack of feeling running down the Center. What can I do to fix this? I tried printing a page a couple of times of cleaning and the print quality too a few times Menu color grading, but that made no difference. I use a Premium quality paper for use of the laserjet printer. Could someone please let know me what I can do. Thank you in advance.

  Hi Watcher35,

  I see that the Laserjet Pro 100 ACM M175NW new is missing print in the middle of the pages, you ran cleaning and color calibration, but the issue is not resolved.

  This would be a specific example of the question: but with the 'Bb' would be completely missing?

  This HP document: solving Print quality problems can if you take some of the same steps you did already, I suggest you don't skip any step.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

  Kind regards

• The print is so small. How can define you default largest size print without having to click the icon on each page?

  The print is so small. How can define you default largest size print without having to click the icon on each page?

  The Firefox Page Zoom feature makes a domain level by area to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox, as with some other browsers.

  Try the extension Default FullZoom Level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

  Or the NoSquint extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/2592/

• HP LaserJet CP1525nw color print quality problems

  I got a HP LaserJet CP1525nw color about 2 months ago. After about 4 weeks, I noticed a print quality begins to degrade. Black started first by streaks and fading. Now when blue prints starts to show streaks and melted a magenta pink. All cartridges are at 50 percent of capacity or more. Any ideas about what to check?

  Hello Graf213,

  There are a few things of different which could cause print quality begin to deteriorate on printouts. My guess is that the printer may need to be cleaned and / or calibrated.

  Troubleshooting HP article addresses print quality issues, and provides for the issue of many resolutions.

  Solving print quality problems

  Perform the steps, and I would like to know the results.

• My HP LaserJetPro CM1415 is printing a little gray at the bottom of each page. Very ugly.

  How can I fix it? It's a little light gray at the bottom of each page.

  Hi again,

  OK, that helps a lot, thanks! I think that this document will help to solve your problem: http://support.hp.com/us-en/document/c02260982

  It looks like the problem you are experiencing:

  

  And this paper focuses on it. I would start with the Solution two, because this problem is probably related to the drum black cartridge in the printer. Often times following these steps will fix it. Another option is to replace the black cartridge drum with a new one.

  Let me know!

• Bought HP Laserjet Pro 200 color printer & unable to connect

  Bought HP Laserjet Pro 200 color printer & unable to connect to my Windows 7 laptop. The printer setup was a snap, but no connection. Tried all Windows resources, but...

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• HP LaserJet 5200tn: y at - it an option to print the ip address or the name of pc at the bottom of each page printed, sent by this pc

  y at - it an option to print the ip address or the name of pc at the bottom of each page printed, sent by this pc.

  I don't think that there is no easy way to do it.

  Alternatives can be:

  • Maybe insert the data required in the document source (before printing), using features (such as headers/trailers) supporrted by application of document source (for example, Word); drawbacks to this are not all applications supporting these inserts and (once inserted) what happens if the source document is copied to another work station?
  • Rather than insert "pc name" or "ip address", you can maybe automatically insert 'document name' on each page ( watermark) If you are using one of the latest HP Universal Printer Drivers - see http://h30434.www3.hp.com/t5/LaserJet-Printing/Print-current-date-on-each-document/m-p/5734909 for a brief discussion of something similar ('date/time' rather than 'username').

• My ip6glass Panel is the lifting of his body. There is a black spot on the left corner. How much would it cost if I go to the Apple Store because my warranty is expired. I heard that they would replace it for free even if the warranty has expired. True or

  My ip6glass Panel is the lifting of his body. There is a black spot on the left corner. How much would it cost if I go to the Apple Store because my warranty is expired. I heard that they would replace it for free even if the warranty has expired. Is this true? Thank you

  Sorry, but at least the screen needs to be replaced. Do you have the battery exchanged in the past?

  Visit an Apple Retail Store or an authorized Apple Apple Service Provider next to your place to achieve this.

  You can also contact the Apple Support to send it.

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

  Pricing of the service repair screen

  Repair and replacement costs depend on your iPhone and your AppleCare products cover model. Apple runs a diagnostic test to determine if your iPhone has suffered additional damage. If she has, or if she needs more repairs, you may have to pay out-of-warranty service. Accidental damage is not covered by the Apple one-year limited warranty.

