LaserJet Pro 200 M276nw: lost password cannot reset the printer

Similar Questions

• Service error 49 - Turn Off, then on - LaserJet Pro 200 M276nw

  I was the addition of another post for a different printer but didn't want to Miss anyone with MY printer problem.

  UPDATE * (at least for my LaserJet Pro 200 M276nw)

  I found the cause but will need help from someone at HP to "solve" this one...

  My new guard M276nw throw a 49 Service error, CAT has given a lot of power, voltage on, wait, try again blah blah blah, blah blah fuser problems. 10 minutes from the forum search put me on possible wireless network issues with other printers and the SSID. Anyway after regaining a printer Staples and saw the problem coming up again on a new another brand... I tried the search Forum and Tada! at least I was able to find a cause.

  I have a D - Link DIR-825 wireless router. He has dual band (2.4 GHz and 5 GHz).

  Normally I enabled for the multitude of devices that people have these days in my house.

  I updated the firmware to the last update (20121026) and then restarted.

  Roger restarted shortly after error Service 49.

  Then I disabled the two strips to test each independently wireless band.

  The printer acted normally so I decided allow each band separately.

  When I turn on the 2.4 GHz band in the router, the printer immediately throws an error in Service 49.

  I tested several times (5 to be exact) and every time when the router restarts the printer says error.

  So, I left off 2.4 GHz band and then the 5 GHz band.

  I activated the band 5 GHz 3 times and turned off and found no effect on the printer (at least in a 5 minute window).

  So now I'm left with only a single band wireless router or printer who likes to turn on every 20 minutes or more.

  There is probably a setting (or 2) which can be changed in the router or printer that can prevent this (I hope).

  I just need to find the right person in HP...

  I should have updated this thread I'm sorry, but I found myself updated the same problem on another thread of printer M251nw, since someone has answered that one. I have to keep that one thread - sorry, but it seems to me that I just heard another as well, but for a m475dw as well. Maybe the same problem that I don't know.

  Anyway to update my m276nw situation: After experimenting for a while try to limit I decided to eliminate the possibilities by disabling my router another suggestion of posters to remove the printer from the wireless environment and reset to factory settings. So I turned off my 2.4 GHz band in my router (leaving 5 GHz active), reset the printer and it was sitting still (no reset), he even went to sleep normally. I turned on the 2.4 band and the printer immediately threw the error repeated tent kept the same result no way to leave on the 2.4. The next day so I decided to check my router and found 2 year old firmware. It took several updates to get current and on the last I didn't reset the printer to the factory again and there's no error yet. The printer acted normally for a week, he normally sleeps and wakes. It was turned off (on purpose) a few times and everything seems normal.

  I have not activated wireless again since my house is wired and I could really do without wireless capability, but eventually I want to know.

  My DLink DIR-825 router is still active with both tapes, but using the latest firmware, like the new printer (the other). Is all this took?

  Perhaps.

• Not connected HP LaserJet Pro 200 M276nw

  Hello! I have the Setup:

  OS: Windows 7,.

  Router: TP-LINK TL-WDR4300

  Printer: HP LaserJet Pro 200 M276nw

  Freeware antivirus: Avira

  Firewall: Windows

  The computer connected to a network via ethernet. I installed the network printer (port TCP/IP wirewless, user good reading/writing, shared printer, 6 PLC) and printed all documets in 2013 of Word, it's ok.  After restart of the operating system, printer of the icon is grey and the State not connected. Please help me. Impression of uninstall and install now, Stoped ptrint service, coil clean, reserved IP address of the printer, it all no results.  Some other customers printed successfully via wireless to the printer.

  Hi @green_wanderer ,

  I see that you are having problems printing via the wired or wireless network after restarting the computer, the printer icon is grayed out and showing not connected, but can always print from other computers. I want to help you solve this problem.

  Is the installation of the printer wirelessly or through an Ethernet connection?

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  I would have to power cycle the router, the computer and the printer to see if it will help.

  Print a configuration page to check the firmware version and see if you have a valid IP address.

  If you have a valid IP address for the printer, then try and access the webserver shipped off to the printer, to see if the printer is still on the network. Type the IP address in the address bar of your web browser. (Internet Explorer)

  The IP address of the port on the computer can be different, if the printer has been assigned a new IP address of the afer by restarting the computer. You will need to create a new port, or run the Add Printer Wizard.

  Other computers that are still able to print could have the port configured to print if IP address changes.

  Print a configuration page to obtain the IPv4 address of the printer and the date of the firmware. Printing a Configuration report.

