LaserJet M276nw MFP Color impossible to connect to Web Services, tried all the suggestions on the forum

I tried all the possible suggestions on the forum. I opened all the ports suggested by HP support on my Belkin of N600 router. DMZ has changed IP address on the printer. We even directly wired ethernet for printer, still cannot connect to Web Services. Now I have to wait until April 4 a technician to remind me. Everything else works fine. I can print wireless from my laptop & smartphone. Just can not access Web Services, oh & firmware is up-to-date on printer & router. We changed the DNS settings for 8.8.8.8 & 8.8.4.4.

Success! I had Verizon send me a new Modem/Router. The original was 10 years. Install a new one, did a "Restore Defaults" on the printer. Re-setup the wireless network wizard. Click Web Services & connected. Received my code from the printer. So, since I have a few towns away I figure I would try eprint. It worked... Woot woot!

Tags: HP Printers

Similar Questions

  • HP 7520: HP 7520 - impossible to activate Web Services - tried all of the solutions only in the last forums

    There are so many messages on this error dating yeas.  I tried all.  He used to work without any problems.  I tried the changes DNS 8.8.8.8 and 8.8.4.4, I reset my routers hundred times.  I entered my IP address in my browser and tried in this way.  No matter what I tried my Services Web will not work.  I have reset the factory settings and reinstalled the software on my computer to make sure that what was allowed.  Any other tips or thoughts?  Y at - it a proxy address that I can try?

    Hello

    From your PC, download and install the latest firmware below:

    http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5199462/swItemId/OJ-113641-5

    Once done, restart your printer and try to access Web Services, tht sould restore its functionality.

    Kind regards

    Shlomi

  • HP laptop: Hp 7520 all-in-one, unable to connect to web services when you are trying to scan to e-mail

    All of a sudden, I'm not able to scan to e-mail. I get the message unable to connect to Web services. One day he was working the next day this error message.
    THX!

    Hi @MMDH

    Welcome to the Forums of HP's Support. I understand that you are getting a server connection error when trying to scan to e-mail. I would like to help.

    There are two ways to go about this. It's either scanning to email app that is having the problem, or the printer it's impossible to connect to Web Services. It is easy to discover this. Tap the ePrint icon located in the upper left corner of the screen printers. If you get a server connection error, try the steps in this post troubleshooting by E - roq. Pro tips: Troubleshooting printing and scanning to Email Issues in e-all-in-one printers

    If you do not get a server connection error, then the problem is with the scanning to email app. To solve this, go to the Web Services menu (icon ePrint) and select settings, then remove Web services. You will return to the main menu/home. Press again the ePrint and enable Web Services. Once activated go to scanning to email App. Setting up scan to email. Send a test.

    I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

  • Photosmart HP 7520: HP Photosmart 7520 does not connect to web services

    My printer suddenly stopped connecting to the Web Services a month ago. I had already used web services successfully for two years, then my computer infected with malware and ruined a lot of things. I guess that it also affected the printer since it is at the same time ceases to function properly. I can print wireless very well all of my devices, but doesn't connect things like regular printable.

    I tried restaring the printer and the restoration of the default network printer. I also tried the steps listed in this forum http://h30434.www3.hp.com/t5/Inkjet-Printing/HP-Photosmart-7520-unable-to-connect-to-Web-Services/td...

    Hello

    Apologies for jumping!

    For the Photosmart 7520, the latest firmware must be installed in order to maintain a connection to Web Services.

    The firmware can be installed on any Windows PC via the following link:

    http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5199462/swItemId/OJ-113641-5

    Kind regards

    Shlomi

  • HP Color Laserjet M177FW MFP PRO cannot connect to web services

    I bought a HP Color Laserjet M177FW MFP PRO today and took me to the top. It can print and scan over wireless network. However, it cannot successfully connect to web services. I put the DNS numbers with google DNS addresses. I changed his IP address with manually. The IP address is unique. Normally it is not activate/remove webservices. But when I restart it, it can do for a few minutes. It may take an e-mail address, but it does not print any information sheet. When I try to print a sheet it says "Connection problem" in the first minutes, and later, he said "Connecting" and he expects, there is no error message. What am I supposed to do? Please help me.

    First of all thanks for your help. I solved my problem. After that I sent this message that I've updated my firmware printers and that does not solve the problem. I called HP customer service and they help me. We have solved the problem. My router was the reason for my problem. When I reset to factory settings, the problem disappeared. Thanks anyway. I want to share my solution. Maybe it helps others.

  • I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.

    I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.

    Hi vijaysampath, please make sure first that the date, time, and time zone are set correctly on your system. If this does not solve the problem (or it is already set correctly), a possible solution depends on different factors:

    • What is the error code indicated under Technical Details on the error page?

    in case the error code is equal to sec_error_unknown_issuer, please try to add an exception on the bottom of the error page to verify the certificate, as shown on the attached screenshot:

    • What information about the issuer of the certificate contain?

