LaserJet P1102w: Problem setting Wi - Fi for p1102w

Similar Questions

• LaserJet M1212nf: Problems setting up wireless printing

  I can set up to print from my laptop with a USB connection to the printer. I want to be able to print when away from my office, so have tried for 2 years, on and off, to get my printer to print wireless. I spent probably 10 + hours trying to get this set up. In the end, I always end up having to reinstall the printer with the same old USB connection.

  It drives me crazy. I'm a tech writer for a society of software and very savvy in computer science. However, my non-techie family have all managed to set up wireless printing at their home in 5 minutes or less with different brands of printers.

  Here are the steps that I followed, although I also tried many variations, like trying with my USB cable connected or disconnected.

  (1) uninstall the current installation of the printer (USB).

  (2) on the printer itself, make sure that the settings > network settings are the default values.

  (3) using the latest drivers and installation .exe from the HP site, start a new installation of the printer.

  (4) when you are prompted, select "wireless."

  RESULT: even if my firewall is turned OFF, search and indicates that he is there any printer on the network. (Huh? Which network?)

  (5) try again once and this time select "Network Setup."

  RESULT: even if my firewall is turned OFF, search and says that it cannot detect a network.

  If the wireless installation requires a network, but network installation does not cause a network to install, I don't know where to go from here.

  (6) I also tried downloading and installing the ePrint utility, but when I'm at halfway through the installation, it tells me that it cannot find my printer.

  I am suspicious that my model M1212nf MFP may even not allow for wireless printing. Some info on the HP site says to check a particular button lights up to indicate that the printer is online. This light does not exist on my printer model. However, the parameters of the printer from my physics has parameters such as: "show IP address," etc., which would lead me to believe that it can work wireless.

  I have read all the help related HP printer, and there is nothing which explains, in simple language, what are the types of cables, I need to set up a network and the Wi - Fi connection, when to plug them in, what facilities to perform on the many Add - ons available, etc.. I don't know that it's a 5 minute process if there was just a good explanation in the help of the UP of how do. Assistance would be appreciated!

  Hello @SKYdiz,

  Welcome to the Forums of HP Support!

  I understand that you have had problems for the last 2 years and spent many hours trying to configure your HP LaserJet Pro M1212nf MFP for wireless printing. At this point I'll provide more information about it. First of all, are sitting you?

  Unfortunately, the HP LaserJet Pro M1212nf multifunction printer isn't a model wireless printer. The "nf" at the end of the name of the printer is the abbreviation of 'network, fax. Therefore, if your printer is not able to connect to your router wireless, it CAN connect with an ethernet cable.

  All you need to do is connect an ethernet cable to the back of your printer to your router. That all devices connected to this router even (whether through wireless or wired ethernet connections) would be able to 'see' your printer on the network and print it on your printer. For more information on configuring ethernet on your printer, please visit: Setup the printer to a wired network in Windows 7 for HP's LaserJet printers.

  Now, if an ethernet connection does not work in your specific network, HP makes other Laserjet models that do not use the wireless function. Here are two LaserJet who are black only, multifunction wireless units that resemble your current printer model: HP LaserJet MFP HP LaserJet MFP M225dw Pro and M127fw Pro.

  Please let me know if this clears up any confusion. If you have other questions or concerns, I'll be more than happy to help you. Happy new year!

• Problem setting 7606 router for authentication GANYMEDE +.

  Hello community support.

  I have two routers Cisco 7606 I tried in vain to have users authenticated using servers GANYMEDE +. As noted below, I have two servers (1.1.1.1 and 2.2.2.2) accessible via vrf OAM which is accessible from desktop to ssh login. The real IPS and FFS have been changed because it's a router of the company.

  I use two servers to authenticate on a lot other devices Cisco network that they work properly.

  I can reach the vrf servers and the source in use interface. I can also port telnet 49 if the source interface servers and the vrf.

  The server key is hidden, but at the time of configuration, I can see that it is correct.

  The problem is that after confuring for authentication RADIUS, the router always uses the password to enable instead of GANYMEDE. While debug output shows "incorrect password", why not the router authenticates using GANYMEDE? Why is he using the enable password?

  Please review the outputs below and help point out what I may need to change.

  PS: I have tried many other combinations, including obsolete without success, including the method proposed in this page.

  http://www.Cisco.com/en/us/docs/iOS/sec_user_services/configuration/guide/sec_vrf_tacas_svrs.html

  Please help I'm stuck.

