Last good known Configuration - Question and problem

Similar Questions

• Will someone please tell me how to access the last good known Configuration. And how to start up in Mode safe

  GREETINGS TO ALL READERS

  Someone please help me solve the following problems?

  Something inexplicable happened to my computer on January 12, leaving my hard drive in a mess and my computer unstable and leaving the restoration system does not.   However, Reatore system works now, but only today's date.  I can't go back to an earlier date. I need to do because of the unstable behavior of my computer.  System Restore is repairable to instead re - install? If this isn't the case, please tell me how to re - install.

  In addition, NTLDR is missing. Could be the cause of the instability of the computer and the problem with the system restore?   And willl you please tell me how to restore NTLDR.

  Thanking the Good Samaritan (s) in dvance for any help.

  MAY THE FORCE BE WITH YOU ALL.

  Brad
  .

  Hello

  Thank you for your response.

  1. the issue resolved?

  Please get back with the results so we can help you better.

• In the Advanced Options Menu that I used to have a last good known Configuration to select who is gone?

  A while back I had to have my hard drive formatted and windows re-installed.  Advanced options, used to have a selection for the last good known Configuration. This selection is no longer there, but the other options as the safe mode and Boot normally.  This was a result of the hard drive being formatted? I'm more worried if this indicates a problem with the hard drive?

  I've since upgraded to Windows XP, which has the system restore, so I don't know if the last known Configuration Option is necessary.

  Let me be frank.

  This system is an old Windows 2000 upgraded to XP and it is low on RAM (384 MB) and low processor speed ~ 977 Mhz.

  If you are thinking about replacing/upgrading, it would be a wise investment.

  I know how to get emotionally attached to an older system, but one day you just I have to bite the bullet and get something more modern.

  You may he likes not at first and can hate him, but with some time and when you get your new system composed with your exact settings you like, you'll start to it.

  I've got 6 systems here who have bitten the teeth and never before seen power in months, but I can donate or use parts for someone who's biggest thrill in the world and what brings him smile in their face is playing Solitaire on a computer (or a visit to a dog... it's what I do sometimes).

  If you have problems with XP, I can help you with this better than I can, but your system specs are barely minimum for a good system in XP.  You could probably make it work, but it often curse you that you operate.

  That's just my opinion by observation.

• My system still needs last good known Configuration to restart

  How to add the command (last good known Configuration) to the boot.ini file so that the system always recharges automatically with this
  Last good known Configuration and get rid of this problem of rebooting mind almost whenever I boot my system.

  Because it is very difficult to find the real problem, it is very convenient to always start by LKGC for now, so I can use my system until I have find the real reason for the error

• Cannot log on my laptop without hitting F5 (as the starter), F8 and then the last good known Configuration

  When I turn on my laptop, the login page happens, but when I enter my password, it just re-boots. Then, he returned to the login page, where it does the same thing. So, it just goes back to the login page again and again and again. I tried restoring the system repeatedly.

  The only way I can connect on my laptop is by pressing F5 when starting, F8 then, last known good Configuration. I do everytime I turn on my laptop! It is very annoying. If I download anything, it saves it, but whenever I upgrade my web browser, upgrade disappears the next time I turn on my laptop.

  Backup your data and do a Windows factory restore.

  Most laptops and many OEM desktop computers (HP, Sony, etc.) come with a picture of factory restore on a special partition on the hard drive. The factory restore process is normally called by pressing a key of function (such as F11) to start the computer. There will be a message as to what function key press the screen when you start your computer. You can also consult the manual of your computer or the computer mftr.'s site, or contact technical support to learn how to restore your computer if you plant from each computer mftr. He does it differently - sometimes even between models.

  These machines also generally have a utility to create physical recovery disks in case the hard drive needs to be replaced or the factory restore image is somewhat damaged. If you have not created the recovery image recovery physical and/or damaged disks, contact technical support of computer mftr. to order a set of recovery disks. It is normally very expensive, around $20-25. MS - MVP - Elephant Boy computers - don't panic!

• Get the blue screen when you select last good known Configuration

  Original title: screen dlue

  blue screen won't go away after I selected start in the last known good configuration

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  Pouvez be able to get the DMP without crashing files by booting in SafeMode (F8) with option.* *.
  
  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone".
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  (Instructions for XP, Vista, Win 7, Win 8)

• A way to find my previous questions and problem reports?

