LaserJetPro HP 1102w impression takes too long
Hello
I installed HP 1102w on my laptop using the driver from the CD. Printing is configured using USB and ePrint is disabled.
Printing takes very long (18 s). When I send a print job (even test page), I don't see that it appears in the printer job window liquid. However until I see that some data has been sent to the printer (for example 4 KB / 146kb) time is about 9 seconds. To start sending data up to what the page is printed is another second 8-9 so time total is Reiver 18 seconds in the best of cases.
My laptop is:
Windows Visa Business, 3 GB of RAM, Dual-Core clocked at 1.6 GHZ, SSD drive 120 GB.
I tried to install the XPS (planned it will be faster) driver for this printer however failed to install with the 0x070c error code.
Please have a tip how to print faster (reduce the time of 8 seconds until that data is sent to the printer)
Thank you
Miro.
Hi @MKLI ,
I see by your post that the printer takes too long to print in a USB connection. I would like to help you today.
What kind of documents you print? (PDF, Txt)
Have what applications you tried?
Try a different file or application to see if you have the same results.
Try and print a self-test on the printer hardware to see if it is a hardware or software problem.
Printing a Configuration Page. Select the method two.
Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer. The USB cable should not be more then 6 feet. Try a different USB port on the laptop. Some ports are higher power then others. You may need to try another USB cable to see if that causes this problem.
Check the power on the computer to see if that is causing the problem.
How to make in the Windows Device Manager?
Go to Device Manager, under Bus for each made USB root hub controllers right click and left click on properties, for the management of the power supply remove the check box for "allow the computer to turn off this device to save energy. It allows the computer to restrict or cut off the power for this unit.
Restart the spooler to print on the laptop.
Click Start (), type services.msc in the Search box and press ENTER.
Tags: HP Printers
Similar Questions
-
My daughter Air2 IPad takes too long to save. It is plugged in, connected to wifi and the screen is locked. Any tips?
How long is too long? If it lasts for more than a few hours - and even that is too long in my humble OPINION - then something is wrong. Completely backup, because it will not terminate in any case if its been so long, forced to reboot the device and try again.
To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.
This may not work either. The backup may be damaged and you will need to remove and start over. However, its easy starting point and it will not hurt anything. If the backup will not end, he has nothing to lose.
-
I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?
Without doubt, but why not just make the day downloading overnight?
-
Why it takes too long to open attachments of the e-mail account?
It takes forever to download attachments from my mail account. I tried to do the following tasks explained on the vista forum: http://windowshelp.microsoft.com/Windows/en-US/help/6b046ae9-1434-4423-9303-400ff6fe686b1033.mspx#ESD, but none of the fixed work possible.
After clicking on open on the box pop up asking if I want to open or save the attachment, it takes too long to download. The transfer window remains open to showing that he is ready to download, but rest in this window of bhox. I press cancel and try to open once again, if the chance that it opens this file, otherwise it takes forever forceing me to cancel. Very small files most of the time, usually between 50 KB should take seconds.
I even tried to save the files, but once again the same process. The transfer case remains open but does not download.
One of the ideas.
Thanks in advance.
Hello
It is not easy to tell exactly what is happening, but it must be something with the e-mail account provider and their page. For me, this case is not a typical problem of Vista, but you can try to find the solution on Vista from Microsoft IT Pro forum.
By the way: you have an alternative email by another provider address? Is it the same situation?
-
HP ENVY 15-j110, takes too long to start
Hey guys I have HP ENVY 15-j110 I bought recently, but now, after a month it takes too long to open and sometimes only a black screen.
He
Product number is this #ACJ F6C58PA
answer as soon as possible.
This could be due to the application running in the back ground and starting applications. Try
Selective startup:
http://Windows.Microsoft.com/en-us/Windows/Run-Selective-startup-system-configuration#1TC=Windows-7
-
Take too long time to come for Windows
Hello
I have Pavilion g6-2031se and of the last two days it takes too long to come to Windows. I faced this problem for the first time and I do not use my notebook for Skype, Facebook and only very light work. Can someone help me with this?
