LaserJet MFP M277n Pro: Password reset

Hi all

I forgot my M277n Pro Laserjet admin password.

I would like to know if there is a way to reset the password even restore printer settings if necessary.

Having forgotten password, I am currently unable to change fax settings

Thanks in advance

Hi @xunhuan,

Welcome to the HP Forums!

I noticed that you are looking for a password reset for your HP Laserjet Pro M277n MFP printer. I am pleased to see that for you!

I sent you instructions in a private message. If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

I hope this helps!

Tags: HP Printers

Similar Questions

  • Color Laserjet MFP M177fw Pro: Cold Reset the printer

    What is the procedure for a cold reset / factory default for the HP Color Laserjet PRO M177fw MFP printer

    Hi @SkySoldier ,

    I see by your post you want than the reset of the printer. I'd love to help you.

    I can send you this information in a private message.
    In the forum next to your handle name simply click on the envelope to see.

    If you appreciate my efforts, please click on the button below the thumbs up. If there is anything else I can help you, let me know.

    Have a nice weekend!
    Thank you.

  • HP LaserJet MFP M277n Pro: fax interference

    Very often, when the printer is turned on and someone calls me on my landline phone fax signal generate much at the expense of my ears and those of my caller.   Why is this?

    Dear DocCottle,

    Thanks a lot for this.   The problem is only occasional, so I'll wait until the problem recurs.   However, I'm not sure you understand what it is you do.   For example, the modem is not the closest unit to the telephone jack, but that shouldn't make any difference because the cable attaching it is fine.   Fax cable is connected to the computer not the modem and the modem is connected to the computer and the phone jack.

    Best wishes.

  • Color LaserJet MFP M177fw Pro: Scan to Mac with Color LaserJet MFP M177fw Pro

    I bought and the latest drivers from hp installation a HP Color LaserJet Pro MFP M177fw. are downloaded and installed.

    I have a Mac and you connect wirelessly to the printer, which works very well. The Mac runs Yosemite 10.10.3

    My question is the digitization. There is no option for scanning anywhere, not on the small screen of the printer not on the usefulness of the printer or any where.

    Summer spend hours online to find an answer and is now well bored.

    I have already reset the disc printing, verified and repaired systems. Can not scan even with the options offered on the forums of hp using Apple caprure or preview. It seems that all these options include versions of OS X prior to Yosemite?

    I buy a multifunction printer that is not scan? I said to the saleswoman that I need a printer that can scan and airprint...

    Is it possible to scan to a mac at all with this printer? Any help?

    Hi @sa9494,

    I see that you have problems with scanning. I will definitely do my best to help you.

    Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
    Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Color LaserJet MFP M177fw Pro)

    If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

    Here is a screenshot of what it should look like. You have the scanning through top tab?

    I have also included a document for HP printers - scan with HP Software in OS X v10.10 Yosemite.

    Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

    Connect the printer with the USB cable, to see if you have the same results.

    Let me know.

    If you appreciate my efforts, please click on the "Thumbs up" button below.
    If you have any questions, please let me know what steps you have taken and the results. Thank you.

  • Color LaserJet MFP M277dw Pro: MFP M277dw unable to connect to wifi

    I just bought the Color LaserJet MFP M277dw Pro, and I can't connect to wifi. I have it connected via a USB cable and it works fine, it's just that I can't seem to connect to my wifi. The wifi seems fine, just connect my existing devices right (MacBook, iPhone, iPad). It finds the network, but it seems to expire when I put the password to connect.

    Hi @StephanieB2,

    Welcome to the Forums of HP Support! I understand that you are having problems with the networking of the printer. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    It's really weird that the printer is expire when you put the network password.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    You can also configure the printer on the wireless network, thanks to the Wi - Fi Direct connection.

    Tap the icon on the screen of the printer wireless.

    Select the Wi - Fi Direct connection.

    Turn it on, if it isn't already, and if there is a code it marks down.

    Then on the Mac, go to the airport icon and connect to the network printer. (Direct 69 HP Laserjet M277)

    If requested a code or password, put the one you noted.

    Then open Safari and type 192.168.223.1.

    He will be responsible: the printer Web server integrated.

    Click the network tab.

    On the left side of the window, select Wireless Network Configuration and fill your information.

    Apply the settings.

    Can connect you to your network.

    Then add the printer.

    Click on the Apple menu, click System Preferences.
    Scanners & printers, then click the plus sign +.

    Select the printer in the list.

    Select your printer from the drop-down and click on the Add button.

    Test the printer.

