LaserJet Pro M277dw: PRINTER does NOT, DON'T COPY NOT SCAN...

Similar Questions

• LaserJet Pro CM1415fn: Printer does not print clear and precise output

  The LaserJet Pro CM1415fn can print on fabric papers?

  My fabric craft minor wife printed on papers project. She used to tape the corners of the tissue on normal paper first, but this caused the paper to jam. It then continues by gluing the tissue lightly on normal paper with a spray of glue.

  Last week, the two toner cartridges yellow and cyan to run out of ink. I bought 2 new original HP cartridges and installed it this morning when I noticed that the test page is not very clear or sharp as it used to be. Lines and colors are too full. I wonder if the print on absorbent paper may have caused this problem.

  Appreciate your support first clarify if we can continue to print on paper, fabric or not and the second how can I solve this problem.

  Hi @AhmedAttia,

  I see that you are having problems with the print quality after trying to print on absorbent paper. I want to help you solve this problem.

  Here is a document from the printer's specifications and types of paper supported. Tissue paper is not recommended.

  Specifications for HP LaserJet Pro CM1415fn and CM1415fnw color multifunction printers printer.

  Calibrate the printer.
  On the printer setup, configuration of the system, the print quality menu tap and select the item in the color calibration.
  Select calibrate now.

  Print a Diagnostics Page and print a Page to see the results.

  (it might be a specific toner, the origin of this problem)

  On the printer, press setup, menu reports, diagnostics page.
  On the printer, press setup, menu reports, print quality page.

  I have a document with a few steps to try to see if this will solve the problem.

  Solving print quality problems.

  If you need help, let me know.

  Have a great day!
  Thank you.

• Color LaserJet Pro 200: Printer does not finish pre-seminar when turned on

  When I turn on the printer, it does not meet the criterion of self-diagnosis. All the icons of perimeter lights up but the screen itself is empty. I have already disconnected the printer with it. I also connected the printer directly to a wall outlet using a different power cord. That is what it is?

  Well, I'll send you a few indications of how to perform a factory reset. You should see a message in your Inbox shortly.

  If the printer will not turn on always having the light of the foregoing, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after doing the reset. If you are able to print or if you arrive to a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Color HP Laserjet Pro 200 M251n does not in Sleep Mode

  Printer: HP color Laserjet Pro 200 M251n

  Firmware: 2014-06-04, Version 20140521

  Problem:

  Since the last update Firmware the printer does not sleep/wake no event (all configured to wake up the printer) will wake up the printer. Even to connect via Webinterfac the printer does not respond. Ping also fails.

  Tried to connect the printer to the printer ports / wall plug changed network cables nothing worked.

  The only solution is to reset the printer (power off / on) to get the printer working again.

  Played a bit with the EcoSmart configuration, but little matter what is selected it its always the same as the printer stuck sleep/sleep mode and don't responde.

  Y at - it somewhere the old FIrmware to download to try a downgrade if it would help?

  I really don't think there is anythink else I could try.

  just to confirm that the last Firmware update solves the problem

  If I remember correctly it when, one day in December when it came out

• LaserJet 1320: Hp printer does not not on Windows 10

  I just recently upgraded to Windows 10 and the HP LaserJet 1320 printer does not work. I went to the site and downloaded the correct driver (64-bit). The printer appears in the printer list when I go to devices and printers, but can not choose the printer when I go to print something. If I go into settings > devices in Windows, I'll see the printer listed, but I can not set the default printer, and it says "Driver is unavailable."

  Is there a better driver, or a way to fix this?

  Thank you.

  It is connected through the USB port, and of course, I tried connecting directly first, who did install a driver, but he had the same result as the download of the driver separately. I was finally able to make it work by installing a different driver, which I don't remember, but this has been resolved weeks ago.

• HP Officejet Pro 8600: Printer does not print in color

  I just got the color cartridges refilled at Costco. Now, my printer does not print in color.  I printed out a diagnosis and cartridges are showing that they are full.  The actual color of magenta is a deep rose, so I know that some of the magenta is crossing. Cyan (blue) and yellow printed black on diagnostic tests.  I know that Costco filled cartridges with the appropriate color because I can see the color on/in the cartridge.  Suggestions on what to try? I bought the printer on January 27, 2013.

  Hi @monitons,

  Welcome to the Forums of HP Support!

  I see that your HP Officejet Pro 8600 printer will print correctly since fill you the ink cartridges. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you are experiencing.  It seems that there is a problem with the print head or ink cartridges.

