LasetJet Pro M475dn: Impossible to scan over the network after upgrade to El Capitan

After that I upgraded to El Capitan I no longer use HP Scan or HP Easy Scan to scan the network more. I can print to the printer, but analysis always results in the page being pulled by the document feeder, but applications just to lock-up without the document showing. Everything worked fine on Yosemite.

I found a workaround solution that once worked before after a update of Mac OS X (but had to change the name of file, much like the original file has disappeared). Just download the next file on HP (no matter that it is not for your printer; it's not mine either (OfficeJet Pro L7680) but it works).

FTP://FTP.HP.com/pub//softlib/software12/COL51752/OJ-125213-3/HP-inkjet-SW-OSX-Mavericks_v12.34.37.dmg

Disable SIP for this installation and when you run the installation program (do not know if you need to do, but I did anyway). To do this, the instructions are here:

https://forums.developer.Apple.com/thread/3981

When you run the Setup program, make sure you hold the CTRL key when you right-click on it, then click Open in the menu.

Run the Setup program. Be sure to select the HP scanning software and install it. When you get to the configuration of the printer, just skip this step (unless you are using the printer in question). The parser components are what you really want from the printer drivers are already in El Capitan, if you have a HP supported printer. The scanning software will have already installed to the moment you arrive at this screen.

Install the HP Easy Scan on the App Store app (if you get the latest version of the software your front-end). You should be able to run the scanner and scans without restart. I don't know if it will work for everyone, but certainly, it worked for me and keep me until they find what went wrong in El Capitan to disable scanning and scanning capabilities.

SIP turn on again so that your Mac is better protected. We should all work after that. After doing the above, I found that I was able to not only use the HP software, I was able to use Image Capture, preview, etc, to get images from the scanner. Your mileage may vary, but if all goes well it will work again for you all.

Tags: HP Printers

Similar Questions

  • HP ENVY 4520: HP Envy 4520 - refusing to Scan over the network

    Hello

    We currently have a HP Envy 4520, which print, however don't scan or copy over the network.

    I have downloaded and run the HP doctor tool, but it crashes to Windows Image Acquisition (WIA). This article has been read a few topics here, I restarted the following three services:

    1. Remote procedure call (RPC)
    2. Shell Hardwarew
    3. Windows Image Acquisition (WIA)

    Once I finished at the outset what precedes, the scanner worked as expected. However after a reboot - the problem is more severe. The doctor program crashes at the same section and restart services fail to achieve something.

    All software and drivers are up-to-date by using what has been provided on the HP website.

    The error messages vary as well, for example Adobe, I see "fatal error. Commissioning stopped. "

    Hi @DocCottle

    Thanks for your response!

    I managed to solve the problem. After you reset the windows service, you must then make sure that the printer restarts too! I didn't do that. Once done all is well!

  • Import old box Inbox and sent in the Mail after upgrading to El Capitan

    There has been much discussion about the e-mails lost after upgrade to El Capitan, but I have not seen this particular question.

    I discovered that, like many others, all emails in my Inbox and in my sent folder to leave before the upgrade had disappeared. The issue has not affected the emails I had moved to folders.

    Open the mail library file (in the Finder, hold down the Option key selecting go to the top menu and the library appears), I discovered that Mail was created a new file V2, account, while the old one, V3 (created in 2013), sitting next to her. Go by the size files, it seems fair to assume that the V3 still contains my "lost" emails

    So, I don't know if the bug is that a new V2 should have been created at all, or is it a sync error, or something else. What I know is that when I try to import the items from Inbox and sent from the V3, I get an error message telling me that no mbox valid was found. This is patently false.

    I also tried to copy on an external hard drive, gave them a different name, but even then I couldn't import them. Reconstruction did not help either.

    Anyone able to help? I have a few crucial e-mails out there, and I try to avoid the upgrade...

    Address postal (El Capitan): import or export the mailboxes

  • LaserJet MFP M177fw Pro: M177fw can scan over the network

    Hello

    I would like to know if the printer permissions 'M177fw' to use the scanner to a pc connected via LAN. (based on analysis of the computer or send the scan from the printer to a network folder)

    I found this information on the manual.

    Thank you

    Hey @mariwf,

    Yes, if you have the printer connected to your wireless network, you can scan all the same that you would be using a USB connection. You don't have to use the built-in Web server, you can open and use the HP scanning software.