    If there is anything else I can help you, let me know. Thank you.

  • LaserJet MFP M127fw Pro: Easy Scan

    Hello

    I installed Easy Scan for my LaserJet MFP M127fw Pro on my iMac with OSX 10.11.1 and it worked fine until recently. I have not installed anything else or changed anything either, but when I run the program of the scan window does not appear and the program title bar is grey. Clicking on it will make the menus work and I can see the name of material, but even to open a new session of analysis does not show the real program window.

    Appreciate any help.

    Thank you very much

    I'm responding to and mark my own post as solved.

    The solution was simple and as always, was not a problem with the system as much as the operator...

    Somehow the corresponding window opened onto a second screen-deleting now. So I couldn't see it. Muppet.

    See you soon

    Stig

  • The windows firewall settings 7 HP LaserJet MFP M127fw Pro

    Just bought a LaserJet MFP M127fw Pro and having, I think, connection problems.

    A lot of net traffic, but nothing is ever done. I was wondering if the windows firewall is keeps something.

    Activation ePrint attempted, but that doesn't seem to do anything... 20 minutes of "wheels".

    and the printer goes to sleep...

    I am on a 3 MB connection WiFi ISP... I'm just too impatient?

    The firewall settings windows I have to do?

    Any ideas?

    Windows 7 Home Premium 64-bit

    Gigabyte Intel I7 W

    16 GB OF RAM

    Hi @CCcrider

    Welcome to the Forums of HP's Support.  I understand that you can not connect to web services on your LaserJet Pro M127fw printer.

    Please define Manual of the printer an IP address manually and DNS servers.  The steps on how to proceed can be found as "three Solution: the printer of the assign a static IP address" in the document of printer is not maintaining the wireless connection .  For the DNS primary please use 209.244.0.3 and auxiliary DNS, use 209.244.0.4.  These are public DNS servers of Level3.

    Please let me know the results.

  • HP laserjet MFP M125a pro: m125a

    Hello, I just bought a printer hp laserjet MFP M125a pro yesterday and during printing a document of 30 pages, I noticed the steam that comes out of the printer and the fumes forming. I have that it is quite normal on cheap laser printers that don't have a fan built in red (I assume that this printer has not), but again, this is not a cheap device. I'll try to get a new high of paper and see if it is still "steam". Does anyone have this problem with this printer?

    Thank you

    Bogdan Preda

    Hi @PredaBogdan,

    According to me, there is nothing to worry.

    HP has tested the performance of this product extensively, and this moisture is part of the normal operation of the product. The steam occurs because moisture condenses in the output area until the internal temperature reaches a level at which occurs without condensation.

    Thank you.

  • HP LaserJet MFP displayed as HP LaserJet MFP M127nw Pro M127fw Pro

    I have a MFP HP LaserJet Pro M127fw. When I added printer with application code specified printer was a HP LaserJet MFP M127nw Pro. Is this a problem? I use MOSX 10.11.6 on a MacAir

    Hey @pfedwards,

    Welcome to the Forums of HP Support!

    I see that your range of printers Laserjet M127fw shows as printer Laserjet M127nw in connected HP. If the printer prints correctly via ePrint, it of a typo and has no effect on the operation of the printer.

    Please let me know if that answers your question or resolve your problem. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • HP LaserJet MFP M127fw Pro: I need a free scanner software for management.

    My all-in-one printer-scanner is HP LaserJet MFP M127fw Pro.  I need a software that will manage the scan function.  I don't know what these programs are called to a category, but what they do is:

    1. save my settings,

    2 tell the scanner if I want to do an overview of the control program to display,

    3 Let me drag a border to select the section of the preview I want scanned.

    4 tell the scanner to scan,

    5. display the scanned image or document,

    6 ask if I have another page in the same document,

    7. save the image or document where I want, with a name I go,

    8. save images in different formats,

    9 save documents in the .docx format, .tif and a few other formats.

    10. documents of OCR.

    My operating system is Windows 10.  A free program that makes the most of these things would be great, but if you recommend a program that is not free, I'll buy it if I can't find a free good.

    Can anyone recommend such a program?

    Thank you.

    Hello

    Its specifications:

    • Scanning with HP LaserJet scan request or TWAIN - or WIA compatible application software
    • Windows Scan SW supports the file format: RAW (BMP), format PDF, TIFF, JPG, PNG.
    • Mac Scan SW supports the file format: TIFF, PNG, JPEG, JPEG-2000, PDF, PDF searchable, RTF, TXT

    Source: http://store.hp.com/wcsstore/hpusstore/pdf/cz183a.pdf

    Scanning HP for MAC software that comes with the printer can make 1, 2, 3, 4, 5, 6, 7, 8 and 9. To docx, you can convert form RTF or TXT formats. For 10, you may need to purchase.

