LaserJet M1319f: HP Laserjet M1319f MFP Scaner not ongoing analysis pages.

Similar Questions

• HP Laserjet M1319F MFP is not able to scan under Windows 7 (64-bit at home)

  I have a Windows 7 Home Premium 64 - bit HP Pavilion connected to the HP Laserjet M1319F MFP. All the functions of the printer worked so far.

  The scan function has stopped working. Here are the steps and errors that I see:
  1. I load the sheet from which I scanned in the printer and the printer displays
  2. I start Windows Fax and Scan dialog box and press the button new scanning
  3. New Scan, dialog and I press the Scan button
  4. the printer begins to feed the sheet and displays
  5. immediately after the message that the printer displays the message
  6. a message with the dialog box titled error, and after I press OK another dialog box with Windows Fax and Scan title pop-up.
  I did the following steps to try to fix the scan:
  1 uninstalled the printer and it added. Scan still does not work.
  2. I downloaded the latest driver and firmware on HP site updates and installed on the PC and on the printer firmware. I had success on the driver and firmware of the facilities. Scan still does not work.
  3. I ran PC-Doctor hardware diagnostics on the printing device and got a status of success. The Test page printed successfully.
  4. I am able to print documents, but will not scan. I tried both ways - single and multiple - sheets. Scan still does not work.
  Any suggestion would be appreciated.

  Hi ApolloWZ,

  Thanks for your quick response.

  In the meantime, I found the solution to my problem, so I thought I'd share it here for others.

  I found the answer here:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/can-t-scan-from-M1536dnf-after-reformatting-computers/TD-p/3914820

  I will cut & paste the answer below, in which case the link above doesn't work at some point:

  (1) on the computer target under the normal user account, press Start, in the search box type services.msc. Right click on the program that appears and select "Run as Administrator". Enter your user password or click on next to go to the UAC popup, if necessary.
  (2) locate the service called "Windows Image Acquisition (WIA)" and double-click it.
  3) click the connection tab, and then change this service to log on under a Local System account. Click here to allow the service to interact with desktop. And then click OK.
  (4) reboot (or if you really don't want to restart & know what you're doing, you can just stop & restart the WIA service twice)

  See you soon,.

  Gary.

• New Laserjet M1212nf MFP does not copy or scan. Not taking in the documents document feeder

  Product: Laserjet M1212nf MFP

  OS: Windows Vista 32-bit, Windows 7 64 bit

  USB 2.0 connection

  Scan software Readiris Pro

  Have installed a new Laserjet M1212nf MFP. When I send a document to print, it produces an impression outside, well wrapped on the ends because of the heat.

  The copy function and the scanner or never do not produce print outs. The bar with light moves on the copy/scan with the light area, but no print out.

  In addition, for the copier/scanner document feeder does not pages.

  I installed several LaserJet using a number of operating systems in the past.

  Best wishes

  Shanefg

  Hi Shane,

  Thank you for the additional information. You experience a hardware problem with the scanner in the printer mechanism. The following additional options depending on your current status of the warranty on this printer.

  In the guarantee:

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Out-of-warranty options:

  http://support.HP.com/us-en/document/c02652026

• HP Color LaserJet M277dw MFP: HP Color LaserJet M277dw MFP - may not wake from sleep

  Hello

  This has been put to death elsewhere, but I have not found a solution that works.

  I'm close to return this product, but thought I'd have one last try here.

  I have a brand new HP Color LaserJet M277dw MFP. It works very well. Apart from one thing, when the printer goes into sleep mode, I can't he wakes again and accept print jobs. Sometimes go to the printer by pressing the touch screen and turning market working again, but if I just send a print job if it is 'sleep' mode, it prints ever.

  Printer is connected via wifi only, no other method of connection.

  Printer is assigned a static IP address 192.168.1.105

  DHCP is disabled in the printer

  IPv6 is disabled in the printer.

  IP address of the router is 192.168.1.1

  DHCP is enabled in the router with a starting address of the 192.168.1.150 and an address to 192.168.1.199

  DNS primary and secondary 8.8.8.8. and 8.8.4.4 assigned in the printer.

  I've updated the firmware inside the printer to the most recent version, as well as pilots of Windows 10.

  I tried to reset everything and turning everything (including the printer itself, the router and all other PCs, laptops, tablets, phones etc...) and the new, but no joy.

  Can anyone help please?

  Thanks and greetings

  Nick

  I ran the HP print and scan doctor software, and this update the firmware datecode 20160606 printers.

  So far, that * seems * fixed the awakening of sleep problem. Fingers crossed!

  Detective Conan.

  Thank you

  Nick

• HP Laserjet M9050 MFP: Scan error Code 30.01.16

  I have a HP Laserjet M9050 MFP Firmware: 51.051.4

  The printer was woking fine so far, but played upward...