  The new Version is 20140919.  I've provided the URL if you have an old version of firmware update.

  HP LaserJet Pro 200 color MFP M276nw drivers.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  If the problem persists, install a static IP address to see if it will help.

  Printer does not maintain a Wi - Fi connection. Proceed to Solution 3: printer of the assign a static IP address.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you need help, let me know.

  Good day!
  Thank you.

• Unknown origin of black sheet pulled from a HP LaserJet Pro 200 M276nw

  We got a paper jam on our printer. One of our employees then pulled this black sheet of our HP LaserJet Pro 200 M276nw. This could really be an original work of this printer? Never seen such a thing before, mayby it's just a few packages that I have inside? The printer does work more (paper jam error). Thanks for helping out.

  

  Hi @VL14 ,

  I see by your post that you had a paper jam and the black sheet was removed from the HP LaserJet Pro 200 M276nw while removing the jammed paper. I would like to help.

  Yes, this part sounds like something to do with the material of printers. The printer would need to be repaired.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great day!
  Thank you.

• Mac OS x print duplex LaserJet Pro 200 M276nw

  I recently bought the HP LaserJet Pro 200 M276nw understand that I would be able to do manual duplex printing. However, after reviewing the instructions in the manual and try to understand through various blogs I can't always manually duplex.

  The instructions say that I'll be able to select manual duplex in the finishing menu under Print... However, there is no such menu for me on any program and the "double option" is grayed out. Please advise otherwise I might have to return the printer to find something that will work with printing recto verso or auto manual.

  Hi wegotjoy,

  I see by your post that you are unable to print double-sided on your Mac.

  Check the name of the driver that is installed by the printer. Airprint driver could be installed instead of the printer driver. (usually by default, Airprint)

  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen should display the name.

  If the name of the printer indicates Airprint, then it of the Apple drivers, remove it and add the name of the printer back in the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Now try and print both sides.

  On the file menu, click print .

  Open the final menu and click the Manual Duplex or open the Manual Duplex

  menu.

  Click the Manual Duplex check box and select a binding option.

  Click the print button. Follow the instructions in the pop-up window that appears on the computer

  screen before the battery of exit in Tray 1 to print the second half.

  If the problem persists, then download and install the printer driver to see if that will solve the problem.

  Printer HP v.2.16.1 for OS X drivers.

  What operating system do you use? Mac OS X: how to find which Mac OS X Version is on my computer?

  What is the printer name show?

  Please provide detailed results if you're still having problems.

  Have a wonderful day!
  Thank you.

• Printers Multifunction LaserJet Pro 200 m276nw: memory is low. Job cancelled

  Hello

  I'm new to the forum.

  I have a problem with my Laserjet Pro 200 with a message "memory is low. Cancelled work. »

  I read the other posts with similar questions and tried to do a hard reset to turn on him for 30 second and turning point. The message always appears.

  I tried to update the firmware, but the printer says that no updates are.

  I use a Mac Mini running on 10.9.5 software. I tried to update the firmware via USB, what has not worked at all.

  How can I access the memory of the printer and clear the whole print or add memory to the printer?

  I need help!

  Hi @Med_Stud10 ,

  I read your post and see that you have found an "Out of memory" error when you try to print. I will definitely do my best to help you.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet M276)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver, you may need to click the drop-down list to select the printer name to add it in.

  Try to print again.

  I've provided the steps to set up the printer via the IP Protocol, if the problem persists, which regulated the other 'Out of memory' errors

  Print a Configuration page to get the IP address of the printer. M276n of MFP HP LaserJet Pro 200 color and M276nw MFP - print a Configuration report.

  Remove the printer in printers and Scanners.
  Click on the + button, select the IP Protocol on top, type the address IPv4 of the printer, select Jet Direct below and then apply.

  Try to print again.

  For the analysis, however, you can select the printer Hello.

  If you're still having problems, try the reset I will send you a private message.
  In the forum next to your handle name simply click on the envelope to see.

  Please let me know the results.

  Good day!
  Thank you.

• Color LaserJet pro 200 M276nw MFP - Scan configuration and installation on Mac Yosemite

  Hi all

  I just bought a new LaserJet pro 200 color MFP M276nw and I am trying (for 4 days) to coorectly install it.

  My goal would be to use it via the wifi connection and I put it correctly by the façade.

  When I try to install the printer on wifi, I can install the printer driver, but I can't find the driver for scanning.

  I tried to connect by ethernet and the system to emphasize a multifunction scanner and the printer driver. If use them, it works correctly.

