LaserJet P3015: Error of 41.20 Hp p3015

Similar Questions

• HP Laserjet P3015 Jetdirect RESET Printserver

  Can someone please tell me how to cold reset a HP Laserjet P3015 print server?

  I want to reset all settings to factory settings ip (IP address: 0.0.0.0...)

  Thank you

  Axel

  Just reset the cold. Turn the printer off and then back on. When the memory starts to count hold down the ok button and continue to hold until all 3 lights solid. Liberation and scroll down the menu to cold reset and press the ok button. You will need to have the unplugged network cable if you want all 0. When you perform a cold reboot it affects the bootp or dhcp network that will try to find an address of your server or router.

• LaserJet P3015: Slow printing to HP LaserJet P3015

  Hello

  I have a LaserJet P3015, which has the "question of slow printing. When I sent a job to the printer it takes 2 to 10 minutes to print. I have changed the drivers, added the printer directly on computers instead of the server. Nothing helps.

  Can you please give me some ideas how to solve this problem?

  Hello

  Thank you for your response. The problem is now resolved. It was caused by the printer PCL6 driver. Switching to PCL5 solved the problem.

• change ip address laserjet p3015

  Hello, I have a laserjet p3015 printer and want to change the ip address. I think it can be solved on the printer, but I don't now how. can someone help me?

  Erik

  Hello

  Since this printer doesnot display IP address must be moved to another computer, to do this, could you please provide more information as it is the printer has already assigned the ip address?, which is the O\S used on the computer?

  Also, you can check the following link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=3815797&prodTypeId=18972&ObjectID=c01779018

• LaserJet p3015: label the value type paper on tray 2 or 3

  Is there a way to define the type of paper label on tray 2 or 3 on the LaserJet p3015?    I alternated installation HP LaserJet like that, but it doesn't seem to have this option.  Since we have an automated process printing labels I can not use the manual feed tray.

  Hello

  I'm afraid that this cannot be done,

  For the 2 and (3) bins, Label is not a supported media type.

  You can see page 78 of the user below as a reference guide, the labels are supported only on tray 1:

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c01612470-1.PDF

  Shlomi

• HP color laserjet 2605 Error error restart when you print the document

  HP color laserjet 2605 error restart when you print the document, please give me a solution?

  Apparently, there are no other problems to format, I was forced to replace it with a new one, finally hp color laserjet 2605 printer I had to walk normally.

  I hope that the discussion can be useful for each of them, thank you

• HP LaserJet P4515 - error 13.05.00 out of Fuser, paper thin, Jam.

  HP LaserJet P4515 - error 13.05.00 out of Fuser, paper thin, Jam.

  I have frequent errors of this type during work duplex paper jam. Simplex jobs seem to work unless I'm trying to duplex manually by printing on one side then the other well.

  When the jams, I will have a page hit the sensors after the roll before the transfer, usually empty the page following any given bin and my page duplex, which crossed once and came back to the backpage, folded under or on top of itself after its passage of the transfer roller, but before it hits the Fuser rollers.

  Sometimes it wil happen all other double-sided pages, or it can leave 5-10 before doing it again.

  Fuser has been replaced twice, because I thought maybe the first fusion unit was defective.

  I ran the component tests, tests of sensor and they seem normal.

  I need to know where I should look next.

  Currently, I plan to change all of the food guide, since this is where the interference takes place.

  The food guide was the culprit.

  The main roller connected to the gear was broken, which allowed to get out of the lowest speed.

• the laserjet P3015 printer printing error

  many times, a command is sent to hp p3015 printer, it prints several pages that are blank with small symbols on top and in the upper corners, consisting of arrows and hearts etc. we always to cancel printing, unplug the cable from the d-link and turn off the power then reconnect and then it starts to print ordered initially.

  Help, please

  Hi cimane10,

  It is a product of the profit margin. For the best answer to your questions, you need to transfer your question at the following links.

  http://h30499.www3.HP.com/T5/business-support-forums/CT-p/business-support

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

• LASERJET P3015: ERROR CODE 49.4C02

  Code keeps on coming, 49.4C02, with a statement "to continue, stop, and then click.  I did cela half a dozen times and get the same answer, around in a circle.  Even disconnected, without change.  New toner cart, became a weak message, no change.    Help.

  It is probably caused by a print job, so the first thing you need to do is to remove all the work in your queue.
  
  One way to determine if she has a job is to turn the printer off disconnect any cable you have it connected to the outside world by the power on and see if you still get the message.
  
  If the printer goes in a State ready to disconnect the cable, then print any internal test page, if it works it is probably a work.
  
  If my post is solved your problem and click the accepted as button solution under him.
  
  In order to thank a Tech for a post click the thumbs up button under the post.
  
  You can even click on the two keys...

• LaserJet P3015 - Duplex + letterhead

  Hello

  I have a strange pair of P3015 wishing to print documents of letterhead backwards.  The printer actually pulls the paper normally, steps back and prints on the back side as duplex printing.  Print on the plain/letter carriers works very well.

  Duplex on the built-in Web server is disabled.  The two-sided accessory is uninstalled on the settings tab of the device on our Win2007 print server.  Document settings and the application on our computers of users use either no duplex unit.