    For Windows, try it please:

    http://free-OCR-to-Word.en.softonic.com/
    http://www.free-OCR.com/

    for Word:

    http://Office.Microsoft.com/en-AU/Word-Help/scan-and-edit-a-document-HA010254879.aspx

    Good luck.

  • Adjust the Date and time on the HP LaserJet MFP M127fn Pro?

    Hello

    Someone knows how to change the time on a LaserJet MFP M127fn Pro?

    Thanks in advance!

    Sean

    .

    Hi @SeanKaneFLA ,

    I see by your post that you would like to know how to change the date and time on the printer. I would like to help you today.

    This information was given by the manual on page 45. MFP LASERJET PRO.

    You may have configured these settings when you installed the software. You can configure these settings
    at any time by using the control of product or the HP Fax Setup Wizard panel.

    LCD control panel:
    1. on the product control panel, press the Setup button.
    2. Select the System Configuration and then select Date/time.
    3. Select the clock in 12-hour or 24-hour format.
    4. use the keypad to enter the current time and press the OK button.
    5 Select the date format.
    6 use the keypad to enter the current date and then press the OK button.
    7. Select Fax Setup, and then click Fax header.
    8 use the keypad to enter your fax number and press the OK button.
    NOTE: The maximum number of characters for the fax number is 20.
    9. use the keyboard to enter your company name or header and press the OK button.
    NOTE: The maximum number of characters for the fax header is 40.

    (Windows) HP Fax Setup Wizard

    1. click on start and then click programs.
    2. click HP, click the name of the product, and then click Fax Configuration Wizard.
    3. follow the on-screen instructions to configure fax settings.

    I hope this helps.

    Good day!
    Thank you.

  • scan to email on Color LaserJet MFP M177fw Pro

    I'm trying to download the printable 'Scan to Email' on my Color LaserJet MFP M177fw Pro, but he continues to throw an error?

    When I bought the printer (yesterday), I was told that I could put up to Scan in a document and have it automatically send as an e-mail message to a recipient.  How to achieve this?

    Thank you!

    Hi grahammccarthy,

    Welcome to the HP Support forums.  I understand that you want to know how to scan to email using your printer Laserjet Pro MFP M177fw.

    You don't mention the operating system that you use, so I've included links to all the operating systems supported on the way to analyze.  There is a section called "How to scan with HP software" and there you can find a subsection entitled "How to scan to email.  It is in the subsection, you will find the instructions you need to follow to be able to scan to email.

    How to perform a scan: Windows XP

    How to perform a scan: Windows Vista

    How to perform a scan: Windows 7

    How to perform a scan: Windows 8

    How to perform a scan: OS X v10.8

    How to perform a scan: OS X v10.9

  • HP LaserJet MFP M127fn Pro: Erro scanner 13

    OLA pessoal!

    Tenho uma impressora HP LaserJet MFP M127fn Pro than esta com o artifacts of calibrando e nao dessa messagem, quando fui driver o Software dela, no message beyond again appear Erro scanner 13. Alguem pode me help please!

    Hi @leguizamon147m,.

    Thanks for getting back to me with the good news! Have a great day!

    Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.
  • Color LaserJet MFP M177fw Pro: Color LaserJet MFP M177fw Pro

    I have Color LaserJet MFP M177fw Pro and it is stuck on print fax. I restart the printer and print the fax even. I found a post and supposed to go ware closes so I did. Printer is returned to normal. Got another fax and the printer to print fax. I tried firmware ubgrade once again without help. Toolbox program HP device says 'Printing Fax Page 1'

    Also I can't receive any new faxes and print to the device.

    Hi @DDTKS.

    Welcome to the FOrums of HP's Support. I understand that your Laserjet M177fw is stuck to print a fax. I would like to help.

    I sent you the steps to perform initialization of the NVRAM via private message.

    If you are unfamiliar with the operation of the function of private messages of the Forum, this posthas instructions.

  • M277n MFP: HP Color LaserJet MFP M277n I can't find the wireless connection

    I purshased Hp laserjet MFP M277n recently, but I'm unfortunately unable to connect WIFI itvia.

    I can only connect by cable.

    How can I activate the wireless to print by mobile or ipad or any other wireless device

    Thank you in advance...

Maybe you are looking for