Latitude d610 alps touchpad driver needed

Similar Questions

• Satellite U500 - ALPS touchpad driver for WIndows 7 64 bit

  I have a U500 - 00 X 012 (Australian model) which I've upgraded to Windows 7 64 bit. Toshiba Australia site says to use the Vista 64 bit ALPS touchpad driver. I could not any Vista driver to work with my U500.

  The driver is available from the Toshiba Europe website http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20091112112139.zip

  The driver is v7.105.303.117

  Hope that someone who saves the many hours I've wasted trying to get the touchpad to work.

  Hello

  Normally most Vista drivers work under Windows. You get an error during installation and what happens exactly?

  Another question: why you n t try the driver from the European page? Normally, it should also work on your laptop.
  Check it!

• Satellite A200 - need 64 - bit ALPS touchpad driver

  Hello

  I just took my A200 (PSAE3E) return vista to vista 64-bit and cannot find a driver for my alps touchpad. Can anyone help?

  See you soon!

  It is really strange. On the download page of Toshiba for your model of laptop, it has classified version 7.100.301.4 for Windows Vista 64-bit. Can find you it?
  If please check again and choose the right portable model - A200 (PSAE3E).

• Satellite L40w-c touchpad driver needed for windows 10

  I'm trying to adjust the settings of my new satellite RADIUS touchpad to stop the pinch zoom automatically happening all the time and whenever I go to the control panel and try the additional settings for the touchpad, it closes, saying that it is not compatible. I can't find where to download the new driver on any Toshiba site easily. Help, please.

  Try to update the driver for the touchpad in Device Manager.

  You must choose the touchpad device and must click on "update driver".
  And note: the laptop must be connected to the internet to find the latest version of driver

• ALPS touchpad driver is not installed

  driver options ALPS pointing stick on my computer dell laptop are missing.  (when I try to reinstall (actually I want to remove the feature that interferes when keyboard) using dell support, she obligingly found driver, downloads, no installation of 75%, then tells me "impossible...) "contact with the seller.  There is no option panel under mouse or the drivers for the functionality of the Alps.

  Well all that must have worked is not for you

  May indicate other computer problems not surfaced yet

  You should try the Dell Forum to see if anyone else has this problem

  http://en.community.Dell.com/support-forums/default.aspx

• Need driver for 32 - bit Windows 8 for Alps touchpad on HP Pavilion dv4000 CTO Notebook PC fix scrolling.

  Cursor Alps touchpad very well, œuvres just need to fix the movements and scrolling.

  I know this is an older laptop that came with XP Pro, but I wanted to extend the life of it and everything works fine with the new installation of 32-bit Windows 8 Pro.

  Thanks in advance!

  Solved!

  Google "alps touchpad driver for windows 8" & after trying a few, the following fixed my touchpad scroll (he also added additional Win8 functions, such as edge shot left for the bar of charms, etc..):

  http://kurtsh.com/2012/09/16/download-Alps-touchpad-driver-for-Windows-8-for-Lenovo-G360/

  I had to remove the already installed driver first via Add/Remove Programs (like her whining on would not find Alps version, or something like that), then installed the new driver & restarted.

  Although the new driver for lenovo, it worked great for my HP dv4000 (p/n PC253AV).

• Satellite L300-01:00 - touchpad driver for Win 7 64 bit necessary

  Hello

  I can't find the above mentioned driver for win7 64 bit.
  Touchpad had worked normally, with a Win7 driver and after a msg of error just stopped working (I can't scroll with the touchpad).

  Enyone have model L300 with 64 bit OS or know model that have the same touchpad driver for win7 64 bit on support downloads?

  Help, please...

  Hello

  Touchpad driver is not in the laptop model.
  You can choose the touchpad drivers released for other series of satellites as well.
  I can recommend the Satellite L500. There you can download the Synaptics and Alps touchpad driver. Both are released for Win 7 64 bit.

  Please note that scrolling touchpad can be changed/turned on in the control panel-> mouse-> device settings.

  I think it must be enabled.

• HP 250 G4: Need to Synaptics TouchPad driver for HP 250 G4 running Win 7 32 bit

  Hello

  I need a Synaptics TouchPad driver for HP 250 G4 running Win 7 32-bit. When I go on the site of HP driver and enter the product number and the serial number of my laptop all the getting is the driver for Win 7 64 bit. There is a 32-bit driver for Win 7?

  Serial No.: [personal information]

  Product no.: N1A78EA #ABU

  Thank you

  Sean

  Hello:

  The driver also supports 32-bit operating systems.

  I explored the driver file and there is a 32-bit drivers.

  Also, when you explore the driver folder, you will find this document I zipped upward and the joint below...

• Satellite U400 - 150 (PSU45E) - ALPS touchpad problem

  Hello

  I am trying to solve some problems with the touchpad. My PSU45E Toshiba U400-150 was fitted in ALPS touchpad (synaptics, which is much better from day instead).

