LaserJet P3010: Cannot install the printer. The print processor does not exist

I have a LaserJet P3010 Series PCL 6. It gives me the following error when I try and add it to our print server: "unable to install the printer. The print processor does not exist. "Regardless of what kind of IP config I use, the test page I always manually print has 0.0.0.0 for everything, even with the manual entry of IP. It is brand new, fresh out of the box, and I installed a few of them before. There seems to be 2 sets of link one of them lights flashes green (even without a CAT cable) and the other shows not all colors. (I think that's the main, judging by its location). I know that the cable is good, but also over all cable infrastructure. Should I have a defective printer? Or did I miss something...

Problem solved. Use another port.

Tags: HP Printers

Similar Questions

  • Cannot install the printer. The print processor does not exist.

    Windows 7 Enterprise 64 bit.  I am able to install HP LaserJet printers but no virtual printer.  I can not load the XPS from Windows printer or Print to OneNote.  I also tried to load more than one PDF printer and none of them work.  The error I keep gettig to "cannot install the printer.  The print processor does not exist. »

    Any ideas would be appreciated.

    My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.

    Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction.   We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.

    [Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]

    You wanted to post this in case someone else ran into a similar problem.

    This is what worked for me.

    I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).

    Step 1: Stop the print spooler service.

    Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.

    Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.

    Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.

    Step 5: Start the print spooler service.

    Try to connect or install your net printer and it should work now.

    I hope this work for all of you.

  • "Windows cannot connect to the printer. The print processor does not exist.

    I am trying to connect to a printer on my home network.  LaserJet 1020. Who lives on a different computer on windows 7.  It works fine on his 'home' of that Win 7 cannot connect to the printer. but when I try to network I get this message.  "Unable to connect to the printer. The print processor does not exist.  I downloaded a new driver from HP without success.  All of the suggestions.  Thanks in advance.

    Print processor which is using?  Properties of the printer, Advanced Print processor.   See if changing to wil Winprint allow the connection of the printer. Note the current so you can change back if required. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

  • "The print processor does not exist" what can I do? The printer is a Brother MFC-J430w.

    I am trying to install a wireless printer Brother MFC-J430w on my Dell PC to 32-bit. I have downloaded the driver on the Internet, but I get a prompt saying "cannot install the printer. The print processor does not exist. "What should I do?

    Yes, you can try to replace localspl.dll winprint.dll

    Create a restore point from the system beforehand and restart the computer later.

  • "The print processor does not exist.

    I'm trying to install an XPS printer on windows 7-64, but get the message "Print Processor does not exist". Can someone help me please

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • Installation of the printer driver Officejet G85 fails with the message "print processor does not exist" with Windows 7

    The site compatibility Windows 7 says that this OS is compatible with my Officejet G85 all-in-one old.  Whenever I try to add this printer is using the automatic functions or manual installation of the driver fails and I get the error message that "print processor does not exist.  I tried to install the original with the most recent compatibility software is Windows 2000, but Windows 7 does not allow indicating that the program already exists and I have to uninstall it first.  However, I can't find it listed anywhere for uninstall it, and the original software disk does not have this feature either.  HP does not support printer and would not help provide.  This printer worked perfectly with Windows XP and we really like it is equipped.  Please help us raise this printer up and running with Windows 7 64 bit home edition.  I tried things I found that it was similar in the forum with no success so far.

    Hello

    You can run the printer troubleshooter. Convenience store solves some common printing problems.

    If your computer has problems printing, try using the printer Troubleshooter to solve the problem. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

    Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

    Reference:

    Open the printer Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    See the following articles from Microsoft for more information on installing a printer or driver printer:

    Install a printer
    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    Find and install printer drivers
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    If the problem persists, you can contact the manufacturer of the printer for more information.

    http://WWW8.HP.com/ca/en/support-drivers.html

    Hope this information helps.

  • 2 printers - can print only a - print processor does not exist?

    I have two printers - one that I just bought.  I installed the new without any problems, that is a series of Deskjet 3510.  The other is a series of deskjet 6980.  I want to use two printers, but when I try to print the 6980 is not in the drop-down list.  I see when I look at the printers in my computer, but he can't see it when I try to print.  I tried to reinstall the 6980 and it says that the print processor does not exist.  Help, please!

    There's a troubleshooter created by HP

    Please try the HP printer installation wizard

    or use this link: www.hp.com/go/tools

  • Print processor does not exist

    I am running Vista Home Basic SP2, and all of a sudden my computer does not recognize my computer. Attempts to re - install gives the notification: "unable to install the printer. The print processor does not exist. "What could be the problem? How is this best set?

    I finished by using System Restore and restore to the previous successful configuration. It worked, but I still don't know why the printer stopped working. Everything works fine now. Initially I had uninstalled the printer and re-installed, but he would never let me complete the installation.

