LaserJet Pro 200 scanning options

Similar Questions

• LaserJet pro 200 scans by charger are not straight

  I recently bought a laserjet pro 200.  When I scan using the plate scans are perfectly straight.  No matter what I go through the document feeder, the documents appear on the screen at a slight angle.  Is there a way to align the feeder so that scans out of lines of e/s biased?

  Hi rondip,

  I understand that you have a Laserjet Pro 200 which is not pulling the paper correctly in the ADF (ADF). I'm sorry to hear that, but I'll certainly do my best to help you!

  Even if the printer is new, it is possible there is something on the rollers that inclines the way pages are drawn in the charger. I will suggest that you follow this document "Document Feeder Mispick" Message appears on the control panel and the ADF is not Pick Up paper or feeds on several Pages to help solve your problem.

  Hope this helps, have a nice day!

• Touchscreen printer LaserJet pro 200 scanning problem

  Printer is HP laserjet pro 200 color MFP m276nw; operating system = windows 7; = error message when I try to scan from the printer pad touch I get the following error: this feature requires the printer to be connected to a network.  I don't have a network.  I have the USB cable connected directly to my turn.  I can scan the computer very well, but not the touch screen. No new software has been installed one that came with the printer.  Does anyone have a solution to my problem?

  Hello

  The Laserjet software only allow scanning the computer using the HP scanning software.

  The digital scanning to a network shared folder allow the printer connect to a shared network folder by initiating sweeping the screen of the printer, this feature only supported by a network and not thrugh USB connection direct connection.

  You can find more info on scanning to a network foldr on page 72 of the user below guide:

  http://h10032.www1.HP.com/CTG/manual/c02851622.PDF

• no WiFi in the Laserjet pro 200 M276n option

  Hi all

  I have just purchase HP Laserjet Pro 200 color MFP M276n, I managed to install and print documents using the USB connection.

  However, the printer is equipped with WiFi option that let's you connect the printer to a wireless network, or print directly from a WiFi device (smartphone, laptop, etc.).

  The problem is, I can't turn on the WiFi option. In fact, there is no option on the control panel of the printer for wireless connections.

  The manual gearbox and hp.com site all indicate that this model has a wireless connectivity. Even when I turn on the printer, I can see that there is a small WiFi symbol that lights (blue) on the control panel of the printer, which indicates that the printer is equipped with WiFi connectivity. But the light goes off again after that the printer is on and I can't find a way to turn it on.

  Help, please

  Thanks to you all

  The section of the overview of the specification document for the LaserJet Pro MFP color 200 M276n States:

  ""Set up and share anywhere in the desktop with Ethernet wireless and high connection".

  but this phrase is qualified with two links to notes; the second of these information States:

  "Wireless direct printing, HP Auto Connect Wireless and integrated wireless connectivity are only available on the HP LaserJet Pro 200 M276nw MFP color"

  If your model of "n" has no wireless capability; you need the model "nw".

• Multifunction color HP LaserJet Pro 200: Scan problem tray

  I'm having a problem with the scan on the all in one tray. Basically I never scan A4 paper (wireless), but once the data transmitted from the printer to the pc, I find that the PDF version on the screen is too long. I then have to manually crop the size down to A4. It might not seem that a huge problem when say you scan one or two pages, but when you have a whole pile of documents to download, cropping manually each size takes a lot of time. The scanner never used to do this, it's past numbers. I'm using the wrong settings or y at - it something wrong with the scanner itself?

  Well, this should solve your problem:

  Make sure that the printer is plugged directly into a wall outlet, not a surge protector.

  1. Open HP Scan.
  2. Click on the gear icon.
  3. Click on the harvest.
  4. Select A4.

  Please let me know the results after following the above. If you can properly analyze, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Color LaserJet pro 200 M276nw MFP - Scan configuration and installation on Mac Yosemite

  Hi all

  I just bought a new LaserJet pro 200 color MFP M276nw and I am trying (for 4 days) to coorectly install it.