  Whenever I go out the lan cable for use in wifi it lose the scan functions.

  What I am doing wrong?

  Thank you

  Gianluigi

  Hi @gianluigi1982 ,

  I see that you have problems with scanning via the wireless network, but you can scan through an Ethernet connection.

  I would like to help.

  Do you have what drivers installed the printer? (Apple update or the 10.9 download drivers)

  I checked our laboratory with 10.10 installed on this computer and I was able to browse for printers and Scanners on the wireless network.

  Check the version of the driver installed.

  Go to the Apple preferences system, printers, and Scanners, highlight the Laserjet printers, click the print tab on the right side of the window, and select the Options and supplies.
  Under the general tab it will give the list the version of the driver.
  19.9 is one on the lab.

  Which driver you have show?

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (MFP Laserjet Pro 200 M276)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  In the printers and Scanners window, highlight the printer on the left side, to the right of the window, you should have a print/scan tab, click Scan, and then open Scanners and test scanning. If you do not have the scan tab, let me know.

  

  Have you added the printer as your Hello or via the IP protocol? (cannot scan through the IP Protocol)

  You use the automatic IP address or your own static IP address?

  Here is some information for scanning in OS X v10.10 Yosemite without software HP.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• LaserJet Pro 200 M276NW color does not print more than once; application freezes

  Hello.  I had a problem with Laserjet Pro 200 color M276NW my family when printing from my desktop Windows 7 (64 bit) for quite awhile.  The first time I print a document after starting my computer, it prints the entire document very well.  However, the print jobs will simply freeze the program that sent them (for example Outlook, Opera, etc.) on a screen ' print the page of.  Also, I can't print a test page in Windows when the first task is completed.  I finally realized that it probably has something to do with the spooler service in Windows, or in the print queue.  When I look in the queue after printing the first document, it shows that the paper in it, but the new job that froze my app does not appear.  After I restarted my computer, I can print a document more before I have to restart again.

  The printer is networked on our home network; It is not connected to any computer via USB, and in my opinion, is the connection to the ethernet router.  My computer is connected to our network via a wireless connection.  I tried to restart the spooler, enter the IP address of the printer in my web browser (which works fine and shows the right page), and everything else listed in the Help article.  Try to open the printer properties in devices and printers does nothing.

  To complicate, the printer won't even print the first work since I got on my computer and I tried this today.  Also, I got exactly the same problem on my laptop, which also used Windows 7 and connected to our home network wireless. The laptop now has Linux on it instead. I tested several printing on it earlier and they print very well.

  My father, who has a wired connection to the router, told me that it is able to print more than one job very well.  I just had my brother (who also has a wired connection) print two different documents, and it has worked very well.  This leads me to believe that there is somehow something to do with the Wi - Fi computer assigned to the router, in combination with Windows 7, apparently.

  Moon Raker, starting with the sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

• LaserJet Pro 200 m251nw: how to disable these pages printing pesky notification?

  I just bought the LaserJet Pro 200 m251nw to help with homeschooling and coupon printing. A big HUGE machine so far, one small complaint... whenever I have do something or something (ie: plan a printout of the spreadsheet on an app) Springs this page full color printing. I don't want to lose my ink telling me I just do what I know already! Can I disable it somehow? Thanks in advance!

  Hi @g33kyg1rl

  Welcome to the Forums of HP's Support.  I see you want to learn how to turn off notifications in HP connected for your Laserjet M251nw printer.

  Please follow the steps listed below:

  1. Connect to your HP account connected, which will take you to the Welcome screen.
     
     
  2. Please click the drop down arrow next to 'Settings' menu and choose 'Notifications '.
     
     
  3. If please check or clear the parameters of notifications that you prefer and then click on "save changes".
     
     

  Please let me know how it turns out.

• LaserJet Pro 400 m425dn lost - password reset?

  Hello

  We have a LaserJet Pro 400 m425dn.  Someone put a password, so we cannot access the settings.  How can we remove the password - a full factory reset would be fine. I tried to Flash the firmware via a USB cable, but the password remains in place.

  Thank you

  Mike

  I understand how frustrating it is, but since it is a security feature, it is best to not to broadcast how do to reset the password online.  I recommend you call the call center, so they can walk you through it.  The numbers are on this page:

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

• LaserJet Pro 200 M276nw: Scans can be recovered from the internal memory to a Laserjet Pro 200 M276nw?

  Hello.

  I wonder if a tech-savvy person would be able to recover scans of the internal memory of the all-in-one M276nw?

