LaserJet Pro black spots 200 printing line

Hello

I just unpacked it my new printer, and each print has a row of points on one side. I have run a few cleaning cycles and does everything else in the document:

http://support.HP.com/us-en/document/c03416215

Looks like that the toner cartridge has a spot on cant I sort the roller manually so I can see the place? Where can I get a new HP cartridge?

Thank you!

Andy

Hi Vidtender,

I just sent you a private message. If you are unsure how to check your messages from the forum, this Post instructions of a..

Thank you.

Tags: HP Printers

Similar Questions

  • HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

    PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

    OS: Windows 7

    OWNER: More than 2 years without any problem

    LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

    QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

    Help!

    I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

    -Spencer

  • LaserJet Pro M251nw color 200: Wifi turned off but still broadcasting

    Hello

    First, forgive my English.

    I have a HP LaserJet Pro 200 M251nw color, it has a capacity of wifi. Because the printer is connected with a cable ethernet to my router, I don't think that he had to use the wifi built into the printer.

    Thing is, when if I disable the wifi of the printer, and even if I disable "wifi direct to print", I can still see the SSID of the printer on my devices House (200 HP-Print-a6-LaserJet color).

    I looked on the forum and I tried the 'factory reset' turn, unplug the printer and taken, wait 15 seconds... etc. It did not work. I also installed the latest firmware.

    Any help would be greatly appreciated! :-)

    Hello revlib,

    Welcome to the Forums of HP Support!

    Turn off the wireless directly on Color LaserJet Pro 200 M251nw should have disabled the SSID broadcast. Since the display before disabling has not resolved, try the built-in webserver (EWS).

    To access the built-in Web server, you will need to enter the IP address for the M251nw in the address bar of your web browser. The IP address may be collected by touching the Setup program () > reports > Network Summary.

    Once in the SAP, click on network > wireless direct configuration > select and apply.

    Let me know if this has help

  • LaserJet Pro M251nw color 200: LaserJet Pro 200 color M251nw memory is low...

    I see that many others have had this same problem. Printer just 1 week out of the box. I tried to print as well via ethernet and wireless - same issue - something more than on a page of text quickly results in the message "memory is low job canceled". Both the firmware and the driver are updated. I've done several resets of power, and the printer is connected directly to a wall outlet. IPv6 is disabled, print Archive is enabled. I tried to reset the printing system on my iMac, Yosemite 10.10.2 running. Extremely frustrating!

    So, after a long conversation with technical support... it might be a Mac thing. I ended up printing of compensation system (delete all printers, then ctrl - click in the Printers box now empty) and reinstalling. Critical step here is to select the LaserJet Pro 200 by name, not the option 'Air Print. After reinstalling printing works great... until it doesn't. I had to repeat the process once already. A pain, but it works. Incidentally, I now use the wireless printer instead of via ethernet. Not sure if this is important, but it was the other suggestion made through technical support.

  • LaserJet Pro M127FW: LaserJet Pro M127FW stuck to print Fax Page 1

    I encounter an error on the MFP HP LaserJet Pro 127FW where it is blocked to message "Printing Fax Page 1". Cannot do anything else on the printer. I tried feeding this bike but still does not work. It has been like that for a few days now.

    In my view, there are some instructions on other threads to do a hard reset. Help, please.

    Thank you.

    As this does not work, I'll send you a private message describing how to perform a factory reset. You should see a private message to your forum Inbox shortly.

    Please let me know if this clears the fax message.

  • LaserJet Pro M127fn MFP: Stuck "print fax page 1.

    I had to receive two pages of fax. After that the first page has come through it is stuck "print fax page 1. The second page is never good. I can't print anything. I already disconnected my printer and plugged in. When the rear connection, it uses the same throughout first fax page and gets stuck again. Happen from nowhere at least once a week for the past few weeks.

    Hi @cvsc ,

    I see that you are having problems with the printer stuck in an "Print fax page 1" error message when you restart the printer, it keeps printing the same fax. I would really like to be able to help solve this problem.

