Laserjetcolor mfp177: printer Hp LaserJet color mfp177 not booting not

Color of HP LaserJet mfp177 not booting not not after power on, makes noise, then shows HP on the screen.not a new machine, it worked.

You could try a NVRAM reset with the attached instructions. If this does not work, you will probably replace the formatter. First thing is to disconnect the form printer computer or network and just be able to go to him.

Tags: HP Printers

Similar Questions

  • HP CC522A - size of the PRINTER HP LASERJET COLOR MFP M775DN 700

    HP CC522A - size of the PRINTER HP LASERJET COLOR MFP M775DN 700

    HP CC522A - size of the PRINTER HP LASERJET COLOR MFP M775DN 700

  • My kodak 5100 print part of color but not black

    My printer does not print the part of the text in black. Part of it prints but not all. The part of color is very well

    Hi marlaheaston,

    1. you remember to make changes to the computer, after which the issue started?

    2. have you checked if the cartridge is empty?

    I suggest to try the steps from the link to the following article and check to see if it helps:

    Printer in Windows problems

    I hope this helps.

  • USB printer (HP Laserjet 1012) is not recognized. Help, please.

    It is urgent, please!

    Hello TximasBala,

    Thank you for your message.  To clarify, when you say that your printer is not recognized, do you mean that when you plug it in via USB it is not or not you can not install the printer?  If the printer does not appear after you have connected to your computer, try another USB port on your computer.  If the driver is the problem, you can click HERE for the latest print driver.  Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • HP laserJet MFP Pro M225DW printer: printer HP laserjet MFP M225DW not install on windows Xp sp2

    During the installation phase, I get a fatal error:

    A fatal error occurred prevents use of the product.

    Click 'Cancel' to cancel the installation.

    No reason. No work around. Reset did not work. Download the basic driver came with the same error.

    But installed on Win 7, 8 succeed.

    Help, please.

    Hello

    Printing software requires Service Pack 3, you can find system requirements below:

    System requirements: Windows XP (32-bit) Service Pack 3http://support.hp.com/us-en/document/c04328137
    

    You can follow these steps to upgrade your operating system, it is necessary to install the HP software for your printer:

    http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

    Kind regards

    Shlomi

  • HP Color Laserjet 2550n will not print in color?

    My HP Color Laserjet 2550n will not print in color?

    I spent half a day Googling this issue and could not find any solution?

    When I press the go and cancel the 3 test pages print fine in color set button.

    But if I try to print anything from my laptop, it's all B & W.

    I already installed the latest version of PCL5, PCL6 and PS drivers from today:

    http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=388401&lang=en&lang=en&cc=us&cc=us

    None of them print in color?

    I think that is the question:

    http://i.imgur.com/WM8Oy92.PNG

    But, how to fix this?

    My OS is Win 8.1Pro x 64 with all updates installed.

    The colour toners are 100%, black is at 28%.

    rk_russelking: your suggestions have been COMPLETELY & TOTALLY USELESS.

    I found the answer here:

    ... «in the printer properties, select the tab settings of the device, scroll to the very last item at the bottom, which is 'Device Type'.» The value displayed (which of course got auto-installé as a default value, for both PCL6 drivers), is "AUTO-DETECT". You would think that would work, but it apparently does not.

    In any case, by selecting the drop-down arrow, it turns out that there are three available values: AUTO-DETECT, COLOR and MONOCHROME.

    Of course she then had me select COLOR, click APPLY and then click OK. I repeated the process for the other printer PCL6. »

    http://i.imgur.com/dxultKG.jpg

  • Color Laserjet 3700: Could not get a traditional UPD at work printer driver

    I had a problem with my 3700 today when I sent a job to him, he asked 8.5 8.5 "book.  When I got to do my work 4si weather.  So I guess it was the driver.  Deleted the printer, downloaded and installed the new driver.  I installed the traditional pilot, like what I always had.  After that, I could no longer print to any HP printer that I have on the network, including my old HP4 with its old drivers.  Any program, when I go to print, just programs lock up.  When I change my default other than HP printer, the print dialog box appears.  If I choose a printer not HP, all right.  If I choose a printer HP laserjet, including old HP4si, the dialog box shows waiting for printer to be available, and programs to lock up.  I've been using a lot on this... removing the drivers, reinstalling, removing packaging... all without help.  I found now that if I install the driver as 'dynamic' I can print, but I have to go through the dialogue and choices and the printer and so on.  I want to use the traditional where I can print and do, as I have for years.  Can somone point me in a direction that could help solve this problem?

    I wasn't able to get the drivers of the UPD to work with any of my HP LaserJet.  I uninstalled the HP printers, removed packages, then went to Windows and used Microsoft Windows drivers provided instead of the new drivers of HP, and all my HP printers are works well without any problem.

  • HP Laserjet CM1415fnw does not print wireless

    Original title: HP Laserjet CM1415fnw

    My printer has stopped printing wirelessly from my PC (but prints OK when connected with a CAT5 cable). My PC is connected to the router (BTHomeHub) wireless, I can browse and enter in the config. My printer says it is connected to the router with the identifier SSID is correct and past Network Test Wireless HP on all points. I got the impression of having a fixed IP address in case it was a DHCP problem and a static IP address reservation in the router. However, in the router settings advanced, the router says the printer is not connected and I cannot ping the router from my PC. It was working fine until recently. Any ideas? THX.

    Hey Kevin,

    What version of the windows operating system is installed on your computer?

    Refer to the steps in the following article and check if it helps.

