LaserJet M1536dnf MFP: It won't work

I use this printer on a LAN port.  It appears in the network when I search for it.

When I double-click the icon it installs automatically 2 drivers.  One of them has not installed whose name appeared as 'WSD printer driver' (something like that).

It is strange because I have installed successfully on the other PC that is sharing the same network.  No matter how many times I reboot this computer, or remove and reinstall the printer in control panel it just will not work.

More suggestion on what can I do?

Hey @penguin97,

Welcome to the Forums of HP Support! I hope you enjoy your stay here.

I understand that you have some problems with your Windows 7 PC printing on your printer LaserJet M1536dnf. I can help you with that.

Here's what we will do:

  1. If you have any software associated with your printer on this PC, uninstall it.
  2. Click on start and devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons printer listed.
  6. Automatically search for updates of Windows 7. Install all updates, not only the critical updates.
  7. Restart your PC.
  8. Download and install the latest drivers by clicking on this link.

At this point, you should be able to print. If not, please let me know what happened following my directions.

Please let me know if you are able to print or if you have other questions. If not, have a great weekend!

If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

Tags: HP Printers

Similar Questions

  • HP LaserJet M1536dnf MFP stores the faxes to be sent the

    The company that I work has two HP LaserJet M1536dnf MFP Copier/printers-faxes. They are configured as basically the same that each related to its own line of ananlog fax. One of the machines is a continuous problem where it starts to store faxes instead of sending them.

    I went through all the HP troubleshooting documents. All settings have been verified. Firmware has been updated to the latest version. When I run the fax test via the service menu, always happens on all points.

    The machine receives faxes fine, but when you try to send a fax, it stores and never sends it. Following the troubleshooting documents HP, 02/11/12 I restored by default. After that, the machine was able to send faxes normally do not their storage. On 09/11/12 machine began to store faxes rather than send them again. Today, 15/11/12 I restored default again, and the machine is able to send faxes again.

    I have not the time to be constantly dealing with this issue. Why does the machine start storing faxes instead of sending them? How to prevent it from recurring? Should the machine be returned? Please do not direct me to a generic help document that I have already read. Thank you.

    I would contact HP directly on it. It may need to be replaced, or it may just need some deeper resets. Their Laserjet experts know that go with this problem. I would wait until the problem returns to the top to call, because they will tell you to do if you call while it works very well. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

    HP Technical Support call case form:
    http://goo.GL/w7Hgh

  • HP LaserJet M1536dnf MFP responds automatically faxes

    My new HP LaserJet M1536dnf MFP does not automatically fax calls.  I don't have a phone hooked or a voice mail/answering machine.  "Answer Mode is"Auto".

    We use an analog converter to connect to our internal digital VOIP phone system.  Prior MFP which was connected has not had problems with answering machine/printing faxes.

    I can see "Incoming" call on the screen, but it just rings and rings.  If you press the button "Start Fax" when it rings, then he will proceed to the connection and receive it, it finally drops the call.  It's not good to see many faxes come when the office is closed or otherwise unattended.

    I tried setting "Fax / such", but that no longer works.

    Help, please!

    Thank you very much!!!

    Hi @DW - OH,.

    I see by your post that faxes will not come by when it is set to auto or Fax / Tel, but manually, you can receive the fax. I can help you with this.

    Update the firmware of the printer.

    HP LaserJet Pro M1536dnf multifunction printer drivers.

    Select your operating system, click Next, click the link for the firmware.

    Please check your messages for the reset of the printer, I saw that solve this problem before.
    In the forum next to your handle name simply click on the envelope to see.

    Good day!
    Thank you.

  • Drivers to be used on networked computers that are not directly connected to the HP Laserjet M1536dnf MFP

    Hi, I had problems connecting to computers on the network for printer. The printer is HP LaserJet Pro M1536dnf MFP. The computer that is connected to the printer directly via USB is fine. I downloaded solution complete driver installation on the site of hp, them and everything's fine. the problem is with the computers on the network, they cannot detect even the computer to add printer. And I have enabled file sharing and printer sharing advanced options of sharing on all computers. I also tried to install the same drivers I used on the local computer on the network computers, but its does not work. Please kindly advise me on which particular driver should I use or the solution.

    for this one, there was a simple solution... I forgot one small thing. After the installation of the complete solution from hp printer drivers on the computer connected to the printer via the usb port you then go to control panel > view devices and printers > click with the right button on active printer installed > printer properties > sharing > click on the list to the Director. that allows other computers on the network to view the printers.  was a bit stupid coz the solution was so simple.