  • Not able to scan with the preview after upgrade from Mac OS Sierra...

    After upgrading to Mac OS Sierra. I'm unable to use the preview to scan.  Before this upgrade, it worked fine.  The HP scanner software does NOT work something like OS 10.8 or 10.9.  Preview worked perfectly so far.  If anyone knows how to solve this problem, your contribution will be greatly appreciated.  Thanks in advance.

    Have you tried scanning with Capture of Image instead? It worked for me.

  • I'll always be able to run the opening after upgrade to El Capitan?

    I want to install Office 2016 on my MacBook Pro which is running 10.9.5 - it asks me to upgrade to El Capitan. I'm afraid that Aperture will not work more.

    On El Capitan, you need opening 3.6.  You are currently running opening 3.5.1 or an older version?

    Before you upgrade to el Capitan make a full time Machine backup of you system so that you can return to the Mavericks, if need to be.  (see: OS X El Capitan: revert to a previous version of OS X)

    And check if you are able to update to 3.6 opening.  Check before upgrade you to El Capitan.

    • Open the App Store and sing in your account in the Store with your AppleID menu.
    • The fourth "shopping" tab  Figure opening it to your purchase history?  If so, you can update opening 3.6, once you have upgraded to El Capitan.  If the opening is absent from your purchase history, you will only be able to update with the help of the PapSTore supported.

    See this user Tip: update to Aperture 3.6 after the release of Photos

    https://discussions.Apple.com/docs/doc-8402

    3.6 the opening is the latest version of Aperture and the only one to run on El Capitan.

    There are more and more questions with an opening. Opening 3.6 is running on El Capitan, but keep accumulating the minor bugs.

    • When brushing the adjustments, the position may be a bit off, a pixel or so.
    • The thumbnails in the list view are backwards.  Re: opening and El Capitan OSX
    • If you add a curves adjustment, adjustment to straighten will be not visible in the exported images. See: right
    • The link to the plug-ins page work is no longer in the opening menu, but it's the same for all versions.

    And you can order are no longer produced printouts of Aperture. Apple has stopped completely, the support for Aperture print products in any version of Aperture.

  • Attack of the kernel after upgrading to El Capitan

    I need help and fashionable of despair. I get an error Kernel attack (such as published in full below) and can rule out a hardware malfunction. My situation is unique in the sense that I had a MacBook 2011 Pro - I upgraded to El Capitan and began to get the kernel attacks every twenty minutes or more. I ended up doing a restore of my Time Machine backup (which was of Yosemite), and the problem stopped. The interesting thing is that the time machine backup, while in Yosemite, never came back save El Capitan.

    I bought a new MacBook Pro from Apple and restored my backup time computer machine and then upgraded to El Capitan backup, as he showed in my remarkable applications. Although less frequent, the attacks returned core. I got on the phone with Apple and we did a cover of the OSX drive on two of my computers. I get still kernel tackles. It's very frustrating and any help would be greatly appreciated.

    Anonymous UUID: 9A1431EE-FA42-9921-CDE2-2604EFA46733

    Wed Mar 30 20:12:16 2016

    Panic report *.

    panic (the appellant 2 cpu 0xffffff8006b1fff0): "link element invalid queue for 0xffffff8043382000: 0xffffff80433ace40 next next-> prev 0 prev prev-> next 0x38"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.40.184/osfmk/kern/queu e.h:245 0xffffff80417789c8.

    Backtrace (2 CPU), Frame: Return address

    0xffffff91f4cbbcb0: 0xffffff8006adab12

    0xffffff91f4cbbd30: 0xffffff8006b1fff0

    0xffffff91f4cbbd70: 0xffffff8006b1c7e2

    0xffffff91f4cbbe50: 0xffffff8006ae4d59

    0xffffff91f4cbbe70: 0xffffff7f8723d077

    0xffffff91f4cbbea0: 0xffffff7f8723de29

    0xffffff91f4cbbf00: 0xffffff8006b0f1ea

    0xffffff91f4cbbfb0: 0xffffff8006bc8e27

    Extensions of core in backtrace:

    com.symantec.kext.internetSecurity (5.4f7) [852B8212-F3BE-D5F6-87F6-84B8D6517550] @0xffffff7f8723c000-> 0xffffff7f8724afff

    Corresponding to the current thread BSD process name: kernel_task

    Mac OS version:

    15E65

    Kernel version:

    15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64

    Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839

    Slide kernel: 0 x 0000000006800000

    Text of core base: 0xffffff8006a00000

    Text __HIB base: 0xffffff8006900000

    Name of system model: MacBookPro12, 1 (Mac-E43C1C25D4880AD6)

    Availability of the system in nanoseconds: 7646056019303

    last load kext to 4181530331876: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f89655000 size 32768)

    Finally unloaded kext to 137779832539: com.apple.driver.AppleIntelLpssI2C 2.0.60 (addr 0xffffff7f88ed4000 size 40960)

    kexts responsible:

    com Symantec.kext.PF 5.7.1f4

    com.symantec.kext.internetSecurity 5.4f7

    com.apple.iokit.IOBluetoothUSBDFU 4.4.4f4

    com Apple.filesystems.afpfs 11.0

    com Apple.NKE.asp - tcp 8.0.0

    com Apple.filesystems.autofs 3.0

    com.apple.driver.AudioAUUC 1.70

    com Apple.Driver.pmtelemetry 1

    com.apple.iokit.IOUserEthernet 1.0.1

    com.apple.iokit.IOBluetoothSerialManager 4.4.4f4

    com.apple.driver.ApplePlatformEnabler 2.6.0d0

    com.apple.driver.AGPM 110.21.18

    com.apple.driver.X86PlatformShim 1.0.0

    com.apple.Dont_Steal_Mac_OS_X 7.0.0

    com.apple.driver.AppleHDA 274.7

    com.apple.driver.AppleLPC 3.1

    com.apple.driver.AppleOSXWatchdog 1

    com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

    com.apple.driver.AppleUpstreamUserClient 3.6.1

    com.apple.driver.AppleIntelBDWGraphics 10.1.4

    com.apple.driver.AppleThunderboltIP 3.0.8

    com.apple.driver.AppleBacklight 170.8.9

    com.apple.driver.AppleHV 1

    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4

    com.apple.driver.AppleSMCLMU 208

    com.apple.driver.AppleCameraInterface 5.46.0

    com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

    com.apple.driver.AppleMCCSControl 1.2.13

    com.apple.driver.AppleIntelBDWGraphicsFramebuffer 10.1.4

    com.apple.driver.AppleUSBCardReader 3.7.1

    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

    com.apple.BootCache 38

    2.8.5 com.apple.iokit.IOAHCIBlockStorage

    com.apple.driver.AppleAHCIPort 3.1.8

    com.apple.driver.AppleTopCaseHIDEventDriver 86

    com.apple.driver.AirPort.Brcm4360 1040.1.1a6

    com.apple.driver.AppleRTC 2.0

    com.apple.driver.AppleHPET 1.8

    com.apple.driver.AppleSmartBatteryManager 161.0.0

    com.apple.driver.AppleACPIButtons 4.0

    com.apple.driver.AppleSMBIOS 2.1

    com.apple.driver.AppleACPIEC 4.0

    com.apple.driver.AppleAPIC 1.7

    com Apple.NKE.applicationfirewall 163

    com Apple.Security.Quarantine 3

    com.apple.security.TMSafetyNet 8

    com.apple.driver.AppleXsanScheme 3

    com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

    com Apple.Driver.USB.cdc 5.0.0

    com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

    com.apple.security.SecureRemotePassword 1.0

    com Apple.kext.Triggers 1.0

    com.apple.driver.DspFuncLib 274.7

    com.apple.kext.OSvKernDSPLib 525

    com.apple.driver.AppleIntelLpssUARTCommon 2.0.60

    com.apple.driver.AppleGraphicsControl 3.12.6

    com.apple.iokit.IOSurface 108.2.1

    com.apple.driver.CoreCaptureResponder 1

    com.apple.driver.AppleBacklightExpert 1.1.0

    com.apple.iokit.IONDRVSupport 2.4.1

    com.apple.driver.AppleHDAController 274.7

    com.apple.iokit.IOHDAFamily 274.7

    com.apple.iokit.IOAudioFamily 204.3

    com.apple.vecLib.kext 1.2.0

    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4

    com.apple.iokit.IOBluetoothFamily 4.4.4f4

    com.apple.iokit.IOSerialFamily 11

    com.apple.driver.X86PlatformPlugin 1.0.0