    Please take these two pieces of information. Thank you!

  • HP Photosmart 7520 unable to connect to Web Services

    It's used to work. Now when I try to scan to e-mail, I get all the way to where I choose it as a Document and then I get the message "unable to connect to web services. I printed out the results of the wireless network Test and everything looks great. Also, the Configuration of the network page is superb. My name network, says it is connected to the Internet. I was able to download the updates. IP address looks right.

    I have downloaded and run printing HP and doctor Scan and it crashed.

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: HPDiagnosticCoreUI.exe
    Application version: 3.1.0.25
    Application timestamp: 50fd3a60
    Fault Module name: dlbxtwds.ds
    Fault Module Version: 3.107.0.0
    Timestamp of Module error: 45df4cd1
    Exception code: c0000005
    Exception offset: 00004da2
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033
    Additional information 1: 0a9e
    More information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional information 3: 0a9e
    Additional information 4: 0a9e372d3b4ad19135b953a78882e789

    @shoikh

    I understand that your printer is not connected to the web services.  . I would first disconnect the router and the printer for about 1 minute.  I would plug the router first then the printer. I would then try to enable web services. If not successful, and you get the same error message. I'd follow these steps.

    1 obtain the IP address of your printer

    a. This can be done by pressing the icon on the printer wireless.

    2. Enter the printer's IP address in a browser.

    3. Select the tab network at the top of the page.

    4. on the left, select network.

    5. Select Network (IP) address

    6. select manual DNS server

    a. manual Preferred DNS should read 8.8.8.8

    b. alternate DNS server should read. 8.8.4.4

    7. Select apply you could get a fair warning select OK.

  • HP photosmart 7525: hp 7525 unable to connect to web services

    I recently bought an Imac, and now I can't get my hp 7525 to analyze correctly. It says unable to connect to web services. I tried to uninstall wirless and re-login.  Help, please!

    Hello

    My apologies for jumping.

    To add more, the latest firmware MUST be installed to maintain connectivity of the web services.

    Click on the configuration icon and select Tools, then print a printer status report.

    Locate the firmware listed, if it is a value lower than ELM1CN1607AR (see "BOLD" kinds) you will be required to update the firmware.

    Unfortunately, a Mac OS firmware update utility is not currently available, so you must use a Windows PC to update the printer:

    http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5286642/swItemId/OJ-113641-5

    Once obtained the latest firmware, try to use Web Services again and check for the difference.

    Kind regards

    Shlomi

  • Photosmart 7520: error message stating unable to connect to web services

    I'm scanning my printer and get error messages saying: unable to connect to web services check the internet access. I have access to the internet and also tried to get a new IP address manual. Keeps saying try again or enter proxy. Any ideas would be greatly appreciated.

    I have used this analysis before but just suddenly get these messages

    OK I try it and see if it works. Thank you

  • OfficeJet 6500 has Win7. Unable to connect to web services.

    I am trying to connect to Web Services because it has not been activated. The printer says that I have no connection, but the blue wireless light is on. It says that I need a proxy address. I have the printer status report, is this address here? I put in what I thought was the address and I wonder then to enter the proxy port; How will I know what it is? I seem to be long around in circles! Can anyone help please?

    Thanks for your reply. In fact, I had found that the problem is that the network driver was not installed from the disk.  After you have downloaded and installed, everything was OK.

  • HP photosmart 7520: HP photosmart 7520 unable to connect to web services

    I am also having this problem. I tried the solutions above. Can you also send the solution for me?

    drzman1

    Welcome to the Community Forum of HP.

    I don't know that to which you are referring - he could be the following:

    By PrintDoc Web services

    PhotoSmart 7520 does not connect to "Web Services"

    You can take a look at the suggestions already provided - they are likely valid for your situation.

    I can also offer you the following:

    Reset Web Services in ePrint printer

    • A method essentially provides the procedure that you find in PrintDocof wire,
    • Two method explains one more 'standard' reset Web Services approach.

    ============================================

    If you are in the USA or the Canada, you can call using Cloud Services.  I suspect that they can help during normal hours, but you can certainly call anytime and see if help is available:

    When to call HP Cloud Services and when to call HP Tech Support

    Click on the thumbs-up Kudos to say thank you!

    And... Click on accept as Solution when my answer provides a fix or a workaround!

    I am happy to provide assistance on behalf of HP. I do not work for HP.

  • PhotoSmart 7520 does not connect to "Web Services"

    My new PhotoSmart 7520 eAll-in-one printer will not connect to the "web services" today. Yesterday all top and work without any problem. Any app I try, it gives me the same error message.

