Last question to cut the upgrade

Similar Questions

• upgrade 11i question - preparing for the upgrade

  Hello
  
  How can I make sure that the upgrade patch driver moves all assets financial, data etc. in all periods, "not only the last 6 periods", 11i upgrade to 12.1.1? Our database is quite small, so it will not take much time to upgrade.
  
  I'm following the document titled:
  
  Oracle® E-Business Suite
  Upgrade Guide
  Version 11i 12.1.1
  Reference No.. E16342-04
  
  Section: Step 1 interval periods (optional)
  
  Read the upgrade guide, I know that I need to submit a request for a SLA... simultaneous program, but what I have to do this for all modules, this limitation apply to all modules or only GL?
  
  Thank you
  Sinan

  Sinan,

  Please see (R12.0 and R12.1: FAQ for the upgrade of ALS: ALS pre-staged at level, after upgrade and Hot Patch [604893.1 ID]), Questions 7, 8 9 and 10

  Thank you
  Hussein

• Question related to the upgrade to Windows 8.1

  I currently have a HP laptop with 4 GB of Ram and 64-bit Windows 7 SR1 running. I'll give this computer to my wife, that his old bridge is going Tango-uniform (UT). I bought a new Lenovo SmartCheck S535 with 6 GB Ram 1 TB of storage. It came with Windows 7 SR1 already on board and he also included disks for Windows 8.1. First of all, I did a set of boot rescue disks and start them on the side.

  But now, I have a question, do I have to transfer my files from HP to Lenovo so that both use Windows 7 SR1? Or. should I go ahead and upgrade the OS and transfer the files.

  I'm sure that happens with a lot of people, there will be a lot of programs that I keep less re - install on the new computer. They are trash who are picked up along the way for those of us who use or service of computers as often we brush our teeth. Oops... maybe it's not such a great comparison, but you get what I mean!

  So, I would be very interested to hear your advice, your success, Yes and even a failure or two, all for the purpose of education.

  Thank you and I look forward to hearing from some of you.

  SteveG

  Original title: which came first - the chicken or the egg? (So to speak!)

  As a system dual boot, the only place where the 2 operating systems interact is the bootstrapper. Windows 8 will take the priority, is somewhat different, as far as it goes, and if you select then Windows 7 system reboots so it can do a little slower. Of course, there will be a loss of disk space but you are then also 2 installs of Office and everything else.

  If you were to go down the possibility to buy a kit Windows 8.1 you avoid the need to do a complete reinstall, because it will improve instead. You also avoid the need to run the upgrade of the store from 8 to 8.1. You must decide if the cost is justified, but in your situation, I would seriously consider that option as well.

  Even if I'm not a big fan of Windows 8 I made the full switch and are accustomed to him, I'm sure you will as well.

• Feature: Get last question in the Specs of explicit master

  On v6114.  I have install a demo of explicit specification of master to the specifications of the packaging material and get the last number (unlocked) doesn't seem to work as expected.

  Our conditions were:

  1. the package has been approved.

  2 Master specification 500000-001 has been approved.

  3. direct explicit related specifications with getting last question icon in the UNLOCKED position.

  4 created a new edition of the Master Spec 500000-002 with replaced 500000 prerequisite-001

  5 a. approved the new number of Master Spec 500000-002.

  6 proposed old master Spec 500000-001 to Inactive.

  7. returned to the Packaging Material.

  8 expected related Master Spec 500000-001 to be replaced by the new show 500000-002 and it wasn't.

  Our expection of the behavior of the system is unrealistic?

  If our hope is realistic, is there a condition that we have neglected to get the behavior we want?

  Thank you.

  That should work. Please make sure you have the workflow is approved tag assigned to the technical mastery of the approved workflow stage.

• The upgrade to Windows 7 will not solve a problem starting?

  original title: Vista to 7

  About a year ago, vista has become corrupted and I can't even log on my laptop. I am out of warranty and I was wondering if the purchase Windows 7 might just do the trick?

  "magichands" wrote in message News: * e-mail address is removed from the privacy * .com...

  About a year ago, vista has become corrupted and I can't even log on my laptop. I am out of warranty and I was wondering if the purchase Windows 7 might just do the trick?

  A complete reinstallation of Vista may also do the trick. Back to factory fresh State (after copying out of the files that you can't afford to lose) by using the restore factory option provided by the manufacturer of the computer.  An upgrade to any version of Windows 7 might just put the questions along with the upgrade.

• El Capitan sign of a sudden in the last days (before and after the upgrade to 10.11.4 too)

  Hello

  El Capitan signed all of a sudden and then requires the password, it occurs usually once a day. This problem started last weekend before spent 10.11.4 and remained after the upgrade).

