LaserJet Pro M125nw MFP - scan to application all-in-One remote control does not work

Hi gurus,

Basically, I bought that Super-imprimante and I now trying to scan to my mobile devices.

I have an iPad 2 iOS 7 on 2 Android devices (small tablet and phone) both running Kitkat 4.4.2

I try to send a scan of all these devices and retrieve the output in my mobile, in fact it is quite described here and for exactly my printer model:

Unfortunately, what is happening:

-From my iPad, the app AiO says that my printer is not compatible with the application!

-From my 2 Android devices, the application of all-in-one remote works perfectly, except the scan function as nothing happens (well, when pressing the button 'Preview' or 'Analysis' in the Scan section, I see a button 'Cancel' for 0.1 second and I'm back to this section of the analysis)

Could someone help please?

The printer is returned to the seller.

According to French support, the product page is fake, so I was waisting my time.

Tags: HP Printers

Similar Questions

  • I have a hp photosmart c7250 all-in-one wireless radio does not work

    I have a HP Photosmart C7250 all-in-one and the Wireless does not work.  When I try to go through the wireless configuration wizard, the test report shows the following - 'the wireless radio does not work.  Contact HP support.  Can you help me?

    We will reset the printer.  Turn the power off, hold it # and 6 keys all on again.  Go to Configuration > network > wireless network Test later to see if it worked.

  • LaserJet Pro M125nw MFP: scan for laptop

    I like my new HP Laserjet pro, but can't figure out how to scan to my laptop for e-mail, etc..  I know that I am probably not something located?  some would like to help!


    Welcome @BJ888,

  • all-in-one touchscreen printer does not work

    I have printer e-all-in-one-hp officejet pro 8600 - n911

    The touchscreen doesn't work or light up. The side panel will sometimes show a red x or a?.

    Bought in February. Tried all the troubleshooting online ideas

    I'll see if your able to do a firmware to the printer, you can access that if his etherneted to the router in the SAP (built-in Web server) or wireless IF that is not the problem I call 800-474-6836 and talk to tech support of HP to get the product being replaced.

    follow these steps to access the SAP of the printer

    If the printer is installed on a computer, open the Solution Center Lite software, click the printer Preferences and click on "homepage (EWS) printer" once loads pages click on the tab "Web Services" and click on "Product updates" (that is to the left) at this time, it will install the updates

    IF its USB connected, then you will need to find a bit more on your printer. The 8600 has 3 versions click on the version you have, and it will take you directly to the firmware for this model page.




    IF those who do not work, call us at the 800-474-6836

  • HP PSC 1410 all in one printer scanner does not work

    My printer, HP PSC 1410 all-in-one works fine as a printer, a scanner and a copier until I had a virus and had to reformat.  I have the original HP for the printer drive, downloaded the software undated and have loaded, deleted and reloaded the software 20 times.  The printer and copier works well.  Microsoft appears saying that scanner drivers are not certified, etc. and I can't scan to work.  I had put in hundreds of hours trying to get this to work.  I am 71 years old and I already have the computer work for my company 18 years ago.  My inability to solve this problem that bothers me more than anything else.  I need some young soul to help me that whip.  I don't buy a new computer or upgrade to Windows 7 until I fix this.  It has become a challenge, but I need help.  Kenny:

    Hi KennethPlaisance,
    Method 1: HP has created an update to update the driver to scan and fix the problem. Check if it helps you to fix the problem.
    For more information, see:
    Method 2: Use the diagnostic utility scan to fix the problem automatically.
    Visit this link to download the utility:
  • Photosmart C4280 All In One: USB Port does not work

    When I try to scan, I get a message saying that the USB port is not installed. It is installed, but I bought a new USB port and still get the same message.

    Hi @MrsQ3,

    Thanks for getting back to me with this information.

    Have you already tried to install the software and drivers from printer? If you do not try to download the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and drivers available for Windows 10.

    If you have already installed the printer software, try downloading and does not perform the HP print and Scan Doctor. This tool can diagnose and solve many problems of printing software and printer.

    Please let me know how it goes.

    Thank you.

  • HP laserjet pro m125nw mfp: hp laserjet pro m125nw mfp scanning

    Can't scan multiple pages at a time. No matter if I 'create a separate file for each scanned page' checked or not.

    The pre-scan shows 1/1 and I have buttons for the 'back', 'Save' or 'done '.

    How can I add one or more pages to my PDF?

    Hi @des5576 ,

    I want to help you be able to scan more then one page at a time.

    After selecting the Scan button, you should have an option in the lower left corner of the window to select Add/remove pages.

    Here is a picture.

    You will want to check the 'create a separate file for each scanned page' in the Advanced section to scan a multi-page document in a file.

    Let me know if your screen is different.

    How is the printer connected? (USB, Ethernet, WiFi)

    Good day!
    Thank you.

  • My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

    My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

    Original title: control sign Vaio


    According to my research, the actions must be enabled for individual applications. Check out the following link and activate the gesture for Power Point and Cyberlink PDVD.

    For more help, you can contact Sony support.

    Hope that the information provided is useful. Do not respond if you need more help.

  • my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

    my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    Once iTunes to work properly, you should be able to fix your device.


  • The administrator password for all computers on the network does not work for ONE of the computers on the network

    original title: the computers of network/administrator password

    The administrator password for all computers on the network does not work for ONE of the computers on the network. I need to log on as an administrator to install software, but the password does not work. It works on other computers, but not this one. How is this possible and how can it be solved?

    Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  • I would like to cancel a subscription to Premiere Pro program. I can't support Adobe in Russia, it does not work. Please, help me to solve this problem

    I would like to cancel a subscription to Premiere Pro program. I can't support Adobe in Russia, it does not work. Please, help me to solve this problem


    Please refer to l



    Contact our support here Contact Customer Care

    You can follow the screenshot as below

    I hope this helps!

  • MFP HP LaserJet Pro m125nw: MFP HP LaserJet Pro m125nw Scan software for Windows XP


    Can I ask you if there is a download location for the scan for the MFP HP LaserJet Pro m125nw HP software as the unit didn't come with a CD.

    On the product page there is a driver listed for Windows XP, but the software is not available for download.

    Product page:

    The product manual:

    Thank you very much.

    Best regards


    Hi Ryan,

    Download and install the full software features below, which include the software of HP scanning as part of the package:

    Kind regards


  • All HP6210 in a Scanner does not work in Snow Lepoard.

    I upgraded my OS to Snow Leopard.

    I deleted all the old applications and drivers and redownloaded new drivers for the HP6210 all in one printer.  The printer works but I cannot scan any document.

    I tried using Image Capture too - but still does not work.

    When I scan of the device (in pdf format) Manager, I hear the scanner works, but and the popup error message "sorry, an unknown error has occurred."

    I went into System Preferences to find the scanner in the Print & Fax, HP6210 all-in One - on the scanning tab - it says no scanner found.

    Help, please.

    You have downloaded the software wrong (according to the link you posted).  This software is under 10.5 and will not work in 10.6.

    Uninstall and download this.

  • Satellite Pro P100: remote control does not not-> error ' cannot be read handle. ".


    My Satellite Pro P100 began to show the error "Failed to read handle." at startup. I found a related post and removed from the area of registry Toshibarc.exe control startup programs. This does not prevent the pop-up dialog box, but now my remote does not work.

    Does anyone know if toshibarc.exe must run for the remote control work? And if so, how do I fix the error in the program (rather than simply removing from the register). Could this be a hardware problem?

    If I try to manually run the C:\WINDOWS\SMSC\CIRHID\V1_0_0000_0\toshibarc.exe, I get the same popup "Impossible to get read handle.".

    Thanks for any help or ideas

    After a long period of investigation in the internet and visit many Web sites, I discovered that the ToshibaRC.exe file belongs to the Remote Application from Toshiba. It seems that the file is required to use the remote on the laptop...
    But I can't give you a reason why it causes an error.

    I found this similar thread in the forum

  • All-in-one HP 6525 does not install correctly

    Hello and hope you can help me. I tried looking for the answer to my problem in the previous posts of the forum but could not find anything useful for me.

    I bought the printer about a month ago, I installed it without any problem (wireless), but at some point, I couldn't use the scan function. I had to use the USB connection to make. I thought about uninstalling resettlement of amd, but several problems have emerged. Now, I can not install all the features, scan function does not work wireless, not to mention eprint. I have removed all HP registry keys before reinstalling the software still does not work. When I get to the control network environment, the program blocks. The printer is connected to the wireless network, it shows even documents.

    Please, can you help me?

    Hi @ionelaiordan

    I understand that you have already uninstall it and tried to install it, but the following steps may resolve the software questions have expressed you;

    1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%

    2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted

    3. The new software - uninstall the printer software Instructions

    4. Once the uninstall is complete, reboot the computer

    5. Follow these steps to reset the registry settings and options for Windows Installer.

      • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run

      • In the Open box, type msiexec /Unregister, and then click OK.

      • Hold down the key of the Windows Logo on the keyboard and the 'R' to open the dialog box run

      • In the Open box, type msiexec/regserver, and then click OK

         * Note: there is a space between the c and the /.


        If you do not at this stage, use this link to perform another way. Restart Windows install

    6. Run the system Accessories\ tool disk cleanup <> How to delete files using disk cleanup

    7. Download and install the latest version of Adobe flash player

    8. Perform a clean boot > How to perform a boot in Windows

    9. Download the following SP40669 file download - if this download and or install, please proceed to the next step.

    10. Disable real-time scanning and the firewalls; The image below is an example of McAfee, if you have another antivirus program and need help to disable the analysis in real-time and firewall let me know.

      Source of the image

    11. Download and run the HP printer install wizard for Windows

    The HP printer for window installation wizard was created to help Windows 7, Windows 8, and users Windows 8.1 download and install the latest and most appropriate HP software solution for their HP printer.

    Please let me know the results of these efforts.

Maybe you are looking for

  • a bookmark that I used for years any opens

    I used a bookmark for a single site for many years, no other bookmarks made, as I can't open it to all.When you try to open it I get a blank page and up beside the safari or firefox icon apperas forum words spark 1 x 1 pixel. in the tab below is the

  • Why am I not able to upgrade to 10.11.2 or 10.11.3

    I use the software update in the App Store and it says I have no updates available. So I downloaded the update file, and I get these messages. I get an error message when you try to upgrade to 10.11.2 or 10.11.3. OS X El Capitan update cannot be inst

  • Express Card USB + 1394 Combo Express card problem device.

    I have a Sony Vaio laptop and try installing this card in the Express slot to join sony Video 8 digital recorder to my laptop. Device will not load driver correctly. There was no disc or another driver with the device. The foregoing describes the pro

  • drivers for Acer 5750Z

    As I installed Windows 10 I get WiFi dropouts, several times a day. I use the convenience store, he finds the problem and fix it. The problem is with the network card. This can happen several times a day or session. I read that it could be the driver

  • Acer lan E5-511-P8C8 port number

    past slot windows 8 to 7 OSS and lan port does not work drivers don't work for Lan port any ideas >