LaserJet Pro 400 M451dn: Problems copying documents from the printer scanner

I use a Mark II of Canon Canoscan 9000F scanner to scan documents and copy them into the HP LaserJet Pro 400 451dn color laser printer.  I use the 'Copy' button on the front of the scanner function.  When a color or photo document is scanned this way the red and blue colors are reversed when it comes to the printer off.

Both the scanner and the printer work perfectly in all other situations.

Somehow the red and blue colors are to be swapped when a document goes to the scanner to the printer.

I called the Support Canon technique and they told me that they have never heard of this problem and have never had it reported before.  When you use the "Copy" button function there is no setting that can be done. The scanner copy what he sees.

So why the red and blue are exchanged on the printer?

Teknishun

What happens if you scan the document itself to the computer and then print the scanned copy? If it is ok, then the question must be the scanner software which sends the document to the printer and has nothing to do with the printer. Sorry, but it's a hot issue.

Tags: HP Printers

Similar Questions

  • LaserJet Pro 400 M451dn: Toner HP Laserjet Pro 400 does not fit

    Probably I'm missing a small detail, but after extensive research and contemplate, I decided to ask here.

    I have a LaserJet Pro 400 M451dn, who came into my office with no toner cartridge at all. We ordered the appropriate cartridges, 305 a (checked on the box of the printer and here on the website of HP), three more black color.

    I opened only the yellow and blue, but not appropriate. In the left and right corners close, there is a piece in the tray of the printer which does not allow to slip into the cartridges. Everything seems correct with regard to the location of the electrical contacts, tabs, etc., but no amount of stirring or twist will allow cartridges to fit in the status bar to which they belong.

    I feel a bit stupid if it's something incredibly simple that I'm missing, but I want to know rather than continue to try my own solutions that do not work.

    Any suggestions?

    I don't know there is a way to get it free. I never looked at the model number on the front of the printer, but I have now. It came on the Pro 400 area (where it fit well), then glanced at, very quick inspection, like the one on the box. I worked on the wrong model of printer. It's actually a CP2025 which, of course, uses different toner.
    I'm sorry to bother you. You probably had something valuable to contribute to the world during the past days dedicated to thinking about my mistake.

  • HP Laserjet Pro 400 m451dn: How can I find a schematic or diagram for my share of m451 HP RM1-8604-000CN?

    Hello

    I have a HP Laserjet Pro 400 m451dn.  I need to replace the whole of the manual feed tray, which I think is part of the whole of the front panel.

    My printer is still under warranty, but I am doing this on my own ("self-help").  I don't want to pay $50 for shipping, and given that the main tray on the bottom still works I use it every day.

    I believe that the façade is RM1-8604-000CN, and I want to assure you that it is the right part before buy you.  Simple, right?

    HP website says I can do this.  However, when I followed the steps, this is what happens:

    (1) I have search for the part:

    (2) I click on the link "List of all parts of this product" and find a link for an Assembly of the front panel in the list. I click on it, which brings me to the next page, which has the part number and price:

    (3) because I want to make sure I got the right part, I click on the part number (RM1-8064-000CN) and the link brings me to the next page:

    (4) the page says I can "choose a product name to view a diagram with your game."   (that's what I want!)  I click on my product link (m451dn) and it brings me to the next page:

    (5) it is said to "Select a model number."  My specific model for my m451dn number is "CD957A" so I click on it, and it brings back me to the same page that I started with in step 1).  Arghhh!

    I've lost nearly two hours trying to find the diagram which says that HP is on these pages, and I'm starting to think that HP gives me just the evasive.  They claim to provide "Self-help" resources that do not really exist because they do not want users to help themselves at all.

    I don't want to deal with technical assistance to offshore.  I want to just identify the right part, have delivered to me and install it myself.

    Can someone tell me where I can find a diagram of this part?

    Thank you!

    Jim

    If you bring the printer to a certified support provider who will do the repair it should cost nothing.  Keep in mind that you have to find a provider willing to work on this printer and replace the part because there is a lot of work.  Here is a link to the service manual.

    http://www.lbrty.com/tech/Manuals_HP/M351_M451sm.PDF

  • How can I scan a document from the printer to my pc and find it once it is scanned

    I need basic step by step, I'm a newbee how scan a document from the printer to my pc and then find it once it is parsed on eprint D110 HP photosmart wireless

    Thanks for any help you can give.

