LaserJet P1102w: Laserjet P1102w access to the wifi configuration

Similar Questions

• nondeterministic accessibility within the wifi network

  My configuration:

  -router with internet connection

  -laptop

  -BB 9000

  My goal:

  The BB device opens a TCP socket via wifi and laptop connects with this Jack.

  Actually I'm working and I am able to transfer data, but the behavior is not deterministic and sometimes there are problems that are not understandable (at least for me). Including the connection string and the IP that I use are correct.

  The problem:

  The BB is able to open the plug when it is connected with the router and I am able to interrogate my IP. But I'm not able to reach the appliance with the laptop:

  -J' try to connect with my desktop or PuTTY

  -J' I try to ping the device: destination unreachable host

  The laptop is connected to the router and able to access the internet. And the device is connected to the router, otherwise open the plug would result in an exception (tunnel failure).

  My solution:

  I use the browser on the device to connect to a Web site. I try to ping the device again. If it's not accessible I connect to another internet site until the device is 'who responded. " Can I use my desktop application to connect to the Jack and it works great!

  But the solution is not acceptable to the final application, so I need to fix this. But I can't find a solution.

  -The router is working and the Internet works fine when I use it with my laptop.

  -L' device is able to access the internet via wifi without problem.

  -L' connected to the router, otherwise he would not be able to open the socket.

  So there must be some sort of locking mechanism within the device that does not transmit the ping requests or the connection of the laptop until I connect to an internet site. Maybe some sort of mechanism of energy efficiency or safety.

  Any ideas?

  New results:

  The problem does not occur when I use another router. So, I'm quite sure, that it is based on the first router or its configuration.

  @MSohn: thanks for the support!

• How can I access the wifi from my application configuration?

  Hello

  My application requires Wifi 'on' and I want to help the user to go to the wifi configuration by clicking a button in my application.

  Perhaps, it is not possible, but is there a way to open the "wireless settings" directly from my application (by clicking on a button for example)?

  Thks

  You can run this application 'net_rim_wlan_wizard' by ApplicationManager.

• How to check the system configuration of the SX20 if the touch screen and the remote control does not work

  Hello friends, would like to know how can we access/check the system configuration of the SX20 if we not touch and remote control or they are not in working condition.

  I think that we can check this Switch interface, but unfortunately, I don't have access to the local switch right now.

  Hello

  option is to have access to the local switch and run "show cdp neighbors detail."

  or

  Connect the mobile to PC/computer LAN, run tftpd32 with affected DHCP pool. Then you can login to get the config.

  regds,

  Aman

• HP LaserJet P1102w: Cannot install the driver or the printer

  I had this problem on my old PC as well.

  I plugged my printer via the USB port (a port I don't know for sure works) and nothing pops up to auto install or whatever it is. I thoguth that was weird, but I also thought that the pilot would be on the printer, so let's just go to the section of the Control Panel printer. I did it, and the printer is there, but he says that he has no driver. I tried the option to find driver, but that did not work.

  I thought maybe I just need to download it then. Came on the HP site, downloaded the installer for my printer and started running it. He gets to the part where I need my printer and plug it into the USB port. I did, but it will not register in the installation software I did. The USB port works, as I have the ability to eject the printer in the taskbar, but I can not install anything.

  Hello @Kitanya,

  Welcome to the Forums of HP Support!
  
  I understand that you encounter USB connectivity problems during the installation of your HP LaserJet Pro P1102w printer on your computer Windows 8.1. I would like to help you to solve this problem today. Now I see you tried first to install your HP Laserjet Printer simply by plugging the USB cable in order to run the HP Smart Install process. HP Smart Install is the installation program built into your printers of programming. By plugging the USB cable, if own you a CD player on your computer, the printer is supposed to be recognized as a software CD and an installation must be started. However, is there is no problem with the CD drive on the computer or the printer is blocked to be recognized correctly it can cause the HP Smart Install feature does not work correctly. That being said, when you tried to run the installation with the downloaded driver package and were prompted to plug in the USB cable, then because the printer has already been connected "prematurely" with the USB cable already recognized computer connection. Therefore, the computer won't recognize the P1102w related 'recently' if he thinks already that is.

