LaunchExecutableEx() returns not - 4 when the path of the exe is not found

LaunchExecutableEx() does not return an error event (or - 3-4) while there is no such thing as the path to the file on the PC I am runing the application on. It returns 0 (as if the exe has succeeded).

Thank you

Mira

The example works. I thing that I understand the problem.

I go to the LaunchExecutable is not the right path of the exe. I pass java-jar + path of the exe path to XML format. All LaunchExecutableEx knows is that he has launched java-jar (where it returns 0). Path to the java executable is not relevant to LaunchExecutableEx.

I guess I'll have to do something else before the call to LaunchExecutableEx to verify executable java and XML are present.

Tags: NI Software

Similar Questions

  • Network type changes 'Public' and does not return to work when the default gateway is detected

    Original title: Type of network not restored on ethernet cable reconnect.

    I have a Dell Precision R5500 running Windows 7 Professional Service Pack 1. It is connected to a network that is stored as a type of 'work '. When the ethernet cable is removed and replaced network type changes to 'Public' and does not return to work when the default gateway is detected. I also have a Toshiba Tecra M10 running Window 7 Professional Service Pack 1 that initially detects the network restored as 'Public', but 'Work' once again Exchange is a connection to the default gateway. Is there a setting somewhere in the strength of the network to double check its type periodically?

    Hello

    You have any other network assets wireless (specifically) running on the computer?

    Have another active network connection could also cause this.

    Allows us to follow the methods mentioned below and see if they help.

    Method 1: Run the network troubleshooter.

    When the network type gets changed to 'Public' after the cable is disconnected and reconnected. The troubleshooter should let you know if there are errors with the associated services.

    See the following article:

    Using the troubleshooter from network in Windows 7:

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7


    Method 2:
    check if network discovery and file sharing options are enabled in the network and sharing Center.

    See the following steps:

    a. click on start toreduce this top, type network and sharing Center in the Start Search box, and then click network and sharing Center in the programs list.

    b. If network discovery is off, click the arrow to expand the section, click turn on network discoveryand then click apply.

    Reduce this includes this imIf that you are prompted for an administrator password or for confirmation, type your password or click continue.

    c. If file sharing is off, click the arrow to expand the section, click turn on file sharingand then click apply.

    Collapse this includes this ima

    If you are prompted for an administrator password or for confirmation, type your password, or click continue.


    Method 3: Uninstall the network drivers and then install the last set of drivers on the manufacturer's Web site and check the issue.

    See the following steps:

    (a) click Start, right click on computer.

    (b) click on properties, click on Device Manager

    (c) expand the network adapter, right click on the adapter option

    (d) click on uninstall

    (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

    Reference:

    Updated a hardware driver that is not working properly:

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  • CP 2.8: WMI returned Not found

    After CP 2.8 installed, then download and save the missing DLL, I ran a scan of the inventory and was awarded:

    02/02/2011 16:57:29:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:30:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:31:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:33:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:34:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:36:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:37:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:38:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:39:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:40:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:42:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:43:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:44:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:46:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:48:0:4180: WARNING: WMI returned Not found
    02/02/2011 16:57:50:0:4180: WARNING: WMI returned Not found

    The machines I have scan were actually connection OK use wmimgmt.msc.

    Anyone encountered this?

    Is this a known issue?

    Suzan,

    I think you said yesterday that new construction (46712) of the collector 2.8 solves these WMI miscalenous errors?

    I just wish this thread marked as answer in case anyone searching in the forums.

    Best regards

    Jon Hemming

  • How to end loop when the desired value is found.

    Hi I have a loop below and I want the loop at the end when the desired value is found.

    <? PHP {? >}

    <? PHP $allvotedid = $row_VotedUsers ["VotedID"]? >

    <? PHP} while ($row_VotedUsers = mysql_fetch_assoc ($VotedUsers));? >

    I want this loop to the end when $row_VotedUsers ['VotedID'] is equal to the variable URL ID. So lets say pagename.php? ID = 1, I want the loop to go until he finds an ID value which is 1. And then I want this set to $allvotedid. And if detects any value to it then I want to stop a loop.

    Thanks for any help. I hope I made that clear.

    cwhazzoo wrote:

    Hi I have a loop below and I want the loop at the end when the desired value is found.

