Layer Styles Panel is not set by default, nor is he has adjusted
Hello:
The Panel in Photoshop layer Styles is not defined by default. in other words, when I click on a layer called the Panel of the LS, rather than being set to 5px > 0% shade > 5px is 21px > 0% > 21px and so on.
I clicked on reset to default inside the LS Control Panel button, but it does not.
So, I tried to click Alt + Ctrl + Shift while starting with the Ps, but that did not help either.
This sounds like a problem preferably?
Any other suggestions?
Thank you for your time
Hi all...
So, the reset button in the Layer Styles Panel never reset the default settings. But after trying several times, I was able to manually enter the settings, I thought I recalled being the default settings, and then clicked the button by default do that finally worked.
Tags: Photoshop
Similar Questions
-
Hi all
I am a beginner for Jdeveloper and ADF, I installed Oracle XE and Jdeveloper11g R1 in practice.
I created the application, under the model, project Viewcontroler, created components BC and made mapping.
Now created new page and tried to expose VO (from data control) on the page, immediately it's end with the error message saying "invalid parent for the element af:document element.
I found that the problem with the tag < f: view > isn't there (not defaulted) under the tag root, by go - ogle.
My question is why < f: view > tag is not set by default when creating the .jspx page.
is there any work around to avoid this problem, because every time I can't add this tag manually to the new page?
Thank you
Aurore
You are created JSP, not the a jsf page.
Here's what you'll need:
-
PS CC 2015: Settings/Styles Panel does not appear.
As indicated in the title, the settings/Styles Panel does not appear. PS CC 2015.
Thoughts and suggestions?
Thanks in advance.
I feel quite the model. Just go to the window in the top bar and in the drop-down list, click settings.
Simple solution! Thank you!
-
printer is instaleed but not setting as default printer
printer is installed, but do not set as the default printer
Hello
This should help you:
'Change the default printer'
http://Windows.Microsoft.com/en-us/Windows/change-default-printer#1TC=Windows-7
To select a default printer
Open devices and printers, click Start , and then, on the start menu, click devices and printers.
Right-click the printer that you want to use and then click on set as default printer. (You will see a check box on the printer icon, which means that it is now your default printer.)
See you soon.
-
Unable to print, printer is not set by default
Original title: printer
I can't print anything, because the printer is not checked by default. Single note send is checked
as a default value. How can I get the set of deskjet 4500 as a default?
Hello Lucille Jackson,.
1 did you change on your computer before the show?
2. If it works well before?
3. you receive an error message?
Method 1:
Check out the following link to find out how to set a default printer in Windows 7.
Change your default printer in Windows 7
Method 2:
Perform the troubleshooting steps from the following link for printing problems.
-
CAN about: config to show me everything that is not set by default?
I don't know what could have been modified by me in the past. I want to see all parameters that are not in the default state.
The topic: config page shows all the available preferences.
Pref. who do not have the default value shows as a user defined (in bold).
You can click the report header to sort comments: this column config page. -
Layer styles Photoshop 2015 not appearing is not in CS6 on a pixelated text layer
It made by a mistake of text at the beginning when I open it. But if the layer is rasterized should elsewhere?
Thanks in advance
If it's a layer style and your text has a fill (all-solid), you can put the text layer in a group. Add your new layer for the group style. Add the desired above the Group fill color and hang it on the group.
If the text has been rasterized, you can just lock the transparency of the layer and then fill the entire layer with any color you want also, then add a new layer style.
These two things will work with CS6.
-
What to do if "audio device is not set as default" and I can not burn CD?
Hello whistles!
Love of goodness, my CD drive was not capable of writing to CD or to play, since the day that I bought my computer (5 years ago)! The last time I tried to install a program from a CD, which works well. I tried to troubleshoot and repair several times, without success, including downloading the new drivers. MS FixIt Center was no help either (no surprise).
And frankly, because I have more than one, I do not yet know what program to try to use it to record CDs, once the problem is resolved! I have Windows Media Player, Sonic Digital Media, Windows Digital Media Enhancer, Media Center (which I hate!), AShampoo Burning Studio (which I downloaded at any given time) and OverDrive Media Console!
I have a HP Pavilion dual core 64-bit processor, run Win XP Media Center version 2002, Service Pack 3, Office 2007 Pro.
Any assistance would be MUCH appreciated! And if you need more information. in order to make sound suggestions, please let me know before you answer (often when I ask for help here, I receive replies that are not applicable to my problem).