  Previously I worked on another laptop to factory with Synaptics and software that he had advanced options, better than the ALPS.

  1. when I use ALPS driver that the coursor movement seems to be "nervous", do not help the traffic regulations. So I uninstalled the driver ALPS, Synaptisc and the movement has been widely. However, the Synaptics software had any advanced options (such as the areas of contact, scroll, etc.). So I restored the ALPS driver, once again, and returned "jumpy" movement. I assume that the driver is not as good as synaptics.

  2 I need in fact for the middle button emulation. In synaptisc, there was this option in the "contact areas". I was using the upper right corner for the emulation of the middle button of the mouse. I was looking for such an option in the ALPS driver, but there is none.

  I woud be gratefull for any sollutions, suggestions about the issue 1 and 2. Is it possible to emulate the middle button of the mouse in the ALPS?

  TIA.

  I have a touchpad Alps on my Tecra and its very good, so maybe you just need to update the driver Alps?

  Using XP or Vista?

• Re: Satellite Pro L450D - what touchpad driver should I install

  I got this for my daughter through the access to the House, I have a few questions :)

  Drivers Mouse/touchpad in Device Manager is present just like a ps2 mouse.
  Now when I go to the website of pilots there are 2 other different: How do I know that I should install?

  I ask that I have this erratic cursor problem yes I could simply disable the touchpad, but I not, use the supplied mouse (am disabled in order to use it on the couch). And I read that there is a setting I can turn off if I go to the properties of the mouse tip (which ofc I can't because I did not install the driver!)

  While they are used synaptics or alps?

  thx a lot in advance

  St. Clare

  Hello

  There are two drivers touchpad; Alps and Synaptics

  The two pilots of the touchpad are needed and should be installed!

  Driver Synaptics provides many different options for touchpad like the scroll, etc.

  Welcome them

• Latitude D610 Audio Windows 7

  Hello everyone. I hope that someone can really help me out as soon as possible, but of course no rush... but seriously its kills me lol

  Anyway, the main problem is the Audio and I think that the video card as well. I got a computer for a gift of my teacher who happens to work with computers and etc. He gave me this laptop Latitude D610. He told me that he installed Windows 7 here and I checked the compatibility for my model and the test said it was compatible. But for some reason any repeat me it, "No Audio Output Is Installed." So I searched and searched my computer and it says my multimedia Audio Controller was there which should mean I have the audio driver installed on the site. (Correct me if I'm wrong) So I clicked on the volume icon to see if it would correct the problem and he sent me to the site to download the "updated".  I went to the Dell website and I downloaded the audio driver for my laptop but I have all the drivers apparently. I've checked everything and he says that he has no drivers last updated for my laptop model. I tried to uninstall Windows 7, but I think you must have the disk. And I tried to install Windows XP once more, but once more I need the disk. But I don't have it. AND what makes things is worse I'm a stranger so I do not have access.

  If possible can someone please tell me a way to get the video and Audio if possible...

  APendulum

  I checked the compatibility for my model and the test said it was compatible.

  But what he didn't tell you was that 7 does not contain the audio drivers for the old type AC97 Audio on motherboard D610, or that Dell doesn't have any AC97 driver for 7. Fortunately there is one for Vista try what worked for several people:

  Download the R99254 driver audio Sigmatel. Unzip it but cancel the installation process.
  It will unzip the files and store them in a folder on the hard disk to c:\Dell\drivers\R99254, and this folder will be a subfolder named WDM.
  Open Device Manager and expand system down devices. Locate the PCI Device with one? then (or if it is there then that to "Multimedia Audio Controller"). Go to properties and select Update driver. Select to manually locate the driver and let Windows not seek. Go to c:\Dell\drivers\R99254\WDM

  It should detect new hardware, and one of them should be the Sigmatel audio system.

  I don't know about the video. I remember someone saying they had problems with the video after installing 7.

• Value added package and touchpad driver for Linux

  I need to value pack and a Synaptics touchpad driver and it should work on Ubuntu Linux.

  Where can I find it?

  Hello!

  I put t know what phone you have but the Toshiba value added package is available for Windows. I checked the Web from Toshiba site but for Linux I can t find it.

  The driver for the touchpad, normally you can also find on the Toshiba site but it s is only available for Windows. Maybe you can find a driver on the site of the factory, for example, Synaptic.

  Good bye

• Satellite L955 - 10K - Synaptics Touchpad Driver is not working properly

  Hello, ASRR here.

  I had a problem with my driver for the Synaptics touchpad yesterday. I'm very used to use the "gestures" to work with my touchpad and the gestures did not work properly (in fact at all) for a while. Scrolling with two fingers, three fingers touch and others (in fact all the gestures) no longer work.