  Any ideas on what could cause this behavior?

  Thanks for the quick response.

  I checked this thread and tried to update the firmware first.  After that the update of the firmware was unsuccessful I tried to contact HP to get my hands on the .prn file that has been mentioned.

  After you apply the All_ALM_Types_OFF.prn on my P3015 the problem disappeared.  Fixed a nice and easy once you have the file.

• Printer LaserJet P3015

  Hello

  I get the error code, but get "transformation" and the control panel buttons are unusable. Fuser also runs hot, even after the replacement. I also saw a "system error: press ok to erase ' message. any thoughts?

  Weird bugs that I start with an update of the firmware, he could fix it or it could be the printer detects an error to give me something to work with.

  If it is a network printer then update firmware also solve many security problems.

  Firmware update is also free, they are found on the page support and drivers for your printer on hp.com.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• LaserJet p3015: print with the printer driver universal pcl 5 of Collator

  We use the universal PCL 5 driver for printing on a Windows 2008 R2 file and server to our printers laserjet printing network.  Our enterprise application doesn't have a way to bring together several pages together, so this will be done by the printer driver and settings.  However, I don't see an option to collect pages in the printer settings.  Is this possible with the PCL 5 UPD or it will need to be upgraded to achieve?

  As I mentioned in my previous answer, most small LaserJet printers will not print collate.

  They will just print a copy, or (as your symptoms seem to suggest) just ignore the Collate setting.

  This is because the true ranking of multiple copy requires the use of Mopier Mode, which in turn requires the availability of a hard disk of the printer - printers in most small do not have a mounted hard drive.

  To get the same effect as the standings, drivers for these printers will send multiple copies of the print job in the same connection.

  But they do if the driver configuration indicates that Mopier Mode is activated, so you must ensure that the configuration shows that it is disabled.

  

• HP Laserjet P3015: HP Laserjet P3015 - paper jams

  I just bought this printer in August 2015 and it keeps blocking every two pages. The most I managed to do print at the time was 15 pages when I used the Tray 1, but then he started jamming as well. The problem started 3 weeks ago. Finally, I disconnected and passed to another printer. Any help appreciated. I did the obvious things, such as disable, restart, tried on another computer, checked for jammed paper or small pieces. Nothing has worked. It is brand new.

  It is an error generated for the merger and the paper output area unit. I would contact the company you purchased the printer to go and let them know what going to, if you have not yet. It is possible, that you have a bad/old oven or a sensor damaged or blocked.  I'll try to help you solve the problem, but I also don't want to frustrate you. Fuser for this model is not something you can easily get out if you have not before and I'm sure that's not a replaceable element of customer.

  You can print with the back door of this open printer and the book will come out of the rear of the machine. Pull the rear door open a click (approx. 45 °) and try. If the paper is ok without interference, then the problem is probably with the exit sensor located adjacent to where the paper comes from the upper part of the machine. You will see a strip of thin black plastic in the Center and two large black tabs on each side of it. The should move freely without sticking.

  If the paper still crashes, then the problem is probably with the fuser unit. Whatever it is, the company that bought it from should be willing to help you if there is a defective part or bad connection somewhere.

  You can print on just 20 # bond 8.5x11 or something heavier like cardboard or labels?

• HP LASERJET P3015: CHANGE MY DEFAULT TRAY and the PAPER WEIGHT

  MY DEFAULT PRINTER IS TRAY 1 AND I NEED TO CHANGE IT TO TRAY 2 AND THE WEIGHT OF THE PAPER IS AT LOURDES AND I NEED TO BE AT STANDARD, HOW TO MAKE THESE CHANGES?

  To change the settings on the printer:

  Menu

  > paper handling

  > Tray 2 (or plate preferably)

  > Type of tray 2

  > choose plain

  Save

  I hope this helps!

• LaserJet 1536dnf error 79

  I'm in trouble with my 8-Butterfly-old LaserJet 1536dnf. Worked fine with my computer Windows XP and Mac OS X up to yesterday, when I tried to send a fax by flat bed scanner (scanner ADF works perfectly)

  When I press the button on the Fax, the printer prompt if the document is on "glass", I confirm, start creshes scanner and printer. All the lights start flashing and displays "error 79, restart printer. After a few seconds of printer restarts.

  Also, I unplugged the power cord and plugged into the Jack at the end of a few minutes...

  Print and scan using Windows does not always work, but my favorite software is on my Mac.

  With my Mac OS X computer, one feature of printing now works fine, scanning software can't find any device with Hello (all services are enabled on my printer!). I downloaded the last software OS X from HP.com, uninstalling the old drivers and the software, installed a new... but the scanner and the HP Utility software does not always work correctly.

  I also do a "reset" on the main parameters in the menu of the printer, but nothing has changed (lost network configuration and fax settings).

  Printer runs the latest version of the firmware available on the Web from HP.com site. I've never had no problems during the update process.

  Do you think that my printer needs to be repaired?

  In this period I need really the printer and a scanner for my important documents.

  

  Called technical support.

  Turn off the device, then:

  -Press x and > at the same time (hold)

  -turn on the printer

  -Press and hold both buttons and wait for the message "restore" on the screen

  -wait, wait... When you have finished starting printer new