  As in, is it possible that confidential info of the analyses could be recovered by the unit once it has been sold, recycled, etc.?  I wouldn't see my Bank and that operations that no info there...

  I guess it's not as simple as pushing "get it back" in a menu, but someone with a material and ill intentions would be able to sort?

  If it is possible, how do I clear it?

  Thank you very much

  Hi @e9999 ,

  I see you want to erase the internal memory of the printer. I can help you.

  I can send you this information in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  Good day!
  Thank you.

• Color LaserJet pro 200 M276nw: color LaserJet pro 200 MFP M276nw network installation problems

  Set up the printer correctly. Has chosen to use the Wifi option. Wireless computers are able to print to it without problem. Went do my first scan, and it tells me to set up printing to the network drive. So I will do this, and the software HP on the host computer (with USB connection) told me that it can configure not unless that is the printer is connected to a network.

  Obviouslly, it is connected to a network...

  Then disabled Wifi. Is turned off the printer. It connected to the router. Running. And still get the error message. Besides, cannot be found in the menu of the printer (on printer) where I can "setup" a wired connection.

  I'm a nerd of the computer, but for some reason i gots the mute today. Some advice would be appreciated - about the printer that is.

  Oh. You say to add the printer a network rather than USB printer. DOH. So simple. Thank you!!!

• Color Laserjet M252dw: Cannot reset the printer

  I'm unable to access the configuration screen to reset my printer because I keep getting prompted for a password that I unfortunately forgot the setting.

  How can I reset my printer in this situation? Thank you.

  Try the lower-left corner of the menu for a great memory NVRAM reset. The same procedure as above, except that you press the left instead of the right.

• HP Laserjet Pro M451dn: Problem on a computer with the printer fonts

  Hello

  We have three computers that seem to be running the same configuration.  The problem occurs with Microsoft Publisher as follows:

  -On both computers, when specific documents are called, they work fine and fine print

  -A computer, when particular documents are called, we get the error: "load fonts - information on the police below shows what fonts are embedded in your publication or are unavailable - Goudy/unknown/not available & Goudy ExraBold/unknown/not available."

  I checked all computers and confirmed that the same TTF are installed, even to copy fonts goudy from one computer to another to ensure that they are the same.

  When I go into one of the computers that work and look at the "commercial fonts" section in Microsoft Publisher, it tells me that:

  Police = Goudy

  font type = printer

  Police source = system

  Police = Goudy ExtraBold

  font type = printer

  police source = system

  I tried to install the latest drivers for the M451dn of Laserjet Pro, but the fonts are not yet available. I have no idea on how printer vs TTF fonts. If it were an FTT, I would simply copy, but I don't know how to fix this computer to access the printer fonts.  Any help will be greatly appreciated.

  Thank you

  Jeff

  > fonts, I'm looking are listed as "Additional PS emulation fonts" for a different model printer.  When a non-PS driver is used, the driver can always access these fonts...

  I don't know for certain, but I guess these "Fonts additional PS emulation" can probably be used only if you are using a PostScript printer driver.

  If you use a printer PCL5 or PCL6 (PCL XL) driver, then these policies probably are not accessible.

  EDIT: I found an online source for one of these PS_12542.ttf (= Goudy) fonts, and it doesn't seem to be a valid TrueType font that (in theory) can probably be used by other pilots.

  But this policy has a "limited" license, which means that it cannot be incorporated in the documents:

  

  It is possible (probable?-I don't know) that support routines and standard printer drivers that you cannot use this policy as a "source" for temporary downloaded fonts "smoothly."

• LaserJet Pro 400 M451dn: Problems copying documents from the printer scanner

  I use a Mark II of Canon Canoscan 9000F scanner to scan documents and copy them into the HP LaserJet Pro 400 451dn color laser printer.  I use the 'Copy' button on the front of the scanner function.  When a color or photo document is scanned this way the red and blue colors are reversed when it comes to the printer off.

  Both the scanner and the printer work perfectly in all other situations.

  Somehow the red and blue colors are to be swapped when a document goes to the scanner to the printer.

  I called the Support Canon technique and they told me that they have never heard of this problem and have never had it reported before.  When you use the "Copy" button function there is no setting that can be done. The scanner copy what he sees.

  So why the red and blue are exchanged on the printer?

  Teknishun

  What happens if you scan the document itself to the computer and then print the scanned copy? If it is ok, then the question must be the scanner software which sends the document to the printer and has nothing to do with the printer. Sorry, but it's a hot issue.