  To determine the cause, I would like to use this document:

  • Fixing poor print quality

  If the problem persists, I suggest you try a new complete set of ink cartridges.

  How many times have you filled out the ink in these cartridges?

  TIP: Reloaded cartridges can stop functioning over time, if the nozzle one chip or ink is damaged.

  Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Laserjet Pro CP1525nw, WiFi does not work

  I need help to connect my HP Laserjet Pro CP1525nw printer to my Alienware computer.

  I tried setting up as a wireless printer and nothing I do works.

  I tried to use the CD Rom supplied with the printer. I also downloaded al the drivers on the HP site and tried those.

  After each attempt to set up the printer for wireless operation, I removed / uninstalled drivers and software and all reinstalled as directed.

  When you attempt to install ast I selected the Option that is suppose to set up an Ad Hoc device.

  I have reset the printer settings to factory default, active internal wireless system (on) and blue light (on) indicating that the printer is wireless and transmission mode.

  My computer is not identiifying or acquire the HP printer?

  Overview - problem number 1. After inserting the CD-ROM installation, following the instructions on the screen and observing the facility to deal with "that took a lot of time" instlation process gets to 99% and stays there for a long time. "After a long period of time a MESSAGE of error to indicate (to paraphrase)" process went long to complete "if it please restsart your computer and try reinstalling the device..." I repated this step several times over a few days and several hours without success.

  Note: The only success I've had has the printer with the USB port connected to my infographic.

  Additional information: our home network is ATT Uverse all-inclusive (telephone, Internet, cable)

  My Alienware computer is connected to the internet through Att Uverse, no problem.

  Operating system - Microsoft Windows 7 Ultimate with all current updates.

  Viruse protection - McAffee Security Center (computer is fully protected):

  Any suggestions, comments, instructions, would be greatly appreciated.

  Kind regards

  John Rapp

  * E-mail address is removed from the privacy *.

  Hi JohnRapp,

  1. what happens when you try to install the printer?

  2. you receive an error message?

  Follow the following troubleshooting methods:

  Method 1:

  Perform the following troubleshooting steps.

  Hardware devices do not work or are not detected in Windows

  Method 2:

  Check out the following link to install the printer on a home network.

  Installing printers in Windows 7

  Install a printer on a home network in Windows 7

  Printer in Windows problems

  Note: I suggest to copy the printer driver from the CD to your local hard drive and then try to install the driver from the driver on your hard drive.

  For more information, see the following link for the support of hp.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4052980&task

• Have the new MacBook Pro, made Apple updates for HPprinter c309a scanner, I can print, does not scan.

  I have a new MacBook Pro retina and have spent at the Apple updates and updated my c309a scanner all-in-one printer HP Photo Smart.  It will be printed from my computer but will not scan.  It worked perfectly with my 2008 MacBook Pro.  Can you help me get the scanner to work?

  The c309a is networked with a PC and it works.  Why the Apple update does not resolve the driver, or whatever is the problem, so that I can scan from the MacBook Pro-Maverick?  All this has worked in the past.

  Yes, using the preview method works, but the other two do not.  When I get to the point where I would see print and Scan - I don't have a printer and Scanner of choices that do not allow me the choice (s) from there, as suggested...

  Guess I'm stuck with using the method of previewing until Apple finally gets the appropriate update to solve this problem.

  Thank you.

• HP laserjet CP2025 my printer does not recognize my spooler and I tried to remove and download the new drivers with no result. Help, please

  I had recent work done on my computer, which should not affect my printer, but it did.  My system won't let me download a new driver for my HP Laserjet CP2025. It gives me several spooler errors.  I tried the process to start, Control Panel, administrative tools, Services, and then there is no button print spooler Services click on. So in some way it obviously was wiped out when they saved my computer and installed the new screen. HP site doesn't let me download because it sites that this driver is installed with Windows 7. Any suggestions?

  HP does not include drivers for this model, you will need the driver through windows update

  If you say that the print spooler service is not in service, it can help

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/print-spooler-service-missing/ca883d0c-66dB-4599-A886-b8be2ec1ef5f

• Inkjet pro 6830: printer does not except off the coast of brand ink cartridges.

  I bought a new pro 6830 2 years and it was recalled for replacing head inkjet printer. Since I received

  reconditioned replacement, it does not except other other than HP compatible ink cartridges. I hear here

  is going to be the fix for the problem. Is this true?

  Hi @79pinetree,.

  Thank you for joining the HP Forums!

  I understand that your printer HP Officejet pro 6830 does not except off the coast of brand ink cartridges. I am pleased to see that for you!

