Launchpad launch - Macbook Pro Yosemite

Similar Questions

• MacBook Pro (Yosemite 10.10.5) suddenly very slow, Help!

  Hi all, I have recently been faced with a problem hindering my Macbook Pro 13-inch mid-2012. I was using my computer - as I do regularly - watch videos, listen to music, play video games, etc. (the usual activities of the summer), and my computer seems slow down suddenly. The videos are now restless and I have to wait an excruciatingly long time to load. He is fighting same - showing the Rainbow ball of death - when I open a new finder window or a tab on Google. Start the system also takes at least twice as long as he had done before. So I went looking for a solution to the problem. I updated my computer to Yosemite 10.10.5, as I had not updated for a while, erased some decent space on the permissions of my 500 GB HDD (105 GB free space), checked and readers on the disk utility and tested my material on Apple Hardware Test. Nothing I've done seems to fix or help the problem. I got this computer from early 2013 and have had a few problems with the computer, but nothing I couldn't fix easily, so when I couldn't find the solution to my problem with hours of violin, I thought that I would like to ask the community. Is it typical, is there a known solution? If this is not the case, what can help? Let me know if you need additional information about almost anything. Thank you!

  Specifications of the computer:

  ---------------------

  OS X Yosemite 10.10.5

  MacBook Pro (13-inch, mid-2012)

  Processor: Intel Core i5 2.5 GHz

  Memory: 4 GB 1600 MHz DDR3

  Graphics card: Intel HD Graphics 4000 1024 MB

  You have anti-virus software installed?

• How to reverse my previous update on my MAcBook Pro Yosemite OS X10.10.5

  On 16 July 2016, I've updated my adobe flash player. After that time, I had an ads in my tool bar that the name is Megabackup continuously popup on my screen all the time. I tried to delete it, but without success. My question is how do I restore my system to the State that was before this update? Thank you.

  Before attempting to restore to an earlier date, try
  How install (really delete) adware
  https://discussions.Apple.com/docs/doc-7471

  Stop advertising and pop-up advertising windows in Safari
  https://support.Apple.com/en-us/HT203987
  Adware removal Guide: Identification
  http://www.thesafemac.com/arg-identification/
  Next if necessary:
  Malwarebytes Anti-Malware for Mac
  https://www.Malwarebytes.org/antimalware/Mac/?gclid=CjwKEAjw8qetBRCj6vKH8IC_kwoS JADGQ8dSXC2m8LzIJ_6AwtK7xznQOvkb7qN3FBqVS_jjw8JcdhoCCqDw_wcB

  It seems that you have downloaded Flash else than Adobe

  https://get.Adobe.com/flashplayer/

  and adware download included

• HP Laserjet 3050 will not install on MacBook Pro Yosemite

  Cannot install the printer. Get the following error message:

  Cannot find the appropriate software after software update running. But the software appears in my updates?

  Thanks for your comments.

  Hello

  In the Apple menu click on App Store, and select software update.

  Click on the main menu of the Bank and then reload the page and install any update HP or Apple listed.

  Once you have finished, try to add the printer in Printers & Scanners again, then follow the update of the software once more to make sure that the latest drivers have been installed.

  Please check if this can work, if the same continues to try to install the drivers manually from the following link:

  http://support.Apple.com/kb/dl907

  Once you are done try once more adding the breeders & Scanners printer and check for the difference.

  Please let me know the results.

  Shlomi

• I have MacBook Pro osx Yosemite, version 10.10.5. After I login I wonder to provide password string key. Why? It is a demand relatively new. Of FestivalMag

  I have a MacBook Pro, Yosemite OSX version 10.10.5

  Processor 2.2 GHz, Intel Core 17, memory 8 G GBAfter I connect, the Keychain password, asked for the exploitation. It is relatively new, about 6 months. It is an extra step. Why?

  FestivalMag

  Initially, the password to keychain and your password are identical.

  If you change the password for the connection in an unusual way, it is possible that the Keychain password is not being updated at the same time. Your stored passwords are encrypted and are kept under the old password. You can update the password in the keychain if you know old and new passwords. Otherwise the content of the old keychain died for you (and everyone stays that way).