  ROUTER #sh running-config | s aaa

  AAA new-model

  AAA server Ganymede group + admin

  Server name admin

  Server name admin1

  IP vrf forwarding OAM

  Ganymede IP interface-source GigabitEthernet1

  AAA authentication login admin group Ganymede + local activate

  AAA - the id of the joint session

  ROUTER #sh running-config | dry Ganymede

  AAA server Ganymede group + admin

  Server name admin

  Server name admin1

  IP vrf forwarding OAM

  Ganymede IP interface-source GigabitEthernet1

  AAA authentication login admin group Ganymede + local activate

  GANYMEDE Server Admin

  1.1.1.1 ipv4 address

  button 7 XXXXXXXXXXXXXXXXXXXX

  GANYMEDE Server admin1

  2.2.2.2 ipv4 address

  button 7 XXXXXXXXXXXXXXXXxxxx

  line vty 0 4

  authentication admin login

  ROUTER #sh Ganymede

  GANYMEDE + - public server:

  Server name: admin

  Server address: 1.1.1.1

  Server port: 49

  Opening of socket: 15

  Firm grip: 15

  Write-offs of socket: 0

  Socket errors: 0

  Socket timeouts: 0

  Failed connection attempts: 0

  Total packets sent: 0

  Recv packets total: 0

  GANYMEDE + - public server:

  Server name: admin1

  Server address: 2.2.2.2

  Server port: 49

  Opening of socket: 15

  Firm grip: 15

  Write-offs of socket: 0

  Socket errors: 0

  Socket timeouts: 0

  Failed connection attempts: 0

  Total packets sent: 0

  Recv packets total: 0

  Oct 22 12:38:57.587: AAA/BIND(0000001A): link i / f

  22 Oct 12:38:57.587: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

  Oct 22 12:38:57.587: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

  Oct 22 12:38:57.587: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

  Oct 22 12:39:02.327: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

  Oct 22 12:39:02.327: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

  22 Oct 12:39:04.335: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

  Oct 22 12:39:04.335: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

  Oct 22 12:39:04.335: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

  Oct 22 12:39:08.675: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

  Oct 22 12:39:08.675: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

  22 Oct 12:39:10.679: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

  Oct 22 12:39:10.683: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

  Oct 22 12:39:10.683: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

  Oct 22 12:39:14.907: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

  Oct 22 12:39:14.907: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

  ROUTER #sh worm

  Cisco IOS software, software of c7600rsp72043_rp (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.1 (3) S3, RELEASE SOFTWARE (fc1)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2012 by Cisco Systems, Inc.

  Updated Saturday, March 30, 12 08:34 by prod_rel_team

  ROM: System Bootstrap, Version 12.2 SRE (33r), RELEASE SOFTWARE (fc1)

  BOOTLDR: Cisco IOS software, software c7600rsp72043_rp (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.1 (3) S3, RELEASE SOFTWARE (fc1)

  The availability of ROUTER is 7 weeks, 5 days, 16 hours, 48 minutes

  Availability for this control processor is 7 weeks, 5 days, 16 hours, 49 minutes

  System returned to ROM by reload (SP by charging)

  System restarted at 20:00:59 UTC Wednesday, August 28, 2013

  System image file is "sup - bootdisk:c7600rsp72043 - advipservicesk9 - mz.151 - 3.S3.bin.

  Last reload type: normal charging

  Reload last reason: power

  This product contains cryptographic features and is under the United States

  States and local laws governing the import, export, transfer and

  use. Delivery of Cisco cryptographic products does not imply

  third party approval to import, export, distribute or use encryption.

  Importers, exporters, distributors and users are responsible for

  compliance with U.S. laws and local countries. By using this product you

  agree to comply with the regulations and laws in force. If you are unable

  to satisfy the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:

  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

  If you need assistance please contact us by mail at

  [email protected] / * /.

  Processor CISCO7606 - S (M8500) Cisco (revision 1.1) with 3670016 K/K 262144 bytes of memory.

  Card processor ID FOX1623G61B

  PLINTH: RSP720

  CPU: MPC8548_E, Version: 2.1 (0 x 80390021)

  KERNEL: E500, Version: 2.2, (0 x 80210022)

  CPU:1200 MHz, CCB:400 MHz, DDR:200 MHz,

  L1: D-cache 32 KB active

  I'm hiding active 32 KB

  Last reset of tension

  3 virtual Ethernet interfaces

  76 of the gigabit Ethernet interfaces

  8 ten interfaces Ethernet Gigabit

  3964K bytes of non-volatile configuration memory.

