Last updated by Satellite A100-289 with a new CPU and additional RAM

Similar Questions

• Satellite A100-289 - does not accept the second module RAM

  Hello
  Sorry for my bad English

  I have a problem with my RAM secend slot. At the first bank i installt 1 GB 533 MHz DDR2 RAM in the second Bank too. The laptop starts but when I installed the second RAM after the BIOS Windows screen accepts 2 GB of RAM.

  [PC-information]
  Modellname Satellite A100
  TEILENUMMER PSAA9E-11H047GR
  Serial number 96304832Q
  BS-Version Microsoft Windows XP Professional 5.1.2600 Service Pack 3
  BIOS 6.00 version
  Processor Intel (r) Core (TM) 2 CPU T5500 @ 1.66 GHz

  Hello

  > but when I installed the second RAM after the BIOS Windows screen accept 2 GB of RAM.
  This means that you install RAM modules while the laptop is running?
  I m wondering your laptop still works. Normally, you could destroy the whole motherboard and the module.

  Anyway, to me it sounds like that your laptop isn't compatible with the memory modules vive. What modules do you have exactly?
  I have good experiences with the Kingston modules.

• Satellite A100 reboot with USB

  I have a new laptop satellite A100. I installed 2 device (modem ADSL and Webcam).
  I can't reboot my pc with the device, because I have a black screen. The hard drive does not work,
  and SO does not start.
  SO, if I reboot reboot without device, start corretely.

  Can you tell me why? and what I have to do?

  Thank you.

  Hello Pippo

  I noticed the same thing. If the USB memory key is attached to the unit needs a lot of time to start. Once I wait about 20 minutes, but if I remove the key USB the unit will start immediately.

  Believe me, that I tested it with four different Toshiba notebooks and everywhere that I got the same result. I put really know why this is happening but maybe you can try to use the USB hub with own power supply.

  Satellite A100 is a fairly new unit and I don t think that there is a problem with the operating system. The fact is that all the USB ports don't external devices of t with the same power supply. Sometimes may happen this work one device on a port USB port but not if you are connecting to another.

  As I said, you can try with USB hub.

• Satellite A100-289: after 5.1 Bios Update powerfault on usb device

  Hey, I have trouble after you install the Bios Version 5.1 on a Satellite A100-289.

  First: there is NO external USB device connected!
  After the awakening of the laptop Sleepmode , I received a message in Windows XP the a power fault has been detected on one of the USB devices. A dialog box opens and I can "reset" the device.

  This only happens after that the laptop is awake in sleepmode, perhaps to Hibernate, but not when the laptop starts. It seems that everything works well, but this post makes me nervous.

  Can someone tell me, what is going in this box?

  What about Mirko

  Hello

  5.1 BIOS was designed for Vista but it should (or it works) also with XP!

  However, you could try updating the BIOS with the other BIOS version that is operating system independent
  or / and you can try to disable the power save option for USB ports in Device Manager.

• Wi - Fi dies in Satellite A100/002 with Vista Business 64-bit

  Hello

  I have laptop Satellite A100/002 with Windows Vista 64 - bit Enterprise edition. My Wi - Fi died shortly after a random time. When I try to search for a wireless network, he found nothing. The only working solution is to restart the computer, and then it works fine until it dies again.
  I have updated the Wi - Fi drivers but it didn't solve my problem.

  It's really annoying especially when I play any game online.
  Can someone help me solve this problem?

  Have you updated the BIOS? Check the Toshiba site for a newer version.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also try an update of the firmware of the router. You can find it on the site of the factory.

  Last but not least, you must disable the security features of the router for the test. I mean hidden SSID, MAC address filtering and so far.

  Also, make sure that the option of the energy-saving WLAN card is disabled:
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

• Cannot install driver LAN/WLAN on Satellite A100 - 289 PSAA9E Win XP

  Hello

  I installed Windows XP on a Satellite A100 - 289 PSAA9E, but I can not install the network and WLAN page driver drivers.
  I always get the message that no driver regrets were found (I manually chose the directory with the downloaded drivers)

  Can someone help me?
  Where can I get the right drivers network controller vor and WLAN card?

  Hello

  As much as I know Sam A100 PSAA9E series supports Intel 3945ABG wireless card and also an Intel LAN card.
  Driver WLAN can be found here:
  http://APS2.toshiba-tro.de/WLAN/

  On the European driver Toshiba page I could find drivers for Satellite A100 PSAA9E series.
  But note; You must choose the Archive in the type of product because it old series.
  There are two different LAN drivers;
  -LAN driver v 9.2.24 for Ethernet Pro1000
  -LAN driver v 8.0.43.0 for Ethernet Pro100

  In order to check both!

• How to use the recovery on the Satellite A100-192 with 2 partitions CD

  I have a satellite a100-192 with 100 GB hard drive.
  When I bought it I used magic norton 8.0 partion to divide the disk into two partitions, c drive (used for files of program and other things; 20 GB) and d ' drive that I use for all my documents, music, videos and similar stuff...

  and now, because of a few bad shots, I made (the software bad... lol) I want to reinstall windows. and honestly, I have no idea how to proceed. what I mean, I don't know what cd to use (I have two CD when I bought the computer), in fact I guess that's the one with ms a note on it, but how to do it safely without losing all my data on the d drive?

  The problem is that I did a lot of relocations on desktop computers when you hava clean facilities and then I know what I'm doing, but I have no experience with bundled windows installations.