• CS3 will not install on new Macbook Pro running Yosemite

  CS3 Design Premium will not install on the new Macbook Pro, Yosemite running.

  I have discs. I'm installing from an external drive.

  I get an error message 'contact support '.

  Support sent me here.

  I tried the download link, but this page has an error and does not load.

  Any advice.

  @ Freddie

  I could solve this problem.

  You are using Safari, the link to get to the error you receive. I used Firefox and the download worked.

  The program is installed without problem.

• MacBook Pro at Cinema HD Display

  I want to use an Apple Cinema HD Display model M8536 with my MacBook Pro Yosemite running with the last OS update, but how to connect the two? I tried a USB cable between the two, but it didn't work. Suggestions anyone?

  You need to adjust the monitor/DVI ADC port and may need a second adapter according to which ports are the computer.

  (142946)

• How to unzip file on Macbook pro

  Hello

  I'm trying to decompress a downloaded file (Korg keyboard firmware update). I open the file downloaded with the finder, click on the zipped file and one), select "Open with archive utility" or b), double-click the zipped file. in both cases, the file is recognized and begins to unzip and then an error message appears: "unable to expand (1 operation not permitted error)."

  Forbidding to me after ' £ooo on mac gear, I would be eternally grateful if someone could give advice how to perform a simple operation but as a file downloaded from the internet on a Macbook Pro, Yosemite 10.10.02 running.

  I really hope that there is already enough mac software somewhere to do!

  Thanks in advance for anyone who is kind enough to help. JM

  Kronos provide firmware for Mac as a dmg, firmware for Windows file is provided in the zip file.

  Download the Mac dmg file.

• (End 2007-leopard) IMac for macbook pro (end of 2014)

  I want to connect my imac (late 2007-leopard) for my macbook pro (yosemite end of 2014) in order to use the screen of I have mac because the macbook screen. Is this possible?

  No, not directly. Target display mode requires an iMac 2009 or newer to run. It will not work with an iMac 2007.

  Use your iMac as a display with the target - Apple Support Display Mode

  You might be able to use a software like ScreenRecycler, but there may be lag if your network is not fast enough.

  https://www.screenrecycler.com/ScreenRecycler.html

• I am on a MacBook Pro mid 2012, Yeosmite 10.10.5, I want to switch to Sierra and am nervous to do when I had a terrible experience upgrade to Yosemite.  I have everything backed up on Time Machine. Can you please advise me?

  I am on a MacBook Pro mid 2012, Yeosmite 10.10.5, I want to switch to Sierra and am nervous to do when I had a terrible experience upgrade to Yosemite, support with gratitude by Apple in charge.  I have everything backed up on Time Machine. Are there steps of preparation I need to do before you download and upgrade to Sierra.  Can you please advise me please?

  N ° so you have a backup if something goes wrong you can return to Yosemite.

  Only concern is that some devices, including USB that may require the updated drivers, but these records are not always available

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• It did not work on Macbook white 2010 or 2010 MacBook pro installed in El Capitan and Yosemite respectively y at - it something special for these releases?

  Apple hardware test does not on macbook pro or macbook, 2010, 2010. Both run 10.1 and 10.10, respectively. Wielding D in power does not launch apple hardware test as advertised. s he is weaned something special to do?

  Thank you

  Alex

  For versions of model before 2013 diagnostic test uses a different method.

  Two different media cover aspects There are reasons

  Why the AHT vs diagnoses may not work in some models of the year of construction.

  And with specific systems, the recovery partition (or lack thereof).

  • With the help of Apple Diagnostics - Apple Support

  For computers shipped with OS X 10.7 or earlier, the test is on the

  Press Kit of included system disk; If you start from there to run the test.

  • With the help of Apple Hardware Test - Apple Support

  • Finding material defects: explore Ardourel & Apple Diagnostics

  Before you run AHT /Apple Diagnostics. By controlling both the software and

  distribution of material for its systems, Apple is able to optimize the two halves to work...

  http://computers.tutsplus.com/tutorials/finding-hardware-faults-exploring-AHT-AP ple-diagnosis-mac-60456

  There are some methods and ideas in the articles above.