  With that all being said, I will guide you in the faster and easier way to solve this problem. Please follow the steps below.

  Step 1: Uninstall the drivers:

  Even if the installation has not completed successfully a part of the software and drivers can have made their way onto your computer. It is important that we have a nice clean slate to work with, so please follow the steps to remove all traces of your computer printer.

  1. Unplug your USB cable from your printer HP Laserjet, as well as your computer
  2. Open the screen Start by clicking the Windows button on the lower left corner of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
  3. In the start screen, type programs and features. Click on programs and features to run
  4. Scroll through the list of population programmes and to locate the HP Laserjet.
  5. Click the HP Laserjet Printer and select uninstall
  6. Follow the instructions on the screen to complete the uninstallation.

  Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen Start by clicking the Windows button on the lower left corner of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
  2. In the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder, once it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Reinstall the drivers:

  1. Please click here to download the appropriate drivers for your printer
  2. Once the site opens click on the download button at the top left
  3. Allow the download to run
  4. Follow the steps on the screen to reinstall your printer
  5. Do not plug in your USB cable until the installation screen invites you to.

  Once the installation is complete, please test printing.

  Please reply to this message with the result of your troubleshooting. Good luck!

• trying to UN-ininstall print driver error message: could not remove the HP LaserJet 1020 driver. The specified printer driver is currently in use. __Failed to remove the hplj1020.inf package. Access is denied.

  I have a new win 7 and have a lot of trouble installing an HP laserjet printer.

  When you try to remove the drivers under properties of the print server, I get the following message:

  "Cannot remove the HP LaserJet 1020 driver. The specified printer driver is currently in use.
  Impossible to remove the hplj1020.inf package. Access is denied. »

  someone knows what's the problem?  the prnter is not yet connected.  Must not be in use.  The problem I had was that the stuff sent to the printer seems to sit and take 15 ins to print a test page.

  How can I remove the drivers?

  Stop the print spooler service, and then start the print spooler service.  Now, delete the print driver and packaging. Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

• HP p1102w: could not connect to the WiFi hp p1102w

  Hello

  OS-windows xp

  router - huawei lte cpe e5172.

  WPA/wpa2 security.
  
  I can't connect my p1102w printer to the wireless network. He always says: "the password entered was not accepted by the printer" when I try to connect it. I guess that's the wpa key. I type correctly. I tried many things, but nothing has worked.
  Help, please.

  Reset the printer to the default network and restart the connection to your SSID unsecured.

• HP Laserjet P1102 by USB "the disk you inserted is not readable by this computer.

  My HP Laserjet P1102 used to work properly with OS X10.10. Then he started to say (now I'm on osx 10.11.4) "the disk you inserted is not readable by this computer" whenever I have the lit, but the printer still work. What should I do?

  I tried with this solution HP Laserjet P1102w by USB "the disk you inserted is not readable by this computer ' Ec Capitan osx's option"repair disk permissions ".

  I can't say if it will work, and it may even be harmful, possibly to the point of making your mac unbootable, so be careful - all the least have a clone of your system disk. If you start using the internet (Command-Option-R) recovery mode, and if your mac is a model that existed prior to El Capitan, it could be that the disk utility you get in this collection is the old version, including the order of repair permissions.

• LaserJet Pro M251nw color 200: Wifi turned off but still broadcasting

  Hello

  First, forgive my English.

  I have a HP LaserJet Pro 200 M251nw color, it has a capacity of wifi. Because the printer is connected with a cable ethernet to my router, I don't think that he had to use the wifi built into the printer.

  Thing is, when if I disable the wifi of the printer, and even if I disable "wifi direct to print", I can still see the SSID of the printer on my devices House (200 HP-Print-a6-LaserJet color).

  I looked on the forum and I tried the 'factory reset' turn, unplug the printer and taken, wait 15 seconds... etc. It did not work. I also installed the latest firmware.

  Any help would be greatly appreciated! :-)

  Hello revlib,

  Welcome to the Forums of HP Support!