  My goal would be to use it via the wifi connection and I put it correctly by the façade.

  When I try to install the printer on wifi, I can install the printer driver, but I can't find the driver for scanning.

  I tried to connect by ethernet and the system to emphasize a multifunction scanner and the printer driver. If use them, it works correctly.

  Whenever I go out the lan cable for use in wifi it lose the scan functions.

  What I am doing wrong?

  Thank you

  Gianluigi

  Hi @gianluigi1982 ,

  I see that you have problems with scanning via the wireless network, but you can scan through an Ethernet connection.

  I would like to help.

  Do you have what drivers installed the printer? (Apple update or the 10.9 download drivers)

  I checked our laboratory with 10.10 installed on this computer and I was able to browse for printers and Scanners on the wireless network.

  Check the version of the driver installed.

  Go to the Apple preferences system, printers, and Scanners, highlight the Laserjet printers, click the print tab on the right side of the window, and select the Options and supplies.
  Under the general tab it will give the list the version of the driver.
  19.9 is one on the lab.

  Which driver you have show?

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (MFP Laserjet Pro 200 M276)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  In the printers and Scanners window, highlight the printer on the left side, to the right of the window, you should have a print/scan tab, click Scan, and then open Scanners and test scanning. If you do not have the scan tab, let me know.

  

  Have you added the printer as your Hello or via the IP protocol? (cannot scan through the IP Protocol)

  You use the automatic IP address or your own static IP address?

  Here is some information for scanning in OS X v10.10 Yosemite without software HP.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• LaserJet Pro 200 color M27nw: Scan works in wifi and not available on USB key intermittently

  I am a M27nw of Color LaserJet Pro 200 and under Mac OS X 10.10.  The printer connects OK via wifi, but the analysis fails often.  Sometimes it hangs and fails when parsing the preview.  Sometimes the scanner window opens but nothing happens and everything is grey.  And then, sometimes, it works!

  When I got the printer I have connected via wifi AND USB port to a Time Capsule.  It used to work and when I opened the Printers & Scanners on my Mac I see print and Scan option.  Now, on the port USB connected for this printer, there is NO scan option.  I can't understand why he won't do it and how to get the option scan via the USB connection.  Please help someone!

  Hi @kbolenba,

  By your post, I see that you have problems with scanning by wireless and USB connection. I want to help you.

  Connect the printer directly to the Mac and add the printer again. Then test scan.

  I also suggest you do the following to help resolve the problems of scanning wireless.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If there is anything else I can help you, let me know. Thank you.

• Print on the two option (duplex) sides missing Mac 10.8 for LaserJet Pro 200 M251nw

  I just purchased and installed a printer LaserJet Pro 200 color M251nw.

  From a Windows 7 machine, the properties of the printer box allows an option (I think on the finishing tab) for printing duplex (manual), which when used will then display a screen printing by telling you how to remove paper from the output tray and reload at the entrance, then press ok to continue with the other side of each print sheet.  I tried my laptop and it works fine.

  Even if it is a manual process for this printer, I would really like to be able to do when printing from my Mac, but it doesn't seem to be a way to select duplex printing.  Is it possible to have this feature?  Is there something I need to set differently on the printer?  It would be really useful.  Thank you.

  Hello
  The two-Sided feature reffer automatic two sided printing.
  As the specific device provide printing manual duplex only, you can perform duplexing manual as follows:
  
  In order to perform manual duplexing, Joanie you use the Pages to the printer setting, you will find listed in the manual duplex printing sectiong below:
  http://support.HP.com/us-en/document/c01663233
  
  Kind regards
  Shlomi

• Color LaserJet Pro 200 M27nw MFP - problem scanning ADF

  Seems to me a new Color LaserJet Pro 200 M27nw MFP running on a PC with Windows 8 and have come to realize that whenever I scan from the ADF Document (CAD), no output file is generated. The original document is drawn in by the document successfully feeder and the printer display indicates that the scan is ready. However, no analysis file is generated. This happens regardless of know if I send the output to USB or to e-mail and if the original document leaves simple or multiple.

