LaserJet Pro M127fn MFP: Stuck on "Print Fax Front Page.

Similar Questions

• LaserJet Pro M127fn MFP: Stuck "print fax page 1.

  I had to receive two pages of fax. After that the first page has come through it is stuck "print fax page 1. The second page is never good. I can't print anything. I already disconnected my printer and plugged in. When the rear connection, it uses the same throughout first fax page and gets stuck again. Happen from nowhere at least once a week for the past few weeks.

  Hi @cvsc ,

  I see that you are having problems with the printer stuck in an "Print fax page 1" error message when you restart the printer, it keeps printing the same fax. I would really like to be able to help solve this problem.

  I would like to do a hard reset to see if that will solve the problem. It's probably a little different then what you have already tried.

  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I would say for updating the firmware of the printer. Here is the link just choose your operating system and select the firmware download. HP LaserJet Pro MFP M127/M128 series Firmware update.

  If you're still having problems, try to reset the printer. I'll send you another step to try in a private message to try.
  In the forum next to your handle name simply click on the envelope to see.

  If you need help, let me know.

  Good day!
  Thank you.

• HP LaserJet Pro M127fn MFP

  Has the HP LaserJet Pro MFP M127fn for about a week for business, now will not print fax rec'd, shows message 'Memory Supply warning', how do I fix this, please help, thank you.

  Hello, supplies message usually indicates a toner low capacity.  The following information shows how to adjust the low setting and please keep in mind that once the cartridge is really a reduction in qualitty impression will be visible on all printed pages.  The toner cartridge (s) will be replaced.  On Control Panel press the key icon (installation) - printers cartridge of SUST select settings-select power settings-black - very low setting - continue.  This replaces the weak message and allow printing.  The long-term solution is to replace the cartridge.

• HP LaserJet Pro M127fn MFP: Automatic document feeder does not detect documents loaded on it

  Hello

  I use all of this in one previous machine a few months. Since the last two weeks than its automatic document feeder is not detect documents loaded on it, while it is perfectly flat scanner scanning and printing as well. This machine is connected via a usb cable. I tried all the troubleshooting options available including resetting the printer, cleaning ADF etc etc sensors I also tried the update the bios of the printer, but it does not work for me and feeder is constantly unable to detect documents loaded on it. I searched the whole forum but did not find any message an answer fast and good, therefore, will be highly appreciated in this regard. Thank you

  Hey @Mohsan_IT,

  Welcome to the Forums of HP Support!

  I would like to help you today to address the issue of automatic documents feeder sensor you encounter on your HP LaserJet Pro MFP M127fn. Please include all the troubleshooting steps that you received before you reach out for support. Right now, you have completed all the troubleshooting steps supported in your efforts to solve this problem. If you want to confirm that everything was done correctly, please see the following two positions:

  • Can not copy or scan of FDA (autofeed) on LaserJet 127fn MFP
  • ADF works does not in all new Pro LaserJet MFP M127-M128

  All steps in the discussions that I provided above must be made without success, then the last step would be to perform the programming reset NVRAM on your printer. Now I will send you a private Message with instructions on how to reset the NVRAM. Please check your private Messages for instructions.

  Good luck!

• LASERJET PRO M127FN MFP: MFP M127 FN

  Hello!
  24 hours ago becomes owner of a M127FN MFP of LASERJET PRO and when I plugged it to the power cord the two layers display lights not on
  and I can't see the messages without outdoor light
  Can someone tel me why lighting of the screen does not work and what I can do?

  Thank you in advance.

  I wish to inform you that, finally after understanding of my issue the HP company gave me a solution, by replacing my MFP M127fn device with a reconditioned nine M225dw MFP unit.

  I want to thank you for the transfer of my question to the attention of a team of HP appropriate and I would like to thank HP for the satisfactory solution which gave me.

• LaserJet Pro M426fdw MFP: Automatic duplex printing works in 2016 in Word but not in 1 c Enterprise 8

  Automatic duplex printing works in Word 2016 but no 1 c company. When I choose "Print on both sides" in Word 2016 it works as it should. But in the 1 c company it prints 2 pages instead of 1. Can someone explain why?