Thank you
Ganga
@Ganga,
No worries, I would like you to try a clean boot. This allows the computer to boot without unnecessary programs or offers to start with it. When you open this document of croll to the section "How to perform a clean boot" once listed there to expand the section for your operating system to get the appropriate instructions.
Once you have made the appropriate changes, restart the computer at least 3 times and see if you notice a difference not how long it takes to start.
Please answer as soon as possible.
Thank you
-
After the upgrade of RAM it take too long to begin and start windows.
Original title: laptop
Hello
I have (HP compaq presario V6615EN)Core 2 duo 1.83 GHz2 GB OF RAMWindows vista Home premium 32-bitIt took 20 seconds to start and windows boot(Yes, only 20 seconds)When I upgraded my ram to 4 GB it takes too long to start and windows bootnearly 160 secondsHello
1 - is the operating frequency of the matches with the 'old' RAM newly installed?
2. how many RAM sticks are there?
Let's try the following steps:Also launch memory diagnostic tool. How will I know if my computer has a memory problem?
http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-i-know-if-my-computer-has-a-memory-problem
If there are 2 RAM sticks, remove one RAM Strip and check the speed. You can also try to swap the RAM sticks and check.
For more help, I suggest that you post your question in the HP support forum.
-
LaserJet pro m401dne: fatal error, takes too long to connect with the printer
Downloaded the driver of HP software, started installation and got to the point where it says to connect the printer, did, he recognizes it, start the data transfer and just takes forever. After ten minutes, I get fatal error takes too long to communicate with the printer, if aging persists restart the computer and try again.
I've made this 3 times now and same result.
Since my laptop doesn't have a cd drive, I copied the cd to a flash drive and installed the software from that. Worked perfectly. Something must be missing or corrupted download. Anyway problem solved
-
Original title: slow down the computer
Hello world
I am running a Win7 on an hp w1858 pavilion. My computer became very slow (startup takes a huge time and even my internet browser takes too long to load. I use Google Chrome btw)
I also have Norton Security Suite via Comcast which shows that my system is clean, so I don't really know what the problem is. I would be grateful :) all tips thank you
Yes svchost.exe is eating all your cpu about
Cause the most common was that the windows update system stuck
Please go to start and Panel and Windows updates
On the top left click on change settings update.
Switch to never look for updates,
After the above, restart your machine.
After reboot see if these updates are installed if not install it.
KB3161664 main download page
https://TechNet.Microsoft.com/library/security/MS16-073
Win 7 32 bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=52823
Win 7 64 bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=52794
Same deal with it if it is not already installed
Main download page,
https://support.Microsoft.com/en-us/KB/3161608
Win-7 32-bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976
Win-7 64-bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974
Once the two of them are installed,
Change your settings to update them and manually check the updates, if this is not after the passage of the parameters and save the changes.
-
Windows update takes too long to find the updates
I had just installed a new hard drive on my laptop Dell inspiron N5050. I did a reinstall of system clean of my operating system to windows 7. After that, I started to run windows update to get all the necessary updates that I need to update completely from the computer. He has worked for a very long time with no result. In addition, at least 2 hours. all the settings for windows update is set to the settings recommended. but for some reason, in my view, takes too long to get updates. can someone help me please this possible issue
Hello Darrin,
Thanks for posting your query on the Microsoft Community.
According to the description, the Windows updates take a long time to find the updates.
I suggest to follow the methods below and check if that helps.
Method 1: If your computer is experiencing problems find and install updates of the operating system, try using the troubleshooter.to of update of Windows the problem fix. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.
Reference:
Open the Windows Update troubleshooting tool
If the problem persists, try Method 2,
Method 2: run the clean boot: Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.
Reference: How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.
See also:
Problems with installing updates
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
-
Windows 7 takes too long to respond
Whenever I restart Windows 7 and once connected, the hard drive turns on indicating continue the constant disk activity. The hard drive light is on steadily (without blinking). This condition persists for 10 to 15 minutes during which all applications are extremely slow to react.
Once the constant hard disk activity, the system works normally, but largely, I would prefer to start using the system shortly after the start without having to wait for what is causing the disk activity hard finish...
even close an application as WORD takes too long and very often, he says don't ANSWER DO NOT
Thank you very much in advance for your suggestions on how to track what is happening and the difficulty of potentiall!