  Interestingly, the ADF works fine if I try to produce paper copies, in other words, the printer is able to pull in the leaves o FRENCH original of the document in the ADF (as this either alone or several sheets) and to produce copies of the original successfully. Furthermore, I have no problem to scan multiple or single sheet documents when the original document is loaded by the Scanner flat, rather than the document feeder Scanner.

  Appreciate any help. Thank you

  Stephen

  HI @StephenScerri ,

  I see by your post that when scanning from the ADF there is no output file containing the scan which is generated on USB or e-mail. You can copy the ADF and scan successfully of the bucket. I would like to help.

  Is this printer the Pro 200 M127nw MFP Laserjet

  I have provided a document for how Scan: Windows 8

  When you scan from the magazine, you get an overview of the analysis of the computer software?

  What is the scan preview, but do not save it to the computer?

  What software are you using to scan?

  Try saving the scan on the computer, if you get a preview, to see if it will save the scan it.

  Please provide detailed results if you're still having problems.

  Have a great day!
  Thank you.

• Multifunction color HP LaserJet Pro 200: HP LaserJet Pro 200 color MFP M276nw on El Capitan: Scan does not

  Since my upgrade to El Capitan my USB connected HP LaserJet Pro 200 M276nw MFP color analysis no more.

  What I've tried so far:

  Installed the latest drivers > unsuccessfully

  Tried all the solutions suggested here: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-LaserJet-Pro-200-color-MFP-M276nw-Scanni... > no success

  Have any suggestions what to do next?

  Update: the solution provided in this thread solved my problems:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/HP-LaserJet-2300-not-working-with-El-Capitan/m-p/5281267/highlight/true#M61077

   

• HP laserjet pro 200 color mfp: hp laserjet pro 200 color mfp scan show m276nw

  Hi I have a problem to use the scan software from my PC to scan the document and save it to my PC. Whenever an error message pop up: inaccessible Scanner.

  I use wireless and print without any problem, even I disable the firewall and connect with the printer cable, it still does not work. Please help me to solve the problem, I use the scan function a lot. Thanks in advance.

  Hi @RightOnMoney,

  Welcome to the Forums of HP Support!

  I see that you are having problems scanning with your HP LaserJet Pro 200 M276 MFP printer color. I'd be happy to help you with this.

  If you are able to print, but can't scan. It seems that the HP software is corrupted.

  Printing and scanning doctor may be able to correct the problem for us.

  • Please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.
  • What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If printing and scanning doctor does not resolve the problem, please uninstall and reinstall the HP software.

  • Monofunctional and multifunction printers - HP printer software uninstall.
  • Important! Please use the printer Install Wizard. The HP printer installation wizard detects automatically the best print available for your HP printer driver. Download and run The Installation Wizard for printer () a free tool from HP. When you click this link, HP printer installation wizard is downloaded using the download of your Internet browser capabilities.
   

• HP LaserJet Pro 200 color M25: installation printer HP Laser Pro 200 M251nw.

  M251nw color HP LaserJet Pro 200 No. product installation. CF147A: Installer said he has successfully installed my printer, but then the printer to add it to the window that says it can't find printer.  HP said I have to get my license from Apple. Apple says that I have to get my HP permit

  Hi @steeldrv ,

  I understand that you are having problems, adding the printer on Mac. I will do my best to help you.

  How is the printer connected? (USB, Ethernet, WiFi)

  I checked online and there is a form available full functionality driver HP.

  What is the software you have installed already, who says it was successful?

  HP LaserJet Pro 200 color M251 full set Solution software - Mac OS X 10.6, OS X 10.7, OS X 10.8.

  Try the following steps:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Were you able to find and add the printer in?

  Print a self-test of the printer to make sure this isn't a hardware problem, causing the printer does not detect.

  Print a Configuration report.

  If the printer is networked, try and access the Web built-in to the printer server.
  Type the IP address in the address bar of your web browser. (Safari)

  It loads the page Web has?