  I noticed that this happens usually when I play videos with VLC's .flv and the system is unable to show that the video itself only plays the sound, and after a few minutes that she signed all of a sudden. (I have a MacBook Pro (15-inch, mid-2015, retina, 2.5 GHz Intel Core i7))

  You have noticed the same problem?

  I'm looking forward to your kind help, thanks in advance!

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process (WindowServer or loginwindow).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Still not the problem of 72% during last month 32-bit Vista upgrade to Windows 7 for the month last 32 bit

  Didn't find any solution for the problem... upgrade vista to W7 ATU ATU stops at 72% and only put back the image of Vista may get the computer working again.
  What I have done:
  1. update of the old programs to W7 compatible.
  2. install the latest drivers SATA (compatible W7)
  3. install the latest audio drivers (compatible W7)
  3. uninstalled my antivirus software
  4 uninstalled RealCNC premium
  5 left the command line sfc/scannow to check and repair corrupt files
  6 disabled all Iltimate options
  7 updated my BIOS (Gigabyte - to a (compatible W7)
  8. no installed PowerDVD 8
  9 uninstalled Radiotracker
  10 uninstalled Acronis Home 11
  11 ran the configuration with all disconnected USB devices
  12 removed two chips of RAM (from 4 to 2 GB of RAM)
  13 Ran MSCONFIG hidden in all Microsoft services services and all the other disabled
  14. off in MSCONFIG also all startup items

  Between each element of cummulating, I ran the installation of W7. Even after the last of them, I always get the 72% jump.
  The blue screen says the same thing every time:
  BAD_POOL_HEADER
  Stop: 0 x 00000019

  Instead of update, I tried a clean install and held without any problem. But because of so many applications installed with many specific configurations, I need the upgrade option.

  My system:
  A Core2Duo, Gigabyte motherboard, 4 GB of RAM, two hard drives, about 200 senior applications and lower installed. The system is connected to a UPS APC"Smart-UPS 1500.

  Any ideas that can help me get the upgrade?

  Windows Update has nothing to do with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  0 X 00000019: BAD_POOL_HEADER
  A pool header problem is a problem with the allocation of memory for Windows. Device driver problems are probably the most common, but it can have various causes, including defective or other writing problems disc and problems with some routers... [Source: http://aumha.org/a/stop.htm]

  See also: http://msdn.microsoft.com/en-gb/library/ms793223.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When is MS stop support Vista service pact 2 and a few questions about the upgrade to the new version

  Hello comrades,.

  I have a few questions and concerns, and hope that you guys can share with me some lights here.

  1. What is MS stop supports the Covenant of service about the update of windows Vista 2 / other online support?

  2. my computer is vista based 32 bit, ultimate version. I heard that there are a lot of wonderful things about Windows 8. Should I move to Windows 8, or should I actually wait awhile then buy a new computer with Windows 8 64 bit attached?

  Honestly, it's a question that has been bothering me for some time. But my laptop is 4 GB of RAM, 1920 x 1080 HD display, 300 GB HARD drive at 5400 RPM (cost me a lot - it's a SONY) and have been works very well even with vista, the operating system highly complainted by many others. I think it would be a waste to buy a new computer, including the so-called net-books and i - PAD, I know, they are beautiful and sexy, but looking at their record, I was speechless. Yet knowing 32bits was maximum and MS has already announced that they stopped support for Vista SP1, consider that SP2 is expected online.

  3. how long do you 32-bit based can last? Should I increase the RAM of 4 GB to 6 GB and upgrade to Windows 8?

  4. How about 64-bit based of the future? Or is it true that most of the computer manufacturing starts in the future these application device of the base (not the real computer-driven software)?

  5. or should I forget it all, wait 3-4 years, until my laptop would be a museum piece, then buy a desktop computer which monitor and hard drive is all separated, knowing it is the best technique for the $s and phone for mobile computing laptop use there?

  I understand that this is somewhat a personal decision, but I really appreciate you guys Preview on the path of the operating system! Thank you

  Yes it will work to buy a copy upgrade of Windows 8.   This is a custom installation rather than an upgrade in place once you switch between 32-bit and 64-bit.  However you can still save money by buying the upgrade license.

  More important is that all the drivers you need will be available.  Your computer manufacturer will not write drivers for Windows 8 because the computer has been out of production far too long.

  Windows 8 is a significant departure from previous versions and I suggest that you upgrade to Windows 7 If you are tired of Vista or wait until you buy a new computer before Windows 8.  You read the discussions on the forums of Windows 8 CP.  At this point, there are many critics of Windows 8 due to the removal of the Start button and Start Menu.  Many people dislike having to rely on style Metro Screen start for many things.  It is becoming a major concern.

  To navigate to the Windows 8 CP forums use in the middle of the dropdown at the top of this forum page.