    The following will do what you asked:

    
    
    
    

    However, it is a very inefficient way to do it. If you are interested is whether the code transmitted through the URL is in the VotedID column, simply create a Recordset by using the URL parameter ID ($_GET ['ID']) as the filter. Then check the value of $totalRows_VotedUsers. If it is 1, the user has voted. If it is 0, the user has not voted.

  • Highlighted visited links is not correctly returning on no when the purpose of the link changes.

    I visit a bulletin board (http://www.bogleheads.org/index.htm) which shows wire links that I recently visited in a purple apotheosis (vs blue, not visited links). Normally, these links remain purple until someone posts another response to this thread, and then it will change back to blue link (when the list page is refreshed or I revisit). But what is happening is more - links just stay "purple", even if the new positions will these threads over time and I have not revisited them again. Any clue?

    Yes, I looked at the page source and see only the links with the ID of a forum and a number of topic and possibly a starting incrementing in 50 value.

  • How to catch the movement of return on investment when the user drags a handful of return on investment?

    Hello, I use VDM2009 with c#. I need to make some manipulations of KING and need to intercept mouse movements, but do not know what to use. For example, suppose I created a KING OvalContour and that it is a circle (width = height). I have to do 2 things: 1) when the user drags one of the 4 handles, I need to check what handle is moved so that I can drag a few adjacent programmatically so that the circle is a circle and does not become an oval.

    (2) when the user clicks/behind the center of the circle, I need prevent the update so that the circle does not move the return on investment. (It would be even better if there was a way to disable the movement of the circle and allow the scale.) I don't know what to use to accomplish this behavior and do not know how to retrieve the KING handles about which is slipped. Any help would be very appreciated. Thank you, Neville

    Hello Ben,

    Thanks again for your help.  I looked up the definitions for the ROILeft, etc., in the reference VB help as you suggest.  While many objects is similar in setting/name, it seems that these objects (ROILeft, etc.) are those who are not easy to find how to use in the c# version.  But thanks for pointing me to the help file in VB Ref.  I wish, in there wasn't one for c#... I can't understand how to search effectively in the Visual c# help file that is integrated into Visual Studio.

    Thanks for your suggestion about the return on investment.  It makes sense, and I'll keep it in mind.

    In the meantime, I found a solution to my problem.  I use c# function public bool PreFilterMessage (ref Message objMessage) for prefilter mousedown and mousemove event messages.  Once I found one, I check if the cursor is on a part of the KING that I care.  If I want to do something special, I'm doing it right here.  If I want to keep the normal behavior of the KING OR on mousedown and mousemove, I trash the message.

    It's a total pain, but it seems that functions NOR are not put in place to do this kind of things in an elegant way.  Thanks again for your help!

    Neville

  • BlackBerry Smartphones Priv autorotation setting returns to portrait when the phone is turned off

    I like to keep the orientation of the phone to turn but will not hold the adjustment.  I change the setting for automatic rotation whenever I turn on the camera, but once I got disabling the phone setting goes back to the Portrait.  I have other Android devices, and I have a Z10 and Q10 and never had to put auto-rotation once.  I've been foolling around during almost two weeks now with the support of BB and all I get is an evasive.  (They answer as I am stupid and do not know the difference between the two icons.)  I changed the quick setting of parameters and display, it always comes back to portrait when the phone is off.  Does anyone have ideas on this?

    Hmmm... Well, I don't remember what is happening for me with this exact same build. All I can do is recommend you try again with formal support... something is wrong if she does that.

    Or, if you don't want to talk to them, another thing, you could try the BBVE app, to see if he can identify any problems:

    Otherwise, this has always been like that? If this isn't the case, then what has changed just before everything started? A new application? An update of a certain type? Something else? Think very carefully that the smallest thing could be causal.

    In addition, the only thing I can recommend is a reload of the OS, using what I call the "skeleton" procedure, in an attempt to circumscribe the precise causal element:

    1. Via the autoloader, load your OS "bare bones"... If everything is optional, do not install it.
    2. If the behavior is immediately, then try another OS with step 1
    3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
    4. Add one more thing - no matter how tempting, one.
    5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
    6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

    When the behavior shows up, you know the culprit... the last thing you have loaded.

    If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

    If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

    Good luck and let us know!

  • Oracle Text returns no results when the string begins with two consecutive vowels

    Hello

    I hope someone can shed some light on a strange problem, that we face.