  Is it possible on this forum to find my previous questions and problem reports? Since viewing a question earlier today, I found the greater PART of the answer and would like to add that I found the question, without waiting for someone else to answer. I can't remember the title I gave to the previous question, or I would use this title in the search for it.

  Information troubleshooting below is most relevant to a previous problem that this question.

  Contributions my link on main page of the forum should display a list of all your job offers.

  See the search in this forum for your username under "posed by".

• re black screen: start: last good known Config, Windows starts normally begins to start and fails

  This screen offers safe mode options that I didn't choose. When I select to start Windows normally the computer starts to boot and I see the Windows Logo, then it switches to the Logo from my computer with 2 different keys of F and when I looked into it and I tried again, I got the black screen again with these options and it keeps cycling.

  I tried F8 and I don't know enough to navigate. Can I get help? My windows disc seems to be broken, so I'll try another disc. I ran it under Configuration now it says: for installation: format the Partition using the NTFS file system. I don't know how to repair Windows on mine.
  The disc seems to be higher my score 1 digit. It is Windows XP Home Edition. The Windows disk that is scratched is not this edition. I do not know what form of Windows is installed in my BONES.
  I move files off my hard drive when this problem occurred and I got a blue screen and the computer began to dump physical memory... I turned off my computer. Recently, I had the memory stick inside, but it starts normally after that I did until this happened, I thought that this can happen because I changed the memory stick... not sure

  Hello

  Are you trying to clean windows install? Do not pass without taking your databackup as format NTFS means it will erase all your data on the disk, you will have:

  Validate windows

  Reinstall windows update

  Install all required software

  Restore your data

  What, exactly, is the problem. Remove first the cd boot pc, at the prompt when it asks for safe mode - select Safe mode, connect to pc using administrator.

  Click Start-> run, type &-> chkdsk /f c :-> OK

  He may ask you to schedule the scan of the drive-> select Y for Yes, restart your computer.

  I hope this helps.

• Profile of Newbie Xcode provision of the question and problem recording peripheral Dev Member Center

  Help!  I am a user of Xcode newbie. Just signed up for a developer account (free version added to my existing Apple ID).   I followed a tutorial to make a few changes to the Apple TV 4. In the tutorials that seem very useful do not have additional info for potential problems as those I seem to face at every turn. As far as google can be useful, it can also be a time suck empty soul.  I have a life to live then all help to speed up the answers to these questions would be greatly appreciated.

  -Launch Xcode → click on create a new project in Xcode → select Application under tvOS → Application unique view, and then click Next. Fact

  - In the product name field, enter a unique name such as KodiAppleTVforYourNameHere (done, but I have a problem I can not find the answer to...), and then click Next → create

  The 'organization' identifier is empty and I do not know what to enter and the tutorial says nothing...

  

  - In the drop-down box team, select your personal team and click the question difficulty to solve problems of commissioning. You will ensure that you are connected to Xcode with a free Apple Developer account. You can learn how to do it using this tutorial.

  I get a "no provisioning profiles found.

  When you click on "solving the problem", I get a pop up saying "no device - create a profile doesn't require" fitted with a registered in space subscribers.

  

  Then I went to the Member Center and can not find the place where to save a device... nor can I find detailed (for a novice like me) instructions on how to do it.  I tried to follow these instructions, but had problems as shown below.

  1. go to Developer.apple.com...

  2. go in the "Member Center". (This is not an option that I see...)

  

  3. go in "Certificates, identifiers & profiles." (Went straight to this...)

  4 Select "Devices" on the left navigation. (nowhere to be found... and am stuck here...)

  

  .... 5. click on the sign "+" to add a device.

  .... 6. enter a name for the device and the UDID.

  .... 7. at the bottom of the page, select continue when you are finished.

  .... 8. at the bottom of the page, choose "Save" to save the new device. Repeat these steps to add up to 100 devices on a regular account.

  These steps seem easy enough, but I continue to find myself in a position that some things I should do just are not there... like the devices section not found in the center of development Member?

  Help or direction would be greatly appreciated.  Thank you!

  Have you ever this resolved? I'm having the same problem.

• Windows does not start. I tried 'start normally', 'Safe Mode' 'last good known... ". "'Safe mode with command prompt. No work.

  Problem detected and windows has been stopped...

