LaserJet Pro 400 M451nw: Laserjet Pro 400 prints documents upside down

Similar Questions

• HP Officejet pro 8610: print documents HP Officejet pro 8610, fault with missing text or diagrams

  When printing, in this case the documents double faces, text on some pages is missing either at the top or bottom of the page, this also happens with diagrams. the fault is irregular on each document page multi on some copies, that the fault is on another page. Each page has a grid around the text/diagram. the document is for the teaching of science subjects.

  Hi @PEDDLAR and welcome to the Forums of HP!

  I see that you are experiencing printing problems.  I would like to help!

  I would recommend starting with a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend also to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• LaserJet 1018 - cannot print documents

  The printer has been connected to my router so it can be shared. He worked like that for a few months, but a few weeks ago, my wife said that she could not print word or pdf from his laptop (Win 7 32). She was able to print a test page so that she could use my computer to print (Win 7 64).

  Now I'm unable to print most of the things on my computer. I removed the router and hooked directly to my computer with no result.

  Now I'm able to print: a test page, a text document.

  I'm unable to print: Word document (2007), Excel file, pdf or Firefox.

  There is no special formatting in Word. I open Word and just type in random letters. I then click on print, printing box, I click 'ok' and the printer immediately spits out a blank page. If I click on the 'Properties' button I get an error message "Word cannot bring up the Properties dialog box because the printer returned an error."

  When I go to print in Excel I get an error immediately "current printer is unavailable. Select another printer. "If I select print preview mode, I get the same error. Once again no particular presentation, just text randomly.

  I tried a few pdf files. I click on print, printing box comes up but when I click on the button to print, nothing happens.

  I am trying to print from FF gives me an error "an unknown error has occurred while printing."

  I have re-downloaded the drivers of HP and reinstalled without change.

  I am at a loss at this time.

  You know that your connection is good because your device manager is refreshing.  This leaves us with a hardware problem on the printer.  It seems that your money would be better spent on a newer model, and then buying spare parts or sending it in for repairs.

  Something that comes out is the fact that you are not able to view the properties of the printer from Word.  This suggests corruption driver, you should be able to see even when the printer is offline.  I wonder if this is the real to display properties from your list of devices and printers too.  If Yes, then it may be a simple driver corruption problem that can always be fixed.

  Before you remove your printer, try to download a few different flavors of the UPD and test them.  You can choose to PCL5, PCL6 and PS, each has its own advantages and peculiarities.  Since you're on Win7x64 you will want to make sure you delete the driver and software and reinstalling.  Which will make sure you are reinstalling a table shave and remove any potential change to the next driver.

  Uninstall printer and remove driver (Win7 x 64):

  1. go in the beginning > Type devices and printers in the search > select from the results

  2. highlight your printer object and right click

  3. choose Remove the instrument

  4 put highlight something else in the list

  5. click on the button of properties of the print in the toolbar Server

  6. Select the tab drivers

  7 highlight the appropriate printer driver

  8. click on remove

  9. check the option remove driver and Driver Package when prompted

  10. click on OK

• HP LaserJet Pro P1102 printer: download the software

  Please, I want the driver for my printer "HP LaserJet Pro P1102 printer" because it does not work on my macpro os x10.10 and when I opened the tab pilot Web site recognize my version software and everything's fine, then I click on update, and nothing happens.

  I need the driver to install, or everything that was supposed to let my printer works on this laptop

  Thank you

  Hi @mohamedashraf,

  I see that you have any questions, get the drivers for the printer. I'd love to help you.

  You need to run Apple updates to install the drivers for the printer.

  Here is a document with the steps to set up the printer on Yosemite.

  Update the HP printers - installing a Mac printer driver by using the Apple software.

  You have the Laserjet P1102 or Laserjet P1102w?  How can I find my model number or product number?

  How is the printer connected? (USB / wireless)

  If you appreciate my efforts, please click on the button below the thumbs up.
  
  If there is anything else I can help you, let me know. Thank you.

• Color Laserjet pro m252dw: print off center

  My printer prints slightly biased (as too far to the right). I did the alignment test and tried to solve the problem by adjusting printing to several mm to the left, but it does not work. I am trying to print labels with graphics that contain a border of circle-because the page is printing off center seem no good labels. I print on sticker paper for labels and have used several different programs label to print from, and all have the same resulf of centred off the coast. Any suggestions? Help would be very appreciated!

  Hey @OldSoulA,

  Welcome to the Forums of HP Support!