    Oracle Database 11 g R2 (11.2.0.4) EE 64 bit running on Windows 2008 Server R2.

    When I create an index of context on a column varchar2 (surname), it works fine when the surname begins with a consonant or a vowel. But when the family name starts with two vowels, that it fails to return the file?

    Please see example below:

    create table t1 (surname varchar2(50));
    
    insert into t1 values ('OURS');
    insert into t1 values ('JOURS');
    insert into t1 values ('ONES');
    
    commit;
    
    -- sync every 10 mins
    CREATE INDEX PERSON_SURNAME_IDX ON t1
    (SURNAME)
    INDEXTYPE IS CTXSYS.CONTEXT
    PARAMETERS('MEMORY 50M sync (every "SYSDATE+10/1440")')
    NOPARALLEL;
    
    -- no rows
    SELECT surname 
    FROM t1
    WHERE CONTAINS(surname, 'OURS') > 0;
    
    -- 1 row
    SELECT surname 
    FROM t1
    WHERE CONTAINS(surname, 'JOURS') > 0;
    
    -- 1 row
    SELECT surname 
    FROM t1
    WHERE CONTAINS(surname, 'ONES') > 0;
    

    Any help or advice greatly appreciated.

    Thank you

    Ours is in the list of default stoplist (list of words that are ignored)

    http://docs.Oracle.com/CD/B19306_01/text.102/b14218/astopsup.htm#CEGBGCDF

  • Why windows search does not return a result when the file is of course in the folder my documents?

    Hello

    file search: KeyScrambler_Setup.exe
    search string: key - would find the above file
    search string: scrambler - cannot find the file!

    now I'm very confused. can someone pls tell me why? then I could correctly search and find my next record!

    Thank you! any help is appreciated!

    BTW I use win vista Home premium 32.

    and I tried the advanced search and selecting search loc: informed everywhere and all the other search criteria.

    Hello

    Windows Search does not work or research are slower
    http://support.Microsoft.com/GP/windows_search

    Troubleshooting Windows Vista search & indexing errors
    http://www.WinVistaClub.com/T24.html

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • View returns a value when the return is null

    I need a view that returns the following situation:
    ID   VAL
    1    A
    2    B
    Select VAL from my_view where ID = (?)
    If the ID is different from 1 or 2, then the value must be 'C' another thing 'A' or 'B' as ID

    Some tips on how I can do this?

    Concerning

    Assuming that the id is not null:

    SQL> variable id number
    SQL> exec :id := 1;
    
    PL/SQL procedure successfully completed.
    
    SQL>  select  val
      2     from  tbl
      3     where id = :id
      4  union all
      5   select  'C'
      6     from  dual
      7     where :id not in (
      8                       select  id
      9                         from  tbl
     10                      )
     11  /
    
    V
    -
    A
    
    SQL> exec :id := 2;
    
    PL/SQL procedure successfully completed.
    
    SQL>  select  val
      2     from  tbl
      3     where id = :id
      4  union all
      5   select  'C'
      6     from  dual
      7     where :id not in (
      8                       select  id
      9                         from  tbl
     10                      )
     11  /
    
    V
    -
    B
    
    SQL> exec :id := 3;
    
    PL/SQL procedure successfully completed.
    
    SQL>  select  val
      2     from  tbl
      3     where id = :id
      4  union all
      5   select  'C'
      6     from  dual
      7     where :id not in (
      8                       select  id
      9                         from  tbl
     10                      )
     11  /
    
    V
    -
    C
    
    SQL>
    

    SY.

  • Automation error: The object invoked has disconnected from its clients when the exe to exectuted the VB6 for the second time

    Dear all,

    I had this really common automation error when I run an exe file created by Visual Basic 6 for the second time. Whenever I ran the program for the first time that it works really well. But the second time always fails. When I ran in debug mode in Visual Basic 6, sometimes it worked. I checked the code and found it would be discontinued in the next part - CommonDialog1.ShowSave.