  I get an error Scan on the screen 30.01.16 Code, have searched online and this indicates that the scanner ADF need of recalibration.

  Normally the 30.01.16 error code will remain on the screen, but if I take off the cable behind the scanner it-displayed meaning I can access the control panel and enter the menu etc.

  I tried to re - calibrate the, but it doesn't seem to work, someone has another idea about what it takes to solve this problem.

  Hahaha...

  Be sure to save the configuration when you do something.

  Well, the solutions were:

  (1) printer tour

  (2) remove trainer card and unplug the hard drive

  (3) re - connect trainer Board and open the ADF tray, printer

  4) go to Services, then calibration width ADF and calibrate as on-screen instructions.

  (5) DON'T FORGET TO SAVE THE SETTINGS.

  (6) turn on the printer and remove trainer card and reconnect the hard drive.

  (7) once who did everything turn on the printer again, and everything should work without an error.

  Note: If you get the error when the cable step 3/4 remove scanner then plug back in.

  Fixed and working again.

  This can close close...

• HP Color LaserJet M477fnw MFP: Scan to computer button disappeared

  Hello, I saw similar comments of the same issue, but none with a solution.  The closest is this: http://h30434.www3.hp.com/t5/LaserJet-Printing/How-to-fix-missing-quot-scan-to-computer-quot-touchsc...

  Problem: We have a new printer that we have Setup.  During the installation process, on the touch screen, provided the message to "Scan to Computer".  We used the option to make sure it worked and took part in the computer we wanted.  We restarted the printer, and the option is now missing!  The option "Scan to Computer" has completely disappeared.  Where it was once a touchscreen button / option, no longer exists.

  Printer: HP Color LaserJet M477fnw MFP

  OS: Mac OS X 10.8.xx

  I downloaded the firmware update, but that doesn't work either.  I tried using the verification of updates of the touch screen of the printer, it can never connect.  I connected to the internet, I connected directly on a hard line, still no connection.  I literally just bought this printer yesterday, with a 2-year service plan, drove an hour to the next closest store that had it in stock and it gives me nothing else problems.

  I have unplugged and waited a minute.

  I've uninstalled and reinstalled the printer and the software from my computer.

  I'm out of ideas.

  Hello @gfrd3489

  If you talked about scanning to the icon post from work or option after pressing the icon of the scan on the printer itself that one has been dropped by HP since she had so many questions with that like on some devices will only scan flat and not of ADF.

  If you notice you still have other options such as scanning to USB key, scan to e-mail or scan in network on the printer folder of are next to the HP scanning app on the PC for windows and mac

  Devices most recent are not supposed to have this option on the first place and the firmware and normal updates which will remove devices more alumni who have it

  There were a few M477 which were sold to vendors when it first came out which was which, but as soon as he gets the first update will be deleted

  hope that clarifies the question

• LaserJet m127fw mfp: hp laserjet m127fw mfp can not sweep

  Hello

  My laserjet m127fw mfp scanner suddenly stop working without any reason. The printer is connected to the network. I tried to uninstall the drivers and the program, restart count it and then reinstall the latest driver from HP and it stil didn't work.  I can only print from the printer but cannot scan her. Every time when I try to scan, I get an error message saying "Scanner communication cannot be established" I also tried to scan to connect directly to the printer via a USB port and received the same error message. Please help and advice!

  Sincerely,

  Hello

  Hello!

  Welcome to HP's Forums a great way to get help.

  Thanks for your post. I see you have scanning issues with this printer. (LaserJet MFP Pro m127fw)

  Until we start, I would need some information to help you best. Please let me know the operating system of the computer.

  You can also check if the printer will copy correctly, to isolate the problem. (whether it is software or hardware related)

  Please reply to this post.

  Take care and have a nice day.

• LaserJet M1217 MFP nfw: Chromebook nfw Laserjet M1217 MFP scanning

  I have a HP Chromebook and Laserjet M1217 nfw MFP all-in-one printer.  I downloaded the software updated to the printer and print without problem.  However, I can't scan documents.  When I enter the IP address of the printer, there is no tab "scan."  How to scan the nfw Laserjet M1217 MFP by using my Chromebook?

  Hello

  We have checked and there is no Webscan for this model of Laserjet, scanning all is software driven UI.

  Thank you.

• My HP Professional LaserJet M1132 MFP is not printed or it in offline mode

  My print HP LaserJet Professional M1132 MFP is not & I think it is in offline mode. I don't know what to do. I look on google, but the things that you say do not work. I stay in my computer, & I plug my acdpeter printer right but it is not the printer. If there of one thing I can do to make online or at least to make fine printer? My WI - FI connection IS good. There are bad noathing. I think that it to the printer. Also troubleshooting does not idenfity the proger.

  My printer is now working and print fine. I just wait for a few days and that he just start Work.Anyways thanks for the help.

