LaserJet pro MFP M127-M128

Similar Questions

• LaserJet pro 177: bought used hp color laserjet pro mfp m177

  Installation disk arived broken. How can I do to replace it.

  Just upload what you want the site web theHP.

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet Pro MFP M177

  This printer can work with PCL5 or PCL6?

  >... can this printer works with PCL5 or PCL6? ...

  N °

  According to the specification, series printers LaserJet Pro MFP M177 only supports the Cffp/PCLmS of Language of Description of Page (PDF-based PDL ).

• Other driver for the LaserJet Pro MFP printer

  Can anyone suggest another driver for a Mac Mini (OS X 10.4.11) print on a LaserJet MFP M127fw PRO?

  Hi @suckerfish1,.

  I understand that you are looking for drivers for the 10.4 to use with the PRO LaserJet MFP M127fw. I can help you with this.

  Unfortunately 10.4, is not a supported operating system, there are no drivers available.

  Here are the supported Mac OS X operating systems: Mac OS X 10.6 Snow Leopard, OS X v10.7 Lion, v10.8 OS X Mountain Lion.

  HP LaserJet Pro MFP Color LaserJet MFP printers specifications M177fw Pro and M127fw.

  You must upgrade to 10.6, or get an another Laserjet supporting 10.4.

  Good day!
  Thank you.

• HP Laserjet MFP M127fn Pro: Cannot install drivers for printer HP Laserjet Pro MFP computer M127fn on the new laptop from acer windows 10

  This is my third attempt failed to install new drivers for the Laserjet Pro M127fn MFP printer on my laptop Acer windows 10 OEM. I used the HP installer with no customiztion of components (the default recommended) with USB cable connection. It goes up to the product configuration step 99% and then gives the error: "an installation operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run Setup again. If the problem persists please consult product suppprt web site of your product... » »

  I also tried to use interface devices and printers after restart the computer by selecting Add Printer option, it seemed to have installed the printer but it couldn't print the test page. Any help will be greatly appreciated.

  Thank you.

  Hello

  Printer navigate through the Setup menu using the left and right arrows and locate the Service menu.

  Search for HP Smart Install option in the Service menu (it may appear and may not be no depanding on the version of your printer), if it is there, select Disable for HP Scmart Install.

  In your PC click on the right button on the start menu and select Control Panel, then select View devices and printers.

  Do not forget to remove any icon (the M127 or any other driver HP) HP printer by clicking the icon and selecting Remove the device, and then restart the computer.

  Go back to the devices and printers any queue remains left by clicking once, then select press the print server properties in the top menu bar.

  Select any listed HP printer driver and select Remove, make sure to select the 2nd option to delete the printer and its driver package.

  From the control panel home, type "change device Installation settings and open the option, then select No and confirm with OK."

  Now, try to reinstall the most recent drivers and check for the difference.

• Color Laserjet MFP M277dw Pro: Reset the Laserjet Pro MFP M277dw admin password

  Hey.

  I just bought a printer Laserjet Pro M277dw for use in the home. Most of the functions are now running. But when I tried to config 'scan to email' I've been invited to a password. Same thing happens when I try to access the settings. The password only I got was when I was turning off / disable fax settings. Now this work is not password... (password was only 8 digits)

  How can I reset/change password admin on my printer?

  Concerning

  Jonas

  Hey @Jonas1,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that your MFP LaserJet Pro M277 dw printer has a password admin on it and you want to remove it. I can help you with that.

  I will send you a private message with directions on how to perform a factory reset on the printer. You should see arriving shortly.

  Please let me know if this resolves your problems or if you have any other questions. If not, have a great week!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.
  
