Last FEW imported

Similar Questions

• For the last few weeks, after that I closed 19.0 FF, I can't open it. I resorted to having to re - install FF each time so that it can open. What should do?

  For the last few weeks, whenever I close Firefox 18 (and more recently 19.0), I can't reopen the browser again. The application runs as if it is going to open, then stops and sits there. I had to resort to the re - install the browser every time now, very irritating. He remembers my tabs as they had been, that I want to. I used to open up to 40-50 tabs, but now made an effort to keep them below 20, thinking that it would help work more optimally. I'm tired of re - install the browser all the time. What should I do? Thank you

  When this happens, check the Windows Task Manager to see if there is a hidden window or the firefox.exe process is at a standstill?

  To open the Windows Task Manager, press Ctrl + Shift + Esc

  On the Applications tab, look for any window with the icon of Firefox. See something wrong here? In another thread, users have reported finding what seems to be a rogue process. If you find something, try to select and killing using end task.

  Under the processes tab, look for firefox.exe. According to the displayed columns, you can often see that the program is reading, writing, communicate or simply sitting there, doing nothing. If you have allowed time to stop Firefox and it crashes, you can select firefox.exe and click on end process.

  After that, Firefox expected to start normally.

  Please see this article for troubleshooting suggestions for when Firefox crashes out. https://support.Mozilla.org/en-us/KB/Firefox-hangs-or-not-responding#w_firefox-hangs-when-you-quit-it

  A little luck?

• Loading error when you try to load the Halo 2 "files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory.

  Original title: load error when you try to load Halo 2

  People at Microsoft, I have a problem trying to load Halo 2 on my dv7 Paviliaon with Vista and the 2.8 GB Intel Centrino 2 processor. When I try and load the game, I get and error stating: "the files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory. "It bothered me for several reasons. One: the disc that I use is an original disc out of the box so hsould have no problem. Two: the game has been loaded previously on the same computer without apparent problem at the time. It has been deleted (don't remember why) and when I tried to reinstall, the error came. Three: I did as recommended and updated all programs and drivers, nothing works. So my question is, how do I reinstall Halo 2 and what this problem will arise if I decide to buy and load Halo 3?

  Thank you for your time in advance.

  Hello

  As you are facing problems with Halo 2, I suggest you to refer the link for better support:

  http://forums.haloonwindowsvista.com/forums/

• Help please! I using Muse (the free trial version) very well since last week, but the last few times I tried to use it, it comes back with ' TypeError: Error #1009 pouvez anyonve tried to use it, it comes back with ' error can all

  Help please! I using Muse (the free trial version) very well since last week, but the last few times I tried to use it, it comes back with ' TypeError: Error #1009 pouvez anyonve tried to use it, it comes back with ' error can someone help me figure out what the problem... I have a few days I really help neee what the problem is... I have a deadline in a few days so I really need! Thank you

  

  Restart your Mac. The OSX Drag Manager got in a bad state. The only way to reset it is to restart your computer.

• The product I bought doesn't work! I need help and I was stuck in your 'contact us loop' for the last few days and I'm frustrated. How can I contact you for help!

  The product I bought doesn't work! I need help and I was stuck in your 'contact us loop' for the last few days and I'm frustrated. How can I contact you for help!

  Probably the best place to start is the right forum for your product. This is the forum for Distiller Server, a product used by corporations long dead, and probably not what you have. If you can't find the right forum, please let us know the FULL name of what you paid for (Please check your invoice, as Adobe have a lot of similar products), and we may be able to direct you. Good luck!

• the last few XP drivers? Dv5-1110eo

  After a good helper of melanchete, I now Dualboot with Vista and XP on a DV5-1110eo. (amd athlon 64 x 2, radeon hd 3450).

  And after reading a lot of discussion, I have now made this:

  has managed the drivers installed:
  * Lan drivers (realtek)
  * Wifi (atheros wireless network)
  * synaptics touchpad
  * realtek/jmicron card reader
  * webcam
  * Audio Idt

  success not not already:
  HP Quick Launch buttons (they work, but when the volume up/down, I scroll all the bars on the screen indicating how many volume here is)
  any suggestions what version I could try?

  Location:
  * graphics drivers! :-( (tried to download XP drivers Ati.com, Ati Catalyst, but during the installation, I get: "Setup did not find a driver compatible with your current hardware or operating system).
  * IDT audio HD ("as written above, I hear, but only of IDT audio", on vista, I get both "idt audio" and "idt high definition audio or something) purchases the difference?
  * Peripheral footprint (really NOT important at all, but if someone have any suggestions...)
  * bluetooth (NOT important at all)

  So I went to 12 yellow unidentified elements in the Device Manager to 4. Now, I have this "idt high definition audio-buss", graphics card (vga) and 2 unknown.

  One last question: is it possible to manage the power of the CPU? Like to go on half or full speed or max battery and so on?

  Software HP Quick Launch makes the buttons work_HP Quick Touch software is on display on the screen. Some versions of Vista it will install on XP while others do not.