• HP LaserJet M1132 MFP prints not a remote desktop

  Hello

  I have a MFP HP LaserJet M1132 (number of product CE847A) connected to a PC (MS Windows XP Home Edition + SP3) via the USB port. There is no problem with the printer. However, when using Remote Desktop connection (it is set to use the resources and local facilities, or in my case, printers and ports series) on the server (MS Windows Server 2008 R2), I can't even print a test of a remote office page.

  Error message: "print a test page failed. You want to display a tool to solve printing problems to get help? »

  But it does not anywhere as planned is access to the internet, and I've not had a MS Windows Server 2008 R2.
  The same error is for the HP LaserJet M1120n MFP.

  On my PC I installed another printer - old OKI ML321 (needle) connected to a PC using LPT cable and network printer Konica Minolta 1690MF (in another room). In two of these printers can easily print a test of a remote office page.

  Please help me.

  Thank you for your interest.
  The situation is a little different from the image. Windows Server 2008 R2 is available across the WAN. LAN is connected to the PC-1, 2 - PC and printer Konica Minolta. HP LaserJet M1120n MFP is connected through the USB port of the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC - 1 has access to Konica Minolta printer via the local network. PC - 2 also has access to Konica Minolta printer via the local network. PC - 2 is also available for PC-1 HP and OKI.

  It seems to me that I found the explanation for printing problems - some of 'my' printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:

  http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800D-2d9f-1f0c-225cabd6838e&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8DBB-9e95-11dc-3575d569acc2&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8D51-DCBB-7664cbc17a89&bCatID=1282

  I think I can close the topic.

  (translated from Polish into English using Google translator)

• M477fnw LaserJet Pro MFP: Print not offline

  The printer is set up wireless.

  Installed correctly according to the test page.  Can't pring offline... Word documents, articles, etc.  Print a copy of my email, newsletter articles, nothing online.  Technical support HP and a nephew, working for a COMPUTER company ran Diagnostics remotely and both agree with the test page, that there is nothing wrong and I should be able to print off line.  I tried to reinstall a few times and with options of different configuration, but always using the supplied with the printer setup disk.  The installation disc is updated according to the option ' check for updates ' during installation.

  Technology HP said it's probably because the IP addresses of the printer and the pc are different.  Printer laser HP 3 year has a similar IP address as the new printer and it works fine on my wireless network.

  Before buying this LaserJet, I could not find a review for this product so no known problems to watch out for.

  Does anyone have a suggestion (s)?   Thank you.

  Just discovered this LaserJet Pro M4777fnw MFP does not print the Word documents, PDF format only.  Will Support HP drop a line of detail so the next time, they will know the answer.

  The problem is solved!

• M225dw MFP HP LaserJet Pro: Save Scan not responding

  Once a document is scanned, I click on save, start and go through the correct folder and it (no longer save).

  I need help!  Any ideas?

  Hi LolaTheCat,

  Thank you for exploring the HP Support forums for a solution to your problem of scanning.

  I understand that you use a M225 MFP HP LaserJet Pro with a PC of Windows 8.1, and the 'Save' button became unresponsive. I would like to help with that.

  I would like to begin by downloading and running the tool HP Print and Scan Doctor. This tool can diagnose and solve many problems of printer software.

  Please let me know if that solves the problem, or if you need assistance.

• LaserJet M1212nf MFP: Scanning does not... Once again.

  You are God * beep * serious? I've lost my patience with this thing. Used to scan via USB, but the part on the printer pulled plug and pulling repeatedly. Then connected by Ethernet cable. Would not scan. It turns out that the printer must be plugged into a wall outlet instead of the power bar. Very well.

  And now, it does not analyse new, but this time I literally haven't touched it since the last time once I plugged it in the wall. The device is in offline mode on my computer but can still print documents, but it won't scan. I checked the power cord of the printer and it is not loose at each end. All my drivers must be current.

  Well, this should allow you to analyze:

  1. If the printer is connected via USB cable to your PC, delete.
  2. Click on start and open devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons of your printer listed.
  6. Download and install the latest drivers by clicking on this link.

  Please let me know the results after doing the above.

• LaserJet CM2320fxi MFP scan option not available with windows 7?

  I tried to completely uninstall the printer and drivers by the management of printing, but when I reinstall I'm still not able to see the scan option.

  I found this fix, but it is not helpful at all.  I am very few clear on how to run the solution. What is the air cleaner and where do you get?

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=...

  Well, I have solved the problem by forcing a sweep of windows & scan fax.  I found this as a work-around and I just try the scanner then, and it worked.  For now, the question has corrected itself, if all goes well it stays this way!

• Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.

  I can use WIndows 10 if the fix is available for this OS.

  I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.

  Any help would be greatly appreciated.

  Thank you

  Hello

  Install the following firmware for your printer, and then look for a difference:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/swItemId/kJ-149905-2

  Kind regards

  Shlomi