  A reason for the question, you face, is the vintage material & macOS they shipped with.

  Good luck & happy computing!

• Can I have both Yosemite and El Capitan, installed on separate partitions on my Macbook Pro?

  I want to upgrade my Macbook Pro (Intel Core i7 2.8 GHz, 16 GB 1600 MHz DDR3) to El Capitan. However, I have an important piece of the software - Avid Pro Tools HD 11 - which runs on Yosemite, but not on El Capitan. Can I create two partitions, each containing one of these two operating systems and then choose to start the partition of Yosemite, when I need to use Pro Tools? If so, how should I do this? Is there a support article, I can read to help me? Can you Yosemite partition contain only the BONES of Yosemite, and the rest are on the other partition? Thank you.

  Yes, you can run them both. I guess the process is similar to this:

  http://osxdaily.com/2011/03/12/how-to-install-dual-boot-Mac-OS-x-10-7-Lion-and-1 0-6-snow-leopard.

  Having two OSs on separate partitions is like owning two computers, they are completely separate. You want to see in the two places will have to literally be in two places. Copy the files from one OS to another will be facilitated by a USB stick as if it were two separate machines, for example.

• How to install Yosemite or Mavericks on Macbook Pro 2.2

  Help! My friend gifted me an iBook and I can download it on iTunes, but I can not read it there. Yikes! I need to update my OS X somehow.

  I have a Macbook Pro - 2: 2 apparently is a model of "end of 2006". It has an Intel Core 2 Duo processor and 2 GB of memory. He is currently running 10.6.8 but I need to upgrade to a system that can read iBooks.

  When I read the requirements of the formal system of El Capitan, he seems to satisfy them, but when I try to upgrade via the App Store of Macintosh, downright tells me that this computer can not run El Capitan. I think that iBooks became beginning of functionality with the Mavericks. Then...

  Is it possible for me to move on Mavericks or Yosemite on this machine? I searched for them on the App Store, and nothing comes up. I guess it has a download page for the old system somewhere on apple.com, but dammmmed if I can find it. A pointer to such a page would be wonderful. If you can assure me that this will result in being able to read my gifted iBook, it would be even better. Thank you!

  No, it isn't.

  (141821)

• HP 4645: No color printing on MacBook Pro with Yosemite 10.10.5

  My HP 4645 does not print the colors of my computer, even if the test page prints color.  I have a MacBook pro w/Yosemite 10.10.5

  I went on the link of beta and did not find anything specific to my problem.

  Help, please!

  Welcome to the HP Forums @JWays! I'd love to help you print in color from your Mac. I understand that you are able to print in color test pages but when printing from the computer your impressions with no color. Did you install the full feature software and driver, or you use the Apple software update? Also, you use the AirPrint driver, or the driver HP.

  Please follow the instructions below to check which driver you are using and change:

  1. Click on the Apple and then click on System Preferences.
  2. In the hardware section, click on Printers and Fax/Scan. The Print & Fax/Scan dialog box opens.
  3. Click on your printer if it is selected and find beside 'type' to see which driver is used.
  4. If you see AirPrint, remove the printer, then click on the small symbol to add the printer back again.
  5. Choose your printer and click on the drop down next to the 'use '. You will see the option to choose your printer in this "use" drop down. The image below is a screenshot of an Officejet printer, but help to display my description.

  If you see the HP printer that is already in use and not AirPrint, deleting the printer and add it again using the AirPrint driver. This will help isolate the driver as the first cause one way or other part.

  If this resolves the issue, please click Accept as Solution below; If not, let me know and I will do everything I can to help.

• I have a Macbook Pro, with Yosemite.  I want to buy desktop software but so many bad reviews online.  Should I buy 2011 version instead?

  I have a Macbook Pro 2014 and I use OS 10.10.5 (Yosemite).  I have an older version of Office (2008) and you want to upgrade.  But I saw a lot of bad reviews of the version of 2016.  Should I buy the 2011 version or the version of 2016?  I mainly use Word and Excel sometimes.

  Initially, there are problems with Office for Mac 2016 and El Capitan, but those who seem to be resolved.

  I myself would get 2016 later if I wanted an Office for Mac.