    Press scan on the printer display, and then select the computer once scanning is finished it should open automatically with a default name for example scan001. If it's not automatically, you can find it in My Documents > my Scans

  • LaserJet pro 400 m425dn mfp: mfp laserjet pro 400 m425dn will not connect to the network

    I just bought a mfp laserjet pro 400 m425dn printer/phtocopier and I can't seem to connect to our network.  I have it plugged into the router and it says "cable disconnected" without an IP address.  I don't have the USB cable to configure the machine and I was hoping to do it via the network (which tells me is an option).  I don't know if that has something to do with it.

    Any help would be greatly appreciated.

    The printer should be released the box set up using DHCP for addressing.

    When plug you it into the router it should pull an IP address, if it is its cable disconnected then you might have a bad port on the router, a bad cable or a bad printer.

    Plug something else into the same port with the same cable and see if it works, if you have a defective printer and need to return it and get a replacement.

    You may also be able to find someone to replace the trainer who has the network port to it.

    If my post is solved your problem and click the accepted as button solution under him.

    In order to thank a Tech for a post click the thumbs up button under the post.

    You can even click on the two keys...

  • How to import images from the printer/scanner in Windows 8

    Windows 8 has a program to import images from a printer/scanner?

    Hi TEGKy,

    You can follow the steps described in the connection with the similar question.

    http://productforums.Google.com/Forum/#! 0Qc3joM8ZZU/picasa/subject

    http://forums.MacNN.com/t/299779/how-to-import-photos-from-scanner

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/import-pictures-and-videos-using-Windows-option/b4a82dce-7b52-4969-8af1-21eb71f160c7

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/import-pictures-from-scanner/995b5888-cd9a-45A3-ACFF-044bec24ec0a

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-in-importing-pictures-into-Photo-Gallery/32e61751-4fb9-41e3-a4fe-8aaab9c1dee1

  • LaserJet Pro 400 M401dne problem Duplex - duplex printing on its own from Windows computers.

    401dne's all jobs from two sided printing windows different computers even if I did not turn on "Print we Both Sides" in the properties of the printer from any application. I even check it whenever I print. A MacBook Pro with OSX 10.8 also have printing on this printer and is not Duplex no print jobs. Note This duplexing on its own comes in all applications (printing from IE, Office 2013 etc.).

    I upgraded to the latest firmware and update the latest drivers to print (complete solution install). A printer connected via network domestic (hard wired ethernet to the router) being accessible by two computers Windows and a Mac.

    How can I fix this to the o of Windows computers, I can print on the front of each page only, when I want to.

    Thank you

    Problem solved. I contacted HP Support by Chat online and we opted for the PS driver. It works correctly, a face print individual pages, Duplex prints two pages on one. So yes, the PCL6 driver is deficient.

  • Color LaserJet Pro 400 M451dn: appearing on printed documents HP LJ 400 points

    Print jobs are coming up with points (see image)

    I have already followed the steps in the Resolution of the problems of print quality

    I printed quality and cleaning of the pages, but after all these steps, I will always have this problem.

    I've also read several forum posts, but I feel that I did not fall on a good solution for this problem.

    Hard to tell from the image, but if all points are black, then the question will be the black toner cartridge.  If it is another question, then you'd have points in all colors.

  • Color LaserJet Pro 400 M451dn: Print vs wireless network

    I used my printer Wireless Ethernet connection between printer and Apple airport base station. I am moving and can use printer wireless without direct connection to the router? (Printer & new router in place will be not near each other for the direct cable connection is not convenient). Thank you!

    Hello @Cary2

    No way, it's a D M451dn stands for double-sided N to the network (wired network), only the M451dw will have the possibility of having the wireless

    The printer must have a wired network to the internet permanently connection

  • LaserJet Pro 400 MFP M425dn: Too many needed to print answers

    Yesterday, I received an alert of the systematic driver and downloaded the new driver.  Now I keep getting asked to choose my printer rather than simply print the document, when I click on print.  I want to rollback and undo this update.  How can I do?

    Go to devices and printers, and make sure that the printer you want to use is enabled by default.  Otherwise just right-click on the icon and scroll to default and the left click.