  500472K bytes of the map of PCMCIA ATA internal (512 bytes sector size).

  Configuration register is 0 x 2102

  To resolve this problem. Please replace the below listed order

  AAA authentication login admin group Ganymede + local activate

  with;

  Enable AAA authentication login default local admin group

  You have set the group name server as a list of methods and instead use admin as a group of servers, you used Ganymede +.

  Note: Please ensure that you have local users and enable the password configured in the case of Ganymede inaccessible server.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Problem setting Application Role for DPS

  I'm trying to set up an Application role account for a DPS multi-folio application. The application content is sold (on iOS iPad only, initially) and some for free or will the free content preview value. We have access to DPS through a company customer ID and license, trying to put in place the other oles, that we need to proceed with the construction.

  When I click on 'Activate', I'm waiting to enter the name of the application, what I've done. I also checked 'Enable the Preview Article' so we can report content to preview. We do not want visible content on the web.

  Down in section Analytics though, when I click on 'Send', I get this error.

  

  How to go beyond that or properly configured Analytics?

  You typed in a report Suite name and check availability before submitting?

  Business accounts are invited to specify a report name single suite and can optionally specify the name of the company if they have an account of SiteCatalyst. If you have an account of SiteCatalyst, use the exact name used to SiteCatalyst so that the remainder of the report is linked to the appropriate company.

• Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless.

  Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless. (Instructions say I need cable to do).  How can I set up wireless without buying a new usb cable

  loudford73 wrote:

  Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless. (Instructions say I need cable to do).  How can I set up wireless without buying a new usb cable

  Hello

  If the instructions that you need a cable then you need a cable. On several printers now, you don't need USB cable for Setup (that's why many boxes do not have) and you can run the installation on your computer or a button on the printer.

  Kind regards.

• Security key for HP Professional Laserjet P1102w

  I have a HP Laserjet P1102w of professional and wanted to use it in wireless direct printing. The connection to the printer networkhas no problem and it can print nicely. But I can't find a way to define a security (e.g. the WEP key or password) key for the wireless connection. In this case, if there is no security key has been defined, then someone in the area could be easily connect to the printer and use it for printing.

  The question:

  Is it possible to set a security key for the wireless connection?

  Thank you before.

  Hello

  The WEP key or password is on your router, not your printer. Which key WEP other devices (computer (s)) use? Without the WEP key or security key password, anyone can use you your network.

  Kind regards.

• LaserJet P1102w: Router reboot printer wireless problem cures - why?

  Ive had this printer (P1102w LaserJet) for a year now. Sometimes its been very well, other times as recently happened constantly offline. Its driving me crazy.

  I just read online that can help to restart the router and the last two times, my printer went offline, restart the router has healed (power cycling of the printer, by running a utility that stops & starts the spooler - did any of these things).

  So my question is - why reboot the router to fix this? Both times I was surfing online with this same router, and I have not noticed any problem with this router. And secondly, is there a setting that I can change into my router so that it will not goof the printer wireless?

  
  HP LaserJet p1102w

  OK, I'm about ideas.  I suggest check the firmware, there is a version 20150114 which was released end of March 2015 available here.

  It can also help to go through all the steps described in the paper here.

  If none of these solves the problem I will ask one of the HP support officers rush in this thread, they may have some additional suggestions.

• HP LaserJet P1102w: I do not know my email address for HP EPrint

  Hello

  I have a HP Google Chromebook 14 and I try to my HP LaserJet P1102w EPrint.  I did not initially set up this printer and I need email EPrint to print.  How to find this e-mail address?

  Such an IP address is wrong and will not allow access to the content, the printer or the printer connected to the network.

  Try turning off the printer, make sure it is not located too far away from your router has HOWEVER also ensure there is no less than 1.5 to 2 meters between the printer and the router.

  Turn off the printer, once it is off restart your router by unplugging its power for 10-15 seconds.

  Once you plug in the back of the router allow it 1 to 2 minutes until all lights turns on and you are able to access internet from your chromebook.

  Only, then turn on the printer and leave it a few moments to connect until the blue light turns blue.

  Then print another check for the difference.

  If you see all these addess that starts with 169.254 once again, please specify your model of router, also make it clear if you have any other computer available (this is in order to understand our options if necessary to reconfigure the connection of the printer wireless as such can be done directly from Chrome OS)

  Please let me know the results,

  Shlomi

• LaserJet P1102: Driver for LaserJet P1102w

  Need help for my LaserJet P1102w operate with Windows 10.