    com.apple.driver.IOPlatformPluginFamily 6.0.0d7

    com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

    com.apple.driver.AppleSMC 3.1.9

    com.apple.driver.AppleSMBusController 1.0.14d1

    com.apple.AppleGraphicsDeviceControl 3.12.6

    com.apple.iokit.IOAcceleratorFamily2 205.3

    com.apple.iokit.IOGraphicsFamily 2.4.1

    com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

    com.apple.iokit.IOUSBMassStorageDriver 1.0.0

    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

    com.Apple.Driver.USB.Networking 5.0.0

    com.apple.driver.CoreStorage 517.20.1

    com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

    com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

    com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

    com.apple.iokit.IOAHCIFamily 2.8.1

    com.apple.driver.AppleHIDKeyboard 181

    com.apple.driver.AppleMultitouchDriver 304.10.2

    com.apple.driver.AppleHIDTransport 5

    com.apple.driver.AppleHSSPIHIDDriver 43

    com.apple.driver.AppleThunderboltNHI 4.0.4

    com.apple.iokit.IOThunderboltFamily 6.0.2

    com.apple.iokit.IO80211Family 1110.26

    com.apple.driver.mDNSOffloadUserClient 1.0.1b8

    com.apple.iokit.IONetworkingFamily 3.2

    com Apple.Driver.corecapture 1.0.4

    com.apple.driver.AppleHSSPISupport 43

    com.apple.driver.AppleIntelLpssSpiController 2.0.60

    com.apple.driver.AppleIntelLpssGspi 2.0.60

    com.apple.driver.AppleIntelLpssDmac 2.0.60

    com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

    com.apple.driver.usb.AppleUSBXHCI 1.0.1

    com.apple.iokit.IOUSBFamily 900.4.1

    com.apple.iokit.IOUSBHostFamily 1.0.1

    com.apple.driver.AppleUSBHostMergeProperties 1.0.1

    com.apple.driver.AppleEFINVRAM 2.0

    com.apple.iokit.IOHIDFamily 2.0.0

    com.apple.driver.AppleEFIRuntime 2.0

    com.apple.iokit.IOSMBusFamily 1.1

    com Apple.Security.sandbox 300.0

    com.apple.kext.AppleMatch 1.0.0d1

    com.apple.driver.AppleKeyStore 2

    com.apple.driver.AppleMobileFileIntegrity 1.0.5

    com.apple.driver.AppleCredentialManager 1.0

    com.apple.driver.DiskImages 417.2

    com.apple.iokit.IOStorageFamily 2.1

    com.apple.iokit.IOReportFamily 31

    com.apple.driver.AppleFDEKeyStore 28.30

    com.apple.driver.AppleACPIPlatform 4.0

    com.apple.iokit.IOPCIFamily 2.9

    com.apple.iokit.IOACPIFamily 1.4

    com.apple.kec.Libm 1

    com Apple.KEC.pthread 1

    com Apple.KEC.corecrypto 1.0

    Model: MacBookPro12, 1, MBP121.0167.B16 of BootROM, 2 processors, Intel Core i7, 3.1 GHz, 16 GB, MSC 2.28f7

    Graphics card: Intel Graphics Iris 6100 6100, integrated Intel Iris graphics card

    Memory module: DIMM0/0, 8 GB DDR3, BANK 1867 MHz, 0x02FE, 0x4544464232333241314D412D4A442D460000

    Memory module: DIMM0/1, 8 GB DDR3, BANK 1867 MHz, 0x02FE, 0x4544464232333241314D412D4A442D460000

    Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 133), Broadcom BCM43xx 1.0 (7.21.95.175.1a6)

    Bluetooth: Version 4.4.4f4 17685, 3 services, 27 aircraft, 1 incoming serial ports

    Network service: Wi - Fi, AirPort, en0

    Serial ATA Device: APPLE SSD SM1024G, 1 TB

    USB device: USB 3.0 Bus

    USB Device: Card reader

    USB Device: USB Bluetooth host controller

    Bus crush: MacBook Pro, Apple Inc., 27.1

    Please remove the Norton/Symantec products in accordance with these instructions. If you have a different version of the product, the steps may be different. If you have tried to remove it by dragging an application to the trash, reinstall it and finish the job.

    Back up all data before making any changes. Never install any product "anti-virus" or "anti-malware" again.

