Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. »

Similar Questions

• When I turn off my computer I get a message "CLTMNG. "EXE not responding do not. I have reset Firefox but still a problem.

  I run windows XP SP3. When the message appears that I have to cancel the activity and then the system will stop. It happens all the time, but most of the time that it does.

  Hello, this may be a problem possibly caused by malicious software on your pc. Please go to firefox > addons > extensions and remove any suspicious entries (toolbars, the things that you have not installed intentionally, I don't know what purpose they serve, etc.). also, go to Control Panel / programs and remove all toolbars or potentially unwanted software (led, search protect,...) from there and run a full scan of your system with software security you have in place and various other tools such as the free version of malwarebytes & adwcleaner.

  Fix Firefox problems caused by malicious software

• When I turn on my computer I get a message telling me stopped 419_302

  What can I do to fix this

  Hello

  1 did you change on your computer?

  2. What is the exact error message you received?

  Step 1:

  I suggest you to check in safe mode and perform the clean boot and check.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• When I turn on my computer, I get a warning that says missing entry: entry Rundll.

  When I turn on my computer, I get a warning that says missing entry: entry Rundll. What is c? What should I do?

  Hello

  You did changes to the computer before the show?

  Method 1:
  Step 1: Check if the problem occurs in safe mode:
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  Step 2: If the problem does not occur in safe mode, and then perform a clean boot and check:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 2:
  Run the sfc scan and check if there are any file system corruption.
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 3:
  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• When I turn on my computer, it gets stuck on the ultra-portable gigabyte 3 screen and custom which leave me there 2 hours still no luck the only button that works are TAB rebooting too

  Original title: stuck

  When I turn on my computer, it gets stuck on ultra-portable gigabyte 3 screen and custom wide movement which I gave 2 hours still no luck the only button that works are TAB restart too it can someone help please

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• I think I got a virus and when I turn on my computer, I get: "Windows needs to be activated."

  I think that I had a virus and when I turn on my computer, I get - windows must be enabled, but there is no start button to push to get into programs

  original title: kwindows must be enabled

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  If you can't get that in Safe Mode, try this

  1. If the computer can be started in a safe mode command prompt, do.

  2. at the command prompt, type this command exactly (space, caps and comma are required):

  Rundll32.exe syssetup, SetupOobeBnk

  3. restart.

  If you did it, your activation grace period will have been reset, giving you more time to work on the problem.

• When I turn on my computer, I get a blank black screen and must disable it again.

  When I turn on my computer, I get a blank black screen. Then, I turned off the computer and turned it back and a message says turn on in safe mode, safe mode with networking, or safe mode with command prompt.  I turned on in safe mode with network, then I got a message saying check your network settings or material in your control panel, but I don't know what to check. Then I did a system restore to an earlier date. Everything was well computer works well again. Then when I turned on my computer this morning the same thing again. I did the same restore to an earlier date and then was able to use my computer. Someone at - it ideas why this happened? the computer worked fine until two days ago. I use windows xp home addition.

  Hi jantravis,

  ·         There were no significant changes made on the computer before the show?

  ·         Have you installed new software, hardware or Windows updates?

  ·         You get any message on the computer when the problem occurs?

  ·         What is the exact message that you receive in safe mode?

  Check to see if this article helps you.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

• When I turn on my computer, I get a RunDLL error.

  Whenever I turn on my computer I get this error... error loading C:\User\kimberly.adams1\AppData\local\asutiyogo.dll

  I tried to implement everything and can't seem to solve the problem. I downloaded the DLL fix several programs, and they are all the same. Download for free analysis, and after the scan they want all the money to solve the problem. I even went to run. CMD and typed in regsur32asutiyogo.dll and got this error. The "asutiyogo.dll" failed to load Module. Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files... the specified module is not found...

  I have Windows Vista Home premium service pack 2

  Anyone has an idea on how to solve this problem?

  Whenever I turn on my computer I get this error... error loading C:\User\kimberly.adams1\AppData\local\asutiyogo.dll

  I tried to implement everything and can't seem to solve the problem. I downloaded the DLL fix several programs, and they are all the same. Download for free analysis, and after the scan they want all the money to solve the problem. I even went to run. CMD and typed in regsur32asutiyogo.dll and got this error. The "asutiyogo.dll" failed to load Module. Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files... the specified module is not found...

  I have Windows Vista Home premium service pack 2

  Anyone has an idea on how to solve this problem?

  Hey kimmy07

  Search Google has no information so that it may be malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If this does not work in normal mode only the above work in SafeMode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and if the problem persists you may need to remove it from the startup procedure

  try this program for that

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  Walter, the time zone traveller

• When I opened my Vista computer I get a message of quota

  When I opened my computer, I get a message Overquota, i.e. you're on quote reconfigures to use less space.  What should I do?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/when-i-turn-on-my-computer-an-error-message-comes/d10378f6-5371-4676-a6ff-ab84aa584020

• When I turn on my computer, I get a bubble in the lower right of the desktop that says: "a program has been blocked from editing your search default setting". Then "click to change your notification settings."