  PAGE_FAULT_IN_NONPAGE_AREA

  Technical information:

  STOP: 0 X 00000050 (0X8DF1BA4C, 0X00000000, 0X805E9A54, 0X00000000

  I have not installed new hardware or software in the last 3 weeks. This failure to start the problem started this morning. Computer was working fine last night.

  I have the same problem, a slightly different number.

  Stop: 0 x 00000050 (0xAC58B3AB, 0 x 0, 00000000 00000001, 0x805A3E33)

  While trying to delete some KB as recommended Moreover here I also received:

  SPCMDCON.sys - address F737D52E base at F737B000, time stamp 3d6dd67c, FWIW.

  As I understand it a error 0 x 00000050 may be an error of memory, and I remembered a couple of old computers in the basement, I'll try a swap memory.

  The system is a Dell Inspiron E1505, Windows XP Home Edition

• Last good known

  Need advice on how to create a last known good on my windows 7, 32 bit OS.

  I wear that windows has a copy to the location of F8: However, I would like to know how to create one at some point in time.

  Thank you. GregCY

  I beg of you!

  Kind regards

  Patrick

• BlackBerry Storm 9500 Blackberry Smartphones - USB charge the question and problem of missed calls log

  Dear all,

  first of all Hello to everyone and that being said, I * fact * search both Google in general as well as this forum, in particular, prompt even to Vodafone was not any help, here I am, stuck with 2 problems with my BB Storm 9500 (.141 firmware, user of BES, Vodafone Germany) and it drives me crazy. Maybe someone here can help me.

  1. is it possible to load the storm via a USB cable connected to a computer * without * be disconnected from the network?

  Forcing me carry the charger around like a heavy phone (while previous models of BB) user authorized to charge by computer/USB without being offline.

  2. What can I do to see the missed calls in my call log?

  For the moment, I don't have the option to log in the missed calls message window, but to see them I have to unlock the storm via password I try * very * inconvenient (btw, the option to view missed calls directly in the call log was yet another function available with earlier models of BB).

  Any help or advice greatly appreciated!

  Concerning

  Jack

  Hi all

  It turns out that everything reported were caused by a screwed up political IT... that being resolved, everything works like a charm...

  THX once again all for your support and advice.

  Concerning

  Jack

• After that switch on my PC works for a minute then stops, this happens 3 times then starts with the last good Configuration

  It started only four days ago, I spend on the PC runs for a minute then stops. This can happen in 3 or 4 times. can Ichoose last good known Configuration and running a CHKDSK and usually begins.

  Hello

  1. Since when are you facing this problem?
  2. Did you make any recent changes?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  If the computer works fine in safe mode, then I suggest you perform the check and clean boot if this can help:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  For more information, see this link:
  http://support.Microsoft.com/kb/320299

  It will be useful.

• Windows 7 does not start; Startup Repair won't work; Know last good configuration will not work

  Windows 7 64 bit machine. Automatic Windows updates were installed during the night; has started acting strangely this afternoon.  After an attempt to re-start, got the "Windows Error Recovery" screen with the "Windows did not start. A recent message HW or SW change might be the cause".  When I try to 'Launch Startup Repair' a screen returns but just hangs.  When I try to "Start Windows normally", it brings back me to the Windows error recovery screen.  When I hit f8 for when you start to get the screen "Advanced Boot Options" and try to go into secure Mode or use the last good known Configuration option, each one brings back me to the Windows error recovery screen.

  Any ideas on how to get this resolved?  Thank you!!!

  Hello

  The problem is since it will not run the startup from the Windows 7 disc repair you then you
  need some kind of support, and the cause is likely to be material. A Dell thing you want to do
  is to restore the system back to the factory plug 'IF' possible so it would be a good idea to save the
  data before calling their (possible an another 'IF'). Try to put the hard drive in another computer
  as the 2nd disc (best method) or in an external case USB (less likely to work) and then copy
  data on removable media such as CD, DVD or other external USB drives.

  Good idea to check with the technical support Dell, their online documentation and the Dell forums where he
  perhaps others with the same problem.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  Other choices would be a real store of the computer performing the internal repairs (not the leeks and the glances at one
  Best Buy or other stores). Of course if she has any warranty Dell is the best choice, and
  can be in effect regardless of any warranty.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows XP restarts all the time; does not start mode safe mode and last known Configuration does not work either

  Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.

  I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?

  Thank you.

  The afflicted system has a working CD/DVD drive (even an external).

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu, it has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!