LaserJet P2055DN "49 err 3D910C8.

When this printer is connected to the network via Ethernet, of builtin in 30 seconds about initialization, it briefly flashes the message on the status Panel 'Printing document' immediately gives the above error and will not respond. This happened after someone installed a program to print coupons on one of my computers on the network, which has also installed a toolbar and turned away from the home page. When he tried to use it to print a coupon, the printer flashed "print document" for about 10 minutes before I tried to delete it. Nothing in the queue so I have power under the printer, i.e. when the error came on a bike. I: updated firmware, cold start the computer where the coupon was printed and uninstalled the program and the toolbar and restarted the printer again. The error appears only when the printer is connected to the network. If I leave it unplugged, the error never appears. Other posts around the Web indicate that the jury of formatting might need to be replaced (or I might need to cook in the oven for a while), but I tend to dismiss this possibility, given the circumstances in which the error is or is not displayed. Any suggestions for where the printer might try to receive this document Ghost and how to purge?

Hello, I have a quick question, are you able to directly connect the printer to a laptop? Or a machine that isn't on the number turned away coupon network? I was wondering if you could just have something lurking around hidden on the network which is always something of this show, I try to print to the machine. Also, I try and unplug the workstation that started this issue, then connect the computer to the network and see if the error returns. Usually with a code of 49 error dealing with updated firmware that you did, or a corrupted file that hits the machine. I don't know if my answer will help any but hope it helps to point to a solution.

Tags: HP HP Printers

Similar Questions

  • P2055D: LaserJet p2055d - 49 Err 3D910C8

    Hello

    Since a week, 3 laserjet p2055d printer, I got the error: 49 3D910C8 Err when we want to start a print job. 3 printers at the same time. I think that next to an automatic update of windows 8.1.

    • There is no gosts jobs in the queue
    • I tried to restart the printer
    • I tried to uninstall (with uninstall process L1, L2, L3 and L4), then reinstall the drivers
    • I tried to uninstall and allow windows to recognize the printer
    • I tried to update the firmware

    I always get the error on the printers.

    When I Plug one of these printers on a computer with Windows 10 it works perfectly.

    Can someone help me? Cannot find sometings helping me on the Internet.

    Thank you very much

    David.

    Hi David,

    Sorry, I can't send. You can search it on google with dirver file name "upd-pcl6 - x 64 - 6.0.0.18849.exe.

    Good luck!

    Good bye.

  • LaserJet P2055dn: LaserJet P2055dn on Server 2003 R2 environment

    I have a Windows Server 2003 32-bit R2 network environment in which I have several printers of several different models that are deployed through the print via Group Policy clients.  The clients are Windows 7 Professional 32 bit upward through this year.  This year I finally went to a customers of Windows 7 Professional 64-bit.  All printers deployed on all 32-bit clients with no problems, but there is only one, LaserJet P2055dn printer, I have 2 that will not deploy new 64-bit clients.  All other printers model deployment and install correctly.  If I try to install the P2055dn printer on the 64-bit client as a network printer everything seems to start to install, but it fails with the message 'X connection to printer Windows cannont connect to the printer.' with "the operation failed with error 0x0000007e" under display invisible characters.  Anyone have any suggestions on how to fix this?  Thank you!!

    This problem has been resolved.  I was adding 64-bit via the button drivers additional drivers add tab of the properties of the printer share.  When I removed the driver I installed in printing management and installed there, the problem has been resolved.  The printer is now deployed as my other printers.

  • LaserJet P2055DN: Hp Laserjet P2055dn (CE459A) - stains on a vertical edge of paper

    My Laserjet P2055dn works without problems so far. It's my

    3rd toner.  I don't know if it has nothing to do with the problem, but

    for some reason, I shook the new toner before inserting it into the printer.

    Since the first impression, I was doing the tasks as shown on attached

    photos. What I would try to solve the problem?

    The print below was made to face double-turn.