Thank you in advance,
Dharma
To burn music CDs or data CDs... the freeware
CDXurnerXP works for me.(FWIW) It's always a good idea to create a system
Restore point before installing software or updates)CDBurnerXP
http://www.CDBurnerXP.se/
(Yes, it works on XP, Vista, 7)CDBurnerXP to make Audio disc
http://CDBurnerXP.se/help/audio/compileaudioCDBurnerXP create data disc
http://CDBurnerXP.se/help/data/compiledata
(the green bar at the bottom of the screen
turns red if you add too many files) -
HP1510 0 x 00000709 can not set as the default printer
I installed my new HP1510 printer on computer with Windows 7, but I can not set as default in Control Panel printer, get error message 0 x 00000709. This means I can't print a PDF file as my previous printer, which I uninstalled it, is always shown as default in Adobe Reader. I can print emails ok. Please help as I bought the computer to print a PDF file!
Hello lanto17,
Welcome to the HP Forums!
I understand that you cannot set the default printer and are experience PDF problems. Please, try the following steps to answer all your questions:
Click Start, type Regedit in the search bar. Right-click on it and choose "Run as Administrator". Now, find the following key:
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
You will need to give this key all permissions. To do this:
(a) right click on the key that you need to change and/or delete. Click on "permissions...". »
(b) click on 'Add' in the window that appears.
(c) there will be an empty box under "enter the names of the objects to select. Type "Administrator" (without the quotes), then click on "check names".
(d) an administrator name appears, click 'Ok' when it does.
(e) you should be able to select the profile (click) the administrator under "group or user names. Once you click on it, click on "Advanced".
(f) click the 'owner '.
(g) click on the Administrator profile, then put the checkmark in "replace the owner of subcontainers and objects".
(h) return to the "Permissions" tab, then make sure the Administrator profile is selected.
(i) in the "Permissions" tab, put a check in each box available. Boxes will probably accompany "Include the permissions that can be inherited from the parent to this object" and "replace all permissions of child object with permissions inheritable of this object.
(j) then click on 'change '. Put a mark chark in "Full control" under allow. Click Ok. Now click on apply (you may receive a message of Security window, simply click 'Yes'), and then click Ok.
(k) out of the registry, and then restart the computer.
The last step is to restart the print spooler. To do this, type services.msc in the search bar. Right-click on it and choose "Run as Administrator". Find print spooler and stop it, then start it.
Now try to set the default printer like PDF files and printing. Let me know what happens. Thank you!
Have a wonderful day!
Mario
-
"set as default printer" is not an option
My default printer some how was chosen as OneNote 2007. I tried to change my default printer to the one I want, but it won't allow me. I clicked on the printer that I want to and it gives me an accurate list options but not "set as default printer". Please help me fix this because I can't print until this problem is corrected.
Try right click on the printer you want to sometimes - it seems there are two menus and it seems random as it appears. One contains the option, the other does not. Try several times - and then set it aside and try again. I think at some point, you will get the correct menu and be able to make the change.
In the meantime, certainlly you can print. Just use the file / print option where you select the printer and choose the one you want to print on (you cannot use the "print" button, but you will still be able to print).
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
audio device is not defined by default
Hello people. I had a lot of trouble with my audio recent and the most recent problem is that my audio is not working properly and when I walked into the audio settings to test the volume controls that were set at the max I sometimes hear a low ding through my headphones. When I try to hear the ding once, I get nothing = / I looked in audio updates, but none of them seem not at this address. the strange thing that I can't understand, is that the audio settings to say that everything works. When I tried to troubleshoot I got this message "audio device is not set as default ' I looked in the settings again and can't saw no trouble. I use a pc laptop hp pavilion g7-1365dx. any idea would be appreciated
I have it! seems so simple now... after the last 2 idea you I gave does not, I went into the details of the system audio just poking around again thinking it might hurt only is more then I had. I found myself for the 100' e times at least on the tab enchancments and just clicking on things I ticked 'disable all enhancments' even if it us no equity and applied, and boom, problem solved for now at least. Thanks for doing your best to help!
-
I CAN'T FIND MY PRINTER ALL - IN - ONE - PRINTER SERIES. It is SAID IT is THERE, BUT SAYS NOT SET AS DEFAULT. What does that mean?
Hello
-What is the exact error message you see when you try to print?
-This work was fine before? If so, what are the changes in software/hardware on the computer?
-What version of windows you have?If she says that a printer is not set by default, this means that there is no recognized printer or the printer that is there is not yet defined as a default value. Here are some steps that might be tempted to solve these problems.