  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• Color Laserjet MFP M176n Pro: Color Laserjet Pro MFP M176n stuck on initializing, Toner carousel will not go

  Hello

  Our Color Laserjet Pro M176n MFP is stuck at initializing, since the last time that the yellow toner cartridge has been replaced. After the replacement of the cartridge, the toner carousel turned, started making rattling noises and then stopped. She does after every start. It seems that there is something blocking the movement of the carousel, since I can't move it even manually as described in of many other forum posts on similar problems. Is there a way to access the back of the carousel to see if there is something blocking it from moving?

  Thanks for letting me know @samuelm.

  I don't see any other way to access the tonics. The printer will need to be repaired. Thank you!

• HP LaserJet Pro MFP M125-M126: cannot set the default printer

  Hello

  We have HP LaserJet Pro M125 - M126 PCLmS network MFP all in one printer, as the installation of all users was a success and was working fine the day of installation, after a day all users face the question cannot set default pritner, cannot print, all users are faced with question at a time ,

  quick response is appreciated,

  Hi @darshan9 ,

  I see that you have problems affecting the default printer for users and you cannot print over the network.
  I'd love to help you.

  Do you mean the configuration of individual computers with the printer on the network users, or a computer with multiple users?

  You have administrative rights on the computer to make changes?

  What is the name and the product number of your printer? How can I find my model number or product number?

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. http://www.hp.com/go/tools > using HP diagnostic tools for printers under Windows HP.

  I suggest you to check if you have another account user or an administrative account.

  I also suggest to create a new user account and check if you are able to set the default printer.

  Create a user account. Create a user account.

  If you're still having problems, run the Fixit tool. Diagnose and automatically fix problems printing and printer.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If there is anything else I can help you, let me know.

  Good day!
  Thank you.

• M225dn LaserJet Pro MFP: HP Laserjet pro mfp225 printer return code: 1603

  I tried to install the drivers for my new LaserJet Pro M225dn MFP printer but I get the following message:

  Setup\Core\SIPM_32\HpTcpMon.msi' /qnREBOOT = ReallySuppress

  Path:

  Return code: 1603

  I downloaded the drivers from the HP site - did not work

  tried to change in the security-services-printer automatic spooler - did not work

  I can print, but I can't scan. In addition, I do not see the HP support toolkit anywhere...

  can you please tell how to do?

  Thank you!

  Hi fofico,

  You are welcome!

  Please, try the steps in the following order:

  • Uninstall the software.
  • Start the computer in minimum mode.
  • Disable all Antivirus programs.
  • Disable all firewall programs.
  • Create a new user account.
  • Reinstall using the HP printer install wizard for Windows.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope these steps help!

• M477fnw LaserJet Pro MFP: Print not offline

  The printer is set up wireless.

  Installed correctly according to the test page.  Can't pring offline... Word documents, articles, etc.  Print a copy of my email, newsletter articles, nothing online.  Technical support HP and a nephew, working for a COMPUTER company ran Diagnostics remotely and both agree with the test page, that there is nothing wrong and I should be able to print off line.  I tried to reinstall a few times and with options of different configuration, but always using the supplied with the printer setup disk.  The installation disc is updated according to the option ' check for updates ' during installation.

  Technology HP said it's probably because the IP addresses of the printer and the pc are different.  Printer laser HP 3 year has a similar IP address as the new printer and it works fine on my wireless network.

  Before buying this LaserJet, I could not find a review for this product so no known problems to watch out for.

  Does anyone have a suggestion (s)?   Thank you.

  Just discovered this LaserJet Pro M4777fnw MFP does not print the Word documents, PDF format only.  Will Support HP drop a line of detail so the next time, they will know the answer.

  The problem is solved!

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet Pro MFP M177 cannot find information network

  I just got my new printer today. I followed the instructions to the letter. Now I try to connect to my network to the "Wireless Setup Wizard" that my router does not support WPS. I sat waiting for the printer view all networks in the range so I could choose mine and continue on. However, after 15 minutes of waiting, I decided to go shopping while he did his thing. I came back 1 hour later and it's still displaying "Retrieve information from wireless network" with the symbol of HP and a blue bar encircling it. It is not locked up as I can hit the Cancel button and it returnes to the network configuration menu. What I'm doing wrong here? My network uses a router NETGEAR WNDR4500 with security WPA2-PSK [AES] is enabled. It transmits the band b/g 2.4 Ghz and 5 Ghz n band. Please any help would be appreciated.