    ReDim SelectedVar (1 NumSeleVar)
    ReDim SelectedVarTxt (1 NumSeleVar)
    I have = 1
    For j = 1 To NumVar_GasPlants
    If chkOpt (j - 1). Value then
    SelectedVar (i) = j
    SelectedVarTxt (i) is chkOpt (j - 1). Legend
    i = i + 1
    End If
    Next J

    'Get the name of the export file.
    If not g_RunOutputMacro then ' check-out
    CommonDialog1.cancelError = True
    CommonDialog1.InitDir = curCasePath
    If IsMonteCarlo then
    CommonDialog1.FileName = "HourlyData_GasPlants_" & cmbYear.Text & "_" & cmbMonteCarlo.Text & ".csv".
    On the other
    CommonDialog1.FileName = "HourlyData_GasPlants_" & cmbYear.Text & ".csv".
    End If
    CommonDialog1.Filter = ' (*.csv) | * .csv.
    CommonDialog1.FilterIndex = 1
            CommonDialog1.ShowSave
    SelectedOutputFile = CommonDialog1.FileName
    On the other
    SelectedOutputFile = g_Output_FileName
    End If

    I have been tormented by this problem for almost a month. Any suggestions or ideas would be very appreciated!

    Thanks a lot guys!

    Hello

    This problem would be treated better in the MSDN Visual Basic forums. Expertise it can help you with this problem.

    https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

    Thank you

    Stephanie Podder

  • Forms/4GL tutorial returns not found server or DNS error

    Hello:
    I'm trying to plow through this tutorial (10.1.3.1.0) and when I run the SRList.jpsx page I get the error: cannot find server or DNS error. The URL produced by JDeveloper is:
    http://192.168.99.36:8988/SRTutorialADFBC-userinterface-context-root/faces/app/SRList.JSPX.

    Any suggestions?

    I've shot down the forums and the Web and cannot find a match. The nugget only that I can add, it's that I use JDeveloper with the extension of the OA framework. I've been successful creation of pages with the OA Framework and execution of their. Y at - it an incompatibility with OA and ADF framework?

    Any help is greatly appreciated!

    Mchrist,

    You may not use download OA Framework to develop applications of the ADF.

    I create two batch/command files: in each of them, the JDEV_USER_DIR value and other environment variables to point to a suitable location and run the JDeveloper.

    Just unzip JDev and OA Framework to separate places and make sure that the user for each directory is in a separate location as well.

    John

  • Programmatically move EXE file to RT-target and change the INI to start the EXE when restarting. Then the target restart RT.

    I'm trying to:

    1. download the rtexe on the target in real time
    2. download the file or - rt.ini of the RT target on the local disk
    3. change the RTApp.StartupApplication path to POINT to newly downloaded rtexe
    4. download the ini file edited to target RT
    5 reset
    6. the new rtexe should start to run

    When manually deploy the application of RT through the Project Explorer and manually restart the target RT works very well.

    However if I follow the steps above using the attached VI, to restart it does not start the EXE and loses the connection with the RT.

    When I try to reconnect, he said:

    "Errors were detected in the log of the target when connecting to the target:

    LabVIEW: (Hex 0x63B) target the RT has not enough memory to load the startup application. »

    Now why is there enough memory when the EXE is deployed through the Project Explorer, but not enough when the EXE file is moved manually?

    If there is an easier process or to achieve this goal, please suggest.

    Thank you

    Problem solved.  Problem was never in the INI file.

    Apparently using FTP "FTP Store Multiple.vi" used to move the file EXE to the rt to intimidate target must change the file somehow. Instead I just use the FTP "Put several files.vi" and everything works fine.

  • SELECT returns no results when there is a default namespace definition inXML

    Hello

    I have a problem that my select returns no results when there is a default namespace definition in my XML file.

    I'm using oracle 11g release 1

    XML file that is stored as a binary XML:

    < SIMS xmlns = "http://sims.ics.muni.cz" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://sims.ics.muni.cz jh_sims_matricni_vystupy_or.xsd" >
    < Vystup Datum = '2006-07-18' type = '2' Nazev = 'Last etapy' PocetStudentu = '1' PocetStudii = '2' >
    < Student RodneCislo = "8001011001" >
    Petr < name > < / name >
    < / student >
    < / Vystup >
    < / SIMS >

    This select return no results:
    SELECT s jh_sims_bin_no_schema student.jmeno, XMLTable ('/ the SIMS/Vystup/student ' PASSAGE s.OBJECT_VALUE jmeno PATH VARCHAR2 COLUMNS (10) 'Name') student

    When I remove the definition of default namespace (xmlns = "http://sims.ics.muni.cz") everything works well and even SELECT returns "Petr". When the file is stored in the storage object relational everything works great too!