  Hello

  Usually, Toshiba laptops are supplied with a Toshiba restore CD.
  On this CD, you will find the image of Toshiba which contains all Toshiba drivers and utilities.

  The question is what CD image you received.
  Some people here in the forum suggested that, since January 2006 the Toshiba Recovery CD supports another recovery procedure. The new recovery CD does not support the ghost but the surface RECO and it s not possible to choose the partition for the installation of the OS.
  In this case the whole HARD disk will be deleted and you will lose all your partitions.

  I have only one old recovery CD and so I can't say if it is possible to choose the right partition. It was possible on the old recovery cd by selecting the expert mode.

  In my view, that should make a backup of you all important files before you begin the recovery procedure.

• Satellite A100-011 with Vista: DVD-ram UJ-850 s can not burn DVDs dual layer

  Hello

  cannot find answers to my problem, so start a new topic.
  Having Satellite A100-011 with Vista preinstalled and Mat * a DVD - RAM UJ-850 s (firmware 1.10).

  Recently installed Nero 7.5.9 and you want to burn DVD (6, 5 GB) media dual layer (Immation - Ritek).

  First time Nero stopped with information: could not perform start of Disc At Once (without damaging the media).
  After that, run Nero as Windows XP - SP2 program and burn half the disc (first layer), but when to start to burn the second layer (I guess), stop once again with the same error information (could not perform start of DAO).

  Simple disc burning layer without problem.

  Anyone any idea how to solve this problem?
  Thank you
  Luci

  Hello

  tried to record double-layer of a different brand? Maybe you should try it, because sometimes certain brands are not really taken in charge or not very well. And check the toshiba (or google) pilot site for new drivers or firmware for this drive, sometimes that it really helps.

  I think that the media are not really compatible, I ve read some similar problems in the roxio forum and they solved by using another brand.

  Would be nice if you give some information on this case... :)

  Welcome them

• Satellite A100 compatible with DDR 667 memory?

  Hello
  I have a question about the compatibility of memory, it seems that the Toshiba Satellite A100 series has the new motherboard (945 PM).

  The site intel, he says that this motherboard supports DDR 667. Although if you look closely at the specifications the A100 comes with memory DDR 533, isn't that strange? Or toshiba made to reduce the cost?

  Thanks to all those who are willing to clearlify this problem

  Hello

  There are different models of Satellite A100, but I found information that these modules of memory are supported:
  DDR2-533 256 MB (PA3389U - 2M 25)
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

  Depending on your region, can be supplied with the DDR2-533 or DDR2-667. These can be mixed, however, when mixed will default DDR2-533.

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup.

  original title: game Fallout 3 on Windows 7 problem

  I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup, I have a Toshiba Satellite, Fallout New Vegas works perfectly on my laptop, how can I play Fallout 3, is here to play Fallout 3 on windows 7.

  Hello

  You can see the link provided. It gives information that Fallout 3 is not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=fallout%203%20

  Windows 7 Compatibility Center: Fallout 3 http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=%20Fallout%203&OS=32-bit

  You may need to contact the manufacturer of game for support

• Re: Can Satellite A100-499 - I use Kingston HyperX DDR2-667 RAM?

  Hello.

  I have a Toshiba Satellite A100-499 with chipset Intel 945 PM and with 1 GB of RAM at 533 Mhz (this is the memory that came by default when it was purchased). I want to upgrade the memory to 4 GB 667 MHz and I saw two Kingston hyperx 2 GB DDR2 - 667 PC2 - 5300 CL4 (KHX5300S2LLK2 / 4G).

  I ' w concerned about the compatibility of this memory with my laptop. Memory that is shown in my laptop (KT667D2 / 2G) in the site web of Toshiba is also kingston and technical specifications are similar, but time lag case which I've not been able to verify. I'm looking for the forum and it seems that Toshiba laptops are very delicate with the memory.

  Did someone knows or has had experience with this combination? I don't want to spend the money to have to sell it later.

  Hello

  Theoretically, you can also use the Kingston HyperX modules. They are very similar to the normal Kingston modules, but they are a little faster. Certain times are may be lower, but this should t be a problem because it will be set automatically from the BIOS.

  A good friend of me always is the HyperX modules for its notebooks and there has never been a problem.
  In the worst cases the modules don't work, that you can bring it back to the computer store and ask Kingston normal modules.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Satellite L30-134 - question about upgrade CPU and video performance

  Hi have updated my satellite l30 - 134 with a bus t2450 dual core @2 ghz 533 Mhz = cpu is runing swell-marks look nice... BUT - my video performance droped a lot - grafics 2d - to top but 3d grafics are very poor why? driver problem?
  have also 2 g ram 2 x 1 g kinmax @ 6xx runing @533

  can anyone help? see that are some similar configs on this site... then maybe you can help me
  I'll try editing a xp 64 bit (curently runing xp sp3 32-BIT)

  > I'll try editing a xp 64 bit (curently runing xp sp3 32-BIT)
  Forget that don t recommend install Win XP 64-bit.
  Why? Because the Win XP 64 bit was not so popular as Win 32 bit or Vista/Win 7 64 bit and you won't find many drivers for Win XP 64 bit.
  Stay with XP 32 bit or you can change to Win 7 64 bit.

  Regarding the graphical issue;
  Have you noticed that also using the old CPU (Intel Celeron M Processor 410)?
  If this were not the case, then I guess this could be a problem between the CPU and BIOS.
  Otherwise I would recommend upgrading the graphics card driver.