  • Unable to connect to the network after upgrade to 9.3.1

    I upgraded my iPod Touch 5th gen 9.3.1 and he "lost" the network password.  After many attempts to re - enter, I said the iPod 'forget' the network and tried again and again... Same result: "Incorrect password" - which it is not, as I checked directly with the modem.  Any suggestions?

    Take a look at this Apple Support article:

    https://support.Apple.com/en-us/HT204051

    Reset your network settings.

    Settings - general - reset - reset the network settings

    Reset your device. This will not erase your data stored on the phone.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

  • Satellite Pro A60 failed to connect to the network after the fashion watch

    Satellite Pro A60 running XP Home.

    When I close the lid it goes mode 5000mAh as set upwards. When I lift the lid, I find that I have to restart to re-establish the connection to the internet through the wireless router. When this happens other computers using the same router not disconnected.

    I've heard talk about this but I got lucky and on my Satellite WIFI connection works after minutes again. Have you tried to deactivate and activate the WLAN using FN + F8 key combination?

    Maybe after short toggle the WiFi works again.

  • Solaris 10 VM loses the network after upgrade tools

    I have a Solaris 10 VM and hit the following problem.

    Solaris 10 after VMware tools install and reboot:

    Lost network device driver module:

    Network device quick vmxnet comments:

    Jan 14 07:37:23 mt-igl-t9 genunix: / kernel/d rv/amd64/vmxnet3s: undefined symbol

    Jan 14 07:37:23 mt-igl-t9 genunix: "mac_lso_get."

    Jan 14 07:37:23 mt-igl-t9 genunix: WARNING: mod_load: could not load module 'vmxnet 3s. "

    VMware Tools 10.0.0 build-3000743

    VMware Tools 10.0.5 build-3227872

    Hello

    I have the same exact issues with Solaris 10, X 86

    The problem has been resolved by following the steps mentioned below.

    Step 1

    Re-install Vmware tools VMware Tools version 9.0.0 build-782409

    Step-2

    Restart the server

    Step-3

    vmxnet and vmxnet3s files take backup

    for solaris servers

    root@solaristemp # cd/kernel/drv/amd64.

    root@solaristemp # cp vmxnetbck vmxnet

    root@solaristemp # cp vmxnet3s vmxnet3sbck

    Step-4

    Re-install VMware Tools 10.0.0 build-3000743

    Step-5

    Restart the server

    Step-6

    We copy the file backup instead, we receive re version 10 deamon.

    for solaris servers

    root@solaristemp # cd/kernel/drv/amd64.

    root@solaristemp # cp vmxnetbck vmxnet

    root@solaristemp # cp vmxnet3sbck vmxnet3s

    Step-7

    You will find that VMware tools installed, but working on the guest.

    Step-8

    root@solaristemp # /usr/bin/vmware-config-tools.pl

    Step-9

    Restart the server

    Once finished, meet us without any problem.

    Although not yet produce a legal solution we observed not another solution.

    Thank you.

    Best regards.

  • HP 2520HC: install the software of the printer over the network

    Hello

    I use the HP 2520HC series at the office. I use a network connection.

    Printing works fine, however I want to be able to scan as well. I downloaded the printing software, but the only option I choose, connect via USB? The printer is connected to another PC, so this isn't an option.

    Please help me.

    Hello

    such a USB printer allow only all features on a directly connected USB computer.

    Sharing a printer over the network allows sharing of a printer, Windows don't offer any scanner, the sharing feature.

    You can print from another PC to a shared printer, you will not be able to analyze such, to analyze the use of the computer connected directly to your printer via a USB port.

    Kind regards

    Shlomi

  • RICOH Aficio 1045 Pcl 6 cannot be contacted over the network

    I am running Windows 7 Pro 64-bit and I try to install a printer multifunction Ricoh Aficio 1045 on a network. I was able to do a typical "add a printer" and everything seemed fine, but I can't print. When I run the troubleshooting printer I get the following error 'printer RICOH Aficio 1045 Pcl 6 cannot be contacted over the network. He said to contact my system administrator. I don't have a system administrator. I'm open to any ideas on this one.

    Printer driver from the site Web RICOH (PLC 6 pilot - worm. 3.1.0.0 r31047en)

    Intel i7 - 3770 k @3. 5 GHz (8cpu)

    16384 MB of ram

    AMD (ATI) V over-pants 725 MB graphics card

    I actually solved myself yesterday.  I installed the printer using its ip address and the PL5e driver and it worked fine.  Thank you. .