    HP Print and Scan Doctor

    Printer HP LaserJet Pro CM1415fnw color multifunction - software installation of the product on Windows for a network connection Wireless (via an Access Point)

    Printer in Windows problems

    Keep us updated on the status of the issue.

  • The red color does not print correctly. Have just replaced the Red cartridge and the problem remains

    HP Color LaserJet 2600n, Windows 7 64 bit

    The red color does not print correctly, it of a weak orange and turn yellow on the edges.

    The problem is, even if we just replaced the cartridge.

    The other colors are fine.

    I'm sorry.  It's a consumer forum and your printer is a product of the company; would be better served on the forum planned for it.  The business forum will be experienced in printers of business community members and expose the post more than members with the knowledge needed to answer.

    http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.UDQAKt2PUaA

  • the white pages when printing for laserjet pro 200 color MFP M276nw

    When printing to my color Laserjet pro 200 M276nw MFP, the pages are all empty.  I tried to put off the printer and tried to have disconnected and reconnected.  That did not help.  The pages are still blank.  Any suggestions?

    You are unable to print the 'print quality Page' of the façade or do not know how?

  • Printer drivers HP LaserJet M1005 MFP not supported for Windows 8

    Dear support,

    I use the printer HP LaserJet M1005 MFP range, but the drivers are not supported for Windows 8.

    Pls can update you with the new drivers of windows 8, which his slove my problem.

    Thanks in advance

    Concerning

    Vermorel

    Hi Majusko,

    If the Windows 7 installs on 8 to win, you must wait for the pilot to Win 8 to be released. Basic/Host-based driver available February 2013

    HP LaserJet and Color LaserJet - Windows 8 media

    HP trade-in program

  • LaserJet Pro 400: Watermark not printing on Laserjet Pro 400 on Windows 8

    On the computer of Windows 8, watermark does not print on Laserjet Pro 400 connected by USB. Please note: the function watermark works on other printers not HP, as our networked Ricoh copiers. The printer prints a watermark on a Windows 7 computer. Using the driver package LJM351_M451_Series-12200-drv_installer.

    Very hard to advise without additional evidence (such as samples).

    With my Windows 8.1 Pro 64-bit system, I can print watermarks on my LaserJet Pro MFP color 400 M475dn (equivalent of MFP M451) device.

    Attached is a zip container file:

    • Small text in the abcde.txt file that contains the text "abcde".
    • Print file abcde.prn contains the print job generated by opening the text file in Notepad and by printing the document (using the driver of HP LJ300-400 color MFP M375-M475 PCL 6 (61.120.5.12262) UPD version 5.3.0.12262), by specifying the "SAMPLE" watermark with the default settings; exit 'captured' by using the option "print to a file.
    • Text file abcde.prn_analysis.txt contains an analysis of the contents of the print queue.
    • PDF file abcde_scan.pdf shows a scan of the printed output by sending the contents of the direct .prn file to the printer port.

    Try to send the contents of the .prn file direct to your printer port; for USB connect, you must use something like:

    copy  /b  abcde.prn  \\computer-name\share
    

    in a Windows command prompt session, where:

    the computer name is the name of the workstation;

    share is a share of the Windows printer instance name.

    The resultant prints show the watermark of the SAMPLE ?

    If so, then the printer handles the commands to the printer (in this case using PCL XL) OK.

    Can generate something similar to your driver for analysis?

    [You will probably need help moderating to attach files in this forum].

  • All-in-one Photosmart HP 3310: colors may not print correctly on A4 photo paper.

    My HP 3310 printer gave me great prints for many years, but during the last 12 months, 210 x 297 mm prints threw a desaturated look and brightness has dulled as well. My photos 10 x 15 cm print perfectly.

    I did all the recommended suggestions, cleaning of the print head, aligning the printer even restore to factory default to no effect.

    I use Spyder Pro 5 to ensure that I have the exact colors on my screen.

    I printed via the printer settings and also the settings of Photoshop.

    At the present time, all my photos contest must be overexposed and strongly saturated for previously appreciated results.

    I only use HP photo papers and real HP363 inks.

    I hope someone can put an end to my frustration.

    Welcome to the HP Forums @-g_s70

    I came across your post about the problem you are having and I wanted to respond to help with my suggestions. Please see the guide below to resolve this issue. If the problem persists after resolution of the problem, please try to call the hotline to discuss replacing the printer or the rating of. I'll include contact info HP below to directly reach.

    HP Photosmart 3100, 3200 and 3300 Series all-in-One - the printed colors are not colors should

    Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

    Contact HP:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number appear

  • Photosmart HP 7510: Single color does not print

    Hello

    Does not print the magenta color. I put a new cartridge in (both are new and not expired).

    As requested by another post on this page, I have cleaned the contacts on the cartridge and printer with clear water. Did not help.

    I ran a printed report that says in the text that all is well, but the magenta is very slightly ridged (so not quite Miss).

    One of the ideas for what I can try next? Appreciate any help you can offer.

    THX!

    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

    If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  • LaserJet m1217 do not print through easyprint on windows server 2008 64-bit

    We have a client that has the LaserJet M1217 that connects to our window 2008 Server SP2 64-bit via Remote Desktop.  EasyPrint recognizes the printer, but will not display even a test page.  We get a FAILURE message.  We have no more need to know how to print via easyprint, or whether there is a driver that can be installed remotely.

    Hi swmotif,

    This model is only a printer based on the host only and there is no available PCL printer driver. You may not use either universal print driver. I would recommend that you connect the Ethernet printer, and then install the driver based on the host at the link below. If you still experience the problem, you can contact the seller for easyprint.

    Base driver HP LaserJet Hostbased

Maybe you are looking for