    I would like to do a hard reset to see if that will solve the problem. It's probably a little different then what you have already tried.

    Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
    Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
    This ensures that the printer is full on and can help this situation.

    I would say for updating the firmware of the printer. Here is the link just choose your operating system and select the firmware download. HP LaserJet Pro MFP M127/M128 series Firmware update.

    If you're still having problems, try to reset the printer. I'll send you another step to try in a private message to try.
    In the forum next to your handle name simply click on the envelope to see.

    If you need help, let me know.

    Good day!
    Thank you.

  • Color LaserJet Pro CM1415fn-HP Multifunction printer

    Hi all

    We have range of printers multifunction color HP LaserJet Pro CM1415fn when I try to scan the scaning page show but as soon as the scan complite he past he displays no result 0 pages 0.

    http://S30.postimg.org/e3sakkg81/Scan1.jpg

    http://S28.postimg.org/7vvv449dp/scan2.jpg

    Concerning

    Hello

    Welcome to the Forums of HP Support!

    I see that there are some odd scanning issues going on with the CM1415fn, watch the preview and then his party. It seems that the computer is a Windows computer, is this correct? If so, what version of Windows?

    Try running the printing and scanning Dr, it will look like check the drivers, software, etc.. I would like to know what the results are.

    See you soon,.

  • Color LaserJet Pro CM1415fn MFP - professional printer with just a feeder?

    I'm confused. He is a professional office color printer - which means that a number of print media will be used to print on a daily basis.

    And after buying this printer at Amazon, I discovered that there not a manual feed tray and one paper tray.

    I have print of legal documents - copy desk in our records, on cheap paper, a paper of good quality to the client and an envelope.

    So I have to print a simple letter to remove and replace the Board THREE TIMES. This is not good.

    My simple Canon printer internal, or any other printer I've seen ALL have manual power option.

    QUESTION: could you please let me know if there is an attachment to this printer that would allow me to print manually, or should I send the printer to the shop?

    Hi GarryStotel,

    No, this printer does not have an add on the extra add envelope feeder on the plates as accessories. Looks like you need a little higher level printer as one of the following units (color HP LaserJet Pro 300 M375nw MFP color HP LaserJet Pro 400 M451dn printer) I included a link to your review these printers below.

    http://shopping.HP.com/en_US/Home-Office/-/products/printers/printers?SearchParameter=%26%40QueryTerm%3D * % 26brandprinters_dte2% 3DLaserJet % 26categoryusageprinters_dte2% 3DBusiness % 26CategoryUUIDLevelX %3 D 6. YQxXjbkYMAAAE0nvZcZzO9%26TieredPricing3%3D%255B400.0%2BTO%2B599.99%255D%26%40Sort.TieredPricing%3D0&PageSize=15

    LaserJet CM1415fn:

    Overview

    • Print, copy, scan - in color - and fax, with the first HP LaserJet printing from the Web and mobile devices. To connect to a wired or wireless network. [4] using a screen color touchscreen to print sharp documents. Save energy and reduce your impact.

    Ideal for the

    • Companies that are looking for Wi - Fi and networking in a color multifunction capable of printing from the Web via a touch screen and applications and mobile devices.

    Features

    Put easy, touch screen, print on your desktop.

    • Use business apps and the 3.5-inch (8,89 cm) color touch to access and print the information on the Web. [7]
    • Stay productive on the move. With HP ePrint, now you can print from virtually anywhere. [6]
    • Now with AirPrint™. Simply print wireless from your iPad®, iPhone®, iPod Touch®. [9]
    • Spend more time on the business and less time on the program of installation and maintenance.
    • Easily copy on both sides of an ID card to a front document.
  • HP LaserJet Pro M252dw: Won't print - HP LaserJet Pro M252dw drawer of toner cartridge does not retract

    Toner HP LaserJet Pro M252dw cartridge drawer does not retract.  The small blue drawer pull is out there is no way to open the drawer.  This flaw was not discovered until I needed toner, 5 months later - this printer was bought in January 2016 and worked well.  Now, it's just a big box of heavy using the space in my office.