  • charge battery after installing the new battery does not exist

    I use Windows 7 Ultimate Spk1 32 bit on my laptop (big mistake)
    I recently installed a new battery & put it through the cycles of preparation 3 times following the instructions.
    The next time he went down to the alarm of low level newly together and I added the power adapter, nothing happened, the battery wouldn't charge.
    After many attempts to do nothing improved load, especially my temper.
    They advised me to install another battery which I just did, and this SECOND new battery just sits there & will not charge either.
    When he arrived he had 10% fresh rate showing so I removed the AC adapter and let him draw 8%, but when I replaced the adapter he had served on 8% & does not load.
    What is going on? How a simple thing like recharging simply disappears. ?
    Does anyone have a solution for this problem?

    See you soon
    Geoff

    The charging circuit inside the laptop and recharges the battery while the laptop is plugged into the mains. If the load circuit does not have the laptop is running on a charged battery or the power cable, but won't charge the battery.  The fact that the machine failed to load two new and old battery suggests the charging circuit has failed.

  • Dell XPS: HP Envy 5530 print processor does not exist

    The printer is installed and works fine wirelessly.  Fix an update or antivirus protection and he was no longer a compatible printer PictBridge including PDF printer. I don't know when it happened.

    I tried different things as suggested by microsoft support. Copy the folder Prntprocs/X 64 on C:/windows/system32/spool/who was missing winprnt.dll from a work computer.

    CHecked Reg Key and winprint.dll driver added to Windows NT. There were x 64.

    Checked print spooler was carried out.

    Local printer by USB could be installed correctly.

    Puzzled!

    Hello

    If you have tried the steps as described in the post and if the problem persists, try the steps as shown in the above the below URL.

    http://support.Microsoft.com/kb/929833

  • Cannot install Blue Squirrel ClickBook "print processor does not appear to be installed corectly. The printer name is invalid. "Printer - 20 and 1798 error error code"

    OT: Print processor.
    During the installation of Blue ClickBook squirrel (for windows7) I get the message "the print processor does not appear to be installed corectly.  The print processor is unknown.  The printer name is invalid.  Also "printer error code - 20 and the 1798 error.»  I need CBWP. DLL to work properly in order to be able to use this program.

    Hi Chancey,

    1. are you able to install other applications?
    2. are you able to print from other applications?

    If the problem is with the book in a Blue Squirrel click, then I suggest you to contact the manufacturer for support.

  • Error failed with error 0 x 80070424: the specified service does not exist as an installed service.

    I have DSL and a wireless printer that work well when the system starts; EXCEPT the desktop icons disappeared so I can't manage them! If I stop DSL through the system icons, I get the following error messages when I try to restart or to solve problems: do you know what are the services that I need to install/reboot?

    Diagnosis of network adapter

    Network location detection

    Info Using the Internet connection at home

    Identification of network adapter

    error Failed with error 0 x 80070424: the specified service does not exist as an installed service.

    HTTP, HTTPS, FTP Diagnostic

    HTTP, HTTPS, FTP connectivity

    warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
    warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
    warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
    warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved
    warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
    warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved
    error Could not make an HTTP connection.
    error Could not make an HTTPS connection.
    error Could not make an FTP connection.

    Diagnosis of last run time: 16/05/12 16:09:47

    Diagnosis of network adapter

    Network location detection

    Info Using the Internet connection at home

    Identification of network adapter

    error Failed with error 0 x 80070424: the specified service does not exist as an installed service.

    HTTP, HTTPS, FTP Diagnostic

    HTTP, HTTPS, FTP connectivity

    warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
    warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
    warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
    warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved
    warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved
    warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
    error Could not make an HTTP connection.
    error Could not make an HTTPS connection.
    error Could not make an FTP connection.

    Thanks for your attempt to solve my problem.

    Curiously he solved my problem of network while solving what has proved to be a problem with the firewall of Windows (see below): who knew?

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Security/Windows-XP-Security-Service-Center-error-1060-and/1476c2b6-8161-4ccd-a69f-93292b5152da

  • The specified service does not exist as an installed service

    Recently I seem to have problem with every thing in my laptop under windows vistas. When I try to open any program such as device 1 Manager) 2) install/uninstall any program 3) manage computer 4) remove a printer, etc., it gives only the error "the specified service does not exist as an installed service. I am unable to set something good with my computer. the system tray has the error "The Audio Service is not running". The windows update is on and its updates up to today date from the. I can't even install the 'Active X' in IE8.
    Even when I open MS office like word or execl program opens a file, but it takes 5 minutes to get active average as it opens, it gets busy. We can open other programs, but not MS office program.

    Good advice to set this right. Thank you and best regards.