  • HP LaserJet M1536dnf MFP

    I have a MFP HP LaserJet M1536dnf who has E-Print.

    My internet hub is in another room for my printer so they are not connected.

    Is there anyway I can print wirelessely without connect via USB to the computer or connect the printer to the hub?

    Any help would be great.

    Thank you

    Tracy

    Hello Tracy,.

    The requested ePrint service a network connection with internet access, connection via USB to a computer is not supported for ePring, a wireless network connection is not supported for the printer itself.

    You can connect to hub you using an Ethernet cable so ensure it have access to the internet, otherwise ePrint will not work.

    You can find out more information on ePrint in the following document:

    http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903

    Shlomi

  • LaserJet M1536dnf MFP: LaserJet M1536 don't not printing Mac laptop, all lit LEDs under LCD

    My LaserJet M1536 suddenly no longer print from my Mac laptop. And Yes, I downloaded the HP printer from the Mac App Store software was last updated.

    Under the LCD of the printer are three lights that stay on, even after that I power on and off the printer (the LEDs are green, the orange exclamation point and the orange point then). I don't know that the fact that all three LEDs remaining on the means, but it seems to be indicating a problem exists.

    Please help with advice to rectify or isolate the problem at least.  Thanks in advance.

    Do a google search, but the price will be high.  You can try a company call metrofuser.com because they can get a better price.  Good luck.

  • HP Laserjet M1536dnf MFP / Installation on SP3 Win XP x 86

    After a long struggle and without success, I decided to post my problem here. During the installation of the drivers and scanning HP everything goes OK until step "Connect a device" appears. After several minutes to wait for a window with the fatal error message appear, indicating that the product may not be installed. Installation was cancelled. For installation, an original CD as well as the latest version of the drivers were used. The same result without success. In addition, troubleshooting of HP has been applied, which means that all startup applications and services with the exception of Windows services and applications have been disabled. Then after restarting a facility began with the same result. One last thing to add. During a connection device, Windows installs drivers. And the only available option is an impression (copy worked, of course, all the time). I would be grateful for the help, because no more only solutions.

    P.S., HP Print and doctor Scan has been tried. Scan test was chosen. The program has lead me to the HP support on the first try "pilot" sorry for the few grammar errors

    http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/Laser-Jet-1536-DNF-installation-problem/m-p/1087889#M43766

    I found this on a different post that addresses the same issue & point.  I tried on mine and it worked the first time.  Try it and give it the Kuddos.

  • HP Web Jetadmin 10.3 and LaserJet M1536dnf MFP communication error

    Hello!

    I followed http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=... , but no help.

    Any ideas?

    Thank you more, Alar.

    Hi and thanks!

    I have it. I got off WS-Discovery. =) Earlier, I corrected which... WJA has done well.

    Thank you more, Alar.

  • LaserJet m127fw mfp: hp laserjet m127fw mfp can not sweep

    Hello

    My laserjet m127fw mfp scanner suddenly stop working without any reason. The printer is connected to the network. I tried to uninstall the drivers and the program, restart count it and then reinstall the latest driver from HP and it stil didn't work.  I can only print from the printer but cannot scan her. Every time when I try to scan, I get an error message saying "Scanner communication cannot be established" I also tried to scan to connect directly to the printer via a USB port and received the same error message. Please help and advice!

    Sincerely,

    Hello

    Hello!

    Welcome to HP's Forums a great way to get help.

    Thanks for your post. I see you have scanning issues with this printer. (LaserJet MFP Pro m127fw)

    Until we start, I would need some information to help you best. Please let me know the operating system of the computer.

    You can also check if the printer will copy correctly, to isolate the problem. (whether it is software or hardware related)

    Please reply to this post.

    Take care and have a nice day.

  • HP LaserJet M1536dnf copy of the automatic document feeder

    HP LaserJet M1536dnf MFP

    FW version: 20130114

    I load the paper in tray and press copy ADF on the front panel button.

    Once this UPM retrieves the document, it crosses all the way to scan and UPM returns to ready state without printing anything.

    Copy in the same way to scan flat ends with a scanned copy of printing as usual.

    I suspect that the problem of Firmware.

    Any help?

    Hi, Jason
    I think you forgot to mention what buttons I have to hold in the power of the UFM.
    I did re-init procedure (hold right + Cancel when power on) and reflashed latest firmware. It did not help.

    If I do a search with the ADF, the printer tries to print anything. UPM simply returns to the ready state after the end of the analysis.

    Update:

    It seems that I fixed it.

    I did the procedure exactly as Jason suggested, but when I checked whether the problem is resolved, UPM did the same, scanned and returned to the ready state without printing anything.