  I understand that you have a problem of quality when printing labels from your computer Windows 8.1 to your HP Color LaserJet Pro M252dw. I would like to help you today with this problem of printing the label. Thank you for all the troubleshooting steps you tried before reaching out for support. At this point, I'm going to make sure that the labels that you are printing on conform to the specifications of your HP Laserjet Printer. Once you confirm that the labels you are using are supported, we will miss some tests in order to check if this central issue is caused by the type of paper or a problem of setting. Please follow the steps below.

  Step 1: Check paper:

  According to the specifications of your HP Laserjet Printer, the following labels are supported:

  

  • You can load up to 50 sheets of labels into the tray at 1 time. Do not exceed 50 sheets
  • Avoid mixing media into the tray with paper. Avoid labels on top of plain white paper in your loading tray
  • Avoid using labels that are separated from the backing sheet, wrinkled or damaged in any way
  • Do not use labels that have exposed the carrier sheet
  • Do power not more than once a sheet of labels into the printer
  • Avoid printing on both sides of the labels
  • Avoid printing on sheets which the labels have been removed
  • Make sure that you use the specific Laser as adhesive labels can damage internal components in your machine.

  Once you have confirmed that the paper of the label that you are using is meet the specifications of your printer can you please move to the next step.

  Step 2: Print Self Test:

  1. Load of the plain white paper in your paper tray
  2. On the front panel of your printer then drag your finger to the left and select configuration
  3. Under the menu Setup touch Service
  4. Tap the cleaning Page
  5. Print a cleaning Page now. This page should show the colored lines centered

  Check the alignment of the present report.

  • The colored lines appear centered?
  • Printing documents from your computer on plain white paper print centered?

  Please reply to this message with the result of your troubleshooting so far. Once I have the results of your troubleshooting with the answers to my questions above, I'll be more than happy to provide additional assistance for this problem. I look forward to hear from you!

• HP LaserJet Pro P1102w printer: download printer driver

  Difficulties to DL the updated drivers for the P1102w from the support page.   I find myself on this page; http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-Pro-P1102-Printer-series/4110394/model/4... but then unable to DL the driver.

  Tad late to the 8.1 group as I've been an exclusion on the xp so not on top of how it works at this point so don't know if it is a detriment or not, but it would be nice to have wireless work as it does the XP without problem.

  When 1 Dell started he created a printer icon that is visible in cntrl Panel but apparently without the drivers, there isn't a real connection apparently.

  Hello

  First of all, don't forget to unplug the USB from the printer.

  In Control Panel open devices and printers, click right no matter which HP icon and select remove device.

  Now try to install the following drivers, do not connect USB once the guest of installation to do:

  http://ftp.HP.com/pub/softlib/software12/COL32431/bi-80329-9/LJP1100_P1560_P1600_Full_Solution.exe

  Please let me know of any problems,

  Shlomi

• Unboxing and configure the HP LaserJet Pro P1102W printer

  Learn how to perform a unboxing conversion and configure the HP LaserJet Pro P1102W printer.

  For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

  This video was produced by HP.

  I hope you find this useful and informative video.

• Paper jam false error HP LaserJet Pro P1102w printer

  Hi my HP LaserJet Pro P1102w printer will not print envelopes and labels. I can print documents in the usual way. I can print on the plateau of encelope, but I can't use Word 2003 to print an address.  When I check "what is the impression he's a doc of the envelope and he says Envoy."  The 'Attention' on the printer flashes.  Troubleshooting says it's a problem with the printer.  I ran the auditor of problem of HP and the message I get, is that the problrm is a paper jam. There is no paper jam!

  I would be grateful for any help

  Thank you

  Ron Barker

  Hi @RonBarker ,

  I see that you have problems printing of envelopes. I will definitely do my best to help you.

  The Word software, to change the auto power.

  When the light is flashing on the printer, if you open and close the cover, the printer should resume printing, it acts like a resume button. Given that this model does not have the button. But I've provided the steps to make the changes via the Word software.

  In Word, click on tools, select letters and direct mail/envelopes and labels, box of the envelope will be opened in the envelope tab, enter your address, click Options, click the Printing Options tab, you will need to change the autopower supply, it is probably set to manual. Check the food method to ensure that it is correctly set.

  

  If you need help, let me know.

  Have a great day!
  Thank you.

• Mac Book Pro is printing 50 copies

  Hello

  My MacBook Pro is printing 50 copies for each print on kyocera 5551ci. Is there a solution for this problem?

  Your post is rather incomplete, we have no idea of how the device is connected, the version of Mac OS X installed, what you have tried troubleshooting, etc... To be more specific, right now all I can suggest is to reset the printing system and then reconnect the printer and then repeat the test.

• Problem with the HP Officejet Pro 8500 printer: clean the print heads each time it is turned on

  Hello everyone,

  the printer HP all-in-one Officejet Pro 8500 (A909a - product n. CB022A) clean the print heads whenever I turn it on. This problem affects any HP Officejet Pro 8500 printer, it is not a problem only of this one I bought. It is a boring bug and annoying because each power clean print heads on involves two bad disadvantages:

  1. waste of ink (each heads cleaning process consumes little ink);
  2. too much time (2-3 minutes) to prepare the printer after plugging.

  I upgraded my printer with the latest firmware available on the HP site (firmware ver. DLM1FN1006BR), but the bug is still present.

  At this point, I ask:

  1. There is a way (or procedure) to disable automatic cleaning this useless to all power on?
  2. Can we communicate with the HP engineers or tell me how to contact directly one of them to indicate the bug and request a new firmware updated?

  Please don't tell me to leave the printer on all the time or that the printheads to each cleaning power is normal behavior! Where then are power and ink savings claimed for this printer model?

  I hope that a solution to this problem. Thanks in advance to everyone will help me!

  Maintenance when the printer is turned on is normal and is required to keep the printheads in good health (not blocked). See here for more information.

  With respect to energy savings, the printer automatically goes to low power mode when the don't feel not for awhile.  It is not necessary turn the unit on to save energy.

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• OfficeJet Pro 8610: print legal size document

  Is it possible to print a document on legal size paper on the Officejet Pro 8610 printer?  If so, how can I do or where can I find instructions?  I need to print an excel document and may take up to print, but do not know how to load the paper.  The tray is too small.

  @jaztenor

  Theuser's Guide (Chapter 2, Page 24) explains how to extend the tray for legal size paper.

  NOTE: To load legal-size paper, press the blue latch located bottom left of the status bar of entry and
  Deploy the status bar.

  

  Printing preferences to specify the printer paper that you use.

  Paper size and Media Type:

  Control Panel > display icon > devices and printers > click on your printer >

  Printing preferences > paper/quality tab

  Reference, suggestions and examples:

  Printing options

  

  According to the program / browser you use present it the print job, you can reach the printing preferences in preview before printing.

  Example - Firefox:

  Browser > file > (click) Print > properties (open printing preferences)
  

  Reference, suggestions and examples:

  Manage the print with preview output before printing

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• I can not long print documents from my iMac/Snow Leopard / HP Laserjet 2300dtn combo. because everytime I try, a message pops up: ERROR: A Fax number is not provided. There is no mention of "fax" in the "print and fax ' file in Prefs system.»

  I use an iMac 2011 under Snow Leopard, but it can no longer print documents via my hp laserjet 2300dtn printer. Reason: whenever I try, a message appears through the PRINT icon in the Dock, read: "ERROR: has not received a Fax number. There is no fax option in the Print & Fax window in the System Prefs so I have no idea about the origin of the error message, but suspect there is corruption in the printing preferences.  So I went username/library/Preferences/com.apple.print.PrintingPrefs plist... and a file is moved to the trash. Unfortunately, the problem is not resolved. I am far away computer and would love advice for this situation.

  Try to reset the printing system.

  Reset the printing system

• OfficeJet Pro 8600: Printer offline and HP Support for Windows 10 don't come upward

  I'm trying to scan pictures to my computer.  Have upgraded to windows 10. My printer is connected wifi.  I bring the printer in Control Panel, set up my printer and it says printer is offline.  Indications are no good they do not appear to be implemented for users windows 10. When I try to go to the hp support for windows 10, I have just a white screen.  I am very frustrated.  I can print to the printer, but he won't let me not scan to the computer, and that's what I need.

  Hi @Procats,

  Welcome to the HP Forums!

  I understand that you cannot scan on Windows 10, with your HP Officejet Pro 8600 printer. I'm happy to discuss this issue scan for you!

  Please, try the following steps:

  Check the connection of the printer on the network and troubleshoot any problems with the printer, router, installation or connection.

• Color Laserjet 2605dn: duplex printing with UPD

  The universal print driver that runs on Windows 10 (64-bit) does not recognize on my Color Laserjet 2605dn duplex printing function. drivers passed under older versions of Windows enabled this setting on the Advanced tab.

  Is there a way to enable or UPD grants only limited functionality and does not support the duplex feature?

  Hello

  in devices and printers click on the right button the printer UPD icon and select printer properties.

  In the device settings tab, verify that the accessory set duplex as installed and check for the difference.

  Please let me know if this can help,

  Shlomi