  Please see this post, dedicated to the best printing experience, of @Bill_F.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that answers your question!

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• Complete the features of my printer office pro jet L7780 does not (scan and fax)

  I can not scan and cannot fax.  I have no hp Solution Center to my office jet pro L7780 printer. When I tried to reinstall the software for windows 7-bit, I got an error message stating MSI > MSI_BPD_Scan.  I followed the instructions how to solved the problem by selecting run, and then type MSIexec / register but the file is not found in my system.

  Hi sschocker,

  Have you followed the steps in washing I provided?

  Follow the steps below to check the WIA Service:
  1. type services.msc in run or search and files program
  2. scroll the page up to the WIA Windows Image Acquisition
  3. make sure that the service is running. Click on stop and then restart to ensure
  4 restart the computer
  
  Restart the services of dependencies:
  1. Click Start, in the search box type "services" without the quotes.
  2. scroll down until you see Windows Image Acquisition (WIA).
  3. double click on it and go to the Dependencies tab.
  4-2 services must be listed.
  5. close this window and look for the remote procedure call (RPC).
  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.
  7. go to hardware detection kernel and Double click.
  8. set the Startup Type to manual and click on apply.
  9. you should be able to start the service by pressing Start.
  10 now, you are done and the Twain Manager must work and gives you is not a mistake. This should solve your problem

• HP Laserjet III: The printer does not print

  I have a HP Laserjet III printer that I used with my HP laptop. The computer has Vista Ultimate. The printer has a parallel port only. A parallel to USB cable port was placed on the printer that the computer has no parallel port. Several years ago I installed the printer on this computer and it was working fine until yesterday when I accidentally deleted the printer when I was looking for cancel a print job. I tried the printer function added in the Control Panel, but the test is given a printing error message or disappears without printing. I tried plug-and-play, but the printer is not seen and is not installed. Printer drivers are suspected to be part of windows, but I can't find printer drivers, there is a HP Laserjet III printer installed to LPT1, but this computer has no LPT so not sure how it was installed. Of course, that does not print the printer is not connected to the computer. How can I install this printer to make it work on this computer?

  When you deleted the printer you may have removed the entries between the usb adapter to the computer and the printer.  If you have a disk provided with the adapter which can help you get it going again.  You're dealing with two objects here and it is possible we won't communicate again.  Try another card kind of force the computer to see the new map and help you get the printer working again.  There probably many registry enteries that have been established when you plugged the adapter between the two devices together.  Some of these entries went when you deleted the printer.  One more thing, you can try is to do a restore of the computer to a date before you deleted the printer.  Who will restore the registry at this time and even the printer.  I would establish a restore point before going back just in case you lose something more important with dating back.

• OfficeJet Pro 8610: printer does not appear in the list

  After an update of Windows 10/diversion, my HP Officejet Pro 8610 is more listed in printers.  I tried to reinstall everything, restarting, disconnect, find printer can't find anything (the printer is right next to me).

  Help!

  Thank you!

  Hi@millermom,

  Thank you for the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  The printer is not detected after Windows update. Is this fair?

  I would definitely help.

  First, uninstall the old drivers installed in your PC by following the steps below.

  • Right click on "Start" and select "programs and features".
  • Find the option that the printer name and then click "Uninstall" on the top of the window.

  Restart the PC and download the latest drivers for the printer from the link below and install the printer. It should work.

  http://ftp.HP.com/pub/softlib/software12/COL51184/bi-124093-4/OJ8610_198.exe

  I hope this helps. Let me know to learn more

  Happy announcement.

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

• LaserJet M1213nf MFP: Printer does not print the claim code more

  I use a chromebook, so I use my printer as a Google Cloudprinter. Usually, I'm able to get my printer using claim code that is printed in the Backgrounder (this information sheet is printer when I activate HP Webservices on the printer).

  For some reason, I seem to be impossible to activate the Web services successfully. I have a guest that webservices are enabled, but who is supposed to have printed information sheet no longer get printed. So, I don't know what is my claim code, and accordingly I seem not to be able to print more Google Cloudprint.

  I can connect to the site HPConnected, I can't add a printer because I don't know the claim code.

  Can you please let me know what I might hurt? How can I get the claim code?

  Thank you

  KNK

  Hello and welcome to the HP support community!

  Is your ChromeBook and printer using the same wireless network?  If so, have you tried to install the "HP Print application" of the Chrome Web store?

  Please see the document which contains the instructions for use of HP on a Chromebook print.

  http://support.HP.com/us-en/document/c04683559

  Here is the HP article on "How to get the claim code".

  WyreNut