laserJet Pro 400 color: printer

Hello Mr President
I want a help on your part I have a Color LaserJet Pro 400 m475dw MFP
and when I turned it on. I show masseage like this {10.1002 electric memory error}
How can I solve this problem, Mr President

Hello Sir,

The error that you expose is a problem with one of the toners.
The magenta to be precise.

In this case, the recommended action is to replace the magenta toner with an original RESUME.

Kind regards

Tags: HP Printers

Similar Questions

  • Help! My M475dn MFP HP LaserJet Pro 400 color printer will NOT print!

    HP LaserJet Pro 400 color MFP-M475dn-CE863A

    Printer on a network and can connect to multiple computers that include: Mac OS X, Windows 7 and Windows XP.

    When I try to print from my iMac, the print queue of the printer says "the printer is not connected.  When we try to print from Windows computers, it is in the right queue and does not print.  When I go the printer itself and try to print a page of demonstration or page supplies directly to him, it says on the screen which is printed, but nothing happens.  This is not hum or anything!  The port where the network cable is connected is switched on green that says HP which means that the network cable is connected.  We've had this printer for a year now, and something like that never happened.

    I did not have any software or anything like that until this happened.  It was working fine on Saturday when we used it, but when we arrived at work today, he just decided that it would interrupt printing!

    I'm puzzled!  I tried 'ping' IP address of the printer from my iMac and it pings fine.  Does anyone have advice?

    (I tried to make of the obvious like too switch the printer on and off and shutting the computer down and nothing!)

    Okay, so I feel a bit stupid right now.  I decided that I would be closed the printer for about an hour to see if it was there, and what you know-it has been!  I had to turn it off several times before but I guess it wasn't long enough.  What a pain!

    Thanks to everyone who took the time to read this!  Sorry to waste time everyone!

  • turn off the broadcast without wire - HP laserjet pro 400 color mfp m475dw

    How do I disable broadcasting SSID for HP laserjet pro 400 color mfp m475dw.  I disabled the configuration via the web console wireless printer, but it is still broadcasting.  I also updated the firmware to 20131028 last available.

    Since it is wiered one of the scenario, I could solve this with the help of the HP Support is by doing factory reset/NVRAM reset the unit by turning the printer and holding right arrow and cancel on the touch screen of the device (cancel is on the lower right of the touch screen on the black area and right arrow is just above him (one in the middle of the Panel) in the same black box) and the device of turning on until the message something like storage reset... is displayed and can release the two buttons/zone button.

  • Bought HP Laserjet Pro 200 color printer & unable to connect

    Bought HP Laserjet Pro 200 color printer & unable to connect to my Windows 7 laptop. The printer setup was a snap, but no connection. Tried all Windows resources, but...

    Most often when a device does not work, it's because the driver has been corrupted.

    Try reinstalling your.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

    http://captaindbg.com/how-to-update-drivers-on-Windows-7/

  • I get a pcl xl error message when we print our LaserJet Pro 400 Color MFP

    When I scan or fax, we get:

    PCL XL Error

    Subsystem: TEXT

    Error: InternalError 0 x 50

    File name: cheettext.c

    Line number: 710

    The printer is a Pro 400 Color MFP LaserJet - m475dw

    Windows 7 Professional Service pack 1

    What should I do to fix this?

    Thanks for the help.  I actually did an update of the firmware and it solved the problem.

  • LaserJet Pro 400 color m451dw: printer Laserjet Pro 400 color m451dw for window 10 drivers

    I can't find the drivers for a m451dw Color Laserjet Pro 400 running on Windows 10.  The only available operating systems are Mac.  Is there another place to look for drivers window other than the drivers regualer section 10?

    10 64-bit Windows

    http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4192

    10 32-bit Windows

    http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4191

    ------------------------------------------------------------------
    Say 'Thank you' by clicking the Bravo (Thumbs up) button in the post helped you.
    Please indicate the position that solved your problem as "acceptable Solution".

  • grinding noise when my HP LaserJet Pro 400 color MFP M475 calibrates

    When my color HP LaserJet Pro 400 MFP M475 recalibrates, I get a grinding or gear sliding noise.  No idea how to fix it or what to look for?