  To install the ATI drivers on your laptop, you need a modded version:

  http://www.Raymond.CC/blog/archives/2008/02/04/how-to-install-latest-ATI-or-NVIDIA-drivers-on-laptop/

  http://www.Gaj-it.com/714/how-to-get-the-latest-ATI-drivers-on-your-laptop/

  Message edited by CherylG on 06/05/2009 21:18

• My favorites have all disappeared with the last update that was installed within the last few days. There is none under the bookmarks icon.

  I had a long list of bookmarks, which was important to me. They are gone from the list of bookmarks. Troubleshooting Tips did not work for me.
  Firefox 32.0.2
  MacBook Air, all software up to date

  These can not get your data back, but will help in the future.

  These modules can be a great help for the backup and restoration of Firefox

  FEBE (Firefox environment Backup Extension) {web link}
  FEBE you can quickly and easily backup your
  Extensions Firefox, history, passwords and more.
  Indeed, it is more than just backup - it will actually rebuild
  your saved individually into installable as files.
  It will also make backup of the files you choose.

  OPIE {web link}
  Import/export extension preferences

• For the last few days I can not access any site Web of Yahoo.

  I can't access all of Yahoo Web site. I have no problem with other sites. I have the latest version of Firefox and Java. The problem is not just with the mail. I can't access any yahoo site although my connection is recognized. Each site to yahoo, I get the message "error encountered processing your last request. This site is currently not available. (Error code 603). Try again later. "I tried to restore the system to an earlier date, delete all cookies, empty cache and analysis of viruses and other malware." Nothing helps. Is there a conflict with the latest Firefox, version 31?

  Hello, please try to reset firefox and see if that can solve the problem...

• For the last few weeks, firefox does not open on my computer. Internet explore and Safari opened on the web without problem. I have a Windows 7 computer.

  I don't know whether or not this began after an update.
  Thanks for your help.

  Joe G

  Hi jgorve.

  Looks like it may be better if you got a new start by uninstalling the current version and upgrade to the latest version of Firefox by following these steps:

  • Get the latest version: http://www.mozilla.org/en-US/firefox/new/
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.
  • Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  Hope that helps!

• How can I make my garbage can show me the last few files that I just sent there?

  How can I get my recycle bin to display only the files that I've deleted today?

  Assuming that you have already emptied from the Recycle Bin, go in the trash finder window. Click on the pinion in the menu with a gray background to the top of the window. Move your mouse over restructure by, and then click date added. Then, after that, in this same area to the left of the pinion their should be four options to display side by side. Click on the left with the four squares. This should show you what you deleted every day (for example yesterday, today, last 7 days etc.) Look under the tab today and you should find what you deleted today.

  Hope this has helped

  H

• In the last few days my xt720 run hot and the battery to last for only 4 hours

  I don't know what happened to my XT720 but since 2 days my phone is running more hot than usual in the back between xeon flash and plate "xeon 8.0.

  I think it should be the domain of the CPU

  

  I tried to remove the battery several times, but it does not help

  Now, I have disabled all the synchronizations and data exchange, off WIFI and basic GPS (but I used to have my phone with this setting turned on for several weeks) and still no improvement.

  The phone is good work and looks like there is just an application of high power of the CPU for something.

  I would try a reset of the device factory to check if some sw or fw settings has been the cause of this new bad behavior.

  Do you think that it's worth to try it, or is it better to get in touch with Motorola customer service to request a check (my phone has only 3.5 months of life)

  Thank you

  Marco

  Resolved after a factory reset!

  In fact, I would suggest that a reset from factory to everyone feels that the battery of the XT720 wouldn't last as expected.

  I have my phone unplugged and mode intelligence (with active Gmail) from 9 h 42 m and the battery is still at 70%

  This is a very positive behavior from the last days where my battery low runned after about 4 h.

  It is also a good way to assess the potential of the stand-by battery and could be a way to compare the real potential of vanilla by a custom filter (widget, screensaver, desktop direct current) and think that if it is worth to keep the customization and the battery life let go.

  See you soon

• Malicious software removal tool update problems the last few months. Suspended for a very long time. Vista Home Premium 32 bit SP2

  Hello

  The last 3 months when the download and installation of my updates for Windows Vista, it gets stuck for hours on the malicious software removal tool. I have to cancel it. Restart the computer and reinstall. Then he moved very well and quickly according to historical updates. Last month, it was really difficult to cancell it well. He finally got through it. Here is a little history on my machine. I'm very very well with this computer. Each week, I do disk Cleanup, then defrag with diskeeper, virus scan with Microsoft Security Essentials. And every six months, I run a very large disk check and I said to correct errors and try to fix bad sectors. More than 3 years, I only had 2 minor bluescreens. I always make sure I have all my products Microsoft put updated. When I first got this computer I had a guy I.T. (a neighbor) out of the box and clean all the useless garbage out of it and it partitioned the hard drive. More than 3 years, he managed as a champion. Always very fast and all.