  Note:  Microsoft has not announced that there will be copies upgrade for Windows 8.  Microsoft has already stopped providing copies of upgrade of Office is not yet clear what will be available for 8.

• the upgrade of my Alienware m18x r2 RAPIDS Questions

  Hello yall I have some quick questions. My system is a gtx win8 - 675 m i7-3630qm Alienware m18x r2.

  I read that the 3840qm and the 3920xm are very similar and the price level for the 3920xm is not worth for an upgrade if money is a problem.

  In this spirit I think to go with the 3840qm, I just need to make sure that I have not upgraded the heat sink or the power supply if you choose the 3840qm.

  the next question is I'm tempted with going with the 3920xm only if I don't have to upgrade the PSU and the radiator, so I have to upgrade the PSU and the radiator?

  last question is after I or until I update my cpu do I need to uninstall or install anything?

  You can use the same any CPU heatsink upgrade you.

  For the i7 3840QM that you don't need to upgrade to the power adapter, you should be fine if you have the 240W.

• OpenPGP error; Encryption/signing failed; Send an unencrypted message? I get this after the upgrade to the latest version of last night. Can you help me?

  Last night, I've upgraded to the new version of Thunderbird 31. When I try to send a signed message, I get the error written in the subject line and my message arrives without the electronic signature.
  Can you help me with this problem that I didn't have before the upgrade?
  Thank you
  Cecilia

  I can not even sign my emails.

  So do you mean that you try just to send a signed message, not so much, encrypted and signed?

  You are prompted to enter the password for your private key when sending a signed message. You get the password prompt at all?

  What is your version of Enigmail?

  The version available on AMO is still 1.6, but the latest version of Enigmail is 1.7, still waiting for review on AMO. Version 1.6 does not work with TB 31, so if you have not 1.7 yet, you can try this.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/Enigmail/versions/

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• Hi all, I have icloud email and password of the last iphone user, but iphone is blocked and he don't remember security questions. Send the same as apple ID. I have all chansements to unlock in the appstore?

  Hi all, I have icloud email and password of the last iphone user, but iphone is blocked and he don't remember security questions. Send the same as apple ID. I have all chansements to unlock in the appstore?

  You can not unlock with the AppStore. Request a refund or ask the previous owner to retrieve his password:

  Check these items and follow the instructions.

  If you have forgotten your Apple - Apple Support ID

  If you forgot your Apple ID - Apple Support password

  https://iforgot.Apple.com/appleid

• Suggestions and Questions about the upgrade my Hardrive Mac and Ram.

  Hi This is my first time asking something in the forums. (At least I think) Well anyway, I got the Macbook Pro Mid 2012 13 "with the retina also runs the OS El captain. I do computer for school and sometimes animation video editing and ive noticed some performance as my projects get bigger and bigger issues. I want to improve my mac, but I'm not very tech savy and don't want to do something useless, so I had a few questions, I wanted to ask you.

  Do I need for my hard drive and my Ram?

  What effect will the upgrade of my Ram and what effect will be upgrading my hard drive with an SSD?

  I saw this SSD online and thought of novice opion that sounds get Id more bang for my buck (link) with her. Is this good? What more to kill? WiIll it still works? Could you suggest some other good affordable options?

  My next question if I decide to upgrade my Ram can provide you with some good affordable links to buy of new RAM sticks, is also 8 GB, the best he can do?

  My next question I watched a few videos online and by installing the updates level looks really easy and fast. But I use bootcamp (to play games sometimes), and I wanted to know if I save my files on my drive as ive seen people do videos, (something to wipe the drive and put it back in after installing updates) will be I lose my windows 7, I lost the disc to reinstall and he check so I really want to buy a new also do not want to lose the things I put in memory.

  From the retina MacBooks you is impossible to pass the ram as it is soldered to the logic board. As with the hard drive, it's just a card ssd and you can't get those anywhere because their hard to find.

• Epson LX 300 II matrix printer cuts the last digits when printing an invoice

  When you print an invoice it cuts the last digit in the column cents... like $145,2 instead of $145,25.  How can I fix?

  Hello

  -Did you change on your computer before the show?
  -What operating system is installed on your computer?

  It seems that there is a problem with the settings of the printer. I suggest to make a few changes in the settings of the printer or contact Epson support.

  Also, make sure that you have the latest printer drivers for your printer.
  http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly (Assuming you are using Windows 7).

• I bought a new computer with Vista last summer from Best Buy with a free upgrade to Windows 7. They said that the upgrade on their part has expired, but I can get the program from Microsoft for $18. If this is true... who should I contact?

  How can I get an upgrade from Vista to Windows 7 without having to pay full price?

  See http://www.microsoft.com/windows/buy/offers/upgrade-option.aspx

  Windows Update has nothing to do with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft