LAUNCH WINDOWS WITHOUT ASSISTANCE CANNOT START

Similar Questions

• "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows

  A friend gave me your laptop to watch - there edition family vista (64 bit (I think) on it and when you try to run Explorer he says it does not find or access is denied and something about 16 bit / 64 bit (it has been a few days and I'm not memory clearly until what I try again tonight)

  "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows"

  If you try to run a dll / Panel or anything like that, you will get an error message saying that it cannot run some 16-bit process or access denied.

  I did a lot of research on Google and nothing someone he said worked - which "everyone" giving full access to the C:\WINDOWS\Registration, executes a command secedit, a sfc/scannow, do a system restore to the point of older, make a new user account, start up in safe mode...

  So now I'm pretty stuck. I'm SURE I've seen this problem before with reference to 16-bit etc error messages, but in home edition I do not have the MMC users & groups (had to make new user with password renew then that starts in another environment) or the Security tab of the properties of file/folder for permissions NTFS etc (had to use icacls).

  Can someone enlighten us justice on that shiney? : o I don't want to have to redo the entire Setup, I'm sure it is something fixable...

  OK, so for those who want to know the real difficulty? --He came from a guy on the forums of TekTips

  goombawaho (MIS)

  5-13 dec 08:05

  Before charging, tell him from a prompt CMD (Administrator). Go in the the C:/windows/system32 folder and type "Rename verclsid.exe verclsid.old. reset

  I guess that I didn't that I had seen the name "verclsid.exe" in some of these error messages trying to run things.  I looked and saw it was to check the files or something.
  Anyway I couldn't rename even in admin console so I started in a different environment and renamed the copy in system32 and syswow64.
  Now, I've started and bang things seem to be ok! I guess I should try and replace it with a known working version? That or just give back it.
  I doubt that everybody does all c:\windows control total should be too dangerous, right... just?  : P I don't have a way to put permissions by default anyway, so Hey.  Formatting beats!

  Now why everyone here didn't it?  I knew it would be simple!  : p

• On Pavilion 500 - 249: 10 Windows DVD burner cannot start my drive BDDVDRW CH30L (code 19)

  After upgrade Windows 8.1 for Windows 10, my DVD writer cannot be started.  States of Windows...

  "Windows cannot start this hardware device because its configuration (in the registry) is incomplete or damaged (code 19).

  I've uninstalled and reinstalled the driver of DVD (which says that windows is the latest version), does not.

  Hello

  Try to follow the procedure at the title of the subheading resolution 2: Fix corrupted registry entries on the link below to remove upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• window Movie Maker cannot start

  Hi, I am on window 7 and I would like to y at - it means that I can start the movie maker window? It was the first time that I start the window movie maker and he told me that the manufacturer of window film can not start, asking me to make sure that my computer meets the minimum system requirements, before trying to restart and then try to update the driver for my video card if it does not restart. However, the manufacturer of window film still fails to start after trying to update and according to the information provided in the support. Thank you.

  Hi, I am on window 7 and I would like to y at - it means that I can start the movie maker window? It was the first time that I start the window movie maker and he told me that the manufacturer of window film can not start, asking me to make sure that my computer meets the minimum system requirements, before trying to restart and then try to update the driver for my video card if it does not restart. However, the manufacturer of window film still fails to start after trying to update and according to the information provided in the support. Thank you.

  =======================================================
  No guarantee... but maybe the article would be worth a visit:

  (2741355) you cannot start Windows Live Movie
  Machine to 2012 when a graphics card that supports only supported
  DirectX 9 is installed on a Windows 7 or Windows
  Server 2008 R2 computer
  http://support.Microsoft.com/kb/2741355

• The Windows fax service cannot start because there is no such thing as a privilege in the fax service account.

  I'm trying to set up Windows Fax and Scan to store faxes "received" in a folder encrypted (EFS). (I use Windows Vista Business).

  The fax service will not start if it set to log on as a "local system account", but faxes are stored with the certificate of local system and inaccessible to other users.

  To work around this problem, I tried to configure the Fax Service to log on under a specific user account. However, after that and try to re - start the Service I get.

  Error: 1297 as a service privilege is needed to function properly does not exist in the service account configuration.

  One of the services that begins with the "local system account" does not automatically start with a normal user account and if you get the message.  Most of the services are designed to start with the local system account and not a special user account (actually, not on my system using a specific user account for services).  I think that part is OK and you must return it to the local system account (so eliminate the error message and remove that as a problem to solve).

  I think the question may also be a permissions problem in the user access to the fax.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  If that is indeed a problem of certificates (and it seems there is a but looks like he takes care of himself with the Wizard), then we must make the certificate available to all users of the system (from where it is now stored) - and I think I saw how to do this in secpol.msc.  Here is some information I found on EFS secpol.msc in the public key policies (you can get it by entering this in the area of research and the antering and then a double click on the program icon that appears) where you would put in place.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The Encrypting File System (EFS) is an encryption technology of base file used to store the encrypted files on NTFS file system volumes. Encrypted files cannot be used unless the user has access to the keys needed to decrypt the information.

  Encryption is transparent to the user that encrypted the file. This means that you don't have to manually decrypt the encrypted file before that you can use. You can open and edit the file as you normally would. Once you encrypt a file or folder, you work with the encrypted file, or a folder like you do with any other file or folder.

  The use of EFS is similar to using permissions on files and folders. Both methods can be used to restrict access to the data. However, an attacker who gets physical access unauthorized to your encrypted files or folders will be prevented from reading. If the intruder tries to open or copy your encrypted file or folder, he or she receives an access denied message. Permissions on files and folders do not protect against unauthorized physical attacks.

  You encrypt or decrypt a folder or file by setting the property of encryption for files and folders, as you define another attribute such as read-only, compressed, or hidden. If you encrypt a folder, all files and subfolders created in the encrypted folder are automatically encrypted. It is recommended that you encrypt at the folder level.

  You can also encrypt or decrypt a file or folder using the Cipher command.

  When you work with encrypted files and folders, keep in mind the following information:

  • Only the files and folders on NTFS volumes can be encrypted. However, you can use Web distributed authoring and versioning (WebDAV), which also works with NTFS, to transfer files in encrypted form.
  • Files or compressed files can also be encrypted. If the user marks a file or folder for encryption, that file or folder will be uncompressed.
  • Encrypted files are decrypted if you copy or move the file to a volume that is not an NTFS volume.
  • Moving files unencrypted in an encrypted folder will automatically cause these files to be encrypted in the new folder. However, the reverse will not automatically decrypt files. The files must be explicitly decrypted.
  • Files marked with the system attribute cannot be encrypted, nor can files in the system root directory structure.
  • Encrypt a file or a folder does not protect against the removal or the list of files or directories. Anyone with the appropriate permissions can delete or list encrypted folders or files. For this reason, the use of EFS in combination with NTFS permissions is recommended.
  • You can encrypt or decrypt files and files located on a remote computer that has been enabled for remote encryption, but, in this version of Windows, the data that is transmitted over the network by this process is not encrypted. Other protocols, such as Secure Socket Layer/Transport Layer Security (SSL/TLS) or Internet Protocol security (IPsec) must be used to encrypt data while they are transmitted over the network. (You can also use WebDAV, as described in the first bullet, to pass the file in encrypted form.)

  EFS policy settings

  You can use Group Policy to configure a number of EFS settings.

  Allow or disallow the EFS

  You can choose to allow or prohibit the use of EFS altogether. If you do not configure the policy settings for EFS, it is OK.

  The EFS options

  If you choose to allow EFS, you can also select a number of options, such as whether to automatically encrypt the Documents folder of the user, to require a smart card for use with EFS, to cache keys created based on a smart card, to enable the encryption of the Windows page file, or to notify users to make the backup copies of their encryption keys.

  EFS certificate

  EFS encryption is based on the pairs of keys associated with certificates. In most managed environments, the certificates are issued by a certification authority (CA) running in the field. Users can automatically be issued a certificate from the CA without manual intervention. EFS settings include a drop-down models of certificates that are available in the field list so that you can specify which certificate template to use for autoenrollment.

  Note
  	The list includes all the models of certificates, present in the field. An administrator must configure the CA so that certificates can be issued. Some displayed certificates are not available.

  In cases where a certificate cannot be issued by a certification authority, EFS can use a self-signed certificate created on the local computer (there is a section in secpol.msc to create a certificate). You can choose to disable this functionality and specify a default key length.

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------

  I don't know if that helped or not.  Please let us know and be specific about what other questions, you may have because I don't know what you mean and which is still confusing (and to be honest, I am a little confused at this point - it is not an easy task to accomplish).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / A +.

• Windows media player cannot start some users not others

  I am running vista 32 bit and my WMP does not load. I click the icon and the circle of work happens, but nothing happens. WMP does not work in the background and does not appear in the process in the Task Manager. the IM running version is 11.0.6000.6353. I tried

  Difficulty:

  1. click on Start (Orb), then all programs , then Accessories .

  2. right click on command prompt .  Run as administrator .  Click on continue or enter the password.

  3. type the following command:

  regsvr32 jscript.dll

  Press enter, and then click ok.  Then type the following text:

  regsvr32 vbscript.dll

      Press enter, and then click ok.

  4 type exit , and then press ENTER.

  5. launch WMP.

  6 done!

  Here is the link where I found the solution:

  http://support.Microsoft.com/kb/925704/en-us

  If this does not work you can try its:

  "Said XAG on the track."

  Hi guys

  I had the same problem and after looking at many found that a codec was corrupting the libraries used by WM11.

  First: exec cmd in administrator mode (run as administrator) regsvr32 /u mmswitch.ax bad codec in my case

  Second: regsrv32 wmp.dll

  Third: import that it keys to register, you can do a .reg file, saving with Notepad:

  REGEDIT4
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA71-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.WMZ ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA72-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.AIFF ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA73-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.AU ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA74-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.MIDI ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA76-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.MP3 ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA77-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.MP3 ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA78-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.M3U ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA7B-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.WAV ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA83-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.WAX ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA84-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.WMA ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA88-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.AVI ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA89-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.MPEG ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA8F-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.ASX ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA90-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.ASX ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA92-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.ASF ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA93-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.ASX ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA94-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.WMV ".
  [HKEY_CLASSES_ROOT\CLSID\ {CD3AFA95-B84F-48F0-9393-7EDC34128127} \ProgID] @= "WMP11. AssocFile.WVX ".
  [HKEY_CLASSES_ROOT\CLSID\ {EE4DA6A4-8C52-4a63-BBB8-97C93D7E1B6C} \ProgID] @= "WMP11. AssocFile.WMD ".

  Enter the registry and import the file.

  have also tried

  A: apparently, this is caused by a mixup of version in the registry. If you get rid of the incorrect information, Media Player will stop complaining and run very well. Here's how:

  * Click on the round of departure.
  * Enter REGEDIT.
  * When you are prompted, click on continue or enter an administrator password.
  * In the registry editor, navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\Setup\Installed key versions. Just like you should navigate in a certain folder in Windows Explorer.
  * In the right pane find three values named wmp.dll wmplayer.exe and wmploc.dll.
  * Click each of these values in turn, and then choose Delete on the shortcut menu.
  * Close the registry editor

  Media Player should now load without any gripes. -Neil j. Rubenking.

  any ideas?

  Hello

  Follow these steps in the order given, even if you did a few before - please don't skip anything.

  Have you recently installed another player?

  Right-click on taskbar - process and see if WMPlayer.exe is already hidden. If the end then on her process.

  --------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html
  ----------------------------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently installed another player?

  Reset your associations:

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows boot manager / cannot start windows

  I currently have windows vista and at startup, I get the following message. Windows could not start. He recommended I insert the installation disc and restart my computer, but my computer (gateway) came with vista installed.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  Read the above about gateway Recovery Options.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 8 PC - cannot start

  I though maybe I had some spyware so I ran Spybot. Are listed several points, he had an error message whenever I tried to remove one of those found. Then, I tried out Spybot but had to go to the Task Manager to close the program. I decided that I had a real problem and decide to run the system restore and go to a previous Restore Point. My computer has been restarted by trying to go to the system restore. Now, whenever I try to restart my computer, I get the following message: Windows Script Host (X) cannot find the file script 'X:\onekey\main\Irscall.vbs '. I can't get past this error message. F1 opens the BIOS but F12 does not at all.  Any help would be much appreciated.

  Hello

  You can restore the BIOS to the default settings and check if this solves the problem.

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=YaST-3JWKJX

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists, please contact Lenovo support:

  https://forums.Lenovo.com/T5/Windows-8-and-8-1/BD-p/Windows_8

  I hope this helps.

• Update Windows 7 locked cannot start in safe mode

  Compaq CQ2815EA under Windows 7 Home Premium desktop PC

  Windows 7 Home premium is stuck on 'install the updates do not power off or unplug your machine'.

  I tried the boot safe mode but F8 does not work. PC starts just return to the screen of Windows Update.

  I tried full power and restart. Again, goes back to the Windows Update screen.

  Tried to use HP and Windows Rescue Disk recovery disks, but had no success with them as I don't know which of these menu options to use.

  Hello

  Try the following.

  Boot from the hot spare.  Select repair.

  Select the "Repair your computer" option and follow Option 2 in the guide here to run the Windows system restore.

  Kind regards

  DP - K

• Crash when windows was updated; Cannot start windows.

  After installing the latest Windows Update, and restart the computer, Windows loaded normally.  I logged my user profile and nothing happened - responsible for the background image, the stunned startup sound, but then nothing.  I waited for almost an hour.  The computer was not processing anything.  I used the Task Manager to disconnect from my profile and reconnected, and it's the same thing.  I restarted the computer, and now, Windows will not boot.

  More strange failure to start - when I use F8, and I try to start safe mode, he asks me what operating system I want to use - and there are two Windows XPs listed.  Work not at all; the other comes to Mup.sys and then freezes.

  If I try to boot normally, the Windows loading screen shows for a minute or two, and then the screen goes black.

  The next time you get the F8 menu, try the "Last known good Configuration" option.

• Windows live mail cannot start due to corrupted calendar

  Could not open windows live mail.  Calendar contains corrupted data.
  0 x 80004002

  Also Windows will not update.  Said the service is not running.

  Windows Live Mail help is in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

  With regard to the issue of the update of Windows: start the service.

• Windows live messenger cannot start or open

  When I click to open windows live messenger says error message the application failed to start because it is next, the configuration is incorrect. I don't know what to do. Please help me

  Messenger - side by side configuration error

  Start button > Search box, type regedit > press the Enter key > (uac prompt) >

  expand (click the pointer before) HKEY_CURRENT_USER >
  Expand Software >
  expand Microsoft >
  Expand MSNMessenger >
  Expand PerPassportSettings > under PerPassportSettings, find 2 folders with a series of numbers > delete the two folders including their subfolders > window regedit.
  Restart the Messenger.

  If the above does not help, please repost in Windows Live Solution center - forum Messenger - Messenger discussions section

  http://windowslivehelp.com/forums.aspx?ProductID=2

• Windows vista home cannot start

  Hello everyone

  I try to start my windows vista home, but it is stuck at the loading screen. When I start in a safe atmosphere, it loads the drivers until he is blocked at AVGIDSvx.sys
  . I have 2 questions about this problem:

  1. I guess I do a startup disk for vista and then do a restore back home. Is this possible? and if it can solve the problem?

  2. I read somewhere that the present solution is to use a windows vista cd and select the repair option. but I install Ubuntu with windows
  so, will this step (I mean do repair for windows) affect the Ubuntu?

  Thank you

  Hello

  I suggest to have the installation disc and follow the steps below:

  Method 1:

  Run start up repair, follow the steps in the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 2:

  If the previous step fails, I suggest that you have Windows 7 disc and use the Windows recovery environment (WinRE) to run the system restore, follow these in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

• Windows Search service cannot start the system cannot find the path specified.

  The last important thing I did was to create a new user account.  Not sure how long the summer passes, I'm not looking that often.

  I can find how do, I just need help to find out what it is I do.
  Log name: System

  Source: Service Control Manager

  Date: 15/02/2012-17:22:45

  Event ID: 7000

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: PC-user

  Description:

  The research service Windows could not start because of the following error:

  The system does not have the specified path.

  The event XML:

   

     

      7000

      0

      2

      0

      0

      0 x 8080000000000000

     

      326251

     

     

      System

      User-PC

     

   

   

      Windows Search

      %%d Ko

   

  Oops, I got it.   I went to turn on and outside research turned rebooted windows features. Here again, to turn back and after another reboot, I'm back in business.

• Repair Windows without having to start, but with the tool of reliable micro-soft

  Question:

  How can I repair my windows lack of files without any boot device. I want to repair it with a tool flexible microphone. Is this possible? If the answer is "Yes"; then please share everything in detail.

  Press the F8 key at startup high and choose one or several repair options several times.