    I run Win XP, the computer is connected to a wireless router with LAN feature. My printer is connected through the LAN. It was working fine yesterday. I did no changes since last night my computer system.

    I'm and turned on the printer and went to print simple Crusaders and received the message that it cannot connect to the 'Web Services '. Sever after tests, I check wireless settings and it shows that it works with an excellent signal strength. The Mac address shows as does the correct IP address for the printer.

    I checked my router to see if she was talking to the printer and everything was correct and functional. He showed increased activity with the printer wireless and work, the IP and Mac addresses were both correct.

    I followed several statements of SUPPORT from HP on the withdrawal and the reactivation of the Web abuse and got a print both times I tried it.

    Just before I downloaded HP Print and Scan, a small icon doctor appeared in the system tray in the lower right by saying that the computer analysis was not available. I ran the program doctor and ran the fixes to scan and print. The small icon disappeared, but I don't know what has been corrected.

    I turned the printer and on again at least twice. And I ran twice wireless configuration software.

    I can always connect to web services. I didn't have this problem when I set up the new printer Saturday. It worked fine until this morning.

    I'm not having any problem connecting to Internet with other software.

    We will define a static IP address and (most importanly) an external DNS for the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the gateway.
    -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    After that, you will have to redo 'Add printer' using the new IP address.

  • 7520e HP photosmart all-in-one: 7520e photosmart printer, does not connect to web services

    My printer was working fine, I share wireless between your desktop 8.1 windows 64-bit, windows 7 64 bit desktop and a windows 8.1 64-bit laptop, the latter is rarely used although it remains connected.

    Now, for some reason, my printer cannot connect to web services, it says an error has occurred, but you may still be able to use some of our services.

    I can connect to e print without any problems and it is connected to my network and wireless, I managed to send faxes, but only from the top of the charger of my printer page and not my computer, but at least it works, I can do a sheet of coverage since the fax software.

    Is this one of printers who had a few apps taken away from him? If so, this may be the problem with the web services.

    I uninstalled my software to print several times and re installed as has a HP technician but still no luck.

    Any ideas please.

    It print and scan very well although I have on my desktop windows 8.1 for the moment, I still have to

    install it on my windows desktop 7. Last night, when the technology installed on my windows desktop 7, he says you correctly it installed-windows 8.1 desktop, which of course was incorrect. I am the administrator on office computers, no homegroup, or user accounts, I just choose to share.

    Hello @emma22,

    Appreciate your efforts.

    Please check the picture below:

    Go to printer EWS - network - wireless - IpV4

    Click the manual IP address - suggest a manual IP address.

    Select the manual DNS, then choose 8.8.8.8 and 8.8.4.4

    Save the settings.

    Let me know how it goes.

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

  • HP 7520: Unable to connect to web services

    Get the unable to connect to web services, went through some previous discussions and no help. Uggghg

    Hi @Davem72,

    Thanks for your comments.

    We said that server problems have been resolved, can try you again to see if you are able to scan to e-mail?

    Have you been able to 'test' successfully once you have installed the scanning to E-mail?

    Thank you.

  • a 6500 - unable to connect to web services 710n

    I've been on web services and receive printing applications.  Suddenly, my apps stopped printing.  I tried all other solutions, reset default, etc. and still unable to connect to web services.  It requires a power of attorney.  I put the proxy of google 8.8.8.8 and 8.8.4.4 but these don't work.  What proxy & port should I use?

    Thanks for your help.

    Nancy

    Yes, my problem is solved.  Finally, I plugged the usb cord and was able to connect to web services.  I left alone and when I came back he had printed the eprint news.

    Thank you

    Nancy

Maybe you are looking for

  • Where can you find the "Screengrab!" button in Firefox 4?

    I've used the plugin "Screengrab!" for some time now. After you install Firefox 4, I have looked through and did not find the button where I could do snapshots of any Web site that I am.

  • Photosmart HP 6520 cannot connect to the server to use apps on printer

    Last night, I bought the printer, saved, set up with the apps on my phone and Tablet and connected it wireless. When I try using one of the applications on the screen it is written "server connection error:-1 there was a problem connecting to the ser

  • problem with solitaire spider

    I just installed windows 7 and it is great, I have a problem, when I go in lonely spider and to start to play ths screen begins to blink, it's as if it was costantly refreshing everything works fine, any idea please

  • Windows XP network

    I have 3 computers XP on a windows network. A computer is not authorized one of the shared folders/files anywhere, including himself. The answer is... is not accessible.  You might not have permission to use this network resource...  Not enough serve

  • I bought LR outright, but impossible to download twice.

    I bought LR outright and it downloaded onto my Mac. I would now like to download on my laptop that I will go soon but the link does not allow me. Why? I have bought outright and have the serial code to activate. Thank you