    I can't be the only person with this problem printer!

    Thank you

    JQ

    Hello @jakehuesand welcome to the Forums of HP! Although I would like to help you with your M252dw, I'm not sure that I can do on one piece broken other than suggest that you call us. HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you want to: check your warranty status.

    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number

    File number and phone number are displayed.

    Feel free to post again if there is anything else I can help you with that.

    If my answer meets your needs, please click Accept button Solution below to report your post as solved. Thank you.

  • Color Laserjet Pro M452nw: Not accepted print job

    Just installed a new HP Color Laserjet Pro M452nw today, it connects using wireless to my network.  I followed the installation instructions and everything seemed fine and I was able to print the test sheet.  However, when I try to print a document from my MacBook, I get an error message in the print queue, declaring: "Print job not accepted."  I saw the support log, find others with the same question, but maybe on the models of different printers.  In any case, I have followed the instructions for the patch, installed a new printer driver Apple, reinstalled the printer, reset the printing system and I keep having the same problem.  Furthermore, he sometimes interrupts the print queue after encountering the error.  Do not know what to do...

    Hello @sanovogo

    You can try the following changes

    Go to the network set up on the printer and network services, disable ipv6 (disable)

    Go to the link (always within the network set up the menu) speed and the complete change to 100TX

    Sent a new print job to the unit

    If it fails while you see the error on the PC to the printer and try to deal with a report of configuration in the menu reports

    Get the IP address on the right side on the 1st page under settings of the printer

    Enter the IP address in the URL of web browsers, this online application should open indicating the status of the printer in this way can isolate you the connectivity to the printer

    If by this desire to point showing the error on the PC, you can print the configuration report and Web site opening, I'll suggest another pilot, because it must be the one having the problem I could give other recommendations but will like to know what happened first

  • LaserJet Pro 400: Watermark not printing on Laserjet Pro 400 on Windows 8

    On the computer of Windows 8, watermark does not print on Laserjet Pro 400 connected by USB. Please note: the function watermark works on other printers not HP, as our networked Ricoh copiers. The printer prints a watermark on a Windows 7 computer. Using the driver package LJM351_M451_Series-12200-drv_installer.

    Very hard to advise without additional evidence (such as samples).

    With my Windows 8.1 Pro 64-bit system, I can print watermarks on my LaserJet Pro MFP color 400 M475dn (equivalent of MFP M451) device.

    Attached is a zip container file:

    • Small text in the abcde.txt file that contains the text "abcde".
    • Print file abcde.prn contains the print job generated by opening the text file in Notepad and by printing the document (using the driver of HP LJ300-400 color MFP M375-M475 PCL 6 (61.120.5.12262) UPD version 5.3.0.12262), by specifying the "SAMPLE" watermark with the default settings; exit 'captured' by using the option "print to a file.
    • Text file abcde.prn_analysis.txt contains an analysis of the contents of the print queue.
    • PDF file abcde_scan.pdf shows a scan of the printed output by sending the contents of the direct .prn file to the printer port.

    Try to send the contents of the .prn file direct to your printer port; for USB connect, you must use something like:

    copy  /b  abcde.prn  \\computer-name\share
    

    in a Windows command prompt session, where:

    the computer name is the name of the workstation;

    share is a share of the Windows printer instance name.

    The resultant prints show the watermark of the SAMPLE ?

    If so, then the printer handles the commands to the printer (in this case using PCL XL) OK.

    Can generate something similar to your driver for analysis?

    [You will probably need help moderating to attach files in this forum].

  • HP Laserjet Pro CM1415 while a printer/Scanner

    I just 'restored' all the info on my new iMac to my MacBook Pro. I can print but cannot scan using HPScan 3. Two computers use OS 10.9.2. How can I get my Scan to work? I need new drivers? If Yes, where can I find them?