    Hi Dilippatel,

    A. when it last work very well?
    B. recent changes made on your computer?
    C. who is the manufacturer of your computer?

    Try the following steps.

    Step 1 : clean boot

    A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.  To perform the clean boot procedure, follow the instructions in the link below.

    1: perform a clean boot
    2: enable half the services
    3: determine whether the problem returns
    4: enable half of the startup items
    5: determine whether the problem returns
    6: solve the problem
    7: reset the computer to start as usual

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135

    After reviewing the issue, put the computer into Normal mode. Uninstall or update the program that is causing the problem.

    Step 2:

    1. click on start.

    2. type regedit in the search box start and press to enter.

    3. navigate to the location:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BBBFC1-08002BE10318}

    4 remove the LowerFilters value in the right panel. (NOTE: under the key, it)
    are also some sub keys for example 0000, 0001. Please, double click it and remove the
    LowerFilters value.)

    5 restart the computer and check if the problem persists.

    Important this article contains information about how to edit the registry. Make sure that you back up the registry before you edit it. Make sure you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

    Try these steps and let us know the result.

    Please post you rquestion in the discussion group of the Office for issues related to Microsoft Office.
    http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Impossible to share file error: the specified service does not exist as an installed service

    Original title: Impossible to share a folder in Vista

    I have Vista Home Basic 2007 with service pack 1. My software provider tries to share a file on the network and is unable to do so and has no solution. The error message is something like "not several points endpoint available.»

    Also in the network and sharing Center I am unable to turn on network discovery, turn on file sharing, enable printer sharing. The error message is: "the specified service does not exist as an installed service."

    What is the solution? Advisor. Thank you

    Hello MC2882,

    Please see the following article for more information on the replacement of Microsoft software, or contact the manufacturer of your computer:
  • C7280 Installation error: the specified service does not exist as an installed service

    All,

    I have an AIO C7280 printer that is connected wireless to my router.  I have a pc (Vista) cable and a laptop wireless (XP) connected to the router as well.  I have no impression of question from the pc.  However, when I try to install the driver on the laptop I get an error just after that he asked me if it's a USB drive or a network printer.  I chose the network and the error appears saying "the specified service does not exist as an installed service.  I ping the printer from the laptop so I know it can 'see '.  I don't know what to do.  I have uninstalled/reinstalled several times without success.  Can anyone help?

    Thank you.

    Edit for more information:

    After building a log of installation failure and 'details', that's what I see:

    Error Situation code: 20364041

    Now Launching = X:\hpzdui01.exe - gateoncmdline easyinstall | XXX f X:\hpoins21.dat-valider No.

    LaunchNetworkInstall retrieves the value unexpected 1060

    RUN: 50 return stops Driver UI plugin

    Exit code = 50

    Message edited by gatorman on 09/18/2009 16:57
    Message edited by gatorman on 09/18/2009 17:10

    The service that the error message refers is the HP network devices support service. Try this...

    Open the contents of the installation CD, and then open the file "setup." Now you will find either a folder named 'netdevicemanager' or simply 'network '. Open if it is present. Now there should be a file with the same name as the file, but with extension .msi. Right-click on this file and click on uninstall. If you get a message stating that the action applies only to products that have been installed, and then click OK. Restart the computer IF necessary. Now, right-click on the file and click on install. Installation do not normally present a window of 'success' You will just see a bar of progress for a few seconds and disappear. Once this happens, restart the PC and check if the HP Network Device Support or similar service appeared in the list of services. If Yes, then reinstall the software, and it should install correctly.

Maybe you are looking for

  • installation problem

    Hello! Tried to install Skype for days now, nothing helps. Completed the download on the homepage of Skype, but then I get this message "error connecting to Server" or something like that. I had Skype before, but recently had my reformatting of the p

  • No printer not connected message bypass

    I have a hp deskjet 970cse - the Flash drive to the printer is broken so I got a cable that plugs into the printer cable from old school on USB in the computer - but I get a message "no printer connected" when the wizard recognizes the cable - how ca

  • Vista "Local access only" and "Unidentified network" problem

    Hi recently my Windows Vista Home Premium - 32-bit has had problems with the internet. It was only said 'Local' next to the 'access' and said "Unidentified network" and used to connect me on the internet. This problem occurs when you try to connect t

  • LaserJet P2035n goes into infinite loop when you print from Windows 7 64 bit

    I installed the latest drivers from this site for Win7 64 bt and whenever I try to print on my laserJet P2035n on the network, it goes into a loop and sends the same print job again and again until I cacel work on my PC. Anyone know why this is happe

  • What websites is displayed in the attempt to access the site Web blocked with parental filter WE

    Hello In the activity report that is generated when the family filter is on, I see attempts to access a particular Web site as 450 a week, even if it has been blocked. The number of attempts 450 times means the person has tried to access the site 450