Latitude D410 (Win 7), WLAN 1350 Code 10
As a result of this post, I bought a Dell Wireless 1350 WLAN mini-PCI card and installed this morning.
I followed the instructions of Philip to download the driver from Microsoft in the catalogue, but after the installation, I get an error Code 10 (this device cannot start).
Then I tried the driver Dell here (for XP), but now I get an error Code 35 (your computer's system firmware does not enough information to properly configure and use this device. To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer). The BIOS is updated.
SysInfo reports the following (this does not bring the mini-PCI card):
Host name: LATD410
Name of the operating system: Microsoft Windows 7 Home Premium
OS version: 6.1.7601 Service Pack 1 Build 7601
OS manufacturer: Microsoft Corporation
OS configuration: Standalone Workstation
OS Build type: multiprocessor Free
Registered owner: Stephanie
Registered organization:
Product ID:
Original installation date: 09/11/2013, 12:27:29 AM
Starting system: 11 23, 2013, 11:37:13
System manufacturer: Dell Inc..
System model: Latitude D410
System type: X 86-based PC
Processor (s): 1 processor installed.
[01]: x 86 family 6 Model 13 Stepping 8 GenuineIntel ~ 1600 Mhz
BIOS version: Dell Inc. A05, 28/09/2005
Windows directory: C:\Windows
System directory: C:\Windows\system32
Starting device: \Device\HarddiskVolume1
Local system: en - us; English (United States)
Input locale: en - us; English (United States)
Time zone: (UTC-05:00) Eastern (U.S. & Canada)
Total physical memory: 1 015 MB
Available physical memory: 709 MB
Virtual memory: Max size: MB 2 039
Virtual memory: available: 1 434 MB
Virtual memory: in use: 605 MB
Office (s) swap file: C:\pagefile.sys
Domain: workgroup
Logon server: \\LATD410
Network adapters: 1 card installed.
[01]: Broadcom NetXtreme 57xx Gigabit Controller
Name of the connection: connection to the Local network
DHCP enabled: Yes
DHCP server: 192.168.1.1
IP addresses
[01]: 192.168.1.6
[02]: fe80::88c5:13f6:2106:6db4
Again, all my apologies that I realized that the card was not properly seated in the slot of the mini-PCI card. He pulled out, re-sitting there and voila! Operational wireless!
Tags: Dell Products
Similar Questions
-
Latitude D410 (Win 7), cannot activate wireless
I'm helping a friend whose brother-in-law bought him this laptop refurbished with Windows 7 installed by the supplier of refurbishment (they provide a disc and a license).
In the BIOS, wireless is enabled, but Fn - F2 does not activate the wireless (witness stays off). There is no wireless network card or any unknown device in Device Manager. I tried to turn off the wireless in the BIOS and then restore it.
Any suggestions?
LatD410
UPDATE: just determined that laptop has no mini-PCI Wireless card. Problem solved.
-
Satellite L655 - 11G PSK1EE - cannot find Win 7 WLan driver
I have reinstall my laptop and install win 7, I can't find the wireless driver (I don't know the model), I try to download from the pilot and he did not work!
What should I do?Hello
To my knowledge, the device supports the Realtek RTL8191SE Wlan card.
You should be able to download the right driver from this page:
http://APS.toshiba-tro.de/WLAN/?page=downloadsYour comments would be appreciated.
-
Hi Dell Experts,
a simple question I'm looking for some time for a good answer:
Switching WLAN switch with FN + F2 (Dell Vostro 3550) is one thing to do it manually.
Is there a way to do this with the code? For example, VB.Net, PowerShell, c#,...?
A definitive answer, I would be very grateful!
Concerning
Hans
HEAVY WEIGHT,
I'm not having much luck trying to find this information.
-
Win-10 Update error Code 0 x 1900101 '-0x4000D' and 'IRQL_UNEXPECTED_VALUE '.
Error code '0 x 1900101-0x4000D' and I think the associated Message reads
'IRQL_UNEXPECTED_VALUE '. I tried Win - 10 updated at least 4 - 5 times and get the same error which is very frustrating. Please help before the deadline to Win - 10 on 29/07/16
Original title: Win-10 upgrade retains fails with an error Code 92% done
If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.
If you encounter an error about enough space to perform the upgrade, see the instructions:
How to install Windows 10 on devices with limited space
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
Retry the upgrade manually:
Option 1: Using the media creation tool
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
Select upgrade this PC now and then click Next
Option 2: upgrade using the file ISO for Windows 10.
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
- Support your default BIOS reset BIOS.
- Check if there BIOS updates available for your system, and then to apply them.
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
-
Salvation; When I got this pc he had xp, I received the drive for win 7 and said just to install, I can't contact by phone cause I can't speak because of cancer and has been given no code
If the disk approximates the computer manufacturer is a type OEM brand, you will not need a key. Otherwise you will need a key to install it.
-
Re: Satellite Pro L300 PSLB9E - Win XP WLan need driver
I have a toshiba Satellite Pro L300 PSLB9E
It came with Vista, but today I installed windows xp.
I managed to find all hardware except for the wireless driver drivers.Please can someone direct me to the correct drivers?
Thank you
Hello
I think you should test the Realtek WLan driver.
You can find directly on the Realtek site.Test it!
-
Satellite L40 - 14F: Win XP WLan driver do not work
Hey,.
I bought this Satellite L40 - 14F Nooteboom and installed Win XP. All the drivers, I have not already working very well, but having band wifi. I tried with the evolution of the lines in net8187b.inf but Installer could not find info on the use of the device.