  Hi @Rieu,

  Welcome to the HP Forums!

  I see that your HP Color LaserJet MFP M177 Pro cannot find the network on Windows 7. I'm happy to help you with this problem of connection!

  Please, take a look through the steps in this guide, "Printer is off-line" Message appears on the computer and the HP printer does not print. Thus, this guide, the printer is not maintaining the wireless connection.

  Tips for troubleshooting wireless problems

   

• LaserJet Pro M177FW MFP: Laserjet Pro MFP M177FW stuck in initialization

  I bought a LaserJet MFP M177fw Pro a few days, and during installation, he immediately found himself in initialization mode. I tried to restart the printer and reinstalling the drivers, which are correctly installed according to my computer. It is plugged directly into a wall of output, not a surge protector and I have tried unplug, wait a minute and reconnecting.  I tried to update the firmware, but the installer think that the printer is in error mode and will not go forward. I scoured the forums HP but was not able to solve problems more.

  The scanner works fine when I said to scan from the desktop, then the computer and the device is certainly speak to one another.

  In addition, the printer is supposed to make a loud click and rapid when it is turned on?

  Thank you!

  Hi @SSI_Diver,

  Thanks for providing this information. You can Contact the Support HP to inquire about the service. Check the model number and the form to receive a file number for faster assistance. Thank you.

• Color LaserJet MFP M177FW Pro: 126 a Toner can be used with Color LaserJet Pro MFP M177FW?

  I recently bought a Color LaserJet MFP M177FW Pro and still have 126 a toner cartridges (magenta, cyan and yellow) for my LaserJet MFP M175 precedent. I can use them rather than the cartridges of 130a recommended?

  Hello

  Only 3 printers can use HP 126 has:

  http://WWW8.HP.com/us/en/products/OAS/product-detail.html?OID=4148379#! tab = compatible_hosts

  Kind regards.

• MFP M277dw: M277dw LaserJet Pro MFP - cannot print from word, PowerPoint and excel

  Hello

  I just bought a Pro M277dw MFP LaserJet

  It can not print a word a simple page, PowerPoint, and excel.

  No error message with word.

  is the printer online for PowerPoint.  (when I just did a test of the printer page)

  In excel it says maybe NOT enough avaiable memory...

  I find that very strange that it only 1 page and nothing else is running.

  Please review this issue as soon as POSSIBLE.

  Thank you

  Dear Liquid083,

  Well done.

  Thanks for leading me in the right direction

  This "Universal Post Script driver" has worked for my word, PowerPoint and excel

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4157320&swLangOid=8&swEnvOid=4132

  For others who are facing the same problems, please click the link above.

  Then look at what follows.

  HP for Windows PostScript (64-bit) universal print driver 6.0.0.18849
  11 December 2014 19.3

  Thank you

• HP color laserjet pro MFP M176: mode of cooling MFP M176n Printing problem

  I have just boughjt a HP Color jet pro M176n MFP laser now is always see the "cooling printing mode", after a few pages print. It's too long to be completed print jobs. Appreciated if you could help solve the problem of urgency. I tried all the solution suggested above, I am desperate, please send me a private message as you have done for others, I need a viable solution, or I might have to return the printer

  Hi @xpresscomputer,

  I understand that you get an error 'Cool-down '. I'd love to help you.

  I didn't know what steps you have tried so far, so that I provided all the steps to see if it will help to solve the problem and I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  I have provided a document with Messages from Control Panel solve.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Update the firmware of the printer. Software and Driver Downloads.

  If the problem persists, please call our technical support at the 800-474-6836 for assistance. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Good day!
  Thank you.