  Please let me know the results and the way that the printer is configured, so I can provide appropriate measures to solve this problem.

  Good day!
  Thank you.

• Color LaserJet Pro 200 M251 nw: unable to do manual duplex printing with Windows 10

  Using my prior desktop computer that ran from Windows 7, I had no difficulty to do manual duplex printing on my HP LaserJet Pro 200 M251 nw color.  However, having recently bought a new desktop computer running Windows 10, I have more two-sided printing option.  Instructions to Guide the user to http://h10032.www1.hp.com/ctg/Manual/c02886939 are unnecessary because I cannot complete step 3, click Finish.  After completing the first two steps by clicking on file - print and then click Properties or preferences, I am not provided with an option to "print on both sides (manually)" as described in the User Guide.  How can I get manual double-sided printing capability on Windows 10?

  Usually when you have a driver problem, it is best to find the current driver on the HP website, disconnect the printer from your PC, remove the existing driver, and then install the current driver.

  Windows often installs drivers that do not support as many features as the downloadable driver.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• Not connected HP LaserJet Pro 200 M276nw

  Hello! I have the Setup:

  OS: Windows 7,.

  Router: TP-LINK TL-WDR4300

  Printer: HP LaserJet Pro 200 M276nw

  Freeware antivirus: Avira

  Firewall: Windows

  The computer connected to a network via ethernet. I installed the network printer (port TCP/IP wirewless, user good reading/writing, shared printer, 6 PLC) and printed all documets in 2013 of Word, it's ok.  After restart of the operating system, printer of the icon is grey and the State not connected. Please help me. Impression of uninstall and install now, Stoped ptrint service, coil clean, reserved IP address of the printer, it all no results.  Some other customers printed successfully via wireless to the printer.

  Hi @green_wanderer ,

  I see that you are having problems printing via the wired or wireless network after restarting the computer, the printer icon is grayed out and showing not connected, but can always print from other computers. I want to help you solve this problem.

  Is the installation of the printer wirelessly or through an Ethernet connection?

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  I would have to power cycle the router, the computer and the printer to see if it will help.

  Print a configuration page to check the firmware version and see if you have a valid IP address.

  If you have a valid IP address for the printer, then try and access the webserver shipped off to the printer, to see if the printer is still on the network. Type the IP address in the address bar of your web browser. (Internet Explorer)

  The IP address of the port on the computer can be different, if the printer has been assigned a new IP address of the afer by restarting the computer. You will need to create a new port, or run the Add Printer Wizard.

  Other computers that are still able to print could have the port configured to print if IP address changes.

  Print a configuration page to obtain the IPv4 address of the printer and the date of the firmware. Printing a Configuration report.

  The new Version is 20140919.  I've provided the URL if you have an old version of firmware update.

  HP LaserJet Pro 200 color MFP M276nw drivers.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  If the problem persists, install a static IP address to see if it will help.

  Printer does not maintain a Wi - Fi connection. Proceed to Solution 3: printer of the assign a static IP address.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you need help, let me know.

  Good day!
  Thank you.

• LaserJet Pro 200 MFP M276

  Hello

  I bought a Laserjet Pro 200 MFP M276 for small business a few weeks ago.

  I can't set up scan to email on our established network...
  Our IT guy gave us a number IP, GW, and SM... but I can not drive where these entries and make it work?

  We want unity do scan to email - one of the computers is based in another State, so he needs to go through the network.

  Help?

  Hi @Schnickers ,

  I see you are having problems setting up scan to e-mail for the Laserjet Pro 200 MFP M276. I will definitely do my best to help you.

  I have provided a document to configure the scan to e-mail settings.

  Scan from the control panel (including the Scan to Email, in PDF format, and to a network folder) for HP LaserJet Pro 200 Color MFP M276n and M276nw.

  What operating system do you use?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  How to find the Windows Edition and the Version on your computer.

  If you need help, let me know.

  Good day!
  Thank you.