LaserJet CP3505: Hp Laserjet CP3505 firmware update is blocked at 6/6 A / F

Similar Questions

• LaserJet cp5225dn: laserjet cp5225dn firmware update is possible on network?

  I want to update the firmware on my Laserjet CP5225DN 2013. Instructions for downloading that the printer must be connected via USB. But when I run the exe firmware on my windows 10 desktop, it finds the printer on the network.

  I can possibly ruin my printer when trying to run the update of the firmware via the network instead of via USB?

  In order to run the update via the USB port, I have to carry the desktop PC to another from one end of the House.  All laptops that we have are macs, and the update of the firmware only works on a PC.  I expect a professional printer to be easier to manage than to require a USB connection, but I dream?

  Thanks for any help you can provide, as the warranty has expired for a long time.

  MJ - lee

  The instructions are as they are for a reason. Wired connection for firmware updates is always better. If wireless has been used and the wireless drop in the middle of the update, your printer can be roasted.

• HP Laserjet CP3525 Firmware update failure

  I tried to update the firmware on a HP color Laserjet CP3525 using a USB connection by following the instructions that were posted on the HP website for the update of the Firmware.  It seemed that everything was fine, but when the printer is restarted it never gets past 6/6 on the LED display screen.  I left the printer in this condtion for several hours and it never gets beyond this area. I guess the upgrade of the Firmware caused the printer to do a hardware failure and is not recoverable, but I hope someone might be able to help get this back to the top and work.  Any help would be greatly appreciated.

  Well, in general if the firmware update was interrupted for some reason any it would lead to this. This may be caused on the side of the computer (rebooting/logging out/end of the process until it's full) or the cord to which you are connected with, it is damaged in any way or not well focused in the USB ports.  I'm sorry you're in this situation, I understand that in a situation with limited spending caps, you would have legitimate to update concerns your other machines.

  If you have any questions or problems I or one of my colleagues are on this forum almost 24/7.

  I hope you have a wonderful rest of the week, Bob!

  -Spencer

• LaserJet 1525nw firmware update for macintosh

  HP LaserJet printer, 1525 NW

  Operating system Mac OS x Lion 10.7.2

  I received an email saying that I needed to update the firmware of HP. I have downloaded and run the Mac installer. It crashes when it tries to download the update of the firmware from the internet. There is no explicit description of the error - the installer simply crashes. What am I supposed to do? I tried to download has repeatedly where the first copy has been corrupted. The accident takes place always at the same point in the installation process of the firmware.

  You can try to download directly from here for some removable on another machine media (in case your mac acting upwards)? http://FTP.HP.com/pub/softlib/software12/COL34888/LJ-86474-6/CP1520_Series_FW_Update-20111215.dmg

  The above firmware update utility is for the HP Color LaserJet Pro CP1520 series.

  This utility runs on Mac OS X 10.5, Mac OS X 10.6, Mac OS X.

  The utility can be used with a USB connection or network. Don't forget to use the utility to update the firmware which is specific to your model of printer.

  This update is recommended for series HP Color LaserJet Pro CP1520 who has a firmware version prior 20110329.

  This utility updates the printer firmware version 20110329 (March 29, 2011).

  The version of the firmware of the "Setup Menu"-> "Service"-> "Firmware Datecode.

• LaserJet 4250dtsnl Firmware update failed, now shows "Send Update"

  I was updating several of our printers in a network using HP WebJet Admin last night and there was a (LaserJet 4250dtsnl - Q5404A) printer that had active print jobs that runs through, as the firmware has been updated.  In the WJA interface, the upgrade of the firmware hung 99% and the message on the control panel of the printer showed performing the upgrade.  Today we power cycle the printer.

  He is (was) a 500/stapler connected (Q2443B) sheet that displays now an orange light and we have received a message on the sign indicating 'FIRMWARE CORRUPT ACCESSORRY externally' and ' RETURN '.  I tried to update the firmware using HOSTS (although he showed that he already had the correct version).  Same result, hanged 99%.

  Power cycling the device and tried to update via USB using the easy update utility.  Once again, same result.  Engine turned off, unplugged the stacker, pulled the power cord plugged in, and the only message on the screen was 'return Upgrade.  I tried once more to send the update via the USB port, but the message "Upgrade to return" remains.

  I am able to print test pages, so the printing functionality seems to work, but I did have the chance to test with a variety of documents.

  As I wrote this, I found another thread that says: "go to peripheral configuration, system configuration, ramdisk, set it to Off" and try to update the firmware again to remove the message "Upgrade to return" (http://h30499.www3.hp.com/t5/Printers-LaserJet/Laserjet-4250-resend-update-after-firmware-upgrade/m-...).  I wonder if this can fix the damaged electric stackers.  Should I reconnect the electric Stacker before you make this correction, or anyone has any other suggestions?

  Thank you.

  While I did not set the stapler/bin, I was able to get rid of the message "Update of return" by the following steps:

  Turn the printer off
  Power to the printer, and when departures memory counting, press and hold the Stop button
  Wait until all three lights come on

  Press the green check button, then press the Menu key
  Scroll to clear all the errors of the RFU and press the green check button twice
  Turning the printer off, wait 10 seconds, then turn on the printer
  The poster printer now ready, but to be on the safe side, I did upgrade the firmware again via the USB port.