    Noise problems are difficult to troubleshoot remotely and they could easily mislead even when we are near the unit.

    Please confirm if the noise is a squeak or a noise squeky/hum.

    As you mentioned that this happens only during calibration, it is why I suggest you to double check & validate your toner cartridges.  Among the toner cartrdige is maybe defective and causing this problem.

    If not the toner cartridge, then it would be one of the components of hardware printer that is at issue, where a Tech HP may need to perform a physical inspection of the aircraft and the error condition.

  • LaserJet pro 400 m451nw - Print is too dark

    I have a LaserJet Pro 400 M451nw color, and every time I print any type of blue, it prints really dark.  Tonight, the blue on my monitor was a royal blue, and blue printed was almost black. I reduced the blue on the graph, but it's still not royal blue.  The program I use is MS Publisher 2013.

    Is it possible for me to adjust the parameters of the cyan cartridge, so it will not print so dark?

    Thank you

    SHJ

    Hello ayligcjdesign,

    Welcome to the HP Forums.

    To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

    Thank you for your time.

  • HP LaserJet Pro 400 color M451dn

    Hello..

    I just want to know if I'll be able to print using color HP LaserJet Pro 400 M451dn, even if a toner is empty.

    Need to answer you as soon as possible... IM planning to buy one. Thank you

    If one of the (black) toner cartrdige is complete, then printer stops printing.

    You can continue to print with black, if one of the color cartridge is very low.

    Please check the following link for configuring power settings to use & their meaning (System-online power settings Setup Menu) HP:

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/learnUseDisplay/?sp4ts.oid=4346082&spf_p.tpst=psiContentDisplay&spf_p.prp_psiContentDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03257478-4%257CdocLocale%253Den_US&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • HP LaserJet Pro 400 m401dne: print from Notepad

    Hello! I have a new HP LaserJet Pro 400 m401dne. Everything works fine except when I try to print both sides of a Notepad document copies. As soon as I select the duplex option, the entire document disappears. We had an another HP LaserJet only printed on one side of the paper; who would have something to do with it? Still, I have this printer on the printer list but am selecting a new. I can print any other documents on 2 sides; just don't leave the notebook. Thanks for any help you can give me!

    Thank you, HP! The warranty issue has been resolved and so was the two-sided printing problem. The technician had to install Universal printing and now I can print copies front and back of notebook and everywhere else.  )

  • Color LaserJet Pro M277DW: LaserJet Pro M277DW Color print in b & W / Grayscale only in Mac OSX PhotoShop / InDesign

    First of all, I have consulted page 123 of the manual as a response to a similar question can be a solution. The options mentioned for select tab color, and grayscale, etc., apply only to the Windows driver, not OSX.

    I use Mac OS x.  With the base driver ready to install on the Mac, there is a box of Options of the printer with a 'Black & White' checkbox is available, this will print successfully using only the black toner, in *not color managed* software, such as the preview Mac and Word, etc.

    In Adobe Acrobat, Adobe InDesign, Adobe Photoshop, even with the checkbox 'Black & White' ticked, the software continues to print in color, by substituting the safe choice 'black and white' of the driver.

    How can I force the LaserJet Pro M277DW Color to print using only black toner cartridge in PhotoShop / InDesign / Acrobat, color managed - on a Max OSX software?

    This can be easily achieved with my Epson color inkjet printers, if I select black only - I get only a black / grey print from Photoshop / Indesign / Acrobat, why is it not an option with this HP printer? -Surely everyone needs this option B & W, a basic requirement and should have been in the design of the driver of the day 1. which option / check box / treat I'm dominant? Why is Photoshop / Indesign / Acrobat of the substitution of the option of blocking & saved from the driver?

    HELP PLEASE!

    -------

    NB. the question is not helped with the dedicated HP driver downloaded from the drivers HP page. This looks like it offers more options via a link "web-server" to the printer, but with this driver the 'black' option is totally deleted Print Options! - Neither is B & W available as a print of "web-server" Printers page, making the entiely to the useless HP driver!