  I hope that I'm not the only person having problems with this. Just start with the month of June, then July, then August.

  P.S. I have 2 laptops running XP sp3, one is 9 years old and the other is 11 years old, he had 2000 top PRO, but I just put XP sp3 on it last month. They run too much like fields. I take good care of my computers with a little help from my friend IT. They have the same programs as this one and I do the same things to them, but they do not have this same problem with the release of the MSRT tool. Which leads me to think that it is specific to Vista only, I have a Windows 7 computer yet, so I can't speak for seven.

  Any suggestions or ideas? We are scratching our heads on this one.

  Thank you in advance for your time and help

  Tim Kerr

  Your misguided use of registry cleaners could have caused this behavior! If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~

  Your use of Revo Uninstaller and the foregoing notwithstanding, applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open IE (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  5. restart & test (i.e. the or shortly after seven 14-10 when the next MRT is scheduled to be released).

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I need help burning a cd from Director of windows. When it burns, it leaves aside the last few photos on the cd.

  All the music Burns fine on the cd, but for some reason, simply of turns black towards the end of the program, leaving aside the last pictures of the film.  I need help!

  You may add too many files on the CD.
  And a project too complex can cause problems...
  too many transitions, effects, splitting, etc...

  And... It may be useful if you are going to... Tools / Options /.
  ... Compatibility tab and left click to restore all
  Default button.

  One or more files also may have compatibility
  questions:

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  Try to save the project in the. WMV video format
  in a folder on your hard drive and then burn the
  . File WMV to CD using other software.

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  See the following article:

  Movie Maker - video recording on a CD - R, CD - RW.
  http://www.windowsmoviemakers.NET/tutorials/HowToSaveCDRom.aspx

  The free software CDBurnerXP allows you to burn your video
  file on a data CD.

  CDBurnerXP
  http://CDBurnerXP.se/
  (Yes, it works on XP, Vista, 7)

  CDBurnerXP - create data disc
  http://CDBurnerXP.se/help/data/compiledata

  And... If you decide to create a video DVD... the
  following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.Digital-Digest.com/software/download.php?sid=1246&SSID=0&did=2
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• In the last few days my Montior Win7 changed icons just background windows 7 UK

  Original title: in the last days my Win7 Montior has changed to just the Uni background icons. And all I can do is keep selecting the monitor on and outside them to restore.

  Question: In the last days my Montior Win7 has changed to just the Uni background icons. And all I can do is keep selecting the monitor on and outside them to restore.

  I just use this desktop PC for paying bills online. And the daily updates for Norton Internet Security and M$. It is never longer than the time it takes for a complete analysis of Norton located at 57 minutes. And most of the time he's in 25 minutes or less.

  Any suggestion or help in addition to the purchase of a new monitor? I also noticed today that the system restore was not selected for the readers so I put to my C: drive. Sodoing a Restore Point is not the answer.

  I solved it with a new monitor. A Samsung for $149.99. And he stopped the wireless I received.

  My old laptop computer wifi finder still works well. Think about it so resolved.

  Again once my thanks for the quick response and assistance.

  I just need this resolved quickly because the bills start to arrive.

• Display the last few lines added

  Hello
  
  Could someone help me how to prepare a select statement which show the last 10 added lines? I have the column with DATE format.
  
  Best.

  Hi Best

  SQL > drop table t;

  Deleted table.

  SQL > create table t (t1 date);

  Table created.

  SQL > insert into values (sysdate) t;

  1 line of creation.

  SQL > insert into t values (sysdate + 1);

  1 line of creation.

  SQL > insert into t values (sysdate + 2);

  1 line of creation.

  SQL > insert into t values (sysdate + 3);

  1 line of creation.

  SQL > insert into t values (sysdate + 4);

  1 line of creation.

  SQL > insert into t values (sysdate + 5);

  1 line of creation.

  SQL > insert into t values (sysdate + 7);

  1 line of creation.

  SQL > insert into t values (sysdate + 6);

  1 line of creation.

  SQL > insert into t values (sysdate + 8);

  1 line of creation.

  SQL > insert into t values (sysdate + 9);

  1 line of creation.

  SQL > insert into t values (sysdate + 10);

  1 line of creation.

  SQL > insert into t values (sysdate + 11);

  1 line of creation.

  SQL > insert into t values (sysdate + 12);

  1 line of creation.

  SQL > commit;

  SQL > select * from (select * from (select rownum, t1 from t by t1 desc) where rownum)<=10) order="" by="" t1="">

  ROWNUM T1
  ------ ---------
  6 24 AUGUST 09
  8 25 AUGUST 09
  7 AUGUST 26 09
  9 27 AUGUST 09
  10 28 AUGUST 09
  11 AUGUST 29, 09
  12 30 AUGUST 09
  13 31 AUGUST 09
  14-01 - SEP - 09
  15-02 - SEP - 09

  Please use above written request...

  A P R I T S I N H A