  Problem solved.

• HP LaserJet 1518ni - Firmware update does nothing

  Hello people

  I'm trying to upgrade my HP LaserJet 1518ni to the latest Firmware (2013-11-08, Version20130923, 4.22 M).

  My current firmware datecode is: 20120110

  I went here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3422472

  Downloaded the file CP1510_Series_FW_Update - 20130923.exe

  Firewall turned and AntVirus OFF, ran the executable with administrative privileges - he says he finds the printer and I see a progress bar and also the smiley at the end. But the printer is impressed and shows just "Ready" on the LCD screen, nothing has changed: files does simply nothing.

  Tried via IP Port as well as USB on another PC, same effect.

  What's not?

  Where are the good old. RFU file that I just can TFTP at the printer...?

  Thank you

  Thomas

  HI Jamieson et al.

  OK, I solved it: the HP printer driver installed you need to update the firmware with the HP tool.

  Inbox drivers using windows will not allow the tool to work.

  As soon as I installed the HP Universal print driver I got it to work.

  Would be easy for the firmware tool check, if 1) it comes to the printer 2) the sine qua non of a HP driver installed is given.

  Unfortunately the tool simply sends the one-way firmware to a device.

  Thanks anyway,

  Thomas

• 277dw Lasetjet MFP: Firmware Update for my Laserjet MFP 277dw

  This morning my printer has informed me of an update of the firmware, which naturally installed. The printer print is no longer because I have 3 party laser cartridges.  I had heard of tactics HP injet printers, but never thought that they would stoop so low just to force me to buy their cartridges, which for color laserjet, is very expensive.

  I currently have the following HP hardware:

  1. High-end ENVY Phoenix 850-065se Desktop (i7-5960 x)
  2. New portable high-end OMEN
  3. 277dw LaseJet MFP
  4. Chromebook 11

  I am also a partner HP started.

  How much chance do you think it is I will NEVER buy HP hardware again?

  If you use laser 3 rd-party cartridges, do NOT have the HP firmware updates.

  Find another thread to the M277 that seems to relate to yours:

  http://h30434.www3.HP.com/T5/LaserJet-printing/M277DW-supply-memory-error-all-cartridges/m-p/5766705/highlight/true#M294371

  The solution by the user in this one suggests a bad patch as opposed to a deliberate attempt by HP, third block laser cartridges.  It is more credible to me than what HP did with the OfficeJets.  He fixed in downgrading the firmware that atleast confirms that the problem is associated with firmware.

  I commented on another M252 thread on a similar power error message:

  http://h30434.www3.HP.com/T5/LaserJet-printing/how-to-revert-fix-recent-firmware-update-for-HP-colour/m-p/5809720#M297289

  I think its time to crush us this one and get a comment from HP support directly.  If you would be so kind as to contact HP directly through Chat or by phone, we can get an official and timely response.  Then share what you said with the rest of us.  The community can get the word out from there.

  I also found another thread dig deeper and providing a link to an old version of firmware, if you want to try it yourself:

  http://h30434.www3.HP.com/T5/LaserJet-printing/M277DW-supply-memory-error/m-p/5760229/highlight/true#M293984

• Misprints LaserJet 500 M551 after firmware update

  I recently updated the firmware on the M551 dn 500 laserjet printer.  I installed the update of the firmware successfully, but I keep is printed with characters on the pages 'trash '.  He randomally prints this way and is not consistent.  I don't have that happen after the upgrade.

  I updated the firmware twice in an attempt to erase mistakes without result.

  I did the format clean and complete part and I still get the same errors that occur.

  I tried the upgrade to the current pcl6 driver as well.

  I use windows xp and older windows programs.  This happens in the office software and software autodesk as well.

  I am ready to return to the previous update of the firmware if possible.  I had problems with this firmware update so (printer refuses to print after a period of time), but I'm ready to come back just so that I can keep the waste of paper.

  I've attached an example of printed copies.

  Hi vbrown,

  I don't know what worm pcl6. you use, but try to drive perhaps PS

• color laserjet mfp m277dw pro: the new Firmware update

  My M277dw printer is automatically downloaded and installed a firmware update last night.

  The datecode on the printer now shows 20160606.

  The update took me by surprise because I was in the middle of a print session.

  Is it a real update?  If yes where can I find the notes that this version is not on the driver download page.

  @Robert069,

  All the firmware update are directly from the HP Server. They are automatic HP where to connect to the network.

  I don't have details of which fixed the update but not yet posted to the customer of the USB. The update last two were to improve the network connection and built-in web server looks like.

  You don't have to worry about melware on the printer, as melware is a computer-based software. Can not be installed on printers.  Remember to update the printer firmware are link updateing the BIOS on a computer.

  I hope this helps.

• HP Laserjet M1217nfw: Cannot update firmware HP Laserjet M1217nfw

  I've identified that HP has a newer firmward for my HP LJ M1217nfw.  My config report says that my firmware is 20130912 and the HP site has a 20150405 version.