    On older models, we used to call the grapes of wrath.  It is a grounding problem and most of the time it is caused by a bad toner cartridge.  If an original hp toner, return instead of purchase for refund or Exchange.  If spare parts, you are at the mercy of the seller.  If you replace the toner and still have the issue, so you must check earthing contacts in the cavity of toner.  95% of the time it is the toner cartridge that is defective.

  • LaserJet P2055DN print quality problems

    Hi all

    New to the forum but plan on using it quite frequently as I am responsible for a large group of HP printers.  The problem I have is with a printer HP Laserjet p2055dn pritner.  I feel some ghosting along the right and left a few impressions I did some research and I * think * the fuser unit is at fault, but I wanted to ask before ordering this part.

    I ran several pages of cleaning with this printer because the problem started, and although it seems to help a little, the problem never goes away completely.  It started a few months ago and the prinouts were originally just Sales, but now they're starting to ghost.

    Hello

    The problem of ghosting is caused by the fusion station most of the time. The roll of the main user has a coating Teflon preventing toner to stick, when the door of coating you starts to become the ghost of impression that you are experiencing. You can get furnaces replacement online from many sources, just do a Google search for Fuser P2055DN.
    OR you can search the HP shopping for the same site and order it.
    http://www.shopping.HP.com/en_US/Home-Office/-/static/page-customer-services

    I hope this helps!

  • LaserJet P2055dn

    The mechanics of the plateau of the envelope has a problem.  He won't shoot an envelope into the printer to print an address.  He goes through the motions but will not seize the envelope.  If I put one or 8 envelopes into the tray, it makes no difference.  I understand there is a 'wheel' that needs to be replaced.  Are there any other suggestions before throwing in the towel and take to a repair shop?

    Thank you

    Hi @HenryVIII

    I suspect that your question it will be better answered in the HP Enterprise business community, like the HP LaserJet P2055dn printer is a business model.

    My technical expertise is with consumer products and software, I'm sure the sales people would be happy to help you if you re - ask your question for them to answer. The HP Enterprise business community is a Forum HP designed for commercial customers and business help each other. I'm sure you'll find some people here HP help also.

    Click here to see the printing and digital imaging.  When the page opens, you will see the option to "Log in" or "register now" on the right. Commercial forums are distinct from the advice of consumption, so you will need to register if you do not already have a trading account.

    You can find useful support to HP LaserJet P2055dn printer page while you wait for someone in the Trade Forum to meet your demand.

    Good luck.

  • BT 3 business center and trying to network my hp laserjet p2055dn to this problem.

    I have a new BT Hub 3 business and I'm trying my HP Laserjet P2055dn printer to the hub with an Ethernet network cable. The address of the printer - 192.168.2.2 IPv4 is not compatible. I said that I have to change the IP address of the printer, but I can't go in the settings of the printer because I can not load the printer on the system. I can load it directly on a computer using a UBS, but then again could not find where to go to change the IP address.

    Operating system is Windows XP

    Any help you can give me?
    Concerning
    Gavin

    Hi Gavin

    Please follow the steps below to disable the manual IP configuration and let me know if this is useful:

    1. press OK.
    2. press the arrow down to Appers network config .
    3. press OK

    4 locate the TCP/IP CFG option, and then click OK.

    5. be sure to set both BOOTP and DHCP as YES.

    6 confirm the changes, turn the printer off and turn it back on.

    7. press OK. and nevigate in the reports menu, select this option to print a report of the network and to check if the changes that summer applied.

    Kind regards

    Shlomi

  • Windows 7 LaserJet P2055dn - No. auto both sides print

    I am running 64-bit Windows 7 Ultimate and my LaserJet P2055dn printer attached USB works fine EXCEPT it may not be able to manually print on both sides. If I understand the situation correctly, the printer driver that is installed by the operating system is for Color LaserJet P2050 Series PCL6. The HP site, it seems that if, unlike Vista, there is no specific driver for Windows 7 for the LaserJet P2055dn. I can live with this situation, but I would appreciate your comments or suggestions on how I can activate auto two side printing on this printer.