    See here, it's using the dedicated downloaded driver, the B & W option is gone! -which means that I can not print even in B & W with the software not color managed (Mac Preview etc)...

    After a day of experimentation, the question was a subtle detail when you select Add a printer.

    Maybe it will help others with the same problem when using Mac OSX...

    When you add a printer in the dropdown list use, the default is Secure AirPrint, this removes the possibility to print in B & W! - and removes the other options!  Got knows why this is the default value.

    Make sure you only select the printer named on this drop down menu - the M277dw - as has pointed out below.

    The printer will then work with all available parameters - and works wirelessly (I assumed the use, it will take the AirPrint - but he doesn't - that this also removes the features; selects the actual name of the printer).

    Once this 'use' is defined correctly, the grayscale option is available via the Options of the printer in the application you are printing since then, inclusing Photoshop, etc., whew.  I also saved it as a "Preset" BW...

  • HP LaserJet Pro M277dw Color printer

    I can't install my hp color laserjet pro m277dw printer on my computer windows 10. Any suggestions?

    Hello @Scottro, greetings!

    Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice.

    I understand that you are having problems installing your printer LaserJet computer Win 10. I will definitely do my best to help you.

    What is the error you get when installing the printer? Where you can connect the printer to the network?

    Otherwise, please see http://hp.care/2dQkgAr for installation instructions. If the printer is not found while installing, perform the steps mentioned here: http://hp.care/2dQk7Nl

    Please let me know if it works for you. Thank you!

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

  • LaserJet pro 400 color: Blue lines on the right side of the page when printing in color

    When printing in color I get this blue line that occurs on the right side of the page. It is darkest near the edge and shoot low towards the printed part of the document. It is a vertical line that follows the entire length of the page. I printed a report of quality and it is always present. In my view, this indicates that it is a hardware issue, rather than software. Is there some rolls or the part that needs to be cleaned? Can you provide a link to the instructions?

    Thank you!

    Replace the cyan toner cartridge.

  • Color LaserJet Pro 400 M451dn: Print vs wireless network

    I used my printer Wireless Ethernet connection between printer and Apple airport base station. I am moving and can use printer wireless without direct connection to the router? (Printer & new router in place will be not near each other for the direct cable connection is not convenient). Thank you!

    Hello @Cary2

    No way, it's a D M451dn stands for double-sided N to the network (wired network), only the M451dw will have the possibility of having the wireless

    The printer must have a wired network to the internet permanently connection

  • HP Laserjet Pro 400 color M451dn - printing problem

    My printer is a line on the left side of the printed page.  I ran the process clean but no good.  On the printing of multiple pages, it's even worse.  Don't know where to go from here.

    To look further, I got a replacement of black toner (HP geniune).  I replaced it with your suggestion and it corrects the problem.  I am very grateful because I print various legal documents of 5 to 10 a day.  Thank you very much.

Maybe you are looking for

  • Problems with Compaq Presario 5BW220 RAM

    This office is 8 years old and supposedly supports 512 MB memory SDRAM PC100. Recently, I worked on this for my son-in-law.  It came with 64 MB of SDRAM PC100 and Windows Millennium Edition.  I tried to install 2-256 MB memory SDRAM PC133 maximum amo

  • Skype starts to run without apparent reason.

    During the month, Skype has loaded with no assistance on my end. For example, at about 4:30 in the morning while I was in my room, Skype window showed on my screen. I use Skype a couple times a year, so I have it value never automatically load at sta

  • Why my product key is invalid after I had my computer for 3 years?

    OK, I have had my computer for 3 years. I bought my new TI, but they said that I had the opportunity to make windows XP (as they said it was windows vista). If at that time, I changed it to windows XP (it was a real disc / legal). In any case, the pr

  • BlackBerry Z10 Quitar ruido camara z10

    Hola! Quisiera saber como quitar el ruido imitated al Acelerador una camara bb z10. a poco molesto poner in modo silencio cada vez as uno quiere tomar una foto. Gracias!

  • I can't access my webmail with Godaddy using Windows 8.

    Can anyone help?  The Web page expires in permanently or just revolves with the timing of goDaddy. Thank you