    Thank you

    Hi pocoguy,

    Welcome to the HP Forums.

    I see that you are not able to scan with the Laserjet CM1415 since the restoration of all the info on your new iMac to your MacBook Pro. I will do my best to help you with this problem.

    Uninstall all the old software. Printing software uninstalled.

    Then download and install the new software of the printer.

    HP LaserJet Pro CM1415fn color MFP series Full Software Solution - OS X 10.9 Mavericks.

    This should help you back in business again.

    I have provided a document for how Scan: v10.9 OS Xor with the HP software.

    If there is anything else I can help you with just let me know.

    Have a great day.
    Thank you.

  • LaserJet Pro 400 color m451dw: printer Laserjet Pro 400 color m451dw for window 10 drivers

    I can't find the drivers for a m451dw Color Laserjet Pro 400 running on Windows 10.  The only available operating systems are Mac.  Is there another place to look for drivers window other than the drivers regualer section 10?

    10 64-bit Windows

    http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4192

    10 32-bit Windows

    http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4191

    ------------------------------------------------------------------
    Say 'Thank you' by clicking the Bravo (Thumbs up) button in the post helped you.
    Please indicate the position that solved your problem as "acceptable Solution".

  • HP LaserJet Pro 100 color MFP: print warning of low ink, cartridge black, but is still perfect

    Hello people,

    On the screen of the printer itself and on the computer, I received a warning of low ink in the black cartridge for many months. I have a black cartridge, but I am still able to print with no noticeable decline in quality.

    Should she continue to print with the warning of low ink level can damage the printer or should I just wear until the print quality deteriorates?

    Thank you in advance.

    --

    Tim

    Here, the document says: "warnings level of Toner and indicators to provide estimates for planning only.» When an indicator shows low toner levels, consider having a cartridge replacement available to avoid possible printing delays. Print quality deteriorates as the print to run out of ink cartridges. »

    You can continue printing until the print quality shows signs of deterioration before you need to change the cartrdige.  Do not damage the printer.

  • Printers Multifunction LaserJet pro CM1415fnw does not print in color.

    I have a hp pro cm1415fnw mfp laser jet in my office who does not want to print in color. I have a windows xp. Whenever I try to print in color out of windows from microsoft or the internet the picture comes out all black and not in color. When I print a diagnostics page it prints in color, however. I need help.

    Hi RicherdAC24,

    Follow the steps below to uninstall and reinstall the printer.

    1. open Control Panel

    2. click on uninstall a program

    3 uninstall the Laserjet CM1415 in the list

    4 restart your computer

    5. download and install the latest version of Adobe flash player

    6 download the drivers and full software functionality, and then reinstall the printer.

Maybe you are looking for

  • You can bind a wired headset to the Apple Watch through the iphone?

    Hi, I'm trying to understand if it is possible to connect a wired headset to iphone and then have them work with the watch in the same way that wireless bluetooth headset would work. I watched several bluetooth headsets and none have really intereste

  • S5-1200z cd door

    Trying to figure out where the black wire (2 pins) on the cover of the cd case connects to my motherboard. The wire allows you to open the door of cd case by pressing a button... I have a HP Slimeline s5-1200z with an AAHD2-HY(Holly2) motherboard Onl

  • Impossible to reopen the emails that have been previously opened

    some of the emails that I had previously opened cannot be reopened.message rises (the message cannot be found) it does not reach all the emails.  It is not a problem of antivirus I already checked on that.  I can read an e-mail a day, go back and che

  • Photo as photo screensaver and e-mailing

    Photo Gallery uses Outlook to send pictures I think but I use Yahoo for email.  Should I copy photo somewhere? How can I take a photo in the library and use it to a screensaver?

  • BlackBerry smartphones turning off roaming data for international travel

    My wife is planning a trip to Italy next week and I'll try to find how to disable roaming on my trip, but still allow access WiFi where I can get it? Can be much smarter than me with this stuff help?