  Best regards / Tomas

  Hello

  Kindly click on the following link to install the printer driver for the printer.

  http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-Pro-P1102-Printer-series/4110394/model/4110306#Z7_3054ICK0KGTE30AQO5O3KA30R1

  I work for HP.

  Say 'Thank you' by clicking on the star of congratulations in the post helped you.

  Please indicate the position that solved your problem as "acceptable Solution".

• Problems installing HP LaserJet P1102w

  Hi all!

  Can anyone help me please with this problem. I bought this printer HP laserjet P1102W is approximately 4 months. It was working fine until my service provider has changed the settings to my Lynksis modem + router. So I reset the settings for my modem and if it was configured (wireless). The modem worked fine, but he could not connect with my laser printer so I uninstalled it and it was reinstalled.

  Here's the problem:

  When installing using smart installation embedded in hardware (no CD), this password box continues to appear. Maybe I had entered a password for my printer before. Problem is that I have completely forgotten in this respect. This password thing is I can't install my printer properly. If I install it using configuration USB it works by USB not wireless. But I bought it for its wireless capability in the first place that's why I wanted that it functions as a wireless printer.

  Can someone help me please. How can I recover this password? Or better yet, if there is a way for an password is not needed?

  Thank you for your help.

  You can also join by my email: {deleted personal information}

  Primus

  ATLAST my problem is solved! I refer to the manual of the user for connection problems. I had to download the manual of a Wordpress blog. I wonder why he didn't come with the box as a paper or CD version. Anyway, problem solved!

  Wheeewww!

  -primus

• Problem HP Laserjet P1102w

  Hello

  After several attempts and after installing the new firmware I finally managed to install the Laserjet P1102w on my Mac OS: Lion).

  However, I still face a major problem in wireless printing: the printer stops printing after a while. I installed the printer via Hello, characterized by a unique SSID and a fixed IP, auto power off, set the I/O Timeout maximum. The printer is accessible via the Web interface and prints documents via ePrint mobile printing. Even if the LED lights in a constant blue, the printer firm impression.

  Is there a major bug in the firmware or the printer is not compatible with OS 10.7.2?

  Chris

  I found the solution... never by HP printers if you own a mac!

• LaserJet P1102w: Download driver for LaserJet P1102w for Windows 8, which will be used to the other computer

  Could you give me a link to download this driver. The PC connected to the printer is offline, then I need to download the driver using a Mac OS X 10.11 El Capitan. Thank you

  Hi @Macaronii,

  Welcome to the Forums of HP Support!

  I see that you are looking for the software and drivers for your LaserJet P1102w printer range. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like you need drivers for Windows and Mac OS.

  For Windows 8:

  • Click here to download HP LaserJet full feature and Driver for Windows 8.

  HP has no software and drivers for this printer in Mac OS X 10.11 El Capitan. Although the Apple update utility has a print driver for the LaserJet P1100 Series that should work.

  For Mac OS X 10.11:

  To install the Apple update driver. Follow these instructions:

  • HP printers - installing a printer driver Mac using Apple Software Update

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Laserjet P1102W: I chose the eco mode (less ink) for a print job. Now, default printer for this. How to cancel?

  I chose the eco mode (less ink) for a print job.  Since then that a default printer and some programs (for example, picasa) allow me to choose normal print mode I often forget to choose normal.  How can I definitively cancel eco or printer back to the original setting?  Printer works wirelessly.  Thank you.

  In Windows 7, click Start, devices and printers, right click on the Laserjet P1102w, select Printing Preferences.  Select the desired default values, apply, OK.

• Problem with the HP Laserjet p1102w printer

  Hello

  I have the problem that my printer HP LaserJet p1102w (wireless) still print on the same page, no matter what I send to print. Curretly I can't print at all because every time when I turn on the printer starts infinitely print the same page...  I tried to reinstall the drivers, but it did not help.

  How can I solve this problem? Can I do hard reset somehow?

  Thanks in advance for any help with this problem!

  You don't mention whether or not you have recently installed your printer on a network, but this is a HP document that answers your question, once the product is installed on a network of troubleshooting.  Please let me know if it helps.

  Product print permanently the same print job

  Tobindo

  A representative from HP

• How to set up the connection HP LaserJet P1102w wireless in Mac 10.9.2

  Hello, so I need help to set up my wireless printer (HP LaserJet P1102w) to my computer (Mac 10.9.2)

  OK, here is your support page with everything you need to get running.

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&LC=en&product=4110396