  I found and downloaded the firmware update utility. I have install and send the Firmware. The printer says 'Programming' but then a message appears on the computer saying he cannot communicate with the printer (it was printing fine before you start the process). Finally the LCD screen on the printer returns to the ready, but the config page print still with the old date of the firmware.

  What is going on? Is there a way to solve this?

  Not too sure, but you you better make sure you do not perform an update of the firmware wireless. You must use a cable.

• Firmware Update Notification printers to Laser - real or HOAX?

  I received an email listed starting from: Hewlett-Packard [email protected] that indicates an update of the firmware is strongly recommended for laser printers prevent malicious activity. I find nothing at HP about it. Is this update for real? I don't want to click on the link (Firmware Update enabled by default at this link):
  http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03102449). ) and end up being a victim of phishing or worse. Here is the content of the email:

  Dear Dear customer of HP's LaserJet.

  HP recently announced the possibility of a certain type of
  unauthorized access to some HP LaserJet printers. The potential
  This unauthorized access is for peripheral on a LaserJet
  Public Internet without a firewall, or for LaserJet devices in one
  private network, if a malicious effort is made by a party on the
  private network to change the firmware of the device.

  If no customer has reported to access HP, HP has
  built a firmware update to minimize this problem. To get the
  latest firmware for your product, access bulletin HPSBPI02728
  SSRT100692 - some printers HP and HP Digital Sender, remote control
  Firmware update enabled by default at this link:
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03102449

  Then:
  1. find your product in the table
  2. If an update is available, you can click on the embedded link.
  It will take you directly to the web page where the Firmware
  update is available.

  Update the firmware of your product by following the instructions included
  in the Readme file for the firmware image. If you are a HP
  Managed Print Service customer, please contact your managed
  provider of printing services, which cannot install the update of the firmware
  For you.

  Because the safety of our customers is paramount to
  HP, we reiterate our recommendation to follow best practices for
  mounting devices. This includes placing them behind a firewall printers
  and, when possible, firmware remotely disabling download capabilities
  printers exposed.
  Additional information is available at http://www.hp.com/go/secureprinting

  Hello:

  I would contact HP technical support on this issue, if you are not very sure.

  Support bulletin seems legit to me.

  As I was connected the HP support Forum, this bulletin web page acknowledged that I signed.

  If it wasn't true, I doubt that this would have been possible, as these pages are tightly linked through HP Passport sign in System.

  Also look at the list of models to ensure that yours needs updating.

  If you decide to run the update, make sure that you follow all the procedures to the letter.

  An update of the firmware which has gone wrong will permanently damage your printer and most likely makes it unusable.

  Paul

• P1102w firmware update for XP required

  It seems that the P1102w needs a firmware update to run via Apple's AirPrint with several iPads & iPhones the rest of my family use.

  (Don't know why HP can't provide a new printer with the current version of firmare which is expired less than 18 months, but who can fathom the means of Silicon Valley?)

  So, will someone please tell me how to upgrade firmware ASAP?

  I don't see anywhere any software development of firmware for XP on the HPs support Web site.

  My PC is runnning Windows XP 32.

  There is a document containing instructions to update the firmware of the P1102w.  The document can be accessed here.

  The document advises one to download the update of the firmware from the downloads page, but none are listed.  However, I could find the update through the update of the firmware of laserjet webpage.

  Click here to access the page of the laserjet firmware update.  The P1102w is listed as a series Laserjet P1100.  I hope this helps.

• firmware update

  I tried updating my two cinema Display on my iMac (27 inch, end 2013) iMac Intel Core i7 3.5 GHz 32 GB 1600 MHz DDR3 NVIDIA GeForce GTX 775 M 2048 MB tons of time, using all possibilities, but unfortunately not worked.

  What is happening with this firmware?

  Hello RUBENSCOSTA,

  Thanks for this info and choosing the communities Support from Apple. I know how important to get your Cinema Display works again is for you!

  If I understand correctly, you are unable to update the firmware on the LED Cinema Display. I would like to try the following steps to get these working again:

  1 make sure that your iMac has all available firmware updates installed as well:

  On the updates of the EFI and SMC firmware for Mac computers with Intel processor

  2. try to follow the process in this article on the updating of the LED Cinema Display Monitor:

  On the 27-inch LED Cinema Display Software Update 1.0

  3. If you're still having problems, you can see the general troubleshooting guide:

  Get help with your Apple Cinema Display Monitor

  See you soon!

• Airport Express firmware update

  I had a Firmware Update for my Airport Express.

  How can I update? I can only choose ignore, do not to update. In other words, what I did now.

  Zu-updates information to update Firmware as airport-Basisstationen - Apple Support

  It's funny. I think it's a bug.

  Airport-Dienstprogramm 6.3.6 on El Capitan

  "You are not allowed to create or update this content" - funny too.

  This firmware it works now?

  What model is the Express?

  You can do it manually even if it is a bit complicated.

  Re: proxy server annoy 7.6.7 update?

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.