  Model	Screen repair cost
  iPhone 6	$109
  iPhone iPhone 6s 6 Plus, iPhone 5 s, iPhone 5, iPhone 5	$129
  iPhone 6 sec more	$149

  In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during testing. Pricing and terms vary for the service by an Apple authorized service provider.

  copied from answer Service Center - iPhone

• I want to print the username in each page using the network printer. To identify which print this page.

  Print the computer name on each page using a network printing

  Dear all,
  Help on this issue. I want to print the username in each page using the network printer. To identify which print this page.

  As much as I know that you can't do this with every printed page, but you can use the separation pages (* .sep) and have this printed on a single page at the beginning of each print job.

  Tip: Put the separator page in the folder % WINDIR%\System32.

  See here: http://support.microsoft.com/kb/102712

  .Sep file is just a text document, the following prints only the user name:

  Name $LUser $N
  $E

  John

• When I print from Windows Live Mail, the left margin is far more than the first letters of each line are missing. Where can I go to change the margin?

  When I print from Windows Live Mail, the left margin is far more than the first letters of each line are missing.  Where can I go to change the left margin on Windows Live Mail?

  Print settings are in Internet Explorer, the file (ALT + F keyboard), Page Setup

  Increase the left? the margin of

• You print envelopes with HP LaserJet CP1525nw color

  I tried to print envelopes on our printer above.  My document is in Word is formatted accordingly for a #10 business envelope

  Under the terms of the HP help function, I found the info on how to set up my document print options, then it would print correctly.

  The first envelope printed on the side of Rabat; I have reloaded in Tray 1 and was ready.

  The second envelope printed with success so I thought that I understood.  So, I loaded the tray paper with 5 envelopes, hoping to print them massively.  I couldn't get it work when I tried to print 4 at a time.  I got a "Paper jam in tray 2" error and I was not yet using tray 2.  I erased the 'problem' and AN envelope printed with success, then I got the same error message.

  I had 2 envelopes more printed this way, but every time I got the same error message, erasing the machine and 1 printed envelope.

  Frustrated, I cancelled the multiple print job and tried to print envelopes one by one.  Now it does not at all even if I delete the phantom paper jam every time.

  Can anyone help with this?  It makes me nutty.

  Background info: my husband (network engineer) install the printer.  I have over 20 years of experience in processing and usually have good results with appearing on printing problems.  It left me speechless!

  Thanks for any help you can provide.

  Dianne

  The CP1525 allows you to print envelopes. There are two ferries, which can be used. I will describe using only the lower tray. Normally, this tray is used for standard paper.  To use the letter envelopes, you must remove the tray and then make some changes. Remove all paper. There are supporters of blue color paper. Two are used for the width of paper. Move the cursor to the Center so that it will load the envelope with the top to the left. Put the envelope with the printable side upward and the top to the left. Slide the blue paper holders so that they touch the top and bottom. Then push the envelope completely backwards and then move the holder unique blue paper in the front to make it against the envelope. You're ready to print as much as the printer.

  I select the printer properties. I indicate that I am printing an envelope. I had also to indicate the landscape. I also had to move the appropriate print areas where I want to be. Then I added my address and the address to where they're going. I'm not sure that I have everything but it should work well.

  I only did this, but you can use two trays with one who holds a number of pages and the other for a certain number of envelopes.

• HP Laserjet 2840: HP Laserjet 2840-custom color print after Windows update.

  I updated my Windows 8.1 operating system (64-bit) with the provided updates, automatic updates of Windows, about two weeks ago.  After that my HP Laserjet 2840 will not print anything in color.  It copy in color, so I know that the printer still works.  Ayone have any ideas as to why this happens, and yes I tried to reinstall or update printer drivers provided on the HP website.  Still does not work and want a solution or I will throw this printer out the window, literally and buy something new that works with 8.1.

  Updated - with the help of the forum search on another HP Color LaserJet-cannot print in color - I used these steps in this post to solve my problems of color printing.  Please keep this forum so valuable to others who have questions and need to find solutions.

• Help! My M475dn MFP HP LaserJet Pro 400 color printer will NOT print!

  HP LaserJet Pro 400 color MFP-M475dn-CE863A

  Printer on a network and can connect to multiple computers that include: Mac OS X, Windows 7 and Windows XP.

  When I try to print from my iMac, the print queue of the printer says "the printer is not connected.  When we try to print from Windows computers, it is in the right queue and does not print.  When I go the printer itself and try to print a page of demonstration or page supplies directly to him, it says on the screen which is printed, but nothing happens.  This is not hum or anything!  The port where the network cable is connected is switched on green that says HP which means that the network cable is connected.  We've had this printer for a year now, and something like that never happened.