    < SIMS xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://sims.ics.muni.cz jh_sims_matricni_vystupy_or.xsd" >
    < Vystup Datum = '2006-07-18' type = '2' Nazev = 'Last etapy' PocetStudentu = '1' PocetStudii = '2' >
    < Student RodneCislo = "8001011001" >
    Petr < name > < / name >
    < / student >
    < / Vystup >
    < / SIMS >

    Thanks for any help!

    Jan Hruby

    Lazy response:
    See the post "How to declare mapping prefix to namespace with XMLTable()?" in the {: identifier of the thread = 410714} stickied to the top of this forum.
    aka
    XMLTable (XMLNamespaces (...), "/ the SIMS/Vystup/student")

    Published by: A_Non on June 16, 2010 13:07
    Beat in a few seconds

  • If a view object query returns no rows, can the vacuum to be tested at all?

    All those who know or have also experienced:

    I guess that the answer should be Yes, but I tried anyway, I still didn't worked. Here is the code (it's a method behind a command button, a bean of support (I use JDeveloper 10.1.3.4).) In the code, LoggedInStudent is the name of a view object; ZBLCModule is the name of the application module):
        public String commandButton1_action() {
            FacesContext fc = FacesContext.getCurrentInstance();
            ValueBinding vb = fc.getApplication().createValueBinding("#{data}");
            BindingContext bc = (BindingContext)vb.getValue(fc);
            DCDataControl dc = bc.findDataControl("ZBLCModuleDataControl");
            ApplicationModule am = (ApplicationModule)dc.getDataProvider();
            ZBLCModuleImpl zblcam = (ZBLCModuleImpl)am;
            LoggedInStudentImpl studentsFound = (LoggedInStudentImpl)zblcam.getLoggedInStudent();
            
            String navCase = null;
            
            // Test (1): if the view cache is empty; always bombs up the application if it IS empty:
            if(studentsFound.getAllRowsInRange().length == 0) {
                navCase = "userNotFound";
            // (2) The following three tests gets to run only when the cache is not empty; they work fine.
            } else if (((Number)studentsFound.first().getAttribute("HoursAttm")).floatValue() == 0.0) {
                navCase = "noHours";
            } else if (((Number)studentsFound.first().getAttribute("Balance")).floatValue() > 0.0) {
                navCase = "notZero";
            } else if (!(studentsFound.first().getAttribute("Validated").equals(" "))) {
                navCase = "validated";
            } else {
                navCase = "zeroBal";
            }
            return navCase;
        }
    When the view object query returns a line, the whole of the application works without error. When the query returns no rows, test (1) always bombs toward the top of the application, prompting a Houston-30003 error.

    (1) test, I tried the following:
      if (studentsFound.getAllRowsInRange().length == 0)
      if (studentsFound.first() == null)
      if (studentsFound.getEstimatedRowCount() == 0)
      if (studentsFound.isDead()) //I do not know what isDead() does; just tried desperately.
      if (studentsFound.equals(null))
      if (studentsFound.getCurrentRow() == null)
    With each of these events, I got an error of Houston-30003. It does not matter what looks like the conditional test; It is important only when the objects from view cache is empty. If the view cache is not empty, everything, including the test (1), works very well. And when the cache is empty is not because of the failure of the connection to the database, but because the student is not in the data table and line are for the student.

    It is a requirement of the company to do something when the view object query returns no rows. Can it be tested at all? How?

    Or is there something wrong in the first lines in the method before the {color: green} String navCase = null; {color} line?

    Thank you very much for your help!


    Newman

    Hello

    What you have done, is to get a handle to the object that CAN execute queries to the database.
    However, you do not query the database.

    Just add:

      LoggedInStudentImpl studentsFound = (LoggedInStudentImpl)zblcam.getLoggedInStudent();
      //New line
      studentsFound.executeQuery();
    

    The code that Shay has given you is when you do not have a request for all module, but since you are talking about a command etc button I guess that the module of the application is already active.
    The line I gave you should be enough to make it work.

    I'd be careful with the

    studentsFound.hasNext();
    

    I suggest to use estimatedRowCount();

    -Anton

Maybe you are looking for