  • Why convert? What is the advantage? Why convert it before you send the data over the network?

    Hello everyone.

    I have a question quite simple and intuitive. Yet Google does not seam to get the answer.

    Basically, I'm curious why should we catalogued something? It seems to me that it's just a little like a "band-aid" for editing data in conversion to a new data type, when it is not properly declared with an appropriate data type. What would be the advantage of this?

    Furthermore, I see a lot of data type casting to U8 programs before sending it over the network. Various reviews say it's for speed, but I can't understand how it improves speed. The same amount of data is still sent, just in a different type of data. This is overcoming a limitation of the network. The network somehow send smaller data types faster?

    I've been curious about this for a while and have yet to find an answer. Any help is appreciated.

    Thank you
    Taylor S. Amarel

    tsa256 wrote:

    Basically, I'm curious why should we catalogued something? It seems to me that it's just a little like a "band-aid" for editing data in conversion to a new data type, when it is not properly declared with an appropriate data type. What would be the advantage of this?

    It really depends on the specific situations.

    For example, some functions explicitly require certain types of data as inputs if they are not polymorphic.

    This means that if you do not convert the data yourself and you will see a red dot forced LabVIEW will do it for you.

    As to why the data was not the correct data type in the first place, it is sometimes inevitable.

    A few examples

    -What happens if you just read a text file as a long string.

    If there is digital data in this file, you need to analyze, and then convert it to a usable type (int, sgl, dbl, etc.)

    -you are given a 3rd part VI, dll, etc. that returns a numeric value as a double, but you need the value to I8.

    You cannot change the output of the function given to you, so what you can do to remedy this situation is cataloged data.

    tsa256 wrote:

    Furthermore, I see a lot of data type casting to U8 programs before sending it over the network. Various reviews say it's for speed, but I can't understand how it improves speed. The same amount of data is still sent, just in a different type of data. This is overcoming a limitation of the network. The network somehow send smaller data types faster?

    Somehow, this is my first response, but in a more general sense.

    Many functions down to the level of the OS run in binary.

    If your data are not already in binary, the sending computer must convert it to binary, and then send it, have the receiving computer convert in return.

    Two conversions on each side of the transmission add unnecessary delays.

  • LaserJet P2055DN - do not print over the network

    Configure the printer last night as a network printer (which replaces a former 2300dn LJ). It would not print a test page. To verify that the printer was good, I have loaded the drivers on my laptop and connected via usb.  Was able to print a page of test via USB.  Disconnected usb and reconnected power cable. Released and reset the ip address.  Verified the ip address in scathing of the host.   When I ping the printer I usually lose half of the packages.  There are two other HP printers on the network, a P2015dn and a color 2605dn LJ. Ping their IP back to 100% with a ttl = 255. Ping the p2055 produced 4 packets sent, 2 packets received, 2 lost packets, ttl = 64 2 returns.  I changed the printer cables and exchanged the network switch ports (verified the network switch ports by printing to the LJ 2605) with the same result. I can't get the internal web server to mount, or it partially displays or combinations of these.  If this was the old style removable print server as in my lj2300, I could swap out, but it's not like I can do with this model.  When I send a test page to the printer, it displays "printing", the green light on top flashes, the activity on the network card light flashes, but nothing happens. Finally, I get a «this document failed to print "notification on the host, but the printer still says 'printing' and the lights are still flashing.»  Anyone have any ideas?  I think I'm looking at a bad network/print the server maps in the P2055.

    I also had problems printing over the network to the hp p2055dn. There was no problem via USB printing. All the network settings were ok. Can ping, etc...

    Number of days of bickering, finally found that the Config.Security Network should be reset on the physical control of the printer Panel.

    Press Ok on the Control Panel printer--> press down arrow, you get to Setup Menu Network Config--> press Ok--> a number of arrows down you get to Config network. Security--> press Ok--> you have two options - keep or reset--> choose Reset... Network printing should work fine.

  • I can restore the backup made by WHS v1. PP3 the WHS 2011? Or do I need to copy the files over the network of old serevr again?

    WHS backup

    You just bought a new WHS 2011. Question, can I restore the backup made by WHS v1. PP3 the WHS 2011?  Or do I need to copy the files over the network of old serevr again?

    Hello

    Because the problem is with Windows Home Server, I recommend you post this question in the Forums Windows Home Server.

Maybe you are looking for