You connect to the internet using wireless or ethernet cable? An ethernet cable gives better download speeds and is particularly useful when you perform a large download.
-
Here I would start troubleshooting in a fglam that takes too long to stop?
Solaris 10
Flgam version 5.6.2.4
The full list of former agents running
[myname@myhost bin] $ sudo. / fglam - wq
2013-06-12 22:18:48.000 INFO [natives] send request stop at "AgentManager.
process running in/opt/Foglight/fglam/state/default (pid 26893).
2013-06-12 22:18:48.000 INFO [native] transmitted stay application.
2013-06-12 22:18:48.000 INFO [native] Meanwhile the process of "AgentManager.
(pid 26893) stopped
I'll just kill him at this time, but I had to know exactly, what happened with her. It is not the first report of the fglam power issues I've had.
You can start with a beam of support from fglam and then analyze it to see if the repetition of messages are written.
How long you wait for the fglam to terminate?
David Mendoza
-
Windows 7 take too long to the mouse and keyboard anable.
Hello
I have replace my SSD HARD drive (2 hard drives 120 GB each RAID 0) w / Windows 7 Pro 64 bit. After the replacement windows take longer time to activate the mouse and the keyboard - 5/10 seconds.
I've updated the drivers for the two, but still have the same question. The boot is faster, but the mouse and keyboard take longer to wake up.Any help?
Thank you
M. Vilela
Hi MVilela,
Thanks for asking this question to Microsoft Community!
I understand that after the replacement of the hard disk of the computer takes too long to turn on the mouse and the keyboard.
Your Windows 7 is better suited in the TechNet forums. I suggest you to send your query there.
Here is the link: http://social.technet.microsoft.com/Forums/en-us/w7itproperf/threads
It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
Kind regards!
-
My PC just newly formatted and now I can see a problem when I turn it off, he just starts to day and after that it fails... I'm worried about what it takes too long... from 10:00 until 16:00? I read an article on them, she'll just take up to 20-30 minutes, but watch?
Is there something I can do? Can normally on my return from PC? or what I need to reformat?
Hi Andrei,
Thanks for posting your query in Microsoft Community.
I understand your concern, and we as a community will try to help you in the best possible way we can.
Here are solutions to some common problems with installing updates. You might be able to fix some problems automatically by running the Windows Update Troubleshooter.
I suggest you check out the link below and check if it helps.
"Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
https://support.Microsoft.com/en-us/KB/949358
Hope the information helps, if you have any additional questions, feel free to post. We are here to help you.
Kind regards
Guru Kiran
-
my laptop takes too long to open photos
My laptop takes too long to open the pictures.
It's a HP Pavilion dm4-3055dx, processor Intel i5, 8 GB memory and Windows 7.
Thank you.
Hello
How big are your photos and what application are you using? Where are the pictures? On your computer or card reader? Have you tried opening the photos using the following software?
http://www.IrfanView.com/main_download_engl.htm
You can set it as the default Photo Viewer, it has many more functions also.
Kind regards.
Maybe you are looking for
-
Compressor 4.2 deploys files 4 x larger than 3 compressor
Hey all,. I am out a clip simple talking head which lasts 2 minutes, and I am completely at a loss as to why the difference. Original file is H264, cut in FCPX. I tried to generate a master file and send it to the compressor option, and both give me
-
ReadyShare permissions on WNDR4300
On my laptop which is HP Envy M7 with Win 10 64 bit on which I am the administrator. Network drive ReadyShare was recognized without problems. However, the files are read-only and I can't change or remove the read only flag. When I tried to delete a
-
How to copy a wav file of windows media player on my desktop?
How to copy a wav file of windows media player on my desktop?
-
Every time I send and send it goes to my Outbox. I deleted all my messages in the Outbox and rebooted but still this problem.
-
Key signature required information
Hi all I'm working on BlackBerry. I have not much idea about signing keys. I fill out the form and pay 20USD for Signature keys. Hope they will send in a few days. In fact, I work as a team so we all members of the team can use signature keys on our