  Whenever I turn on my computer I have a bubble in the lower right corner of the desktop that says: 'Search Settings Notification' then 'program has been blocked from modifying your search default setting". Then "click to change your notification settings."
  When I click I get a box called Toolbar Options. Tab shows the search parameters. Statement: "search settings protects your search settings of the browser to keep the programs change without your knowledge." I am then presented with 2 boxes checked with the following instructions: 1. protect my browser default search and let know me of any attempt to change it.  2. enable the browser error Network Wizard page.  Downstairs, the options are either save or cancel.
  My question is what does all this mean? Should I uncheck boxes or both? How can I avoid this message occurs ever time I turn on PC?
  I must tell you that my browser is Mozilla Firefox.
  Thank you.

  original title: Notification settings search

  Hello

  I would check the first box for sure, the second is not as important but probably a good idea to choose from as well. Once you save it, it should not appear again.

• When I turn on my computer I application failed to initialize x 0 800700006. The handle is not valid.

  My computer is running very strong. All the folders are empty. And when I try to run clean up or programs of pc health they stop in the middle and say they can't shut up. I've lost all but 4 my desktop icons. they simply disappeared. My files are all empty. I lost all my downloads, documents and photos. Help!

  It looks like windows Defender may cause this error. If you use it, you can try this

  Or disable it, if his permit. And install this instead

  You are upgrading from a previous version of windows?

• When I turn on my computer, I get a black screen that says "NTLDR is missing" or "NTLDR is compressed".

  original title: NTLDR missing/Tablet

  I have a Gateway laptop that "turns" Windows XP (512 MB / 80 GB SATA in 2006).  It is slow, but it works--or he did until last night.
  While putting 'him' in a simple test, she landed and after salvation 3 fingers (Ctrl, alt, delete) to restart, it refused
  to move further beyond the initial blue screen; I could not connect.  Frustration led me out of disk OS reboot of the manufacturer and
  had to it.  Not only did the function "backup" first, but if I deleted everything and tried to start again the thought, the system would work.
  No luck.

  Now, after I turn it on, all I get is a black screen with the message "NTLDR is missing" or "NTLDR" compressed alternation.
  I read a few posts here with "solutions", but my system does not allow me to type anything other than Ctrl/alt/delete.  I can't type a
  unique character; the cursor will move to the command prompt. Unfortunately finances prohibiting my taking it for a "workshop" for repairs, so I'm really stuck.
  Can someone please tell me how to get the cursor to move, or how I can adjust the system to its old self?  Please?

  I have a Gateway laptop that "turns" Windows XP (512 MB / 80 GB SATA in 2006).  It is slow, but it works--or he did until last night.
  While putting 'him' in a simple test, she landed and after salvation 3 fingers (Ctrl, alt, delete) to restart, it refused
  to move further beyond the initial blue screen; I could not connect.  Frustration led me out of disk OS reboot of the manufacturer and
  had to it.  Not only did the function "backup" first, but if I deleted everything and tried to start again the thought, the system would work.
  No luck.

  Now, after I turn it on, all I get is a black screen with the message "NTLDR is missing" or "NTLDR" compressed alternation.
  I read a few posts here with "solutions", but my system does not allow me to type anything other than Ctrl/alt/delete.  I can't type a
  unique character; the cursor will move to the command prompt. Unfortunately finances prohibiting my taking it for a "workshop" for repairs, so I'm really stuck.
  Can someone please tell me how to get the cursor to move, or how I can adjust the system to its old self?  Please?

  See https://www.google.com.au/search?sourceid=navclient&aq=0&oq=NTLDR&ie=UTF-8&rlz=1T4IRFE_enAU448&q=ntldr+is+missing&gs_upl=0l0l0l12905lllllllllll0&aqi=g4&pbx=1

• My speakers to the stopped working. Them are the Logitech speakers to a laptop. When I turn on my laptop, I get a message that says the following. Error 0701: over-current usb on HC/Port-Bus: ooh Dev1dh Fun: 024 / Port: 01 h

  Logitech speakers no longer work on my laptop. I need help. I have windows vista home, I had these speakers for over a year and now they do not work.

  Hi Rickdm,

  This error occurs when you have a USB device or USB port problem.

  You can try to remove the speakers, restart the computer and check what is happening.

  If possible, try to connect another audio device in the computer. Try a pair of speakers to ensure that the problem is not related to the different sound device.

  Determine whether you can hear sound. If you can hear the noise, there is a problem with the audio device.

  This also happen if the usb port is damaged, try with a different usb port. If it still doesn't work do not, contact manufacturer as it is a hardware problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I check my e-mail I get an error saying: "windows mail has stopped working".

  When I go to retrieve my e-mail (windows mail), I get the message 'windows mail has stopped working ". I am advised to ensure that all updates are in place. They are in place. I don't have any other clues. I'm on the comcast system.

  original title: Email problem.

  Try to compact and repair the database (see www.oehelp.com/WMUtil/) and also check the antivirus interference in the operations of WinMail (www.oehelp.com/OETips.aspx#3) and see point 15 on this page as details well.

  Steve

• When I turn on my computer I get the following popup: "C:\Users\Cindie\AppData\Local\Temp\diskheme64.dll."

  having a problem

  
  

  "C:\Users\Cindie\AppData\Local\Temp\diskheme64.dll.

   

  I don't know what or how to get rid of. I don't want to wipe my computer. hope someone can help me

  What exactly is & when it happens?

  What is 'it', precisely?  What do you mean by popping up?  Is this some kind of dialog box?

  Try the screenshots taken & post here.  How to insert an image in a post on the Answers site