  The problem is with 1 c Enterprise 8. In version 8.3, it is possible to select two-sided printing in file-> Page Setup. This program doesn't respect changes to the settings of the printer in the print dialog box. You must change the configuration of the default printer in the control panel.

• LaserJet Pro M127fn MFP: HP Laserjet MFP127fn print problems

  Hi all would appreciate any help on this problem of pinting. This MFP M127fn uses the HP CF283A cartridge.  Electrical level shows approximately 10% consumption. The problem may be best described by looking at a picture attached, which shows a Word document with two white vertical columns in the Middle - the lines that make up the table should continue in these columns. I removed the cartridge and given him a jerk, but that has not solved the problem. More tips or advice on the resolution of this problem would be welcome. Thank you very much.

  

  Hi Portnoy58,

  Thank you for your answer!

  If the configuration report does the same, then the problem is with the toner of ink, or the printer itself. Please Contact HP phone support for assistance additional., they are able to replace the toner under warranty if it is still valid. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If the replacement toner does not resolve the problem, then the printer will need to be repaired / replaced.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Good luck!

• LaserJet pro m127fn mfp: fax log report

  How to open a journal report or faxes Fax activity? Not only the most recent Telec.

  solved; found the report of activity under Configuration > Fax reports

• HP LaserJet MFP M127fn Pro: Cannot save a HP LaserJet Pro M127fn MFP scan after update Mac Sierra

  I have a HP printer/scanner/fax multifunction, and after updating my Mac OS X Sierra, the "HP Scan" app does not allow me to save my scans more. Printing seems to work very well. Scanning occurs, but when it comes to saving what I scanned, 'save' button is grayed. I have read elsewhere on the forum than what has happened to other people using ordinary scanners (not multifunction units), but the software offered for regular scanners would not apply to my device.

  Hello

  It is incompatible with the Sierra of HP scanning.

  Download and use HP Easy Scan instead, it can be downloaded from the link below:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_6_1.pkg

  Kind regards

  Shlomi

• LaserJet Pro M127fn MFP: MFP M127fn - cannot scan to PDF

  I just bought this all-in-one printer and I cannot understand how to set up to scan to PDF.  I installed the software from the CD, then tried to install the software from the web site.  I uninstalled and reinstalled Adobe and do not yet have the ability to scan in PDF format.  I found a post from 29/07/2014, but did not include the statement: "once the analysis of HP software, click on save as PDF."   I spent half a Saturday search and try any solution that I could find, but still no luck.

  Hi @JanieBird ,

  I see that you have problems scanning to PDF. I will do my best to help you.

  Here is a document for scanning with the HP scanning software.

  The analysis of Windows 7 with full software features HP all-in-one HP LaserJet printers.

  This is a screenshot of the HP scanning software that you should see. You will see all the options for scanning of. Do not take into account the model number.

  

  Download and run the Print and Scan doctor if you are still having problems. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  Good day!
  Thank you.

• LaserJet pro M277dw MFP: double-sided printing

  Really frustrating! New printer, put in place and works well with El Capitan except I can't seem to find a way to configure for automatic duplex copy. Read all the forums, but the options do not exist with El Capitan! Can someone help me please?

  Hello

  You related to automatic duplex printing or copy? While your title refers to printing your description refer to the copy...

  Regarding printing, follow the steps below to automatically print double-sided print jobs:

  In the file being used to print click the file menu and select print.
  NOTE: The print window might be minimized. Press show details to show all available print option.

  In the print window expanded you will find next to Copies the checkbox for duplex. Select the check box.
  NOTE: If the check box does not appear in the specific application print dialog box, skip this step.

  To select the connection type click the selection box below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  5. Select the menu drop down.

  6. set the duplex option as the binding edge (Portrait) Long or short edge (landscape) bond.

  You can save the settings for later use by clicking preset > save current settings as preset. By default, a used preset will remain until another preset will be used.

  About two-sided copying, the M277dw offer that duplex printing features, not copy both sides of a document original two-sides.