Method 1: Diagnose and automatically fix problems printing and printer
http://support.Microsoft.com/mats/printing_problems/
This see below mentioned articles that may help you in the matter of fixing.Method 2: Solve printer problems.
You can use the link as a reference which may help you fixing the issue below.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
First of all, try to uninstall the printer drivers, then unplug the USB cable from the printer and then try to install drivers from the Brother Solutions and plugin site then the cable and then try to print.Method 3: Download the drivers from the Lexmark Web site
You can also try to download the latest drivers for the printer from the lexmark support Web page and install.
http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_USI hope this information helps!
-
How to set a layer style and not have some shape layers overlap?
I don't know how to explain this very well, but I've created a mp4 to demonstrate what I worked on. I want to make sure when I apply a shadow effect drop, that all layers are affected but aren't above the knees. It is the video.
When you want to delve into problems the first thing we do is select all the layers that you have problems with, press the U key to reveal all changed properties and analyze what you see in the timeline panel. I guess right here because you don't have given us no indication of your workflow, but it makes sense that you have applied the two-tier drop shadow layer style. I'm just guessing that you used the Layer Styles and not the effect due to the title of your post.
Since you already have the animation and now want to add a drop shadow the best thing to do would be to compose two layers prior shape and then apply a layer style or effect to the demo. Looks like you have the shadow applied to all text as layers so it would make sense to dial previously all layers, you want to have
I probably would have used a rectangle rounded, converted the rectangle rounded for a Bézier path and the shape of the path of animation and used paths pads to get the circle to rectangle rounded on a layer of simple shape animation but I certainly would be made first before you add the same effect to all layers.
-
The drop shadow layer style angle setting back to default when reloaded into the new file
My question is how do to prevent the following occurs. I created a shadow layer style in a file .psd with the parameters below.
I saved it in a file .asl I could use later. When I loaded it in a different .psd file later that day there, some parameters have remained the same, but the angle back to 30 degrees to 120 degrees all on its own, as shown below.
I just want to know how to keep the layer style settings I recorded in a file .asl return parameters when loading in a new .psd file.
My systems settings are as follows:
Photoshop CS6 extended Version 13.0 x 64
Mac OSX 10.8.2 with 705,44 Go off 749,3 GB available
The only other software I am running is Safari web browser
This is my first time trying to save a layer style and use it in a .psd file different than the one I created in.
Kind regards
Nikki Gutierrez
First thing you should do is update photoshop help > updates in in photoshop cs6, as many bugs have been fixed and your always on 13.0
(not that your description is a bug, but version 13.0 had a lot of glitches that will drive you crazy when you meet one)
Also, overall lighting can be different from one document to the other as you use global light selected in the drop shadow dialog box
Layer > layer Style > Global light > corner
See if uncheck Use Global light makes all the difference
-
I get the same error when you try the same thing with the default styles, the file is not.
You can load the layer style using the Styles Panel using load or replace Styles.
Window > Styles
You can also put the asl file in any
/ Applications/Adobe Photoshop CC 2014/Presets/Styles
or
your user library
/Users/ Your user name Application support/Adobe/Adobe Photoshop CC 2014/Presets/Styles
so that it displays in the menu styles all the time
http://helpx.Adobe.com/Photoshop/using/layer-effects-styles.html
Maybe you are looking for
-
How can I disable a shortcut that says 'open in Internet Explorer' and default back to FF
I use FF as my default browser. A few shortcuts work best in Internet Explorer, so I select the option 'Open in Internet Explorer' and it works fine. Now I would like to cancel one of these shortcuts and opened it in FF by the original. I tried to de
-
Toshiba virtual Store account Reset - 33909
Please reset--> Toshiba Virtual Store reset the account - 33909
-
I have an Optiplex 390 and I need to upgrade the video card. I am visually disabled and need to upgrade to run special software correctly. Someone recommended the GeForce GTX 650 Ti 2GB GDDR5 PCI Express. I'm a little nervous going into the bowels of
-
Changeover CUE in a redundant configuration CME 4.0 scenario
Hello can describe someone, please, what happens to CUE vm in the case of a failover to a redundant router of the CME. I suppose that Router 2 must have identical boxes VM created and all new than VMs will be stored on the Router 2 until the 1st rout
-
HowTo: Define and provide a personalized service with disjoint / port range.
I have a rv180 and I'm trying to implement a custom service that contains multiple ports two disjoint (some UDP some TCP), as well as a range of TCP ports. This has lead me to a few questions. (1) is it still possible to have a unique personalized se