I don't know about hardware switch and I moved it to all sides. Do you have more ideas? (any ideas for this forum I know).
ConcerningHello
one question: which driver you tried to install? Intel or the Atheros driver. I mean, if you have an atheros card and that you have installed a driver package intel then it s possible that it won´t install.
Please, try the other available driver and then come back and give a short answer about this.
Greetings
-
Ive searched the web without a bit of luck. I reinstalled win xp sp2 took me a long time to get Installer 3.1 install. Finally, he did. now im really stuck with this problem and don't know where to begin the search. It would be really nice to have a fix for this, but I guess that's wishful thinking. can someone please tell me what I have to manually do to solved this problem so I can install sp3.
Thank you, don
Hi longryder,
See the link below for advice troubleshoot an installation of xp sp3 failed.
http://support.Microsoft.com/kb/950718
Good luck.
-
Update NET win forms 1603 error code
I can't install sagna MS .NET Framework Service Pack 2 - update .NET Framework WinForms"could not be installed error code 1603.
Hello
1. you try to install Windows updates or a stand-alone package?
I suggest that you follow the steps in this article and see if they help.
-
Can not save (Win 7) receive error Code: 0 x 80070070
Recently upgraded to Windows 7. no problems. Recover disc (D) is complete.
Adding hard drive (1 TB); can copy files to and from this drive
Change up by car to F (external drive); system won ' t back up - returns error code 0 x 80070070
Hello
1. you use backup windows or any other third-party backup program?
2. are you perform the backup of files or perform the system image backup?
I suggest you do that there is enough free space on the hard disk and then perform the back upward, try the steps below and check if that helps
Method 1:
Try to put the computer in a clean boot state, and check if the problem occurs or not.
To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below for more details:
How to troubleshoot a problem by performing a clean boot in Windows 7:http://support.Microsoft.com/kb/929135
Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.
Method 2: I suggest you temporarily disable the Antivirus\Firewall and then try to backup.
Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.
Method 3: Check the disk to external hard drive.
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
Click on the link above and go through the steps mentioned in the article.
WARNING: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
Additional information:
Back up your programs, files and system settings
http://Windows.Microsoft.com/en-us/Windows7/back-up-your-programs-system-settings-and-files
Hope this information is useful.
-
Cannot install CS5 on computer with Win 8. Exit code: 7
Hi, I can not install CS5 on computer with Win8. Installation Manager opens, and I can type the serialnr. After that, the installation stops and show me this:
Exit code: 7
-------------------------------------- Summary --------------------------------------
-0 fatal Error (s), 85 (s), 83 warning (s)
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
What can I do?
Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs
-
Re: Satellite L10 - 193 - Win XP WLan driver does not feature
Driver downloaded from the product page does not feature.
Device Manager: network controller (yellow)
PCI\VEN_8086 & DEV_4220 & SUBSYS_27418086 & REV_05\4 & 93A 72 167 & 0 & 20F0System: XP Home, just installed
All other drivers from the Web from Toshiba site for this model are OK.
How to solve this problem?
Have you tried to install THIS driver?
-
I don't know where to look or how install\download an audio driver for my dell latitude d410
I managed to delete my laptop sound driver! This is not the first time that this happens, but I don't know how to fix it! I was going thru deletion of files, I thought I is no longer necessary, and I have uninstalled or deleted audio driver who had worked up until I was eating with her...
All you need to do is go to this page:
Click on the button 'Start Here' far left "Support for private users." Keep drilling down until find you it.
Here's my concern, however. "Go to" and delete files from the way you have (without realizing what you do counts) can lead to instability. You may have done more damage than you think.
Here's my advice:
1 backup all your data if you have not yet done. I recommend backing up data to an external hard drive.
2. perform the Windows XP system restore:
http://support.Microsoft.com/kb/306084
Who will probably return all your system files to their correct location without having to go hunting for replacement drivers, etc..
If you need advice, let us know. There are some security programs that interfere with the restoration of the system, for example. In addition, if you want to know how to safely remove debris, we can help you with that, too.
-
Need help please.
The new employing unit that I bought had his work and when I went to upgrade the driver on the Dell product support site, it has not installed properly and now there is no sound at all.
Please help me this problem to return to a bit of his mounting speakers (volume was very low that's why I tried to upgrade the driver).
Jim,
Thank you very much. I had already tried the system restore and it did not work. But the back roller returned not only the sound, he also made sound 100% stronger on the computer speakers! Thank you!!!
Maybe you are looking for
-
Problems of status on my Macbook
When I put my status away he returned to Online in a few minutes each time
-
Hello, I have been printing all day and House 3pp, print came then to print 1 p to another file and nothing. I tried other files, reboot and nothing. He says that it is offline and now just went in my printer menu. I looked at other solutions, but al
-
HP pavilion n040sx: dedicated to video memory setting not in bios
The President complied, I have very light colors on my laptop by comparing with other laptops... They have dark colors... I have 8 GB of ram... 2 GB dedicated nvidia ge force 740 M graphics... But there is no video memory dedicated in the graphics ca
-
Keyboard does not not in repair system screens or install Windows
Hi, I have had fairly recently built myself a new pc and bought a copy of Windows 7 on the offer of the student they were running. I got all this and running for ages now, installed games, played against them, it is fully functional. Recently I wante
-
BBM I can't open my BBM once I have updated
Pls each I update my blackberry 9780 yesterday and since then my bbm has not worked again I try hv a lot of steps. That is, remove the batteries and so forth but the bbm is always on my camera, I can't acess it pls do I need to do. The update was mad