  Turn off the wireless directly on Color LaserJet Pro 200 M251nw should have disabled the SSID broadcast. Since the display before disabling has not resolved, try the built-in webserver (EWS).

  To access the built-in Web server, you will need to enter the IP address for the M251nw in the address bar of your web browser. The IP address may be collected by touching the Setup program () > reports > Network Summary.

  Once in the SAP, click on network > wireless direct configuration > select and apply.

  

  Let me know if this has help

• P1102w - cannot find the printer

  Hello

  I'm unable to print using a wireless connection.

  the printer is p1102w.

  operating system is MAC OS 10.10 Yosemite

  Whenever I try to print something I get "printer is not connected / cannot find the printer" message.

  I tried the solutions on your support site, but nothing helped.

  For sure, printer is connected to the same network as the computer. I see it on the print configuration page and I can connect to its IP address via a web browser (but I can't use web services).

  All software and drivers are up to date. Update Apple is nothing new to me. Niether have your site.

  I tried to move the printer closer and further away from router. No results.

  No web proxy is related to my network.

  To make this work, I have to remove the printer from my system, reinstall it using the USB cable, and then add it again via wi - fi.

  But some time the problem reappears.

  It's really frustrating. Help, please.

  Hi @xopot ,

  I see that you have problems printing via wireless network. I would like to help you today.

  Since you can access the printer embedded Web server, the printer would have a valid IP address. Most likely, it has something to do with the software that the printer uses.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  

  

  Configure a static IP address for the printer.

  The printer is not found during Installation wireless.

  Do not take into account the title. Select the Solution 4: assign your printer a static IP address.

  If you need help, let me know.

  Have a great day!
  Thank you.

• P1102w lets only the WPA2 passphrase; no key

  P1102w printer

  network uses WPA2 encryption... I only have the 64-character hexadecimal key

  I DO NOT have the original password.

  The page configuration of printer requires the (up to 63 ascii characters) password.

  This configurable printer for access to the wireless network with the hexagonal key 64 characters instead of the password?  How can I get it? (the pass phrase field is limited to 63 characters.

  Thanks in advance

  Hi MikeBee,

  Try to connect the printer to your computer using the USBSOW method below. Let me know what you find?

  Standard connection with a USB cable

• Access to the Marina wifi problems

  I live in a marina and use the wifi from the marina.  My iMac (2008, equipped with internal wifi) is low in the boat (galley down), which is fiberglass, but has wires and other equipment in the world.  When it is docked (that's all I'm concerned about here), not a large part of the equipment works except appliances regular and battery 12v and 32v "offers/Chargers"  I borrowed a Belkin range extender (1106v1 F9K), which helps, but not enough.  It is an inner ring road and the line of sight to the antenna of marina (150 feet) and (less so) to my computer are not good.  I have examined) 1 antenna USB iMac (--> Belkin?), 2) hacking a router not used the Belkin (cable?), 3) installation of a wifi antenna ($$) on my arch of radar which would have good line-of-sight and might, without effort, wired ($) directly to the computer or to an access point (terminology?)  (?$).  Next gen electronics marine start using some wifi and if this last combo would allow this traffic, it is worth the investment.  There are other options for example. existing antenna (VHF?), beach (?) radome, beach dome (?) satellite.  Here, the "old salts" around know the antenna, but not computers.  I do not know! (But difficult).  There are many other wifi signals locked appear on my computer.  I am a small time internet user but considers Netflicks marina limit myself to only basic cable!

  You aren't going to get the bandwidth for netflix on any shared... wireless system, so it's out of the question... you will need to hold for release into the atmosphere of TV or your collection of DVD/bluray.

  Directional antennas are the key to this... WiFi is more powerful because the problem is receiving does not transmit.

  And you need to get a direct line of sight to the wifi everywhere where it is setup in the Marina... because it is not possible to get the signal through some big boats steel nice... your fiberglass is very well... unless he has mixed in freezing metal. In any case on a boat to mount the antenna as high as you can... and the router with it... so you can connect to it by ethernet would be the best... Although you can use wifi if you wish, messy but possible.