  The cursor moves, and works fine but not gestures.

  When I go to mouse option in the Control Panel, a window appears indicating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me if I want to uninstall.

  I have tried to uninstall, and then go on to Toshiba support page and download a driver that has been adapted for my model, operating system, etc..

  When I implemented the driver I downloaded and restart the PC, the same window appears when I try to go in mouse options in Control Panel and gestures don't work.

  An interesting thing I noticed though, is the fact that when I back the driver (in the settings to properties then Hardware) gestures do FINE. However, as he always asks you to restart the computer for Rolling back the driver will take place, when I restart it, it defines the Microsoft 2006 touchpad driver. who does not understand the gestures that I need.

  I tried several times to fix it, but I can't. I went the UEFI firmware set up and tried to restore default but without success.

  I really don't know what to do. Could someone please help?

  My Toshiba model is a Satellite L-955-10 K with a 64-bit processor and system of operating Windows 8 initially installed.

  Any help would be greatly appreciated. Thank you

  > I went the UEFI firmware set up and tried to restore default but without success.
  How to understand this? Have you tried to put your laptop to factory settings?
  To be honest I don't understand what the problem is here. I also thought that the new driver installation can help but obviously it didn't help much.

  I don't know if this is an option for you, but you can set laptop to factory again and I hope that everything will work properly again. Before doing this test also to roll back OS to an earlier time using System Restore option.

  One last thing: it has nothing to do with your touchpad problem, but I recommend you create a recovery (recovery backup image) using pre-installed recovery media creator media.

• HP 250 G3: I can't find the touchpad driver

  Hi all!

  I recently bought a nice HP 250 G3 (code: J4R70EA). I am very sattisfied with my purchase (even if there is a dead pixel that now I've corrected). I also managed to install and find all the drivers (since it came with FreeDOS), except for the touchpad driver. The touchpad works but all useful actions are missing.

  Can you please help to find the last updated driver for my touchpad so that I can use gestures effectively?

  PS: I have a 32 bit Windows 7 OS. HP only provides 64-bit for my laptop drivers. I like to keep 32-bit.

  Thank you!

  Thanks for the reply!

  I just think that 64-bit OS are a unacessary transition. For my average use (navigation, Office suite, etc.) and since I was only 4 GB of RAM, I wouldn't benefit by using a 64 bit OS.

  64-bit OSs are not an operating system more safe and stable. Yes, I'm aware of backward compatibility, but why I want to install 64-bit software because they use more resources (both in terms of disk space and RAM) when all I need is available in 32-bit?

  Perhaps you have more than 4 GB of RAM, and maybe you're using a program like Photoshop or Auto CAD. If this is the case I certainly recognize the need for a 64 bit OS. Otherwise, for the average user, 64-bit is just a hype, a marketing tool or a buzz.

  These are just my 2 cents

  PS: I tried these driver yesterday and it didn't really install anything. I tried earlier official HP drivers and magically everything works. Thus, they are not a driver 64 bit OS only after all

• G780 keyboard does not work, but ONLY if the Elan Touchpad driver is installed.

  I have a bad surprise today--unlike other manufacturers, which offers one year free tech support, Lenovo does not. $179 for a contract or $89 to cover an isolated incident. Thank you, guys. :-/

  Here's my problem.

  G780, bought last October. Upgrade to Win7 Home Premium Win8 Pro.

  A few days ago the integrated keyboard has stopped working. It works in the BIOS, but when you start in Windows, Windows does not recognize it.

  There is a PS/2 keyboard driver and device keyboard HID that appear in Win8 Device Manager. I guess these are the drivers for the built-in keyboard. If I plug in a USB keyboard, it appears in the device as an additional device keyboard HID Manager.

  By trial and error, I discovered that the keyboard still works fine when the Elan touchpad driver is not installed. The problem with THAT: I can not disable the touchpad unless the driver is installed, and if the touchpad is not disabled, it will screw me up because I accidentally brush my hand against the touchpad while typing.

  I also noticed that sometimes the touchpad in the system tray icon with a WARNING icon overlaid on top of it (you know, the little yellow triangle with exclamation point). I can't understand why, and I can't understand what has changed on my computer that caused the keyboard to stop functioning properly.

  I tried uninstalling the Elan touchpad driver, download the latest driver from support G780 web page and put it back. No luck.

  I make do with a USB keyboard at the moment, but I really need this problem is resolved.

  Thanks in advance.

  So I had uninstalled the drivers of momentum earlier... yesterday I tried to reinstall those supplied with the computer.

  At least the keyboard worked now, but the drivers have not been properly disable the touchpad when I plugged the mouse.

  Then I hit Fn - F6, not really thinking that he would do anything, but it fixed the problem.

  I would have but the pilot would have overridden some setting I put with Fn - F6, but... maybe not.

  Problem solved.