  I did not have any software or anything like that until this happened.  It was working fine on Saturday when we used it, but when we arrived at work today, he just decided that it would interrupt printing!

  I'm puzzled!  I tried 'ping' IP address of the printer from my iMac and it pings fine.  Does anyone have advice?

  (I tried to make of the obvious like too switch the printer on and off and shutting the computer down and nothing!)

  Okay, so I feel a bit stupid right now.  I decided that I would be closed the printer for about an hour to see if it was there, and what you know-it has been!  I had to turn it off several times before but I guess it wasn't long enough.  What a pain!

  Thanks to everyone who took the time to read this!  Sorry to waste time everyone!

• Color LaserJet Pro M277DW: LaserJet Pro M277DW Color print in b & W / Grayscale only in Mac OSX PhotoShop / InDesign

  First of all, I have consulted page 123 of the manual as a response to a similar question can be a solution. The options mentioned for select tab color, and grayscale, etc., apply only to the Windows driver, not OSX.

  I use Mac OS x.  With the base driver ready to install on the Mac, there is a box of Options of the printer with a 'Black & White' checkbox is available, this will print successfully using only the black toner, in *not color managed* software, such as the preview Mac and Word, etc.

  

  In Adobe Acrobat, Adobe InDesign, Adobe Photoshop, even with the checkbox 'Black & White' ticked, the software continues to print in color, by substituting the safe choice 'black and white' of the driver.

  How can I force the LaserJet Pro M277DW Color to print using only black toner cartridge in PhotoShop / InDesign / Acrobat, color managed - on a Max OSX software?

  This can be easily achieved with my Epson color inkjet printers, if I select black only - I get only a black / grey print from Photoshop / Indesign / Acrobat, why is it not an option with this HP printer? -Surely everyone needs this option B & W, a basic requirement and should have been in the design of the driver of the day 1. which option / check box / treat I'm dominant? Why is Photoshop / Indesign / Acrobat of the substitution of the option of blocking & saved from the driver?

  HELP PLEASE!

  -------

  NB. the question is not helped with the dedicated HP driver downloaded from the drivers HP page. This looks like it offers more options via a link "web-server" to the printer, but with this driver the 'black' option is totally deleted Print Options! - Neither is B & W available as a print of "web-server" Printers page, making the entiely to the useless HP driver!

  See here, it's using the dedicated downloaded driver, the B & W option is gone! -which means that I can not print even in B & W with the software not color managed (Mac Preview etc)...

  

  After a day of experimentation, the question was a subtle detail when you select Add a printer.

  Maybe it will help others with the same problem when using Mac OSX...

  When you add a printer in the dropdown list use, the default is Secure AirPrint, this removes the possibility to print in B & W! - and removes the other options!  Got knows why this is the default value.

  Make sure you only select the printer named on this drop down menu - the M277dw - as has pointed out below.

  

  The printer will then work with all available parameters - and works wirelessly (I assumed the use, it will take the AirPrint - but he doesn't - that this also removes the features; selects the actual name of the printer).

  Once this 'use' is defined correctly, the grayscale option is available via the Options of the printer in the application you are printing since then, inclusing Photoshop, etc., whew.  I also saved it as a "Preset" BW...

  

• LaserJet 2600n: pale color printing on LaserJet 2600n

  When I generate a test print of the HP computer, the test print product of the past instead of bright colors and vivid pastel colours.  When I print color any of my programs, I also get faded colours.  However, when I generate a test print directly from the printer, the colors are bright, so I don't think that there is a problem with the printer itself (that is, I don't think he needs a cleaning or replacement of the print head, etc.).

  I just replaced all the toner with the genuine HP toner cartridges.  I have recently upgraded to Windows 10, 64-bit, if I think that I had the problem of faded color before.

  I think the problem with the drivers, but when I go to the HP Web site, I walk around, put my model number in dozens of times, wait and wait and wait, and then the site finally said it can not access the page!  I repeated this process several times.  Anyone else out there with this problem?  Is it sounds like a driver for you problem?

  Thank you.

  Colleen

  Hi Colleen,

  CLJ 2600 printer is old, you might suffer from problems of PQ.

  Power #Print State page & check the quality of the color, if you found any hue even United Nations or dull quality, then you need to clean the Laser Scanner internal Assembly reflecting lenses. Gd clean all the lenses in these areas with swab as shown in the figure.

  #Upgrade the latest firmware.