  You can buy outdoor combined AP suited perfectly to your task.

  Here is the outdoor kind of AP you want to buy.

  http://www.TP-link.com.au/products/details/cat-4581_TL-WA7210N.html

  Most brands will have this kind of thing... Ubiquiti is one of very good... but buy just 150 Mbit, which is more than enough for what will use wifi.

  https://www.ubnt.com/Unifi/Unifi-AP-outdoor/

• P1102w - new router, the new network not printing

  I had the 1102w all set up and running on my network printing from 4 different computers. This morning, I changed a combination of westell/Belkin modem/router for a new modem router from verizon. I created a new network with wpa2 security. I got all the computers in place but the printer does not print - printer dialog reported an error in printing (no error message, just with the special printer, an error has been reported). The blue light continues to blink. I thought that it was because the printer was trying to talk with the new modem but did not have the wpa key. It also meant that I could not go in the printer from one of the computers to change the wireless settings. I tried to install it on my Surface via the USB port, but then I didn't know what to do. I tried the reboot and reset everything. I even disabled the security on the network then it would not require a password. But still, the blue LED flashes quickly and then turns off. The configuration page shows all 0.0.0.0 for different addresses even theough the computer is always looking on the IP that the printer used to keep.

  Help, please! How can I get the printer to reconnect to my network?

  Hello

  To connect the printer to your new wireless router, you must use the interface for installing software as follows:

  1. Download and run the latest version of the software below. escape in the installation, and then close the configuration screen that is launched:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-80329-8&cc=us&DLC=en&LC=en&OS=4132&product=4110396&sw_lang=
  2. Navigate to C:\LJP1100_P1560_P1600_Full_Solution and run the HpSetup.exe file.
  3. Select easy install, then the Series HP Laserjet Professional P1100w.
  4. Select Configure to print over wireless network.
  5. Click next and follow the instructions on the screen.
     Note: the installation invites you to temporarily connect a USB cable to put the settings back wireless to the printer, be sure to unplug the unit once configuration is complete and the installation invites you to do so.

  Once configuration is complete, don't forget to restart the other PC and ensure that everything is running.

  Shlomi

• my wifi doesn't have access to the internet

  I have no problems before, but since I had the system ultimate internet phone I have more access to internet wifi. Any suggesstions.

  I called the company and spent several hours on the phone with them, I also have dumped story, disconnected from everything and plugged all back, no help.

  Hi MoWhite18,

  ·         What version of Windows is installed on your computer?

  ·         You receive an error message or error code?

  To fix your problem, try the following methods one by one.

   

  Method 1: Update the network driver.

  Steps to update of network driver:

  a. click the Start button.

  (b) in the search box, type devmgmt.msc , and then press enter.

  c. Select the peripheral network adapter and right click on it

  d. now, select Properties.

  e. in the Properties window, on the driver tab, click Update driver .

  f. after the installation of the updates, restart the computer.

  For more information, see the article mentioned below:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Method 2: Try resetting the TCP/IP stack.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  If the same problem still persists, then try the next method.

  Method 3: Here you must troubleshoot using the resolution of network problems in Windows 7 and check for the issue to this follow the link provided below.

   

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Let us know if that helps.

• Photosmart 7510: Access to the separate wifi network printer

  I have 2 wifi networks, for the expansion of the range in my house; We built my router (Fios) fios and others (Asus) connected to the same router via ethernet.  My printer is connected to the wifi Fios network.  When I'm at the back of the House, I connect my laptop to the Asus wifi network but am unable to connect to the printer.  Is there a way to make the printer visible on both networks?

  Hi @lsrothstein,

  Welcome to the HP Forums!

  I see you're wondering if you can access the printer HP Photosmart 7510 of several networks at once. I'm happy to answer that question for you!

  The printer is designed to work only on wireless at the same time. So to be able to print to the printer, the cell phone/mobile device must be connected to the same wireless network to which the printer is connected to. think of it as an invisible cable from the computer to the router, to the printer.

  This website, HP Wireless Printing Center - basics wireless, goes into great detail, if you are interested.

  Hope that answers your question and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."