    HP has a document that describes what you need to do to activate automatic duplexing on the CP2025. The address of the page is:

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=115&prodSeriesId=3673580&prodTypeId=18972&ObjectID=c01917596

    In case the address is incorrect... Here are the instructions:

    To enable automatic duplexing on printer drivers, follow the steps below:
  • LaserJet P2055dn printer: Laserjet P2055dn Error Message: 49 Err 46C081a


    49 errors are errors of firmware.  Firmware is the operating system of the printer and if it becomes confused it gives an error of 49. A number of things you can do to try to limit the error.  First of all, you want to go to the site web of hp and support to go to the drivers and download the latest firmware for your printer.  If your operating system does not list the firmware, just go to the 32-bit XP as the firmware appears here.  The same file works for all systems.  The printer must be in a ready state when you perform the upgrade.  You will want to remove all print jobs that may be in the printq which have not printed to avoid problems.  After upgrading the firmware, you want to go the same site and download the latest driver for your printer.  You can use the universal driver or the postscript driver.

  • HP Laserjet P2055dn on MacOS 10.6 the duplex option is missing

    The loss of appletalk on MacOS 10.6 forced me to get rid of my loyal and very old LaserJet and replace it with a p2055dn. The most attractive feature is a duplex. I installed, updated the drivers and print very well. The problem is that the duplex option is nowhere to be seen in the dialogues of printing for Word2008 or Acrobat, if it's for Safari. How to activate this option appears for all applications. MS Word and Acrobat are the most important applications to have access to duplex printing.

    OK duplex options now appear in the print dialog for Word and Acrobat

    I think the key is after installing the updated driver, restart.

    Then, the option will appear in the layout page of the print dialog box option (make sure that you have fully deployed options)

  • LaserJet P2055DN - do not print over the network

    Configure the printer last night as a network printer (which replaces a former 2300dn LJ). It would not print a test page. To verify that the printer was good, I have loaded the drivers on my laptop and connected via usb.  Was able to print a page of test via USB.  Disconnected usb and reconnected power cable. Released and reset the ip address.  Verified the ip address in scathing of the host.   When I ping the printer I usually lose half of the packages.  There are two other HP printers on the network, a P2015dn and a color 2605dn LJ. Ping their IP back to 100% with a ttl = 255. Ping the p2055 produced 4 packets sent, 2 packets received, 2 lost packets, ttl = 64 2 returns.  I changed the printer cables and exchanged the network switch ports (verified the network switch ports by printing to the LJ 2605) with the same result. I can't get the internal web server to mount, or it partially displays or combinations of these.  If this was the old style removable print server as in my lj2300, I could swap out, but it's not like I can do with this model.  When I send a test page to the printer, it displays "printing", the green light on top flashes, the activity on the network card light flashes, but nothing happens. Finally, I get a «this document failed to print "notification on the host, but the printer still says 'printing' and the lights are still flashing.»  Anyone have any ideas?  I think I'm looking at a bad network/print the server maps in the P2055.

    I also had problems printing over the network to the hp p2055dn. There was no problem via USB printing. All the network settings were ok. Can ping, etc...

    Number of days of bickering, finally found that the Config.Security Network should be reset on the physical control of the printer Panel.

    Press Ok on the Control Panel printer--> press down arrow, you get to Setup Menu Network Config--> press Ok--> a number of arrows down you get to Config network. Security--> press Ok--> you have two options - keep or reset--> choose Reset... Network printing should work fine.

  • LaserJet P2055dn Setup error

    When installing, I get the error message stating:

    "This software cannot be installed using the command" run as... " ». The installation cannot continue until this is resolved. »

    I am the only administrator of the computer and the only other account. I would like to set up the printer via a network connection. Thank you very much for the help.

    WIV,

    I don't know what process the OS you use so I tried installing on a 64-bit win7. When I downloaded the software of complete solution by default it when right on a Setup screen where I can choose the easy installation or advance of Setup options. I chose the installation easy and let it run and install as usual. If you encounter another, could you explain further, and I will try to help you through it.