    After that I did hard reset again, then immediately I did again the procedure to reset internal memory

    Spoiler (Highlight to read)

    (Turn off the UPM, press front panel and hold right + Cancel buttons, power on UPM during their detention, let them go after the LCD displays "init memory" and wait as UPM to ready state.)
  • How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

    How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

    OS X El Capitan: revert to a previous version of OS X

  • Scan works only on Laserjet M1132 MFP

    I have a problem with scanning on Laserjet M1132 MFP. Print and copy works without problem. But when I try to analyse the scanning application crashes. It says busy and does nothing.

    My OS is Windows 7 64 bit, I tried to update the firmware, but that did not help with the problem. When I try to scan it says busy. In fact, you hear as if the scanner tried to analyze something, but the software does not move and repeat that he is busy.

    No clue as to what could be the problem?

    I found the problem. I had the printer connected to a USB cable for the previous printer (Laserjet 1020) and did not use the original supplied with the M1132MFP.  After I plugged the original cable scanner has started working.

  • Automatic document feeder stop working on printer HP M1536dnf MFP

    Hello.  The automatic of the document (BAA) on my all in one work suddenly quitting coppier.  I cleaned but still nothing.  When you set up a sheet of paper in the tray and it depresses the lever on the power head, he normally had a message like 'paper' on the LCD display.  Now, nothing.  I thought that the driver's head may have failed so I replaced it with a spare that I had but this diddnt help either.  I'm not sure why the ADF will not work, but it turns out quite invonvieiant for my work. If anyone has had this problem and if so, were you able to fix?  Thanks in advance.

    Model HP Laser Jet Pro M1536dnf MFP

    Hey @MarioFleecy,

    If the NVRAM reset on your product could not solve the problem with your ADF, then the next step would be to maintain the product that we have exhausted all the troubleshooting steps.

    I would recommend calling HP support and inform the agent of all the steps that we've come for troubleshooting. When you do that, you will be able to discuss what alternative options are available.

    HP Technical Support can be reached at the: 800-474-6836.

    If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    Worldwide contact HP

    Good luck!

  • ATI Mobility radeon HD 4500 series reported an error code 43 and he he had stopped working, so my printer Laserjet M1132 MFP had stoped printing.

    My computer said that ATI Mobility radeon HD 4500 series reported an error code 43 and he he had stopped working, so my printer Laserjet M1132 MFP had stoped printing. How can I make it work againg?

    SHELF MODEL: tm2-1010ea

    SERIAL NUMBER: CNU0290H5H

    Any required driver updates should come from your support site for PC manufacturers, HP? and not Ati or windows update

  • HP Color LaserJet CM1015 MFP: LaserJet CM1015 scanner does not work in Windows 10 (64-bit)

    I up graded to Windows (64-bit) 10 now the scanner on my HP Color LaserJet CM1015 MFP does not. I installed HP Universal print drivers, but apparently there is no include scanner drivers. Anyone know where I can get the drivers scanner?

    Thank you

    N ° 7

    Hi Lou,

    Basic scanning drivers built into the operating system only allow scan however a USB key.

    You can follow these steps to install the previous HP software by using compatibility mode:

    http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c03506225

    Vista drivers can be obtained directly from the following link:

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=1846081&swItemId=ly_51851_1&swEnvOid=2100

Maybe you are looking for

  • I call MS word for editing of a document html for Firefox.

    When I'm looking at a Web page in Firefox, I want to be able to rely on MS Word and get it with the content of the page so that I can edit it and save it locally.

  • Windows XP Prof. SP 3 stops itself

    I have Windows XP Prof SP3 and after I downloaded the latest updates for my computer to stop himself, then starts by itself. This happens not all the time. What is happening and how can this problem be fixed? Thank you.

  • Cybershot DSC-tx200v AVCHD 28 M conversion in an acceptable format for Mac

    I gave my wife this new camera before moving a week 3 cruise Down Under, it came together from high level on the quality of the movie, I have a MacPro w/IOS 10.6.8 (Snow Leopard) and will not download. I need a way to convert AVCHD 28 M in a less acc

  • Upgrade of the ultrabook.

    Laptop: HP SPECTRUM XT TOUCHSMART Model: 15-4000ee Product: C1S41EA   Recently I bought HP spectrum with i5 Proccesor. After awhile this Proccesor was not good enough for my work. I would like to know can I change Proccesor i7, or at least upgrading

  • disipaly choice of message with some initially assigned value

    HelloI created the choice of message using vo, now I need to put this choice of message with default values (which will come from the previous page).If the user wishes to set up another value, it needs to change based on the list of the values of cho