  • LaserJet Pro 200 M276nw: lost password cannot reset the printer

    Several others have had the same problem with enter the menu of the printer, but lost the password. Help someone please this person (me) happens stupidville and reset or what should I do to get my printer go?

    Hello and welcome to the community of HP @MsBz,

    I understand that you have forgotten the administrative password for your HP LaserJet Pro 200 M276nw MFP color. I'll do it is happy to help you.

    To remove the password, you will need to perform a special reset. I'll message you private instructions you need to do. Note that reset will clear your wireless settings, then you may need to reconnect to your network when you have finished resetting. (It's like the printer out of box at that point).
     
    Let me know if it helps. If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

    I hope this helps and have a nice day.

  • How do scan you a document from the printer to the computer using a c5180 all-in-one printer

    I try to scan a document to my HP Photosmart C5180 All In One Printer to my computer and like to know what are the steps to do

    Use the HP Solution Center to scan at the printer to the computer.

    HP this documentexplains how to scan with the HP Solution Center. It is very simple to install and use. Mine is configured as a network printer connected to my Linksys router wireless.

  • Problem with ink from the printer (maybe)

    Hello.

    Recently, I have a problem when printing it looks that the ink is spread over the page.

    It's as if she's not well dry.

    Is there an easy fix for this? The ink is old? It is possible because of something else? It's very cold outside, (-20 degrees celsius), but the printer is inside.
    I know the spray paint can be affected when it is that cold.

    (Also this incredible security gate, I had to pass through to try to get help was a pain in the *.) My shoe size is 42, btw.)

    Since it is a color printer, the colors also coat with just black. If only the black, then I would lean towards the black toner cartridge. If all the colors of defamation, then the fuser unit is probably the issue.

  • How can I remove the documents from the print queue?

    I can't get my printer to print as says the error message "cannot print due to a bad configuration of the printer".  I updated the drivers and reset the default printer...

    Once I opened the box of the print queue and tried to cancel all documents.  They would not go far!  Help, please.

    Hello

    This should help:

    View, pause, or cancel printing
    http://Windows.Microsoft.com/en-us/Windows7/view-pause-or-cancel-printing

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • trying to remove a document from the print queue

    Watch it of deletion, but will not erase.

    will not order process

    tried to stop the print spooler and then restart from a cmd prompt, but that has not worked.

    tried to delete the printer and then re install and that has not worked.

    turned printer off and then on, but it does not work.

    any help would be appreciated.

    Larry

    Windows 7 Home premium x 64 printer is on a network between two laptops worked this morning until what the printer ran out of ink and then after that nothing. is really the job queue on the laptop where the printer is physically connected?

    Joel S

    I had it deleted. There was a low ink messages. on the laptop where the printer is connected. the printer is a Dell 926.

    I used the cmd prompt as administrator. net stop spooler feeling then net start print spooler. This has allowed the queue on my wife's cell phone.

    and then did the same on my laptop and all clear and he then worked very well.

    Larry

Maybe you are looking for

  • Video clips will play is more - video format not supported

    Please help. I recently transferred an iPhone 4s to an iphone 5. All images and videos were transferred in the shop. I came now to actually play the video and I get this message. "unsupported video format" Please can anyone help. Here are videos of p

  • Connect a printer non-airprint for the Airport express

    Can I use an express train from the airport as a stand-alone wireless network to allow printing from an IOS device.  I want to connect an AirPrint not printer to the usb port on the Express with no ethernet cable is connected and so no internet and u

  • Ini file importing visa connection problems

    Hello In the Test Import Connections.vi joint, I try to import a resource (COM3) of a configuration file name. Import the keys in an initialized global functional. The functional global is read and the output is sent to a production cluster. However,

  • How to make text appear n disappear?

    When an event is true, a text appears on the front panel. If set to false, the text disappears. I know that we can use a property node for other things like the LED, but I have no idea how do for text. Pls help. p/s - say nothing pop ups TQ

  • "Configuring updates: stage 3 of 3-0% complete" start-up cirque. CANNOT BOOT TO THE DESKTOP

    Hello there,I desperately need help... I don't want to have to reload Vista Home Premium and all my software and get all authenticated (which total galley is the procedure!) once again. I installed the latest Java today from Java.com and everything s