    I have you linked to some documents that could be useful and a few screenshots that should help you through this. I also gave you the link to the page of the product that has the driver of the complete solution. You will want to choose the HP LaserJet P2050 post-Euro PCL6 Default Install.

    2055 d Page product - choose this option: HP LaserJet P2050 post-Euro PCL6 Default Install

    Install a driver full features or complete solution on a Windows 7 OS (32-bit and 64-bit) using a USB

    Install a driver full features or the complete solution on a Windows 7 OS (32-bit and 64-bit) through a network

    If you still need help, please post here and let me know what your specific problem.

    Thank you.

  • Where is the total number of pages printed on Laserjet P2055DN?

    Hello

    We recently bought a P2055dn LJ, which works very well. We are now on the second ink cartridge.

    I would like to know how many pages was printed completely. If I go to the page /hp/device/supply_status.htm I can see how many pages have been printed using the LAST cartridge. How can I see the total number of pages printed?

    Thanks for the good help on that.

    Calle2012

    At the front of the printer, you will need access the MENU via the LCD screen. Scroll to REPORTS and click ok, then scroll down to the configuration page and click ok. At this point, it should display a page of test/config auto with detailed info printer including the number of pages since its installation.
  • LaserJet P2055dn cold reset

    I need to reconfigure a printer LaserJet 2055dn network.  However, I can't know how to do a cold reboot.  The sequences ' press on and press and hold the power on ' do not seem to apply to the 2055dn and there is not a reset option in the menus.  Any ideas that I can do to go back to its factory settings?

    Thank you.

    Sorry, but you have the wrong forum.  These are consumer forums and you need business forums.  Just follow the link and will get you to the right place.

    http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.UBwynk2PVM4

  • LaserJet P2055dn: HP LaserJet P2055dn - duplex printing problem

    Hello

    Predict two weeks ago about problems with on our printer HP LJ P2055dn duplex printing began. We are sure that we have checked the duplex printing option but the printer does not not in this field and just print document normally, without print front and back to 100%. This is the case for about 50% of the printed documents.

    Printer is connected via a LAN cable.

    The drivers used: universal printing HP PCL 6 (v5.9.0 :)

    Y at - it all isue similar known with this model? Could you please help me? :-)

    Best try is reinstalling drivers, right?

    THX

    Ladis

    I do only material, so I have no answer if the word has a problem.  Another option is to load another copy of the pilot, but call it a 2055duplex and set the properties of the default duplex.  This way when one of your users want duplex just what they need to do is change the printer to the 2055duplex and it should work.  Leave the default value as the simplex driver.

Maybe you are looking for

  • Change date yyyy-mm-dd format

    I have a few dates currently shaped like "2016 on 20 may, Friday. I would like to change the date format '2016-05-20. How can I do this for 200 cells at once? I tried to select cells and going Inspector-> cell-> data-> Date and time Format, but after

  • 8.1 to Windows and HP update

    When did HP will fix the problem with windows 8.1 and 15 t-4000? I was running 8.1 win very well. Now, Windows update crashes saying: an essential element is not available. Windows 8.1 works fine on my Pavilion dv6-1350us aging. What gives? is the 32

  • How read information calculate the number of bytes in a megabyte?

    I was under the impression that 1 MB = 1024 KB = 1048676 bytes, but when I use Get Info to check the video file size I see numbers like "473,9 MB on disk (473,910,856 bytes).  Get Info uses a different method, where 1 MB = 1000000 bytes?

  • The Panel buttons before manipulation within a structure of event

    Is there an easy way to manage buttons on the front panel within a structure of the event? I am currently using a structure of the event to bring up a settings tab, but I can only use the buttons that are designated as events. Is it possible to use n

  • Big fish on my windows vista computer games

    I have a program called big fish games. After I played each game I uninstall the game from my computer. When I check my files roaming these games appear after you uninstall them. My question is is it safe to delete these files of roaming from big fis