  Kind regards
  Shlomi

• LaserJet Pro 400 MFP: LaserJet Pro 400 prints not Google Chrome

  Sorry, please answer my question in the forum somewhere but I can't find.

  Since I got my new LaserJet Pro 400 MFP I can print is no longer things such as my weekly payroll tax receipts.  I use Google Chrome.  When I try to print, I get only the options to 'Save' or 'Cancel' so I have to save it, then go to My Documents, find it and print it out.  I would really like to continue to use Google Chrome, so it's an another printer driver that I need to use?  Thank you!

  Hello

  You need not of any other driver, just point Google chrome to the right pair...

  Google chrome opens the print dialog box, and then press the button change.
  Select your printer from the list instead of the default save as PDF option and try to print again.

  Shlomi

• Color LaserJet PRO M277 MFP: HP Color LaserJet PRO M277 MFP Fax

  Hello

  I'm using my new printer HP COLOR LASERJET MFP M277 PRO and his works fine. I just have1 problem, I want to fax a document and I can't seem to do. Can you please explain me how to fax.

  Thank you

  Hi @RitaR07and welcome to the community of HP.

  I read your message, ask questions about how fax on your HP Color LaserJet MFP M277 PRO, and I want to help him.

  Below, I've posted a document that explains how to set up the printer for faxing, as well as how to send a fax. Please try all the steps in this document and let me know the results, as well as the problems or the error codes that you met.

  Send and receive faxes with the HP Color LaserJet Pro M277n MFP and printers M277dw

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• MFP HP LaserJet Pro 400 M425dn will not print the text to format 72 points or more

  My workplace has recently bought a M425dn of MFP HP LaserJet Pro 400 all-in-one printer. It works perfectly except for the fact that it will not print text that is 72 points or larger in size. I tried many fonts that are installed with Windows, and all them print correctly to the point size 71.5 or smaller; Another thing simply does not appear in prints. Content which is of size to 72 points or more * fact * affect the flow of the content printed on the page, however. It's like the 72 points or larger text takes up space, but it is completely invisible on the printed page.

  I tested using Microsoft Word 2002 on three separate computers, of which two have installed Windows 7 and Windows Vista installed. The problem is the same on all three computers. The printer is connected via an ethernet cable to our wired network. I have installed the printer software included, and I don't think that there are updates for it that have not been installed up to this point.

  Any thoughts on how to solve this problem?

  Hello, I just made an account to solve this problem for you guys because it has been a puzzle to me also...

  I apologize before the huge hand for the terrible grammar and punctuation that I'm in a hurry

  Now it does not work for everyone but I fixed it on my machine with the following

  now before you print it... .use (ctrl + p) in your text editor to open the print window, click (properties), and then navigate to the tab (Advanced) now, I have a section called the characteristics of the printer in this category there is an option to 'send truetype as bitmap' activate this and see if it can help someone of you, for me, with this PERMIT I can print any font size my processor will allow me to type

  in my machine's plug

  Reference Dell d6420

  Win7

  Msoft word 2007

  printer itself is

  HP laserjet 200 color m276

  printer driver is

  HP LaserJet 200 color MFP M276 PCL 6

  I understand that this printer and driver is not identical to yours in itself, but the nature of these drivers makes it highly likely that this solution works for most of you

  If this can help, someone else did post more because I'll probly do not sign in to this site I created this account just for this post and I hope to solve this annoying problem issue for many of you... .no necessary congratulations

• LaserJet pro M127fw MFP: print with Windows 10

  Since I upgraded to Windows 7 to 10, I had a problem with printing to my Laserjet MFP M127fw pro.

  In the print preview the page to print looks like square rather than rectangular but the picture about this seems OK. When I print in fact the image is crushed vertically. The problem is the same print with Word, Excel and Acrobat.

  I have been informed that a new driver is required, so I deleted the old driver and downloaded a new one compatible with Windows 10 but the problem persists.

  Thanks for the help but it seems that the problem was that my screen resolution was completely wrong, so that if the image looked OK on preview before printing then it would look incorrect when printing and vice versa.